I have broken my Lumia 535 so I must use my friend's Galaxy Ace.
Phone won't run system - it automatically turns into recovery mode.
There is less options I usually see in recovery mode - no advanced options, etc
I tried to use Odin as internet told me to do.
When I use Odin 3 1.8.5, it see my phone in download mode (yellow color) but I can't do anything and I don't know what to do... I put files i get there, there are places for files: PIT, BOOTLOADER, PDA, PHONE, CSC
So I put these files (I got them all). I marked: Re-Partition, Auto Reboot, F. Reset Time. Unmarked was: Phone EFS Clear and Phone Bootloader Update.
When I press "start" the process was succesfully and took only 10 seconds! After disconnecting the device, it still has problem with running.
So I tried to mark different options, some has the same result, some you paused on "Send lock information.." and I waited about 30 minutes, then disconnected. Still the same problem...
When I use Odin 3 v3.0.7, the phone connection is blue. I put there PIT file and .tar.md5 file in PDA. I got this:
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
And there is nothing more, so I am disconnecting phone now...
Still the same problem, can't run.
I got a folder nammed "Odin for GT-S5830" with some files, and low-weight app called "Odin_Multi_Downloader" and this app doesn't see my phone.
Can somebody help me? I really need a phone
It's GT-S5830i.
What software should I use, what files I need, where to put them and what to do next... Sorry I really can't do that by myself, I tried for some hours to google my problems and I'm still here...
Sorry for my horrible English.
Update:
I got this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830i_XXLI1.tar.md5 is valid.
<OSM> MODEM_S5830i_DDLI1.tar.md5 is valid.
<OSM> CSC_S5830i_ODDLI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> param.lfs
<ID:0/004> system.img
<ID:0/004> BcmCP.img
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> csc.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
after doing everything from this video: /watch?v=-KbApI9t1T0
Phone has restarted by itself and can't turn on. There is some blue text ended with "Appling Multi-CSC: there are common apks" and it stays...
What to do?
Related
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Now that it flashed in Odin successfully can you get into the stock recovery? Sounds like you need to do a factory reset if you can get into recovery.. If not take that piece into Verizon they will give her a new phone
Sent from my SCH-I605 using xda app-developers app
Fixed it, I had to odin my s3 back to stock in order to get that verizon upgrade assistant program to install and I connected note 2 in odin mode and did a repair device which basically wiped it for me and its working again ^_^
RedRumy3 said:
Phone was never rooted it was my mom's phone and she decided to update to 4.3 today and well now it's stuck on note 2 splash screen. I can't enter recovery I can only enter download mode.
So I downloaded 4.3 Odin file and flashed it and it passes that and reboots but still gets stuck. I also tried flashing that pit file with Odin and it's still stuck.
Is there any other way to fix this or am I gonna have to bring it in to Verizon and have to pay to fix it?
Click to expand...
Click to collapse
The real question is are all your buttons working properly? if you are in odin mode and done a flash, you now have to go into recovery mode and wipe out other things from the previous update so you are not stuck,
First, apologies if this has been solved somewhere on the forum, as I haven't been able to find it.
My rooted Verizon S4 became unstable a few weeks ago; random re-starts, bizarre battery draining, inability to re-start unless connected to a charger, etc.. I did a factory reset and the problems persisted. I installed Kies and downloaded the original stock ROM, but Kies was unable to connect to my device. After poking around online, I ran Odin and tried to flash the stock ROM that way. Here's how that went:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now when I start the phone, I get the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." message. Only Kies won't connect to my phone so I have no idea how to proceed.
If anyone has any suggestions, please help! I'm sure I left out some pertinent details, so let me know what else I need to tell you...
Had your phone been updated with any of the OTAs? It appears that you attempted to flash the original MDK firmware. You cannot downgrade to MDK, if the phone had been updated.
Actually I do think it got the latest update after I'd done the factory reset.
Are you saying I have the wrong tar.md5 file?
so I tried this, based on another recommendation: http://forum.xda-developers.com/showthread.php?t=2735172
the phone is at least operational again. however it's still re-starting randomly, but will not stay on after a re-start unless plugged in to a charger (battery at 80+%). not sure how the OS can still be corrupted if I just re-installed it; could something else be causing it to be so unstable?
I had/have a virus that persists through all types of recoveries that I could find and try. The virus would install multiple apps and the phone would restart constantly.
I then tried Odin, put the device into download mode (pwr btn, vol dwn, home) and it started saying "downloading... do not turn off target" with a bar that would not move. This was different from what I was expecting from the guides.
I connected the device to my PC and tried to use Odin, loaded up the package? and device was showing connected in odin. The file analysis seemed to work, so I hit start and nothing changed on the device. Odin fails after a few seconds. I then try turn off the device and now comes back with "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" with the same not moving bar.
Top left of this screen is:
Code:
ODIN MODE
PRODUCT NAME: SM-T330
CURRENT BIRNARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWERV: S1, T1, R1, A1, P1
UDC START
Kies tells me the device is not compatable with Kies.
I'm stuck, please help.
Some Odin output:
Code:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T330XXU1ANE8_T330XSA1ANE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
the rom you try to odin is kitkat, if you are coming from lollipop you need to activate the repartition option or you can try to flash android 5. if it still fails msg me.
sub77 said:
the rom you try to odin is kitkat, if you are coming from lollipop you need to activate the repartition option or you can try to flash android 5. if it still fails msg me.
Click to expand...
Click to collapse
I cant turn off the device or do anything. Its stuck on the screen which I described last.
I dont know which version of android was on the device.
I let the tablet die and it came back to the same thing
try different usb cable & ports and if possible try kies recovery from another pc, too.
http://www.android.gs/update-verizo...-official-android-4-4-2-vrufnd7-ota-firmware/
i ve been trying to update my phone it was updated successfully now it is justs stuck on boot loap again and again its showing just GALAXY NOTE 2 i treid to get it in recovery mode i couldnt :S it is going to download mode only can you please tell me how can i get out of this loop assap :S
i am trying to install the stock rom
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
but its getting stopped on recovery it says failed :S can anyone help me to get my phone runnin?
i ve tried to install the alternative version and it says this software does not made by verzion something like that. Can anyone would help me get my device fixed?????
when i ve joined this forum back in 2009 people used to help each other now no one gives a dam.!
i FIXED IT BY MYSELF
hi_john said:
i FIXED IT BY MYSELF
Click to expand...
Click to collapse
how did you fix it?
Ive been having the problem since i rooted it via iroot on my phone.
its a note 4, SM-N910F. Ive tried many things to get it out of the loop for example hard reseting it via recovery mode but everytime i try it the page dosnt show up it goes to download mode and with an error saying couldnt boot normal mode.
ive tried to download stock firmware and flash it via odin but everytime i try that it gives me an error, i dont know if its the wrong firmware i downloaded or its the phone itself. on sammobile i couldnt find the firmware i was looking for because i live in australia and there is no international one available,if anyone could help me out it would be greatly appreciated.
This is the error message from Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i forgot to mention this but when i tried to fastboot it happened, that was the problem that caused it to go in a boot loop