Hello, I've hard bricked my Samsung S6 EDGE and I have no idea how to recover it. I have been all over the web for 2 days straight and Im kind of starting to lose hope on it. What hurts me the most is the effort it took me to get it. If anyone would like or knows how to help please don't hesitate to come forward.
Search for s6 stock recovery.img and flash it via odin or jodin, then reconnect it via smartswitch to reinstall stock rom.
Are you sure it's a hard brick? Are you able to turn on your device? If so, your device is recoverable via Odin otherwise it's not. . .
Hard-Brick ------ Bootloader is corrupted, your device is permanently dead and unusable.
Soft-Brick ------ Freezes to "Samsung . . . powered by Android" or Bootloops to samsung logo. .
Related
my rooted galaxy s3 with some rom modification is getting software update
i am on the stock rom last week when i got update i cancelled it but now its not even getting cancelled
if my phone updates it will get bricked
what can i do reply fast it's updating right now
reply fast please !!!!
this is going to be a soft brick or hard brick ?
Soft brick, and I don't think you can just stop it without doing a soft brick, just see if this rom modification is removed, and if it does not work boot into download mode and flash a stock rom, if download mode does not work you can use a usb jib to get into it, you should be fine, I highly doubt a hard brick.
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
donsemaryy said:
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
Click to expand...
Click to collapse
perhaps a USB Jig may be of use to you in this situation to get you to download mode (Check my sig if you need a USB jig)
once you go to download mode, you can get to flash a stock firmware from odin
cheers!
By bricked doesn't that mean it's better off at a repair shop?
Since you can flash through odin. Tried flashing stock fitmwares? there's a site where you can download them.. Google.
Bricked ??? the OP may just be saying fully bricked without knowing .
Service job is paid for no warranty .
OP does not mention recovery mode .
jje
just try to go to samsung center and they will give their warranty. because they can get into download mode too so they can check your binary count dude
Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
I have had my gs3 fixed before with the sdcard bootloader file but i cant get it to work this time. dose anyone know how to un brick a galaxy s3 I535 without jtag. i can not get into recovery, the phone will buzz when the sdcard with the bootloader is inserted, but it will not do anything else. windows dose not recognize it. please help i really dont want to send my phone out to a jtag service.
Follow the steps listed here http://www.sammobile.com/firmwares/download/31550/I535VRUDNE1_I535VZWDNE1_VZW/ and if this it is not the rom for your phone you can search it here http://www.sammobile.com/firmwares/
If it is bricked will never go into recovery , you will only be able to go in flash mode , the one listed in the step list. It is valid to all android phones , once the phone does not boot or gives random flashes on screen and etc and even won't turn off, you must press the buttons in the order to flash.