Hi !
I'm trying to go back to full stock and I just want to make sure I'm not making a mistake
According to this post :
http://forum.xda-developers.com/showthread.php?p=41977487
I can either download the MDK or the ME7 or the MI1
I have currently a custom ROM
http://forum.xda-developers.com/showthread.php?p=41977487
with the ME7 baseband (radio)
which one should I flash under ODIN ? (MDK, ME7 or MI1)
Thanks for your help !
LinkinParkmetre said:
Hi !
I'm trying to go back to full stock and I just want to make sure I'm not making a mistake
According to this post :
http://forum.xda-developers.com/showthread.php?p=41977487
I can either download the MDK or the ME7 or the MI1
I have currently a custom ROM
http://forum.xda-developers.com/showthread.php?p=41977487
with the ME7 baseband (radio)
which one should I flash under ODIN ? (MDK, ME7 or MI1)
Thanks for your help !
Click to expand...
Click to collapse
Your phone appears to have the MDK bootloader, so you should flash a MDK factory image. Don't ruin it by installing later releases.
Is someone has a odin package to flash?
I am using NA3 now. Kies shows no update and when i click firmware upgrade is says device's version cannot be updated.
@starmaster10 Do you have stock unmodificated NA3 firmware?
dsanke said:
@starmaster10 Do you have stock unmodificated NA3 firmware?
Click to expand...
Click to collapse
This rom ROOT_JDQ39.I527MVLUBNA3.tar by @krazykipa is the only really good working NA3 stock rom which is rooted already and is a roger's rom, but the rogers stuff can be removed if that is not your carrier as it is just a couple of items only i believe to remove, this rom should work for you, but if the phone has been update to the new kk NE5 rom then this rom most likely will not work for you...just unpack it first after download is complete and then use odin to flash it.
Below is a collection of all known stock firmware for the T-mobile S5 (G900T). This thread provides links to firmwares, root methods, bootloader, modem, and recovery methods. This isn’t a thread for support and any questions about any of the specific firmware, root methods, bootloader, modem, and recovery methods should be asked in the threads linked below. I am not responsible for what happens for any unfortunate problems that may occur while using any methods below. Please read any instructions carefully to avoid any mishaps!
-------------------------------------------------------------------
Links below are for Odin and MD5 if you need them.
(Use for 5.0+)>>Odin v3.10.6<< (Use for 5.0+)
Odin v3.09
MD5 reader
-------------------------------------------------------------------
Stock Firmwares: These are links directly to all the official stock firmwares for G900T. In other words, these are same files you would get if you downloaded straight from sammobile except you won’t get the ridiculous download times of sammobile. Remember to double check MD5 to make sure you get full download and not a partial download so everything will run as smooth as possible. Also some say the fix for an invalid error when flashing can be fixed by renaming file to end in .tar. (Example would be to change firmware.tar.md5 to firmware.tar and flash that)
Instructions straight from sammobile
1) extract/unzip firmware file (should show as .tar)
2) download odin v3.09 or newer and extract
3) open odin
4) Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
5) Connect phone and wait until you get a blue sign in Odin
6) Add the firmware file to AP / PDA
7) Make sure re-partition is NOT ticked and keep odin default settings
8) Click the start button, sit back and wait few minutes
G900TTMB1ANCH (4.4.2) [April 2014]
G900TUVU1ANE5 (4.4.2) [May 2014] (thanks @thisisapoorusernamechoice)
G900TUVU1ANE6 (4.4.2) [June 2014] (thanks @thisisapoorusernamechoice)
G900TUVU1BNF6 (4.4.2) [June 2014] (thanks @thisisapoorusernamechoice)
G900TUVU1BNG3 (4.4.2) [July 2014] (thanks @thisisapoorusernamechoice)
G900TUVU1BNG4 (4.4.2) [August 2014] (thanks @thisisapoorusernamechoice)
G900TUVU1BNH5 (4.4.2) [September 2014]
G900TUVU1CNK2 (4.4.2) [November 2014]
G900TUVD0B1 (5.0) [February 2015]
*Note: Don't use official 5.1.1 if you want to be able to downgrade firmware. Follow these instructions.*
G900TUVU1FOF6 (5.1.1) [June 2015]
G900TUVU1FOG6 (5.1.1 Stage-fright fix) [August 2015]
G900TUVS1FOJ4 (5.1.1) [November 2015] (thanks @thisisapoorusernamechoice)
G900TUVS1FOL1 (5.1.1) [December 2015] (thanks @thisisapoorusernamechoice)
G900TUVS1FOL1 6.0.1 [May 2016] (thanks @thisisapoorusernamechoice)
-------------------------------------------------------------------
Root Methods: These links take you to threads that have specific instructions on how to root a particular firmware. Read the instructions in those threads carefully and follow them as instructed for best results!
For NCH, NE5, NE6, and NF6 (thanks to @geohot) *Note: This method will NOT trip KNOX*
http://forum.xda-developers.com/tmobile-galaxy-s5/general/root-tripping-knox-t2873635
For NG3 or NG4 (thanks to @Chainfire) *Note: This method will trip KNOX*
http://forum.xda-developers.com/showthread.php?t=2713950
For NK2 or NH5 (thanks to @galaxyuser88) *Note: This method will NOT trip KNOX*
http://forum.xda-developers.com/tmobile-galaxy-s5/general/how-to-root-s5-firmware-knox-0x0-t2909352
For D0B1 (thanks to @TheSickness) *Note: This method will trip KNOX*
http://forum.xda-developers.com/tmo.../how-to-how-to-root-root-g900tuvd0b1-t3042249
D0B1 method #2*Note: This method will NOT trip KNOX but requires you to be rooted & use MobileOdin*
http://forum.xda-developers.com/tmo...ow-to-update-to-stock-rooted-ob1-5-0-t3049676
For FOF6 (thanks to @ShinySide) *Note: This method will trip KNOX*
http://forum.xda-developers.com/tmo...t/root-kernel-root-method-fof6-5-1-1-t3158005
For FOG6 (thanks to @ShinySide) *Note: This method will trip KNOX**
http://forum.xda-developers.com/tmobile-galaxy-s5/development/root-kernel-root-method-fog6-5-1-1-t3178077
-------------------------------------------------------------------
Bootloader+Modem: This link takes you to the thread that has the Bootloader+Modem for all the S5 varients. Please read instructions carefully from this thread and download only the files that are specifically for the G900T. Also take a look at this thread if you are going to flash OB1. If you are having errors flashing the BL or modem, please rename the file WITHOUT the .md5 at the end of file name and leave it with just the .tar which has worked for some members.
<Newest> OL1 Modem <December 2015>
OJ4 Modem
OG6 Bootloader
OG6 Modem
OF6 Bootloader
OF6 Modem
OB1 Bootloader
OB1 Modem
NK2 Bootloader
NK2 Modem
NG4 Bootloader
NG4 Modem
-------------------------------------------------------------------
Recovery methods: Links to guides to installing recovery methods. Please follow instructions carefully and make sure that the recovery methods are compatible.
Philz Touch
TWRP
CWM
xAjCx said:
-------------------------------------------------------------------
Bootloader+Modem: This link takes you to the thread that has the Bootloader+Modem for all the S5 varients. Please read instructions carefully and download only the files that are specifically for the G900T.
http://forum.xda-developers.com/showpost.php?p=52210611&postcount=4
-------------------------------------------------------------------
Click to expand...
Click to collapse
Great guide. Thanks!
Just a suggestion for when you have a ton of free time and absolutely nothing to do, you might want to actually add the modem and bootloader downloads in this thread. That would be a wonderful thing.
Thanks.
gspears said:
Great guide. Thanks!
Just a suggestion for when you have a ton of free time and absolutely nothing to do, you might want to actually add the modem and bootloader downloads in this thread. That would be a wonderful thing.
Thanks.
Click to expand...
Click to collapse
Didn't take long. Let me know if there are other BL or modems you specifically want. I actually have free time this weekend for the first time in awhile.
xAjCx said:
Didn't take long. Let me know if there are other BL or modems you specifically want. I actually have free time this weekend for the first time in awhile.
Click to expand...
Click to collapse
You're the Man! Thanks.
Awesome post! If this keeps gets updated regularly and stickied, this would save a lot of people or at least me lots of time searching for the important stuff! :highfive:
I successfully rooted my G900T using the G900P/Mobile ODIN method from here: how-to-update-to-stock-rooted-ob1-5-0
I apologize for not providing links but I'm below the 10 post threshold.
Mods, I'm just trying to contribute but understand if you need to edit this.
Hope this is enough, if you'd like more please let me know.
ODIN Screen
i.imgur .com/9mu0GlN.jpg
Root Checker
i.imgur .com/abBP0HG.png
Good stuff, Thanks
My phone has the G900TUVU1CNK2 firmware. I would like to root, flash TWRP and then flash a 5.0 ROM.
1. Can this be done without tripping KNOX?
2. Do I need to update the modem or bootloader?
IamaznX said:
My phone has the G900TUVU1CNK2 firmware. I would like to root, flash TWRP and then flash a 5.0 ROM.
1. Can this be done without tripping KNOX?
2. Do I need to update the modem or bootloader?
Click to expand...
Click to collapse
1. No. If you flash a custom recovery such as TWRP it trips Knox
2. It depends on the ROM, but when you move to 5.0 you should have 5.0 bootloader and modem, or you can have all kinds of problems if it even works at all. If you flash a stock 5.0 ROM it will update everything for you and then it is much easier to flash a custom ROM.
I'm going to flash an international ROM for my G900T. Do I need to flash the OB1 bootloader or modem first?
Help with restore from 5.0 vision x
Guy, i installed vision x 5.0 tmobile usa on my g900t and had too many issues.
Long story short I tried to nandroid back to nk2 but its not happy.
I didnt flash a new kernel or anything with the 5.0, why cant i nandroid back to nk2? or what am i doing wrong? should it not go right back to the image i had for nk2?
dovedescent7 said:
Guy, i installed vision x 5.0 tmobile usa on my g900t and had too many issues.
Long story short I tried to nandroid back to nk2 but its not happy.
I didnt flash a new kernel or anything with the 5.0, why cant i nandroid back to nk2? or what am i doing wrong? should it not go right back to the image i had for nk2?
Click to expand...
Click to collapse
From what I understand, you can only nand back to NK2 if you are on KK and not LP firmware. Someone correct me if I'm wrong
hi. Does the firmware for 5.0 contains boatloader and radio. Reason i ask cause i saw separate section for those. Thought firmware contains everything. Thanks
dungho said:
hi. Does the firmware for 5.0 contains boatloader and radio. Reason i ask cause i saw separate section for those. Thought firmware contains everything. Thanks
Click to expand...
Click to collapse
If you download the full firmware it does contain everything. The BL and modem you see for download is for those who want to exploit a root or some other reason. For the most part, you can just flash the full stock firmware and not have to worry about the rest unless you are trying to fix connection issues and/or root.
xAjCx said:
If you download the full firmware it does contain everything. The BL and modem you see for download is for those who want to exploit a root or some other reason. For the most part, you can just flash the full stock firmware and not have to worry about the rest unless you are trying to fix connection issues and/or root.
Click to expand...
Click to collapse
Thank you for the info. Appreciate it. Cheers
Hey guys,
Any where that just has the latest bootloader and modem for:
Device: Galaxy S5
Model: SM-G900T
Carrier: T-Mobile
Android: v5.1.1 Lollipop
PDA: G900TUVU1FOF6
CSC: G900TTMB1FOF6
Changelist: 90673209
Date: 22-06-2015
Szarko said:
Hey guys,
Any where that just has the latest bootloader and modem for:
Device: Galaxy S5
Model: SM-G900T
Carrier: T-Mobile
Android: v5.1.1 Lollipop
PDA: G900TUVU1FOF6
CSC: G900TTMB1FOF6
Changelist: 90673209
Date: 22-06-2015
Click to expand...
Click to collapse
Just updated! Enjoy!
xAjCx said:
Just updated! Enjoy!
Click to expand...
Click to collapse
Thank you so much!
Just one problem. I just downloaded the latest modem file twice, I keep keep MD5 hash value is invalid everytime I attempt to flash with Odin.
Any ideas?
Szarko said:
Thank you so much!
Just one problem. I just downloaded the latest modem file twice, I keep keep MD5 hash value is invalid everytime I attempt to flash with Odin.
Any ideas?
Click to expand...
Click to collapse
Not exactly sure why but searching around online, some say that changing the .md5 at the end of the file name helped them. But if that doesn't work I'm not sure. Hopefully a dev or someone sees this and knows what to do. If it does work though, let me know and I can put a note in.
xAjCx said:
Not exactly sure why but searching around online, some say that changing the .md5 at the end of the file name helped them. But if that doesn't work I'm not sure. Hopefully a dev or someone sees this and knows what to do. If it does work though, let me know and I can put a note in.
Click to expand...
Click to collapse
Are you saying you should rename the .md5 extension or.completely remove it from the file name. And just try flash as a .tar?
Does anyone have a download link to a I545VRUFNG6 build? I'm trying to reset my old GS4 to stock from Safestrap. I'm looking for a .tar file that I can flash via Odin.
I was running a 4.4.2 ROM prior.
fireattack7 said:
Does anyone have a download link to a I545VRUFNG6 build? I'm trying to reset my old GS4 to stock from Safestrap. I'm looking for a .tar file that I can flash via Odin.
I was running a 4.4.2 ROM prior.
Click to expand...
Click to collapse
This will get you to nc5: http://forum.xda-developers.com/showthread.php?t=2735172
I can confirm that albe95 S6 4.5 is workin like a charm on s4 i545.....
Can you link the rom you're using please?
If you can't post links pm it to me and I will post it for you
Thanks
You can find it in s4 i9505 android developpement.and be careful because you must have a rooted safestraped and lollipop on your s4
Did you have to modify the apn settings for it to work with Verizon?
No just flash oc1 stock kernel after you flashed the rom
anyone try it with flashfire?
would odining back to nc5, rooting, installing safestrap, and then flashing this rom and the requisite zips be a good install plan when coming from a OF1 rom (NK4 bootloader).
Brian
I ve flashed this rom on a oc1 rooted with nc5 bootloader.offcorse with safestrap
reliant_turbo said:
would odining back to nc5, rooting, installing safestrap, and then flashing this rom and the requisite zips be a good install plan when coming from a OF1 rom (NK4 bootloader).
Brian
Click to expand...
Click to collapse
That will work but you will need to flash the OC1 firmware also.
You can get the firmware only zip from here
So you would only flash firmware, rom, then OC1 kernel.zip.
Does everything seem to be pretty stable @metallover33 ?
I'm hoping to have time to try it sometime soon, just not sure when.
Thanks.
yeah I figured id have to flash that... thats partially what i meant by "requisite zips" as detailed out in this thread: http://forum.xda-developers.com/showpost.php?p=63027724&postcount=6375 though this guy did the gigilie safestrap method. im not sure if the wifi fix zip takes care of some of the firmware stuff.
now I'm curious if i could just wipe, then flash the firmware, the rom and then the kernel in flashfire.
id like to not have to do a full kitkat wipe.
any reason you say flash the firmware first before flashing the rom?
thanks
Brian
No reason.
The only thing with flashfire though is you need to open the rom.zip and remove the boot.img so you don't flash a kernel that isn't for our phone.
It's always good to know what's in the rom.zip before flashing anyways
hmmm. is that's all that's contained in the boot.img? I know enough to stay out of trouble..... most of the time.
Brian
The boot.img is the kernel... I haven't looked in it myself but I think that's all there is that needs removed.
I have a friend that can check for me though.
yeah if they could take a peek that would be much appreciated. id like to give this a go in flashfire.
thanks
Brian
Open the zip with 7zip and delete boot.img.
Then go into the meta folder all the way in is the updater-script.
You need to replace it the one in the link.
https://www.dropbox.com/s/h3ymkighoznqq49/updater-script?dl=0
Then it should work with flashfire.
Not 100% sure but should.
Let us know how it goes.
Make sure to flash all 3 zips.
Also make sure you know how to recover using Odin.
ok. deleted boot.img and deleted updater-script and copied in the replacement.
yeah i have my nc5 full wipe recovery tar and pit file
I hope someone can make a custom oc1 based kernel .it would be great
Can only be done for mdk users.
Ss and ff users cannot have custom kernels even if it's based on stock.
ok here goes........ flashing now.
---------- Post added at 11:04 PM ---------- Previous post was at 10:42 PM ----------
it booted. wifi doesnt work. ill have to install flashfire from the sd and flash the wifi fix.
i also dont see a 4g icon but i have bars...... but im not online.
I'm working on making a modified version with our apn config and wifi modules.
Flash oc1 wifi modules. I have them in my afh account just search my username.