i just got a new laptop and when i connected my x10....the device driver was not installed! tried the drivers in the flashtool drivers folder! can anyone give a solution for it? flashtool cant detect my phone! plz help! thanks!
neerajk said:
i just got a new laptop and when i connected my x10....the device driver was not installed! tried the drivers in the flashtool drivers folder! can anyone give a solution for it? flashtool cant detect my phone! plz help! thanks!
Click to expand...
Click to collapse
Try these drivers bro.
http://dl.dropbox.com/u/19309495/x10_2.3.3_adb_drviers.zip
or read through some of these threads...
http://forum.xda-developers.com/search.php?searchid=93383202
I normally just install SEUS/PC Companion and that installs all necessary drivers for me. I then check to see if they're installed by the 'check drivers' option in the help menu.
---------- Post added at 06:44 AM ---------- Previous post was at 06:39 AM ----------
And by 'help menu' I meant flashtool's help menu.
My Device Xperia U (ICS), PC: Windows 8 Pro 64bit,
My phone is not staying in fastboot mode as needed to unlock bootloader.
I have searched XDA throughout, tried every thing but didnt work.
I tried manually installing drivers, but got error.
Tried installing fastboot drivers through flashtools but it also gives an error saying drivers not installed.
what should i do now?
When i connect my device to pc while holding volume up button, the blue light in LED bar glows just for 3-4 seconds and then disconnects.
Kindly hoping someone to help me out of this.
:fingers-crossed:
Problem solved!!!! See the reply posts
Try trouble shooting compatibility
Sent from my ST25i using Tapatalk 2
---------- Post added at 01:06 PM ---------- Previous post was at 01:06 PM ----------
Or run it in virtual machine
Sent from my ST25i using Tapatalk 2
Rajul said:
Try trouble shooting compatibility
Sent from my ST25i using Tapatalk 2
---------- Post added at 01:06 PM ---------- Previous post was at 01:06 PM ----------
Or run it in virtual machine
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
tried doing that but didnt work
Utkarsh-ezzo said:
My Device Xperia U (ICS), PC: Windows 8 Pro 64bit,
My phone is not staying in fastboot mode as needed to unlock bootloader.
I have searched XDA throughout, tried every thing but didnt work.
I tried manually installing drivers, but got error.
Tried installing fastboot drivers through flashtools but it also gives an error saying drivers not installed.
what should i do now?
When i connect my device to pc while holding volume up button, the blue light in LED bar glows just for 3-4 seconds and then disconnects.
Kindly hoping someone to help me out of this.
:fingers-crossed:
Problem solved!!!! See the reply posts
Click to expand...
Click to collapse
Successfully installed Fastboot driver on windows 8 (Used Advance Startup for installing unsigned drivers)through Flashtools and also unlocked bootloader..
Accidently lost all data as unlocking bootloader wipes data...forgot to take a backup but m happy.
i was trying to root my phone so i flash my device with TWRP recovery using Rashr app.
after rebooting my phone storage need format. i rebooted my phone without formatting and then it stuck on boot logo .
then i used SP flash tools for flashing stock recovery but it gave an error and stops and after that my device is not responding to any key combination but my laptop is detecting device when i insert it .
Please help.
Xolo 8X-1000 [battery non removable]
MTK6592M
Need some details
1.What is your phone model?
2.Which chipset your phone have?
3.I guess you have scatter file but how did you get that? from stock rom?
Phone model?
If it detects Preloader of device you are good to go
If not you need full backup of stock rom and install drivers
aravazhi_mdr said:
1.What is your phone model?
2.Which chipset your phone have?
3.I guess you have scatter file but how did you get that? from stock rom?
Click to expand...
Click to collapse
XOLO 8X-1000
MediaTek MTK6592M
and i downloaded stock ROM from androidmtk .com
thank you for your help
Scot can u run device manager and take a screenshot of Com ports when u connect ur device?
arshad145 said:
Scot can u run device manager and take a screenshot of Com ports when u connect ur device?
Click to expand...
Click to collapse
device is detectable by laptop as Mediatek DA USB VCOM port in device manager.
bad ...
It must be detected as preloader mt65xx
Don't panic
1.Disconnect phone take battery out or switch it off
2.Connect device to pc via usb without battery
Post result...
arshad145 said:
bad ...
It must be detected as preloader mt65xx
Don't panick
1.Disconnect phone take battery out or switch it off
2.Connect device to pc via usb without battery
Post result...
Click to expand...
Click to collapse
battery is non removable
switch off phone then...
Disconnect usb then reconnect with phone off
Result?
---------- Post added at 01:07 ---------- Previous post was at 01:06 ----------
And btw wat version of windows running? 7,8,10?
My computer cannot recognize my i8552 device in fastboot mode(download mode). I have install several times samsung usb driver but still the same. But I want to flash twrp, any ideas? driver error code 10
Jason_20 said:
My computer cannot recognize my i8552 device in fastboot mode(download mode). I have install several times samsung usb driver but still the same. But I want to flash twrp, any ideas? driver error code 10
Click to expand...
Click to collapse
root ur device with kingroot
use rasher app with flash recovery.img via phone storage
if fail then
unlock developer option by tap 10 times on build number in about device
turn on usb debugging in developer option
use pda.net for pc or minimal adb pc
for force install driver on pc
rony raj said:
root ur device with kingroot
use rasher app with flash recovery.img via phone storage
if fail then
unlock developer option by tap 10 times on build number in about device
turn on usb debugging in developer option
use pda.net for pc or minimal adb pc
for force install driver on pc
Click to expand...
Click to collapse
I am also facing the same problem. I waana install Stock again. I tried Minimal ABD, it connects when phone it is ON, but in download mode it says no device connected....
nfs2014 said:
I am also facing the same problem. I waana install Stock again. I tried Minimal ABD, it connects when phone it is ON, but in download mode it says no device connected....
Click to expand...
Click to collapse
minimal adb not detect device in download mode
only odin with samsung driver and samsung kies auto
run both to connect in odin in download mode
I fixed the problem. If you want to know the solution, you can P. M. me.
Jason_20 said:
I fixed the problem. If you want to know the solution, you can P. M. me.
Click to expand...
Click to collapse
how didi u fix this issue
---------- Post added at 11:44 PM ---------- Previous post was at 11:43 PM ----------
how didi u solved it??
vaisakmct said:
how didi u fix this issue
---------- Post added at 11:44 PM ---------- Previous post was at 11:43 PM ----------
how didi u solved it??
Click to expand...
Click to collapse
I just use a proper way to enter fastboot mode instead of using shortcut way (by command).
Does somebody have any information or encounter about this? The device is a Blu Energy X Plus 2, a back up phone I wanted to experiment with.
-After unlocking bootloader using ADB, phone got stuck at boot logo.
-I forgot to wipe.
-Device is not yet rooted
-After waiting for minutes I have forced the phone to shut down.
-Volume+Power combo, battery is non removable
-Now it wont turn on and respond to any button.
-It charges, as proven by the red light.
-It is somehow detected by the PC using the VCOM drivers. PC makes a sound and MT65xx PreLoader VCOM appears in the Device Manager.
-SP Flash Tool will not start download. Even tried download before plugging in usb, nothing happens.
-Tried many different flash tools versions. 1628, v5, v3, Nothing works. No error message but an error appears when I plug out the USB cord
-BROM Error: S_BROM_CMD_STARTCMD_FAIL(0x7D5)
Cannot pass bootroom start command! Possibly target power up too early.
Hi , maybe your SP Flash tool is not compatible for your chip , so try this one :
https://spflashtool.com/download/SP_Flash_Tool_v5.1628_Win.zip
Search firmware exactly for your device model .
You can use IDM -Internet Dowwnload Manager for fast downloading...
Teddy Lo said:
Hi , maybe your SP Flash tool is not compatible for your chip , so try this one :
https://spflashtool.com/download/SP_Flash_Tool_v5.1628_Win.zip
Search firmware exactly for your device model .
You can use IDM -Internet Dowwnload Manager for fast downloading...
Click to expand...
Click to collapse
I have already tried the 5.1628 version, it is also not working.
The latest version has a bug I think which causes it to have a RUntime error when picking a scatter file.
The old v3 will not accept any scatter file anymore.
Also I have downloaded two versions of stock rom already. First one is 800 mb and the second one is 2GB. Both do not work, but I suspect the first one to completely fail since it had an unmatching scatter file within.
Try this.Hold power button for 2 min if your phone boots up Good News It's usable.If not then It's only crap now.Mediatek devices are not supposed to be rooted and if somehow you managed to do that they will make sure you pay for it.
Sent from my Pixel 3 XL using Tapatalk
Atifbaig786 said:
Try this.Hold power button for 2 min if your phone boots up Good News It's usable.If not then It's only crap now.Mediatek devices are not supposed to be rooted and if somehow you managed to do that they will make sure you pay for it.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I tried it but the device doesnt seem to respond to any button whatsoever. The device is not rooted though, I wanted to flash magisk but it all happened after unlocking the bootloader. But I have hope since the preloader is indeed detected in the PC.
Try to relock bootloader with adb if your device is recognised by ADB ...
Teddy Lo said:
Try to relock bootloader with adb if your device is recognised by ADB ...
Click to expand...
Click to collapse
device is no longer recognized by adb, it wont turn on anymore. Only as MT65xx preloader as it shows in the device manager
helpplease123 said:
device is no longer recognized by adb, it wont turn on anymore. Only as MT65xx preloader as it shows in the device manager
Click to expand...
Click to collapse
Follow this thread maybe is driver issue so read carefully ...
https://forum.xda-developers.com/showthread.php?t=2180436
Good luck
What's up with VCOM?
Well I don't think your PC would be able to detect your device because you haven't got the VCOM drivers yet. Get any VCOM driver for Mediatek, and then disable driver signature enforcing on Windows. Now fire up SPFT and select the scatter use v5.1628 as the newer ones seem to be unstable (also verified by OP). Now choose the Preloader for your device and then enter download mode. Turn off the phone (if you can't, just let it die until the battery is over). And then connect it using an USB cable, while SPFT is in download mode. You should be able to unbrick your device.
And as you said S_BROM_CMD_STARTCMD_FAIL(0x7D5), that is when the device powers up too early before the flash could begin. The 8 byte token is not received by the preloader and hence it ain't working. This is why you have to switch your phone off completely, and also try using a different USB cable
Note:
The preloader parition has an emergency download mode which is used to enable the download to take place. Now, if you flash the wrong preloader, then your device won't even be detected in SPFT or anywhere else. So yeah, in MTK preloader is the life of your phone. Please verify that you are flashing the correct preloader
BusinessKid said:
Well I don't think your PC would be able to detect your device because you haven't got the VCOM drivers yet. Get any VCOM driver for Mediatek, and then disable driver signature enforcing on Windows. Now fire up SPFT and select the scatter use v5.1628 as the newer ones seem to be unstable (also verified by OP). Now choose the Preloader for your device and then enter download mode. Turn off the phone (if you can't, just let it die until the battery is over). And then connect it using an USB cable, while SPFT is in download mode. You should be able to unbrick your device.
And as you said S_BROM_CMD_STARTCMD_FAIL(0x7D5), that is when the device powers up too early before the flash could begin. The 8 byte token is not received by the preloader and hence it ain't working. This is why you have to switch your phone off completely, and also try using a different USB cable
Note:
The preloader parition has an emergency download mode which is used to enable the download to take place. Now, if you flash the wrong preloader, then your device won't even be detected in SPFT or anywhere else. So yeah, in MTK preloader is the life of your phone. Please verify that you are flashing the correct preloader
Click to expand...
Click to collapse
Tried everything here, and I even used a windows 7 pc but it is still not working. The VCOM was already installed, in fact when I plug in the phone windows automatically detects it as the MTK Preloader VCOM USB port(COM13) in the device manager. The VCOM driver that is supposed to be installed leaves an error in the device manager (COM12). SP Flash tool still will not start flashing. No error messages, until I plug out the usb cord.
helpplease123 said:
Tried everything here, and I even used a windows 7 pc but it is still not working. The VCOM was already installed, in fact when I plug in the phone windows automatically detects it as the MTK Preloader VCOM USB port(COM13) in the device manager. The VCOM driver that is supposed to be installed leaves an error in the device manager (COM12). SP Flash tool still will not start flashing. No error messages, until I plug out the usb cord.
Click to expand...
Click to collapse
You do see that exclamation right - this means it isn't properly configured
---------- Post added at 01:37 PM ---------- Previous post was at 01:35 PM ----------
helpplease123 said:
Tried everything here, and I even used a windows 7 pc but it is still not working. The VCOM was already installed, in fact when I plug in the phone windows automatically detects it as the MTK Preloader VCOM USB port(COM13) in the device manager. The VCOM driver that is supposed to be installed leaves an error in the device manager (COM12). SP Flash tool still will not start flashing. No error messages, until I plug out the usb cord.
Click to expand...
Click to collapse
Looks like it's more of a Windows issue than your phone. If your preloader's good - you're safe. I think it's a COM bridge issue. Just stay on the wait and I'll get back to you in a minute or two
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
I'm working on a batch script for you to fix the COM issue. Would you mind sharing your Windows Version and Architecture?
I'm building it for Windows 7 x64 - if that's your PC?
BusinessKid said:
You do see that exclamation right - this means it isn't properly configured
Click to expand...
Click to collapse
---------- Post added at 01:37 PM ---------- Previous post was at 01:35 PM ----------
I mean the COM13 is fairly OK for the part, its the VCOM that comes from installing the phone. However the COM12 that came from the manual installer had the exclamation point.
Looks like it's more of a Windows issue than your phone. If your preloader's good - you're safe. I think it's a COM bridge issue. Just stay on the wait and I'll get back to you in a minute or two
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
Click to expand...
Click to collapse
Its already a great thanks from me for you to even post more than once. thank you so much!
[/COLOR]I'm working on a batch script for you to fix the COM issue. Would you mind sharing your Windows Version and Architecture?
I'm building it for Windows 7 x64 - if that's your PC?
Click to expand...
Click to collapse
Yes, in fact I have first tried it in Windows 10 x64 before switching back to this W7 x64 laptop. Same problem same outcome though
So let us go 101
Okay - the first thing that we'd do now is blow off those crappy drivers - uninstall them! Now get on your Windows 10 x64 PC. Install the VCOM drivers from this XDA thread. It's for elephone, however I've used it myself and it works really well on almost any device. Now power off your phone completely (no bootlooop, completely dark screen). Launch SPFT, select scatter, select the correct preloader and then hit on download. Do not connect your phone now! Now wait for 10 seconds. Now connect your phone. And let the download begin. If it works - fantastic, if it doesn't ping me back and I'll be waiting for replying to you. The batch script is almost done (I was doing some kernel work), I'll upload it once I'll be back home (on the way back now).
Fingers crossed :fingers-crossed:
BusinessKid said:
Okay - the first thing that we'd do now is blow off those crappy drivers - uninstall them! Now get on your Windows 10 x64 PC. Install the VCOM drivers from this XDA thread. It's for elephone, however I've used it myself and it works really well on almost any device. Now power off your phone completely (no bootlooop, completely dark screen). Launch SPFT, select scatter, select the correct preloader and then hit on download. Do not connect your phone now! Now wait for 10 seconds. Now connect your phone. And let the download begin. If it works - fantastic, if it doesn't ping me back and I'll be waiting for replying to you. The batch script is almost done (I was doing some kernel work), I'll upload it once I'll be back home (on the way back now).
Fingers crossed :fingers-crossed:
Click to expand...
Click to collapse
Dude holy ****, I cannot believe that it worked! I swear I was very confident that the problem was not in the drivers, but out of luck I started to follow that guide again from start to finish and selected the "MTK USB Port" in the device manager section. Then I plugged in and SP flash tool finally started! You rock!
Your welcome! I'm glad that worked!