Related
I buy it just today and i need some help to upgrade it to android 4.2.2 if possible.
Abedo3 said:
I buy it just today and i need some help to upgrade it to android 4.2.2 if possible.
Click to expand...
Click to collapse
I bought it more or less at 4th august...and now I just root it...from here:
http://www.tinhte.vn/threads/hisense-f1-hisense-hs-u950-chia-se-va-cam-nhan.2091737/
It is in vietnam language...with the google translator it is at less a little understable for me...it works...I made it.
The steps are:
Download and uncompress the file.
Connect smartphone.
Debugg usb on and usb mass storage.
Click on adb and fastboot files. Click on E.(strange words)Recovery.
Click on 3 at pc.
Wait a moment.
Unplugg the phone and turn off.
Reboot into fastboot mode (Vol up + Power)
Plugg the phone again and press Intro at Pc.
Wait a moment.
Turn off and reboot into recovery mode (Vol down + Power)
Go to Telley Rom in phone and flash it (the recovery is in chinesse caracteres)
Flash Superuser and Bussybox.
Reboot and thats it...Recovery and Root
Ok...I know...It looks very difficult but works...my phone now is rooted and has a chinesse recovery....now must wait for roms....
HS-U950 Hisense recovery mode broken
Salut ! Hello !
I also have a Hisense HS-U950 and I need help to fix my broken Recovery Mode with ADB Fastboot.
I broke through March after trying to root without any information.
I sent it to someone to China for repair, but when I received I saw Recovery Mode doesn't work:
VOLUME UP + POWER = WELCOME TO fastboot;
VOLUME DOWN + POWER = a picture of Android and a red triangle warning
VOLUME UP + VOLUME DOWN + POWER = "Failed to read file / u950.v1/CONF/u950.xml, with error -1 no."
Now my phone is root-ed with Framaroot/Gandalf, i make a backup with Online Nandroid Backup (.android_secure.vfat.tar, cache.ext4.tar, data.ext4.tar, nandroid.md5, recovery.log, system.ext4.tar), and ROM Toolbox Lite installed.
I want to install GAPPS and for this i need Recovery Mode.
I need help ! Thanks !
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Hi,
any ideas? I need your help...
I also have such a problem with my PMP5580C DUO.
It just hangs on the Bootscreen with the "The Art Hi-Tech" and the logo.
No chance to get into cwm with power+vol up and even the Hardresetbutton just switches the tablet off.
Can someone help? Or did you find a solution yet?
Thank you very much
W3hrWolf said:
Hi all,
i got an bootloop at my Presitigo PMP5580C (same as Intenso TAB 814). The recovery mode (Power + vol+) wont work.
How to flash the firmware to the tablet?
I installed Android SDK and the Drivers. But what to do now? What Software did i have to use to flash und what file (Firmware) to flash?
Please help me...
Regards
Click to expand...
Click to collapse
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
http://www.prestigio.com/catalogue/Archive_products/Multipads/MultiPad_8.0_Pro_Duo#/product-support/firmware
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
pmp5580c bootloop
Zacktamondo said:
Have you tried to put the update.zip file and recovery image on an SD card ?
If not do that then press (Volume +) + (Power) buttons then when the screen flashes stop pressing the (Power) button and keep pressing the (Volume +) button after some time it will start flashing the Tab.
Here is the link if you don't have the update.zip file :
use the 2.0.24 version.
Hope this helps
If not tell me so I can give you another way by using CWM.
Waiting for your reply...
Click to expand...
Click to collapse
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
AzahTabor said:
Hi, my friend has the PMP5580c and it too will not go to recovery at all. it just hangs in a boot loop on the start up screen. I have tried the recovery combination, but it does not work. how would I go about flashing the firmware/update.zip file using CWM.
Click to expand...
Click to collapse
Do you have a CWM flashed already or not?
If so then I had this problem before you just need to put the update.zip on the root of the SD card then press the recovery buttons for some time like 2 minutes -some times it takes so long but it works- .
reply to me soon.
Bootloop fixed
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
AzahTabor said:
Hi Zack.
I was able to get it sorted with fastboot. Needed the laptop to register the m3-chip that it was saying was the tablet. Once that was done, flashed it with the original stock firmware. It now runs like it was brand new.
Thank you all for your time on this matter
Click to expand...
Click to collapse
hi, i have the same fault on the same tablet, how do i fastboot? also when connected to pc it is saying it is a world cup device? thanks in advance
Bricked PMP5580C
Hello
I have bricked my Intenso Tab 814 (same as Prestigio PMP5580C). I formated the bootloader space + the recovery space, and now I can't even turn it on. The backlight of the display isn't glowing up at least. So I used my MicroUSB cable and connected to the computer, it is recognized by the computer, but I can't flash anything back with the amlogic software which I've got, I am really appreciating when someone of you can try to help me out,
thanks in advance,
AMLOGIC
Unbricked Intenso Tab 814
I have successfully unbricked an Intenso Tablet 814 also know as Prestigio PMP5580C! It had no bootloader and all partitions were formatted! This includes the bootloader, means it even showed backlight as I plugged it into the power supply. I got a rescue sd card made with Christian Troys tutorial but my tabket was nit abke to start, because the nand chip was corrupted, so I looked at the nand chip and used a scrwwdriver and put it on the 6 and 5 th point t the right side on the left side is the hole on the nand chip, after that I was able to permitt the access for the nand chip to the mainboard, so it booted from the sd card automaticaly,
Intenso Tab 814 can be unbricked! Yeah, now I need it's source to customize the recovery and boot splash + oneday the os,
Take care!
Bye bye!
Stuck in bootloop intenso tab 724
So the title says it all how can I fix it? No custom recovery only root
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
Hello, i've been trying to find anything related to this tablet, a Hipstreet Equinox 10.1 HS-10 DTB1-4GB, from what i can tell its supposed to be based on android 2.3 gingerbread.
The tablet basically trefuses to boot up and i've been trying to find a way to get into recovery to do a factory reset or a firmware to force flash to factory reset but i have been unable to find out how to do either, or even any information/firmwares for this tablet. if anyone can help me it would be greatly apreciated.
dragonfly14 said:
Hello, i've been trying to find anything related to this tablet, a Hipstreet Equinox 10.1 HS-10 DTB1-4GB, from what i can tell its supposed to be based on android 2.3 gingerbread.
The tablet basically trefuses to boot up and i've been trying to find a way to get into recovery to do a factory reset or a firmware to force flash to factory reset but i have been unable to find out how to do either, or even any information/firmwares for this tablet. if anyone can help me it would be greatly apreciated.
Click to expand...
Click to collapse
Your tablet may not have CWM or TWRP recoveries..Some combinations you can try are:
When tablet is booting up press VOLUP or VOLDOWN or both.
When tablet is booting up press VOLUM + Power or VOLDOWN + Power or both.
UltraWelfare said:
Your tablet may not have CWM or TWRP recoveries..Some combinations you can try are:
When tablet is booting up press VOLUP or VOLDOWN or both.
When tablet is booting up press VOLUM + Power or VOLDOWN + Power or both.
Click to expand...
Click to collapse
its most definitely on stock recovery for GB 2.3, but i have not managed to get into it. i have Vol + vol - Menu, home and back buttons, so far i've tried volume +/- both + power and ive tried menu + power as well as back and the home individually. i have not managed to get anything different other than on home + power, when i do that, i ttakes 5x longer on the "hipstreet splash logo" once it gets past that though it says android then infiniblackscreen. - i dont get anything on a host computer via the USB either when trying any of these combos - hoping to get ADB to do a factory reset via ADB.
i used to have a ployer momo 9 and i remember that tablet had a special recovery mode with a special flasher and was wondering if something like that existed for this cheap tablet which is based on just about the same thing, allwinner dual core 1.0 ghz + 512mb ram + 4 gb rom.
dragonfly14 said:
its most definitely on stock recovery for GB 2.3, but i have not managed to get into it. i have Vol + vol - Menu, home and back buttons, so far i've tried volume +/- both + power and ive tried menu + power as well as back and the home individually. i have not managed to get anything different other than on home + power, when i do that, i ttakes 5x longer on the "hipstreet splash logo" once it gets past that though it says android then infiniblackscreen. - i dont get anything on a host computer via the USB either when trying any of these combos - hoping to get ADB to do a factory reset via ADB.
i used to have a ployer momo 9 and i remember that tablet had a special recovery mode with a special flasher and was wondering if something like that existed for this cheap tablet which is based on just about the same thing, allwinner dual core 1.0 ghz + 512mb ram + 4 gb rom.
Click to expand...
Click to collapse
Using ADB is a good idea .I didn't think of that though :silly:...
UltraWelfare said:
Using ADB is a good idea .I didn't think of that though :silly:...
Click to expand...
Click to collapse
thanks, but yeah, i cant get anything out of it so far and was hoping someone had the magical way to revive it :/ i believe on my ployer it was something ridiculous like vol - + home + back + power for 5 seconds and i had to get it flashing within 5 seconds of that or it would switch modes.... x_x
dragonfly14 said:
thanks, but yeah, i cant get anything out of it so far and was hoping someone had the magical way to revive it :/ i believe on my ployer it was something ridiculous like vol - + home + back + power for 5 seconds and i had to get it flashing within 5 seconds of that or it would switch modes.... x_x
Click to expand...
Click to collapse
Wait I found something for you
There is a few tricks to get your Tablet back , You require a few things
-A usb cable to connect to computer
-Internet connectivity
Now Lets start by putting the tablet in Android recover mode .
1. Connect the tablet to the USB port on the Computer .
2. Press and hold the power button and the Big button on the tablet , Keep pressing it until the logo of the android gut with his gut open shows up .
3. It is possible to perform a reset using the ADB (Android Debug Bridge)
I did mine on Windows XP , (Does your tablet install correctly in the Device manager? )
If so That is great news , You may goto step 5
If not Goto step 4 :
Step 4: Getting the Chinese driver equivalent for your tablet .
Get the drivers for the Ainol 7" Auror tablet (or equivalent )
Now Before the driver will work with your device (you can try to install it but it will give you an INF error)
You must edit the file (.INF) to match your USB id of the tablet
(At the bottom of the file change the STRINGS section to the device codes of your tablet ) (found by right clicking the Unknown device in the device manager . the (VID_1f3a_PID_efe8) is the HARDWARE ID and the
[Strings]
USBDRV="USB Devices"
USB\VID_1f3a&PID_efe8.DeviceDesc="USBDevice(VID_1f3a_PID_efe8)"
YOUR STRINGS:
USBDRV="USB Devices"
USB\<YOURDEVICEID>.DeviceDesc=USBDevice(<YOURDEVICEID>)"
Step 5:
Get the Recovery tool from here
https://spideroak.com/share/KNQW243.../CWM_Recovery_Manta_MID08_windows_install.zip
This will give you a suite of tools to restore your device to factory reset
Use it to install the recovery partition , and then reboot your device in recovery mode , Then use the Vol + and - buttons to navigate and power button to Enter .
(Source : click here)
Hello there, i have a Hipstreet too, but my android have crashed and dont turn on anymore.
I cant find the stock rom or custom rom anywhere.
Can you find some of these?
If you dont, you can make a backup and send a link to me?
Thanks and sorry for the english.
Hi folks,
I Soft bricked my hp 8 g2 1411.
I was trying to install a recovery rom so I could install a lollipop rom.
I'm now stuck at the HP powered by Android screen. See attached.
I can't get to the recovery screen as its probably gone.
I also have the complete original ROM downloaded from HP with a folder with recovery on it...
I don't know how to get to fast mode or download mode.
Can anyone help?
Thanks,
Steve.
I Hope This Could Be Of Any Help
We have exactly the same device and I had exactly the same problem for like 2 weeks and I was able to fix it fortunately. So I would like to help you if in case you still needed one. I created a tinyurl of the website you got to download the stock firmware from and not the one from HP website. Then save it on the root folder of your external sd card with update.zip as the file name. Now with your tablet off simultaneously press power + volume up + volume down and once you see the HP logo release them all and you'll once again see HP logo and then the stock recovery of your tablet. Use the volume keys to navigate to "apply update via sd card" then choose the "update.zip" you downloaded. It's gonna install for about 3-5 minutes and you're good to go.
I'll pm you the link for I am not allowed to write one yet!
Cheers!
Nicole:victory:
I have the same device and the same problem. However when I push the power+ volume up + volume down buttons at the same time and release when I see the HP logo, all I aver get is then HP logo Powered by Android. It never gets to the recovery screen.
Thanks Ted
Please share the link. Recently my tablet bootloop for no reason.
I had the same problem with mine and found no solution to fix it other than flash the firmware .img with a micro sdcard created with phoenix card. Sadly the firmware .img is not available from HP ...
Now 3 weeks later I compiled a custom firmware for the HP 8 G2 1411 and got everything working in Android and most of it working in TWRP (custom recovery environment)! I am in the final stage of tweaking TWRP and I should be done with it in the next days.
The release will contain:
Custom Android KitKat 4.4.2 for HP 8 G2 1411
(without HP bloatware)
Google Now default launcher
Custom recovery TWRP 2.7.01
Possible to flash superSu .zip to gain root
Flashable sdcard (need to be burn with PhoenixCard)
I can't post link in the forum right now, send me a PM if you need it!
This will fix a softbricked tablet but you will loose all your data.
It' done! How to fix a softbrick on the HP 8 G2 1411:
-Download and install PhoenixCard 3.1.0
http://www.mediafire.com/file/rlccciim76vsqnv/PhoenixCard_V3.1.0.rar
Download my custom ROM from:
https://mega.nz/#!YvRlXY5S!6Sg8r-DzMoV5Y1FUP1loCN7PbN7dwbOoPSMQXglcljI
-Prepare a micro-sd card with PhoenixCard
-Turn off tablet
-Remove top cover (where the usb port is) and put sdcard in
-Turn on tablet (be sure you have enough battery, the process takes around 3min)
-Wait until the green bar is filled, it should say Card OK on top when it's done and the tablet will turn off
-Remove sdcard (put back the compartment cover if you want)
-Turn the tablet back on again
-wait.... and...
-That's it, it should boot into Android KitKat!
If you want to boot to Recovery use adb (check google for instruction on how to install) or use a "custom power menu app"
*Don't boot to fastboot or to bootloader, this is not supported by this tablet, it will softbrick the tablet and you will have to start the process again
Features:
-Custom Android KitKat 4.4.2 for HP 8 G2 1411
(without HP bloatware)
With Google Now default launcher
-Custom recovery TWRP 2.7.01
(Possible to flash superSu.zip from recovery to gain root)
*Install from sdcard (need to be burn with PhoenixCard)
Known issues:
TWRP can't mount data partition or external sdcard
Volume button wont work during boot (they work fine once Android is loaded)
Once in a while the might wifi stop working, a reboot will fix it (very rare)
Enjoy!
I still using this tablet. I using ur rom as well. It's good. But I just realise it doesn't come with swap ram.
nicolepulga said:
We have exactly the same device and I had exactly the same problem for like 2 weeks and I was able to fix it fortunately. So I would like to help you if in case you still needed one. I created a tinyurl of the website you got to download the stock firmware from and not the one from HP website. Then save it on the root folder of your external sd card with update.zip as the file name. Now with your tablet off simultaneously press power + volume up + volume down and once you see the HP logo release them all and you'll once again see HP logo and then the stock recovery of your tablet. Use the volume keys to navigate to "apply update via sd card" then choose the "update.zip" you downloaded. It's gonna install for about 3-5 minutes and you're good to go.
I'll pm you the link for I am not allowed to write one yet!
Cheers!
Nicole:victory:
Click to expand...
Click to collapse
Hi, may i know the link you the device?
imranclick said:
I still using this tablet. I using ur rom as well. It's good. But I just realise it doesn't come with swap ram.
Click to expand...
Click to collapse
I did what I was able to do with my limited knowledge, at least I was able to salvage the device! I'm far from being a programmer and I think it's sad that no one tried to port a custom ROM for this device...