Hi Friends
I was in charge phone
After 20 minutes I could not charging
And when he was off again did not Charge
But with a little dock charged
But when it became clear I wrote you that wipes recovery system unmunt after I reboot
And the Sony logo on the left
Instead, he was still charging connector Repair
You flash mode lamp Green was a moment but off the field
Fast-boot mode after you turn the blue lights but not recognized by the computer
It's now clear the field, but the Sony logo
Teachers Review Body
I cannot understand what are you saying. Are you in a bootloop.
Hariskh said:
I cannot understand what are you saying. Are you in a bootloop.
Click to expand...
Click to collapse
no,my phone stuck in Sony splashscreen and not going to the flash mod , so just going into the fast boot mod but not recognize by computer
samad_asheq said:
no,my phone stuck in Sony splashscreen and not going to the flash mod , so just going into the fast boot mod but not recognize by computer
Click to expand...
Click to collapse
>> restart your PC
>> if it still happens
>>you need to install driver for your phone, which is located in C: /flashtool
>>after installation you may reboot your PC
>>now first unplug the cable ..
>>Press power and volume + key until your phone vibrates 3 times
>>now first plug your phone to the cable and then only on PC when flashtool prompts holding the volume down key..
---------- Post added at 06:52 PM ---------- Previous post was at 06:45 PM ----------
you need to install drivers located in C:/ flashtool folder
>> reboot
>>switch your phone off
>>plug in the cable in your phone first and when flashtool prompts to connect your phone;
connect it holding the volume down key
you will be in flashmod
problem as motherbord
Related
The thing is my Xperia Go is stuck at bootloop and i cant access anything.. no CWM, no entering fastboot and computer doesnt seem to recognize it at all. It only goes up to SONY logo, stays there a while and then blanks the screen just to do it all over again.
It started when i flashed my phone with new kernel.
Any ideas of what should i do now?
All help will be appreciated im new to this.
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Min3r said:
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Click to expand...
Click to collapse
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
This seems like a hardbrick although flashing a custom kernel shouldnt have caused that issue.. Did you do the cable connecting in the exact order I said ? You might have missed that ,with any luck
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
vikativehkleja said:
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
Click to expand...
Click to collapse
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
drsanket_xperia_u said:
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
Click to expand...
Click to collapse
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
vikativehkleja said:
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
Click to expand...
Click to collapse
Anytime buddy
Hi all this is my first post here.
I flashed the CM10.2 by munjeni but i forgot to format /system
Now my Sola doesn't even start, when i try starting it vibrates and nothing happens
If i charge it and try to start it vibrates, the red led lights for a second and then.. nothing
My PC doesn't recognize it and if i try to fastboot or flash the purple/green led lights fot three seconds and then turns off and flashtool doesn't see the device
PLEASE HELP!!!!!!
ametyst said:
Hi all this is my first post here.
I flashed the CM10.2 by munjeni but i forgot to format /system
Now my Sola doesn't even start, when i try starting it vibrates and nothing happens
If i charge it and try to start it vibrates, the red led lights for a second and then.. nothing
My PC doesn't recognize it and if i try to fastboot or flash the purple/green led lights fot three seconds and then turns off and flashtool doesn't see the device
PLEASE HELP!!!!!!
Click to expand...
Click to collapse
Is your bootloader unlocked?
Make sure it's turned off by pressing power + volume up until you feel 1 + 3 vibrations before attempting fastboot or flash mode.
ChikeD said:
Is your bootloader unlocked?
Make sure it's turned off by pressing power + volume up until you feel 1 + 3 vibrations before attempting fastboot or flash mode.
Click to expand...
Click to collapse
Yes, it's unlocked
Yes, I tried
Please someone help!!!!
Could you connect fastboot/flash mode on the PC you are using now before it happen?
Ok, here it goes...
You know? The same exact thing happened to me, I'll tell you the solution. (yeah, sound like a TV commercial)
Power off the phone by pressing and holding the Power and Volume up buttons, when it vibrates three times release.
Now you have to turn it on in fastboot mode, connect the phone to the computer, press the power and vol up buttons, after two seconds release the power button and you have the blue led, always hold the up button.
Now at this time you need to be fast as ****, because you need to flash the boot.iso kernel in the .zip, if your phone is recognized by flashtool, obviously.
When you have the kernel flashed then reboot the phone and hold the vol up button when the led of many colors blinks, and hell yeah, we are on CWM. At this step, you have to do the same procedure as you did, but be careful this time. If something happens just tell me.
Don't forget to format the system.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Just a fact, there's a lot, but a LOT of threads that are made because of the munjeni's ROM, if you have a doubt, search first, then post.
manudo said:
Ok, here it goes...
You know? The same exact thing happened to me, I'll tell you the solution. (yeah, sound like a TV commercial)
Power off the phone by pressing and holding the Power and Volume up buttons, when it vibrates three times release.
Now you have to turn it on in fastboot mode, connect the phone to the computer, press the power and vol up buttons, after two seconds release the power button and you have the blue led, always hold the up button.
Now at this time you need to be fast as ****, because you need to flash the boot.iso kernel in the .zip, if your phone is recognized by flashtool, obviously.
When you have the kernel flashed then reboot the phone and hold the vol up button when the led of many colors blinks, and hell yeah, we are on CWM. At this step, you have to do the same procedure as you did, but be careful this time. If something happens just tell me.
Don't forget to format the system.
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Just a fact, there's a lot, but a LOT of threads that are made because of the munjeni's ROM, if you have a doubt, search first, then post.
Click to expand...
Click to collapse
Flashtool says "ERROR - This action can only be done in fastboot mode"
My PC doesn't recognise the phone
Please help
ametyst said:
Flashtool says "ERROR - This action can only be done in fastboot mode"
My PC doesn't recognise the phone
Please help
Click to expand...
Click to collapse
Press volume up + USB to PC that should go into fastboot mode
Sent From My Xperia U With An Ultimate XNovaThor Rom
dara007_168 said:
Press volume up + USB to PC that should go into fastboot mode
Sent From My Xperia U With An Ultimate XNovaThor Rom
Click to expand...
Click to collapse
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
ametyst said:
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
Click to expand...
Click to collapse
U mean Blue light? Pc doesn't recognize doesn't mean that driver problem maybe change usb and try again
Sent From My Xperia U With An Ultimate XNovaThor Rom
ametyst said:
It doesn't stay in fastboot mode. Purple light is on for like 2 or 3 seconds and then it turns off and my pc doesn't recognize the device!!!
All driver installed!!
Click to expand...
Click to collapse
Read my post dude, connect the USB cable, hold power and vol up buttons and two seconds later release power button and continue holding up.
In that time you should flash the boot.iso, but quick.
which os you are using in your pc ?
Solved
Thank you all guys, I think it was a driver problem.
I was using a Pc OS Windows 8, and it didn't recognize the phone.
I tried with a Win 7 PC, installed driver and everything, and i succeded to flash the boot.img
ametyst said:
Thank you all guys, I think it was a driver problem.
I was using a Pc OS Windows 8, and it didn't recognize the phone.
I tried with a Win 7 PC, installed driver and everything, and i succeded to flash the boot.img
Click to expand...
Click to collapse
You can flash from Windows 8 too, just you have to read this guide. http://forum.xda-developers.com/showthread.php?t=2447283
But, ok, you flashed it, great.
More specificly, I used to have Win 8.1
Now, for other causes I'm back to Win 8 and from here i can flash perfectly
I'm writing this for someone else who may have the same issue
:good:
Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)
So I think I bricked my phone ya all. I used the one click root after I unlocked boot loader and everything worked fine until I had to reboot my phone. All of a sudden the nfc has crashed pop up made my phone inoperable. I booted into twrp with the intention to wipe cache. After I did that the phone stopped booting all together.
I tried putting the phone in fast pot mode and the blue led displays but it's not being recognized by the pc. I downloaded flash tool hoping I can flash a stock image back but same issues. If I press volume down the led turns green and for a few seconds flash tool will recognize the phone.
Does anyone have any ideas? Phone now turns on but won't go past the splash screen where Sony logo is displayed.
If flash tool recognizes phone and there is light game is not lost. I would call this semi-brick. Did you flash all? Maybe you just need to try again.
orbphobic1 said:
So I think I bricked my phone ya all. I used the one click root after I unlocked boot loader and everything worked fine until I had to reboot my phone. All of a sudden the nfc has crashed pop up made my phone inoperable. I booted into twrp with the intention to wipe cache. After I did that the phone stopped booting all together.
I tried putting the phone in fast pot mode and the blue led displays but it's not being recognized by the pc. I downloaded flash tool hoping I can flash a stock image back but same issues. If I press volume down the led turns green and for a few seconds flash tool will recognize the phone.
Does anyone have any ideas? Phone now turns on but won't go past the splash screen where Sony logo is displayed.
Click to expand...
Click to collapse
Select firmware on flashtool and prepare ot for flashing. When flashtool prompts you to connect your phone, do it then. That way it will stay on flashmode
Sadman Khan said:
Select firmware on flashtool and prepare ot for flashing. When flashtool prompts you to connect your phone, do it then. That way it will stay on flashmode
Click to expand...
Click to collapse
The thing is when I put the phone in fastboot mode it does not vibrate like it used to. Right now the led just turns blue and nothing happens. Flashtool won't even recognize the phone when its in this state. If I disconnect from cable and press the volume down key the led turns green and for a few seconds flashtool will identify the phone but then it stops...
Flashmode is when you use volume down. When flashtool prompts you to connect the phone, only then press and hold volume down button while connecting. The flashing will begin immediately.
---------- Post added at 08:25 PM ---------- Previous post was at 08:22 PM ----------
Fastboot is volume up. That's just for flashing kernels usually. For flashing ftfs use flashmode which is accessed using volume down. First go to flashtool, click on the flash icon, click on flashmode, select the firmware and click flash. Then wait. When flashtool tells prompts you to connect, only then do so. Also, use the latest flashtool and the latest drivers
Sadman Khan said:
Flashmode is when you use volume down. When flashtool prompts you to connect the phone, only then press and hold volume down button while connecting. The flashing will begin immediately.
---------- Post added at 08:25 PM ---------- Previous post was at 08:22 PM ----------
Fastboot is volume up. That's just for flashing kernels usually. For flashing ftfs use flashmode which is accessed using volume down. First go to flashtool, click on the flash icon, click on flashmode, select the firmware and click flash. Then wait. When flashtool tells prompts you to connect, only then do so. Also, use the lastest flashtool and the latest drivers
Click to expand...
Click to collapse
Sadman thank you. That worked.
orbphobic1 said:
Sadman thank you. That worked.
Click to expand...
Click to collapse
Glad to help
Hi,
I installed the lineageOS Android 7.1. Then i tried to go into recovery Mode but this was not a Recovery like TWRP or sth. It was like a Stock on Samsung, where i can choose from apply update... Then i wanted to reset my phone to run a new rom but i formated my Phone!
And now if i try to start my phone it only vibrates and if i connect to my PC the Led goes from red to green in a half secound. And Flashtool says that it is in Flash Mode. If i try to Flash a stock version, everytime a error!
I also tried the Repair function of Xperia Companion but everytime i want to go into Flash Mode. It says a Error.
PLEASE HELP ME!
Did you try to flash the ftf file ?
Plug your phone to pc and repair it via sony companion ?
Try it again! Connect it to pc and then press and hold power button and VOLUME UP
LILOGLP said:
Hi,
I installed the lineageOS Android 7.1. Then i tried to go into recovery Mode but this was not a Recovery like TWRP or sth. It was like a Stock on Samsung, where i can choose from apply update... Then i wanted to reset my phone to run a new rom but i formated my Phone!
And now if i try to start my phone it only vibrates and if i connect to my PC the Led goes from red to green in a half secound. And Flashtool says that it is in Flash Mode. If i try to Flash a stock version, everytime a error!
I also tried the Repair function of Xperia Companion but everytime i want to go into Flash Mode. It says a Error.
PLEASE HELP ME!
Click to expand...
Click to collapse
What you has entered is still a recovery, but it is called LineageOS recovery, it can be triggered by pressing VOL- while the purple LED lights up.
Can you post the flashtool log for me to have a look?
---------- Post added at 12:25 PM ---------- Previous post was at 12:24 PM ----------
dieccast39 said:
Plug your phone to pc and repair it via sony companion
Try it again! Connect it to pc and then press and hold power button and VOLUME UP
Click to expand...
Click to collapse
Sony PC Companion or Xperia Companion wont work for unlocked bootloader device.
And holding VOL+ button via plug in leads to FASTBOOT mode, not FLASH mode (or DOWNLOAD mode). Please do not mislead others.