i got the phone yesterdayright away updated it to miui7.3.6.0 global stable today installed asphalt 8 and found out sensor is not working properly the car just keeps on moving to right side
tried searching found a few thread on miui forum but no answer
is there a way to fix it or should i ask for replacement
Calibrate gyro
You should try calibrating your device, found same while playing real racing 3, there was a calibration options in the settings, it asked me to place the device on a full flat surface and tap calibrate or something, i did and the issue was solved! Tap on kernel version in about phone and you'll enter into device testing option where you can calibrate your gyro... hit thanks if it helped..
macgyver_classic said:
You should try calibrating your device, found same while playing real racing 3, there was a calibration options in the settings, it asked me to place the device on a full flat surface and tap calibrate or something, i did and the issue was solved! Tap on kernel version in about phone and you'll enter into device testing option where you can calibrate your gyro... hit thanks if it helped..
Click to expand...
Click to collapse
There no calibrTion in setting but tried on of phone through setting clicking 4-5 times on kernel then tested the gyro its shows nothing then restarted the device and again its working but after sometime its the same
Is it a software bug or a hardware issue
mangomonkey00 said:
There no calibrTion in setting but tried on of phone through setting clicking 4-5 times on kernel then tested the gyro its shows nothing then restarted the device and again its working but after sometime its the same
Is it a software bug or a hardware issue
Click to expand...
Click to collapse
Here's a calibrate option to calibrate your gyro, it can be found by tapping multiple times on kernel in about phone, place your phone on a flat surface Like a reading table, at this time the x y and z readings should be zero, if it's not, place calibrate and don't move your device, after successful calibration it'll show calibration success toast message, check the attachment below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There was no reading when the issue is there but i can get reading after restarting the device
Related
Any idea what's up with this? Surely this isn't meant to happen. I don't even use google maps, don't think I've even opened it ever.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: Saw that there was an update pending. Installing, will report what happens.
Mine is almost always 90% display, even though I have all of the power saving options set on my Mesmerize... My battery lasts maybe 8-9 hours, but usually more like 6-7. It's terrible. Any ideas?
Its a known bug, install autostart from market and desible the autostart option for google maps. Try this and you will get a lot more battery.
boykioy said:
Its a known bug, install autostart from market and desible the autostart option for google maps. Try this and you will get a lot more battery.
Click to expand...
Click to collapse
sorry to revive and thread. I installed autostart, but not sure exactly how to disable the google maps or other apps. Any clue or pointers?
TIA.
Try using titanium backup (free) and freeze google maps or , if you don't use it, delete it using the same.
reidanthony said:
Mine is almost always 90% display, even though I have all of the power saving options set on my Mesmerize... My battery lasts maybe 8-9 hours, but usually more like 6-7. It's terrible. Any ideas?
Click to expand...
Click to collapse
Whoa. Do you have the touchscreen bug fix kernel applied? Because without that CPU usage on touching the screen is way too high and that would cause a lot more battery usage. 90% is still too much though.
And yeah, I updated to the latest version and it doesn't seem to be doing any weird stuff now. I'll keep a watch over the course of the day.
this is a bug that is stated somewhere in the thread.. either Cyanmod7 or Gingerbread. both have these problems.
I upgraded to official LG V20C Gingerbrad 2.3.3 and now the compass doesn't work at all. The compass ever shows about 180 degrees. If I rotate the phone the compass rotates with it showing always 180 degrees. In other words it doesn't track North at all. It just stays pointing in the same direction and turns with the phone, like it was stuck. I've tried every compass app I can find and have calibrated it over and over and still the same issue.
A my friend has the same problem.
Does anyone know how to fix it?
Someone has the same problem?
Thanks.
The calibration apps are completely useless. Take your phone in your hand and move it like this in front of you about 3 times:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it does not work - sorry, nothing that could be fixed.
just to clarify the previous post...
do NOT just move the phone in a figure 8 patern with it still pointing in the same direction...you need to move the phone so that sometimes the top of the phone is pointing away from you and sometimes toward you....does that make sense?
Ice
With V10A_00 (Android 2.2) or V10E_00 (Android 2.2.2) any movement I should make calibrated compass, with V20C_00 no movement calibrate it. Therefore augmented reality apps (Street view, Google Sky Map, some games, etc...) no works fine. I reinstalled 2.2.2 and everythings works.
No one has the same problem?
I have exactly the same problem as described here.
Compass will work after a rebbot (not always) but then when it gets the abnormal magnetic interference message it stops using the magnetic sensor and reacts to tilts!!
Only a reboot can't ix it after. It appears this is a common bug in gingerbread roms well known.
The weirdest thing is that doesn't happen on another lg p500 with same rom and kernel.
Ideas Anyone?
Well I have my compass running for a complete day now without failures.
I guess the wipe rotate settings on amun rah recovery has done the trick, although I am not completely sure about it. The truth is that it never had so much time running correctly since I updated to ginger.
New Info :
The bug returned and I finally found a way to get rid of it.
When your compass does not work just close compass apps, make a call (to voicemail for example) and... IT WORKS AGAIN!
Weird...
Hi, i bought a Samsung smart led lamp, that connects using Bluetooth Low energy and MESH network to control color temperature and on/off with android app,( which haven't been updated since last year) it seems like Samsung suddenly killed this project, with no news about it, its a great and useful smart led lamp but the app is not working properly, i had problems pairing in first place as app kept crashing but after i got it to work there was no problems, until i updated my s5 from 5.0 to 5.1
after that the app loops between searching and re requesting connection to device, and every time it loops the lamp dims to show a connection attempt, but nothing else happens, so i cant get to menu, where is a option to re-initialize the lamp, ( which doesn't seem to working as well) there is no buttons on the lamp and no info about "manual reset", i tried a fresh install , a different phone and phone with kitkat, but all just crash and loop, also when i try to pair using Bluetooth menu it gives me a error: incorrect pin or password, but it doesn't ask for one, i tried the "forcestop bt share" etc but nothing seems to work, also no stop form Samsung and the email address they give in app page in play store is not in use.
also the log of crash points to : source method: FindViewUnlocked and stack trace starts with: "java.lang.illegalArgumentExpection:View=android.widget.FrameLayout{fe9f3fd V.E.... .....I. o,o-960,192} not attached to window manager"
So now for the real question: is there a way to manually reset the lamp or bypass the pin/password?
sorry if wrong subforum or etc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can't connect
Hello,
I can't connect to my samsung smart light neither.
Have you found a trick to reset or smtg ?
Tanks
Try to upgrade the version of the app on your mobile.
Hi. I got same problem. Got two lamps and cant connect to any of them.
Any solution to this?
any solution?
any solution?
I also get 2 bulb. Any solution?
Hello,
I'm having troubles with the auto brightness in the Realme GT 2 Pro.
I ordered the first device from Amazon and saw that the screen brightness is too low when the auto brightness is activated. So I asked for a replacement. Today I got a second GT 2 Pro with the same problem.
I checked the engineering menu of the device by entering the code *#899#
and saw that the light sensor is detecting low lux value in compare to other android devices I have.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The parameter seem to be set on 1000 by default.
I tried all the ways to change this value (including after sale calibration option) but it seems that there is some problem which prevents calibration to be done.
I tested the calibration on a Realme GT neo 3 phone, the calibration can be done successfully.
Any ideas to fix this?
I will have to return the second GT 2 Pro phone because of this problem if no solution
Thanks for any help.
BR,
Majd
Same problem here and no solution. Amazon offered me a discount, which I accepted. I no longer use auto-brightness, but use a shortcut of the volume buttons for quick brightness changes.
6055 said:
I tried all the ways to change this value (including after sale calibration option)
Click to expand...
Click to collapse
I have the same, can you describe how you tried to change these parameters?
Koalakol71 said:
I have the same, can you describe how you tried to change these parameters?
Click to expand...
Click to collapse
By opening the engineering menu:
Phone > *#899# > after sale device calibration > enter 6776 > skip calibrations till AS front light calibration. This is related to the light sensor. The calibration fails at this point. In other phones it works in a second.
6055 said:
By opening the engineering menu:
Phone > *#899# > after sale device calibration > enter 6776 > skip calibrations till AS front light calibration. This is related to the light sensor. The calibration fails at this point. In other phones it works in a second.
Click to expand...
Click to collapse
I tried that but I can't enter 6776, a popup shows the message: "module calibration needs cali-devices, wrong ca..."
Hi all,
Need some help on the compass app. I a not able to calibrate the Compass. Calibration will start but after some minutes it seems to drop the data and start to circle and shows in all directions but not to the north. I am on the actual C.16 version in Germany. Any ideas ? I already cleared all data and cache from the compass app.
Regards
Flummi
Can you make a video recording of the screen how it behaves?
here the video
Try the calibration outside, I didn't use the compass application, I had it disabled, if it looks like it works
Spoiler: Video
Stano36 said:
Try the calibration outside, I didn't use the compass application, I had it disabled, if it looks like it works
Spoiler: Video
Click to expand...
Click to collapse
First Thanks for your Help....
Mhh i tried it outside , no chance still fail...
schiwo said:
First Thanks for your Help....
Mhh i tried it outside , no chance still fail...
Click to expand...
Click to collapse
Have you tried without a case?
Stano36 said:
Have you tried without a case?
Click to expand...
Click to collapse
Yes .....
Does it show high accuracy in google maps after calibration?
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes even callibrating with Maps ....it works than for a minute ...then ...North will move somewhere ...
schiwo said:
Yes even callibrating with Maps ....it works than for a minute ...then ...North will move somewhere ...
Click to expand...
Click to collapse
I asked a quick question on Telegram and compass works for everyone .
Spoiler: Telegram
Try doing a factory reset.
Edit:
Enter on the dial pad
*#899#
Manual test
Device Debugging
Msesor
How does the sensor behave, does it show one position or does it rotate like a compass?
Thanks Stano ..... i did a quick video , after factory reset
schiwo said:
Thanks Stano ..... i did a quick video , after factory reset
Click to expand...
Click to collapse
Has the compass also stabilized?
I got the same problem, when using gmaps, walking it works perfect at start but suddently it shows wrong direction and if i reset the navigation and start it right away it works again but later on gets crazy again... Must be software related...
PS: im on latest eu rom
On my gt2 pro calibration does nothing. So the compass app does not even start. Also gdpr version of the phone.
The manual test is not a calibration, it is a test of the Magnetic Sensor. If the value is stable in the manual test and the needle flies in the compass application, then the problem is with the compass application.