I bricked my RN3 a bit ago flashing without Safe TWRP and I have paid the price, I left it for a while and lately I wanted to try Rootjunkys method to unbrick. I plugged it into my computer and it worked fine so I plugged it into my Choetech QC2.0 multi charger and then the RED LED stopped blinking. Now when I plug it into my PC I got an error saying that the device requested more power than the USB port could provide and malfunctioned... Please help me.
you can use modded fastboot to go in edl mode or directly flash fastboot rom in fastboot mode if it is working
Sent from my Redmi Note 3 using Tapatalk
Camlin3 said:
you can use modded fastboot to go in edl mode or directly flash fastboot rom in fastboot mode if it is working
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Please read the full post, I can't use the phone at all
Related
Hey guys,
I am new to Xiaomi Devices, Just got a Redmi Note 3 Snapdragon variant from India. Let me get to the issue at hand. I have tried to get to EDL mode and i have been successful, but the issue is that the device is then not staying in EDL mode, but rather its rebooting after 5 or 6 secs of EDL mode. Is there any way to solve this?
Please note : Using Windows 10 , MIUI 7 latest Stable version.
Is there any one who can help me out?
shyam2010 said:
Is there any one who can help me out?
Click to expand...
Click to collapse
How are you booting to EDL mode?
stephendt0 said:
How are you booting to EDL mode?
Click to expand...
Click to collapse
I am booting to EDL mode by following these steps.
Shut down phone - then volume down + power to fastboot - then connect to PC - Then boot to EDL by double clicking a .bat file in my pc
everything goes well and boots to EDL mode - led blinks for 5 - 6 times, then mi logo appears, phone has shut down automatically
Beats me..! Tried another pc?
stephendt0 said:
Beats me..! Tried another pc?
Click to expand...
Click to collapse
Thanks for trying to help me though ! Will try on another PC, maybe its because of my previous Phone's ADB drivers.
shyam2010 said:
Thanks for trying to help me though ! Will try on another PC, maybe its because of my previous Phone's ADB drivers.
Click to expand...
Click to collapse
ever resolve this?
Dear Friends today I flashed my redmi note 3 using EDL flash and it went success but after that my device is not turning on and its always on EDL mode only. please help me.
Try to press power button at least 30 to 40 sec...or till u see mi logo
It's hard bricked I think
Sent from my LS-5010 using XDA-Developers mobile app
How can hard brick happen with miflash edl?
bhanuchowdary said:
Dear Friends today I flashed my redmi note 3 using EDL flash and it went success but after that my device is not turning on and its always on EDL mode only. please help me.
Click to expand...
Click to collapse
Connect to pc with usb cable and wait until battery fully discharged. And recharge it for 3 hours. and press power buton for 20-25 second it will open.
What does the windows device manager say when your phone is connected to the pc? If it has something like "900E" mode you need this http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928 . This helped me out as my phone was dead. It only works when your battery is not completely discharged.
If you have "9008" mode in device manager, you are really in the EDL mode. So it is no problem to flash an appropriate fastboot rom with mi flash tool. Maybe you need the latest beta from mi flash tool though.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
redminote3 said:
How can hard brick happen with miflash edl?
Click to expand...
Click to collapse
happend to me after i tried to unlock my bootloader. I put a modified bootloader to the rom that i wanted to flash. After that my phone was dead, had only HS USB 900E in device manager
Yeah i know that can happen on locked BL, but I thought on unlocked
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Just checking, but did you use the fastboot edl v2 to enter EDL?
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
when i fail to unlock bootloader in official method then i tried miui8 flashboot Rom from mi flash tool with modified emmc_appsboot.mbn file from one of the developer i bricked my Redmi note 3 Qlcmm650
solution:- 1) remove back cover & disconnect the battery around 1 minute reconnect it (recomended one if this not possible for you then try 2nd method)
Or
2)full discharge the battery Then charge it more then 35% (it will also work as diconnecting the battery)
connect the computer &and press volume + & - button together
connect the PC & vol buttons press both are at the same time then you enter the correct EDL mode (same red light but this time correct EDL mode you can flash the rom use official Fastboot rom Dont modify the contents)
if i helped you hit thanks
I was in same situation today: Mobile doesnt do anything else then red-blinking, no edl or fastboot. Pc only saw "Qualcomm HS-USB Diagnostics 900E".
Found the solutions mentioned by Chinmayhegde, but i didnt get the cover off the device and dont want to damage new mobile.
then i found the method "Deep Flash".
its small manipulation of usb-cable: put a small wire on second terminal, put in pc and then pull the wire.
i succeded after second try. then pc sees "Qualcomm HS-USB QDLoader 9008" again and miflash is able to flash the device.
see this tutorial for creating the modded usb cable: http://en.miui.com/thread-310325-1-1.html
Hope it works
if your phone still able to enter fastboot, you can try to use fastboot to edl v2 to enter download mode
if it still not help, most safe & easy mode is using deep flash cable as above post
I have same problem.
Even I try booting fastboot mod but it keeps restarting.
Even fastboot logo comes by just pressing volume down button. So I think power button is stuck. That's make phone restart all the time.
How to overcome this problem?
Thanks
Sent from my SM-G900I using XDA-Developers mobile app
I fix my phone.
Open back cover and undo power cable flex and battery connctor from motherboard and put back after 1 min.
Phone started normal.
thanks
Sent from my SM-G900I using XDA-Developers mobile app
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
Try To Remove Your Battery than Use MiFlash Tool To Flash Your Mobile Bro.
Hi
Actually, I have a redemi note 4x device. last week unfortunately I flashed a wrong Rom on my phone and it became brick
I can not turn it on and it does not go to recovery mode or fastboot mode or anything
I understood that I need to flash the Rom with deep flash cable
I ordered deep flash cable and followed instructions but my laptop does not recognize Qualcomm driver
I press the bottom on the cable and then connect the phone but it does not recognize it
it is really annoying that I can not do anything for it
I have heard redemi note 4x does not go to EDL mode with this cable is that true?
Has anyone any solution?
Ps: I opened the back of the of the phone even tried to use 2 points to jumper but it did not work really so I ordered the cable but it seems the cable is also not working
I appreciate if anyone knows a way regarding this problem
Thanks and Regards
flash firmware then rom
Hello AllI have redmi note 11 4G selenes version [ CN ] im trying to install V12.5.15.0.RKUMIXM Global . first time is worked so nice because i just flash SUPER.IMG BOOT.IMG USERDATA.IMG Vbmeta.Img _system _vendor
after update i have some issue im try to reflash Rom but i tic flash all.Bat after installation completed my phone was fully Dead
no charging after 24h in charge
when i Plug usb in Pc i show connect after 2 seconde disconnected
im try to remove battery and replug but no sucsess
im try all methode by sp flash tools and MTK Utility Miflash and all with python command but still plug inplug usb port all time
please i need user experience to fix my problem
i buy it from 2 day only
and thinks all
sorry for my bad english
Your screen wont turn on?
Trevorek said:
Your screen wont turn on?
Click to expand...
Click to collapse
Yes Bro not turn on in usb or in charge all time still off
i have try ininstall usb port driver now i can access to my phone via MTK meta mode utility
help please
Any one here can help me
HAITHEM00216 said:
Hello AllI have redmi note 11 4G selenes version [ CN ] im trying to install V12.5.15.0.RKUMIXM Global . first time is worked so nice because i just flash SUPER.IMG BOOT.IMG USERDATA.IMG Vbmeta.Img _system _vendor
after update i have some issue im try to reflash Rom but i tic flash all.Bat after installation completed my phone was fully Dead
no charging after 24h in charge
when i Plug usb in Pc i show connect after 2 seconde disconnected
im try to remove battery and replug but no sucsess
im try all methode by sp flash tools and MTK Utility Miflash and all with python command but still plug inplug usb port all time
please i need user experience to fix my problem
i buy it from 2 day only
and thinks all
sorry for my bad english
Click to expand...
Click to collapse
Hey Friend) I Did same, things did you find any solution????
alo. fix dc chưa bạn
You're in the wrong forum - this is the forum for the 11S (fleur). It doesn't look like a forum exists for your device, so maybe get in touch with the Xiaomi device moderators by reporting this thread and they can make one for you.