Related
I had the Odin TMO 2.2 on and then I tried to flash back to 2.1 but totally forgot about probably needing a different kernel. Now my phone can restart but gets stuck at the locked screen on boot-up but I can't slide the screen to get onto the device. It just sits there and vibrates randomly (like it does when an app force closes). I am able to get into Download mode while plugged into the computer and Odin open but Odin does not pick up my device (I have tried to open/close Odin many times too). My PC(win7 x64) does not recognize the device while in DL mode either saying "Gadget Serial" and can't find drivers. I have re-downloaded all the drivers and tried to point the device to them but still no go.
I need some help to get my phone back before the wife kills me for messing with "something that is not broken in the first place"!!!!
Sometimes it just doesn't work on win7, personally I have had success with the pc recognizing dl mode on some win7 systems and failure on others. If you can get to dl mode you haven't lost it, its only a soft brick. What you need is a different pc, preferrably windows xp, load up drivers, odin, hit dl mode and you should be good to go.
Sent from my Vibrant running Macnut R10
Yes!!! I got odin to recognize the phone. I tried to use a pc with xp but still wasnt able to at first. I then installed the latest version of kies and that had the driver to recognize the "gadget serial" device. Then odin and back a live!!
Sent from my SGH-T959 using XDA App
Just2swim said:
Yes!!! I got odin to recognize the phone. I tried to use a pc with xp but still wasnt able to at first. I then installed the latest version of kies and that had the driver to recognize the "gadget serial" device. Then odin and back a live!!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Email me if u need help [email protected]
Sent from my SGH-T959 using XDA App
Just2swim said:
Yes!!! I got odin to recognize the phone. I tried to use a pc with xp but still wasnt able to at first. I then installed the latest version of kies and that had the driver to recognize the "gadget serial" device. Then odin and back a live!!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Right on! Glad to hear it.
Sent from my Vibrant running Macnut R10
so i tried to flash the new jb 4.1.2 today via mobile odin pro from stock ics ...i copied the extracted firmware file to my external sd card and mobile odin picked it so i proceeded to flash firmware...it then goes to the screen with the green android and spinning gear but it gets stuck at about quarter of the way and now it wont go any further...been stuck for about 30mins so i pulled the battery and tried rebooting normally but now the only thing i can do is boot into download mode it wont enter recovery at all...
also pc odin wont detect my phone now when i go to download mode....
i neeeed some help...got to get the phone up again as its my only fone now
Its a uk o2 unlocked gti9100
Are you install kies on your PC?
Sent from my GT-I9100 using xda app-developers app
Install drivers for phone on pc, start odin, connect mobile.
checked drivers on pc?
tried flashing on another pc?
wishmas7er said:
checked drivers on pc?
tried flashing on another pc?
Click to expand...
Click to collapse
Tried on multiple pcs and installed keis on all but odin just wont detect the phone when in download mode...i,m using a blackberry usb cable as well which worked before when i upgraded to ics a mnth ago..gonna give it another try shortly but is there anything else u guys can think of to allow it to connect or point me to the latest drivers for it
kooliebwoy said:
so i tried to flash the new jb 4.1.2 today via mobile odin pro from stock ics ...i copied the extracted firmware file to my external sd card and mobile odin picked it so i proceeded to flash firmware...it then goes to the screen with the green android and spinning gear but it gets stuck at about quarter of the way and now it wont go any further...been stuck for about 30mins so i pulled the battery and tried rebooting normally but now the only thing i can do is boot into download mode it wont enter recovery at all...
also pc odin wont detect my phone now when i go to download mode....
i neeeed some help...got to get the phone up again as its my only fone now
Its a uk o2 unlocked gti9100
Click to expand...
Click to collapse
Was ur stock ICS rooted before using 'Mobile Odin'
Before using Odin kill/close all kies services and stuff.
Sent from my GT-I9100 using xda premium
Sun90 said:
Was ur stock ICS rooted before using 'Mobile Odin'
Click to expand...
Click to collapse
Yes it was...
Dunno if i have the latest drivers but my version now is 1.5.16.0
kooliebwoy said:
Yes it was...
Dunno if i have the latest drivers but my version now is 1.5.16.0
Click to expand...
Click to collapse
1) try with Diff version of ODIN ( 1.85 or 3.04)
2) on a diff windows ( Xp or win7)
3)if on win7 then try running 'Odin' with 'Administrative rights' and see.
4)check with windows Task manager and see if any Kies process are running, if so kill them all and then try.
rgabi88 said:
Before using Odin kill/close all kies services and stuff.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ive tried killing all keis processes but it still wont detect it..even used a fresh win 7 pc and just installed drivers only but still no luck
Sun90 said:
1) try with Diff version of ODIN ( 1.85 or 3.04)
2) on a diff windows ( Xp or win7)
3)if on win7 then try running 'Odin' with 'Administrative rights' and see.
4)check with windows Task manager and see if any Kies process are running, if so kill them all and then try.
Click to expand...
Click to collapse
I just tried 3 versions of odin (1.85/3.04/3.07)
Still a no go
still need help...phone just wont get recognised by my pc...
Have you thought about how to borrow s2 if you have the chance. Then it attempts to connect to Kies and see what happens. Kies should install drivers or just recognize it. After that need you to disconnect the mobile phone from the PC. Shut Kies. Put your phone into download mode. Turn Odin on PC. Connect the mobile phone with PC and seen whether it recognized. After that, put your phone into download mode and connect it to Odin.
Sent from my GT-I9100 using xda app-developers app
Marin0803 said:
Have you thought about how to borrow s2 if you have the chance. Then it attempts to connect to Kies and see what happens. Kies should install drivers or just recognize it. After that need you to disconnect the mobile phone from the PC. Shut Kies. Put your phone into download mode. Turn Odin on PC. Connect the mobile phone with PC and seen whether it recognized. After that, put your phone into download mode and connect it to Odin.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Will give that a try...thanks
And? At what stage are you? Working or not?
Sent from my GT-I9100 using xda app-developers app
Marin0803 said:
And? At what stage are you? Working or not?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thanks all for the help all..i've solved my problems....
turns out the usb/charging port was bad...seeing that i was able to get into download mode and no pc would detect it..i found a local guy selling parts and took it...as soon as i put it back together and connected it...bam! pc odin picked it up..so i flashed the official jb and now am back in business...:victory:
My LG E970 does not have an usb connection to the computer.
I tried connecting in fastboot and ADB via command prompt, the computer does not see it.
It says slow charging when connected to a computer, 2 different computers.
I have the LG united drivers installed, reinstalled and rebooted.
I was on 4.4 and I did a restore to stock ATT 4.1.2, still no luck.
I'm out of ideas.
EDIT:
I tried LGNPST from: http://pastebin.com/bRpR3aB6
I put it into download mode and the phone shows "DOWNLOAD MODE" "DO NOT UNPLUG the device until the process is complete"
It only shows that, LGNPST does not detect anything.
edroit said:
My LG E970 does not have an usb connection to the computer.
I tried connecting in fastboot and ADB via command prompt, the computer does not see it.
It says slow charging when connected to a computer, 2 different computers.
I have the LG united drivers installed, reinstalled and rebooted.
I was on 4.4 and I did a restore to stock ATT 4.1.2, still no luck.
I'm out of ideas.
EDIT:
I tried LGNPST from: http://pastebin.com/bRpR3aB6
I put it into download mode and the phone shows "DOWNLOAD MODE" "DO NOT UNPLUG the device until the process is complete"
It only shows that, LGNPST does not detect anything.
Click to expand...
Click to collapse
From there you need to select the ls970.dll and the bin file in lgnpst.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
From there you need to select the ls970.dll and the bin file in lgnpst.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
It won't let you select anything unless something is detected. Example: "UNKNOWN PORT 01"
And nothing is detected.
edroit said:
It won't let you select anything unless something is detected. Example: "UNKNOWN PORT 01"
And nothing is detected.
Click to expand...
Click to collapse
Try Kush's universal adb drivers for windows. If you are running Win8.1, make sure it's usb2.0 and not 3.0. If it still doesn't see it, try a different windows os.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Try Kush's universal adb drivers for windows. If you are running Win8.1, make sure it's usb2.0 and not 3.0. If it still doesn't see it, try a different windows os.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
I tried the different drivers, still "slow charge mode on the phone." It is suppose to pop up that USB debugging notification on the phone if it senses a computer connection. I'm using windows 7 and usb 2.0 only. Tried on different computer, still slow charging mode.
did you turn on "usb debug" in setting->Develop options?
savingwizard said:
did you turn on "usb debug" in setting->Develop options?
Click to expand...
Click to collapse
Yes, it is on. Still only "slow charging mode"
Still not working after I flashed SnowLepoardJB's 800MB+ stock ROM. Any other suggestions?
Hi, I'm joining this thread since I have the same problem... My phone charges, but no device connection. Could there be a kernel module missing? Is there a way to check? A #lsmod type command?
Sent from my JY-G3 using xda app-developers app
Ok... I got a new USB cord and it works now.
Sent from my JY-G3 using xda app-developers app
brainstormtrooper said:
Ok... I got a new USB cord and it works now.
Sent from my JY-G3 using xda app-developers app
Click to expand...
Click to collapse
Good for you. I tried different USB cords, and it still doesn't work.
Well, if you can select USB debugging and charge the phone over USB, but the phone doesn't notice the computer then it may be a damaged USB port... I saw a thread about that on a Kindle I think... But it sounds like software isn't the problem... Good luck.
Sent from my JY-G3 using xda app-developers app
I recently had the same problem and my solution was to use the Koush Universal ADB Driver recommended by someone else. Prior to that all I could see the contents of my SD card and external SD card on the computer but always had some sort of driver issues and Windows telling me my driver wasn't installed correctly.
Using the official LG driver from the website didn't seem to help either.
OK... I know this thread has gotten old, but here's the final deal... It wasn't "exactly" the USB cables. It WAS the plug. The plug wasn't broken, just very dirty. I cleaned it out with a toothpick and now even the old cord works fine... So if you can't get the computer and phone to recognize each other, try cleaning the micro port in the phone
Sent from my JY-G3 using XDA Free mobile app
can't connect in download mode with Windows 8.1
brainstormtrooper said:
OK... I know this thread has gotten old, but here's the final deal... It wasn't "exactly" the USB cables. It WAS the plug. The plug wasn't broken, just very dirty. I cleaned it out with a toothpick and now even the old cord works fine... So if you can't get the computer and phone to recognize each other, try cleaning the micro port in the phone
Sent from my JY-G3 using XDA Free mobile app
Click to expand...
Click to collapse
My issue is that I can't connect to my computer with Windows 8.1 in Download Mode. If I want to flash, I need to find a friend who is using Windows 7. Can anybody help with this?
Other details: I've tried cleaning the ports, using another cable, using other USB connections, etc. When in Download Mode, SDK can't even detect the device. I'm pretty sure it's the fact that I'm using Windows 8.1, but I don't know what to do to fix this problem.
Thanks!
billp000 said:
My issue is that I can't connect to my computer with Windows 8.1 in Download Mode. If I want to flash, I need to find a friend who is using Windows 7. Can anybody help with this?
Other details: I've tried cleaning the ports, using another cable, using other USB connections, etc. When in Download Mode, SDK can't even detect the device. I'm pretty sure it's the fact that I'm using Windows 8.1, but I don't know what to do to fix this problem.
Thanks!
Click to expand...
Click to collapse
Not sure why you want to put your phone in download mode
If your just trying to connect your phone via USB to mount storage (meaning getting file off the internal storage and sd card), it should work fine.
If your trying to root your phone, you need to grab the android sdk and use the adb commands.
Gysper said:
Not sure why you want to put your phone in download mode
If your just trying to connect your phone via USB to mount storage (meaning getting file off the internal storage and sd card), it should work fine.
If your trying to root your phone, you need to grab the android sdk and use the adb commands.
Click to expand...
Click to collapse
The reason is that my phone is "bricked." I'm caught in a boot loop. The bootloader is locked on my LG phone so I can only get into Download Mode to fix stuff. But I can't fix stuff if my computer doesn't recognize my device. (I can connect fine when my phone boots up properly; just not in Download Mode). I've installed and uninstalled the LG drivers many times, so this is not the issue. What can I do with my Windows 8.1 computer to connect with my phone in Download Mode? Again, I CAN connect to Windows 7 computers, but I don't have one convenient to use, and I don't want to install lots of software on friends' computers...
billp000 said:
The reason is that my phone is "bricked." I'm caught in a boot loop. The bootloader is locked on my LG phone so I can only get into Download Mode to fix stuff. But I can't fix stuff if my computer doesn't recognize my device. (I can connect fine when my phone boots up properly; just not in Download Mode). I've installed and uninstalled the LG drivers many times, so this is not the issue. What can I do with my Windows 8.1 computer to connect with my phone in Download Mode? Again, I CAN connect to Windows 7 computers, but I don't have one convenient to use, and I don't want to install lots of software on friends' computers...
Click to expand...
Click to collapse
Try these steps and see if it works: http://forum.xda-developers.com/showthread.php?t=2013067
Gysper said:
Try these steps and see if it works: http://forum.xda-developers.com/showthread.php?t=2013067
Click to expand...
Click to collapse
That is what I would like to be able to do, but it assumes your device is recognized. One of the other posts on the same thread mentioned a similar issue but didn't mention a solution.
I've done some more exploring. I have, again, uninstalled and reinstalled the appropriate LG E970 drivers from the LG support site.
- When I am in fastboot mode, I see the attached image "01 Android.png" in device manager.
- When I am in recovery mode, I see the attached image "02 LG E-970.png" in device manager.
- When my phone fully boots up, I see the attached image "03 LGE Android MTP Device.png" in device manager. At this point, and only at this point, abd will list my phone as a device.
The problem is, I need a connection to my computer from recovery / download mode in case of a boot loop.
Can anyone help?
Hey guys, so I have LG G2 Mini D620R rooted Android 5.0.2 (I think). So here is the problem: whenever I try to access settings it says: ''Unfortunatelly, Settings has stopped.'' This problem happened to me few times and I solved it with LG Mobile Support Tool, it just downloads full software from internet and install it to my phone. But now I can not do that. I try to do that when my phone is on but my computer don't recognize my device and I can not select connectivity on my phone because I can not get into settings. Last time I solved this problem going to download mode an that worked. Now when I go to download mode my computer does not recognize my phone. My phone is fully functionally and I can play games, use apps, I can do anything, just I can't go in Settings and thats just annoying. Even Bluetooth is crashing and calendar. I thing this problem came because I removed some apps that came pre installed like bloatware. I think it's because of Easy Home app which is some sort of launcher. Thanks for you reply.
Download the appropriate kdz file for your device(http://lg-phone-firmware.com/index.php?id_mod=57) and flash it using lg flash tool 2014(http://forum.xda-developers.com/showthread.php?t=2797190). After that be carefull of which stock apps you will delete so that the problem does not appear again!
Yes I found tutorial to do that and there is problem. I downloaded kdz and LG Flash Tool and done all needed but whe process goes then LG Mobile Support Tool runs for 15% and message pops out ant it says that it can not find phone. I spam reply but nothing. Just my computer does not recognize my mobile phone and thats it.
G1ML1 said:
Yes I found tutorial to do that and there is problem. I downloaded kdz and LG Flash Tool and done all needed but whe process goes then LG Mobile Support Tool runs for 15% and message pops out ant it says that it can not find phone. I spam reply but nothing. Just my computer does not recognize my mobile phone and thats it.
Click to expand...
Click to collapse
Do you flash the kdz while the phone is in download mode?
gismoO said:
Do you flash the kdz while the phone is in download mode?
Click to expand...
Click to collapse
This is what I have done: I turned off phone then I have connected USB to my PC and then went in download mode. Then I have downloaded kdz file and LG Flash Tool. Then I put kdz file into LGFT and I have started process. LG Mobile Support Tool pops out. Everything went OK until message pops out saying there's no connected phone.
G1ML1 said:
This is what I have done: I turned off phone then I have connected USB to my PC and then went in download mode. Then I have downloaded kdz file and LG Flash Tool. Then I put kdz file into LGFT and I have started process. LG Mobile Support Tool pops out. Everything went OK until message pops out saying there's no connected phone.
Click to expand...
Click to collapse
1. Check that your device appears in windows device manager.
2. Run Lg flash tool as administrator.
3. Check that you have the appropriate lg driver.
4. Try another micro-usb cable.
5. Try flashing it through another pc/ different windows version.
6. Do a cse and not a normal flash.
7. Try using emergency mode instead of DIAG (in cse mode).
8. If the above do not work, consider unlocking the bootloader, install TWRP custom recovery, install CM13 and feel the difference..
Hey I installed CWM 13 and Android 6 but I forgot to put GApps in it. How can I install GApps?
Hey again, so I installed GApps but I get crashes and I can not use phone. When phone boots I get to lock screen then I draw pattern and I got several crashes. I rebooted it few times but its same.
G1ML1 said:
Hey again, so I installed GApps but I get crashes and I can not use phone. When phone boots I get to lock screen then I draw pattern and I got several crashes. I rebooted it few times but its same.
Click to expand...
Click to collapse
Use Pico version.
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
Use Pico version.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
Hey, can you tell me what should I do now? I can't go into recovery mode because I can't run anything on phone. What should I do?
G1ML1 said:
Hey, can you tell me what should I do now? I can't go into recovery mode because I can't run anything on phone. What should I do?
Click to expand...
Click to collapse
Download Pico version of GAPPS on your PC and put it on an SD.
Use the hardware key combination to enter recovery mode.
Sent from my LG G2 Mini using XDA Labs
Vagelis1608 said:
Download Pico version of GAPPS on your PC and put it on an SD.
Use the hardware key combination to enter recovery mode.
Sent from my LG G2 Mini using XDA Labs
Click to expand...
Click to collapse
THANKS MAN, thanks to all who responded, thanks xda community, thanks to all who looked at this thread.
My device is working now and I have GApps. Cheers!
I have galaxy j700f 2015. I tried to root it. So i installed twrp and rooted using odin. After i rooted i wanted to remove root. so i uninstallEd superuser. Now my device is not detect by pc. I tried more things. Usb debugging,checking new cables,checking with new computers,factory reset mobile phone,installed every drivers.........but still my device is not connecting to pc. Its only charging when i connect to pc.please help me. I downloaded MM 6.0.1 stock rom so i want to install it from odin. But odin also cant find my device. Please help me. Thank you.
It might be bricked did u backup the os?
Ummm nope. Its got seandroid enforcing error at startup. So i remove it from odin. Now phone is working well but not connecting pc via usb. Its not bricked.
Sent from my SM-J700F using XDA Free mobile app
Its in bootloader mode right?
Yeah. In developer mod option oem unlocking bootloader enable?
Sent from my SM-J700F using XDA Free mobile app
Did you check for the USB connection type setting inside developer settings? Sometimes it gets reset to "Charge only" and you have to set it to "MTP"
Install Samsung usb driver on your pc
Then it Will detect your phone