Bricked? - Verizon Samsung Galaxy Note II

Hi:
I've read through several "bricked" threads and none of them had the symptom I have so I'm not sure.....
I was on IMNUT's Tweaked Remix (VRAMC3 0906 release) and it's been acting up so I thought I'd move up to a newer ROM (I had planned to go to lacoursiere18's 4.4.2 to start).
I first updated recovery from an old version of CWM to the last version of Philz.
I flashed IMNUT's unlocked VRAMC3 stock via Odin and it booted fine although I hadn't realized I needed to wipe it first so all my apps were there.
I then booted to recovery to see if Philz was still there and found it replaced by the stock recovery (I didn't realize that would happen but I suspected it might).
So, since I used the unlocked version I used stock recovery to flash Philz. The output went by very fast and all I really caught was something about a file check failed (3 lines in red about it) and then a bunch of lines and then the screen went blank.
Now the phone will not do anything - won't turn on, won't go to recovery, won't go to download mode.
I pulled the battery and no change. I was at 60% battery when I started so I connected the USB cable to charge it. The little battery symbol that comes up while charging when you tap the power button did not come up. I tried power on/recovery/download and still nothing.
Am I SOL?

it is sure sounding like it to me... I don't think i've ever had a phone not at least go into bootloader mode.. ( vol down, home and power)

Related

[Q] Recovery Gone - Power_Out - ODM Fuse = 1

So last night something strange happened while wiping data/system. I guess someone unplugged my charger, or I had lower battery than I knew - because the power on the phone went out mid-wipe - or something.
The state of things: Currently when you put in the battery or try to boot it immediately loads a black screen with numbers and stuff instead of the usual Motorola symbol and battery charging and whatnot. This screen says things like:
PwrReason = POWER_OUT (if you just put in the batter)
PwrReason = Power_Key_Press (if I turn it on manually)
1 RSD
2 Fastboot
3 NVFlash
etc
And it gives the option to boot into RSD, fastboot, Android Recovery, etc.
RSD recognizes it as an 'engineering' model, and claims that I have bootloader version 0.00000007v or somesuch. Android recovery doesn't seem to work (or exist anymore, not even the stock version.
Plugging it in while powered off triggers the LEDs for charging/charged correctly, but not the motorola symbol or battery indicator.
If left at the current boot screen, it says:
Powering on BP
Reading_ODM_Fuse = 1
Cold_Booting_Linux
And boots into Cyanogen Mod correctly, data, phone, everything working.
I'd like to have recovery back - given that RSD recognizes it, should I try to return to stock by flashing an SBF? Should I leave well enough alone? What's the correct thing to do here - I do want to remain unlocked and on CM7, and I want my recovery mode back. All my music, files, etc are still on the device - nothing's missing.
Can you help?
Funny, the same thing happened to me yesterday. I didn't lose power or anything, I just flashed the newest CM9 alpha and when I rebooted it went to the same screen you are talking about. Everything still works fine like you said and I can still get into CWM and everything, just want to know why its going to this strange menu all of a sudden...
Sent from my MB855 using Tapatalk
Just reinstall cwm. Use adb method, or install bootstrap recovery and flash the zip version of cwm.
Sent from my Motorola Photon using Tapatalk

Phone won't boot up (rooted)

I attempted to flash MIUI.us V4 2.6.8 Atrix ByTeamMotoTegra today, and was almost successful, but I found out that I shouldn't have wiped the phone before flashing. I lost the touch functionality, and couldn't select my language. I flashed my old ROM (Neutrino) to try to flash back to MIUI, but still could not seem to get the touch funcationality.
After a few times of taking out the battery and trying to get the MIUI ROM working, I ran into a boot loop. The screen will not go past the screen with the red logo, no matter what I do. If I hold the volume up/down buttons, "starting RSD protocol support" appears, but nothing else happens. The phone just keeps turning off, then returning to the screen with the red logo. Any ideas on how to get past this screen?
i have a similar problem, i rooted and unlocked a friend atrix today on 2.3.6 version 4.5.141
it went fine and booted normally. i then went into cwm and made a mistake by not making a backup, cleared data cache and dalvik then proceeded to flash aokp. it booted but didnt go past the motorola dual core screen while still displaying unlocked. i can still go to fastboot and even into cwm as i have attempted to flash other roms after clearing all things out again but nothing is going past the boot screen.
any suggestions?
I can scroll through the other CWM menu options, but I can't boot up or anything else. Anytime I select one of the options, it will either just restart and go back to the red logo screen, or say I don't have enough battery life to flash. My battery is now completely dead and doesn't seem to be charging at all, even though it's been plugged in all night.

Galaxy Tab 10.1 Wifi P7510 stuck on battery screen

Hi
I used the factory reset function on my tab a couple days ago to delete all apps and such and upon reboot it was stuck at the slowly flashing Samsung logo and would proceed no further. I left it for a good hour and a half in that state before I tried hard resetting it but no dice. I've had it do this before when I first rooted it, but unlike that time it doesn't replay the whole boot animation, just the logo part at the end of the animation. I managed to get it in clockwork mod or bootloader whatever that function is and cleared all the caches and did a reboot recovery (i believe thats what it was called) but upon reboot it did the same exact thing. So after that I gave up and went to bed, but the next day when I went back at it again it wouldn't even turn on. After messing around with the power button and volume button trying to get into recovery mode it finally turned on but went to the battery screen with no other actions. I've tried several times to get it into recovery mode but it either wont turn on or it just goes to the battery screen. I have it plugged into my pc at the moment and apparently it is in recovery mode or something because Odin recognizes it. Says [0:COM3] and the box is yellow, but the screen never turns on though when holding the power button and volume button while it's plugged into a pc, the pc recognizes something plugged into the USB slot. My pc is only recognizing it as a modem and will do nothing else with it.
I have the Starburst rom and the overclocked kernel installed and would like to either revert it to stock rom or perhaps the AOKP rom, milestone 6. Is there any way to do this if I can't boot it into a state where I can access the SD card on my pc? All the guides I've found always require I put files on the sd card to flash in clockwork recovery mod. Thanks for any assistance
Edit: Solved it myself, feel free to delete this post. Thanks!

[Solved] Phone wont go to recovery\download mode stuck on loading screen

I have 4.4.4 KK SlimROm with Dorimanx latest kernel (Without TRIM). Recently I bought a new extended battery fully charged it and let it discharge fully once. It was s tip for a new lithium batteries on one of the first sites on google search. After that the battery wouldn't charge at all for a few hours (Stuck on 0%) but the phone could be turned fully on. I remembered that once i saw in the recovery advanced options something about battery statistic refresh or something like that and went looking for it in the recovery, didn't find anything, didn't change anything, when I exited the recovery mode it told me the root was lost and if I want to root my phone, I chose yes, then it booted to download mode for some reason, turned my phone off and it stated to charge. I was happy until I tried to turn it on. Its starting too boot, after the Samsung logo it gets to Dorimanx logo and gets stuck there, cant access Recovery or Download mode. Searched the web didn't find anything with a solution only dead threads with no answers.
Please help, I don't have money for a new phone and I waited for this Amazon battery to get here 3 month :"(
TLDR;
Discharged battery wont charge, after it started to charge stuck on kernel loading screen, cant access Download or Recovery Mode. Pls help.
After a few days I found a solution. Here it is to people who has the same problem.
Remove battery, sim, sdcard, before you pluck the battery back hold vol down, pluck it in, power phone, and it should go to download mode.
If not try power+vol down+home, power+vol down or power+home+both volume as you pluck the battery or the same combinations as you pluck in the USB cable to the phone connected to the PC. a few tries should get you here, it was my 5th on with USB and first with holding vol down before plucking the battery back.
Download Odin
download JB rom form http://androidfirmwares.net/PhoneFirmware/Download/133
download recovery from here http://galaxys2root.com/cwmtwrp-recovery/
follow instructions on how to install rom from here:
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
Install the ROM via Odin(If by chance like me you will disconnect while installing the ROM and cant connect back or stuck on setup connection, just remove the battery for a few minutes and try again, exiting and starting Odin again recommended), after that install recovery, nothing will load but check if you can go to recovery, if yes, just install the same ROM you had from recovery, wipe cache, dalvik, install same kernel, wipe cache, dalvik, it should work with some errors popping, just sync and back up everything you need and reinstall fresh.
Hope it helped.

First time trying to flash recovery phone now won't boot

Hi there,
I am new to android phone and I had an old Grand Quattro GT-I82552 to play with.
I followed the guide at xda http://forum.xda-developers.com/showthread.php?t=2494471, downloaded
- ODIN v3.07
- CWM Recovery v6.0.4.5
- Stock Recovery GT-I8552
I followed the steps and flash CWM Recovery v6.0.4.5, but on next boot it won't go to CWM recovery mode (I did removed battery first). I tried many times with other CWM from different sources and now my phone won't boot, it just show up the Samsung Logo with yellow triangles, then shutdown. It doesn't look like a loop boot, as it shutdown entirely. I can't charge the phone either.
I can still go in the usb downloading mode so I flashed the stock recovery, no luck, phone still can't boot.
Any advice is appreciated. Thank you.
EDIT: I found out that I was too careless to noticed that Volume UP is required for boot into CWM, instead as Volume DOWN. So I can boot into CWM now, however I supposed I can withhold my SuperSU install, and just boot into my stock Samsung appearance by normal shutdown and startup of my phone? I can't, everytime I tried to power on, it get's me to empty battery screen then shut off. I can't seem to charge the phone as well.
Have you tried charging the phone for a few hours while in recovery mode, and then turn the device on?
marco199609 said:
Have you tried charging the phone for a few hours while in recovery mode, and then turn the device on?
Click to expand...
Click to collapse
Thank you for your suggestion I will try that. Actually I tried to splice a USB wires and connect red/black to +/- contact for the battery and charge it for few hours, it doesn't seem to get hot, and certainly the phone still can't switch on with the battery.
Initially I thought maybe I messed up the firmware (really I only flash cwm) hence the phone's battery charge controller is not working that's why I tried external charging, but I am not too sure now.
My only hope is to get a way to verify I have enough battery power so I can flash the stock recovery in "downloading mode". I dare not flash recovery without full battery, though the download mode can be accessed while I plugin into PC's usb port.
tancb said:
Hi there,
I am new to android phone and I had an old Grand Quattro GT-I82552 to play with.
I followed the guide at xda http://forum.xda-developers.com/showthread.php?t=2494471, downloaded
- ODIN v3.07
- CWM Recovery v6.0.4.5
- Stock Recovery GT-I8552
I followed the steps and flash CWM Recovery v6.0.4.5, but on next boot it won't go to CWM recovery mode (I did removed battery first). I tried many times with other CWM from different sources and now my phone won't boot, it just show up the Samsung Logo with yellow triangles, then shutdown. It doesn't look like a loop boot, as it shutdown entirely. I can't charge the phone either.
I can still go in the usb downloading mode so I flashed the stock recovery, no luck, phone still can't boot.
Any advice is appreciated. Thank you.
EDIT: I found out that I was too careless to noticed that Volume UP is required for boot into CWM, instead as Volume DOWN. So I can boot into CWM now, however I supposed I can withhold my SuperSU install, and just boot into my stock Samsung appearance by normal shutdown and startup of my phone? I can't, everytime I tried to power on, it get's me to empty battery screen then shut off. I can't seem to charge the phone as well.
Click to expand...
Click to collapse
Don't worry your phone will charge while in recovery around 2% in 6-7 minutes. After that you can flash stock os via Odin. Next time you try to flash recovery don't check auto reboot in Odin when flashing of tar file will complete remove battery and boot to recovery. Then flash supersu
redhead77 said:
Don't worry your phone will charge while in recovery around 2% in 6-7 minutes. After that you can flash stock os via Odin. Next time you try to flash recovery don't check auto reboot in Odin when flashing of tar file will complete remove battery and boot to recovery. Then flash supersu
Click to expand...
Click to collapse
Thanks for your advice. I took both of your advice and had my phone flashed with Stock ROM and now it returned to normal with fully charged battery sign shown. My battery appears to be fine with and fully charged, the battery current probably can't be detected with my broken phone back then.
With StockROM in and fully battery, I redo the custom flashing and I am now on custom ROM! Though have some problem with the ROM (battery report not correct, no front camera..) but I am happy now the phone is back to work now.
Thank you very much.

Categories

Resources