I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
Same problem here!
Steve-Austin said:
Same problem here!
Click to expand...
Click to collapse
Also problems with speaker / ringer???
palicaj said:
Also problems with speaker / ringer???
Click to expand...
Click to collapse
Nope, just the BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Make sure ALL files in the checklist on the side are present - Got similar errors when flashing rom without preloader to a different device.
There might be some clues to pick up here: http://forum.xda-developers.com/showthread.php?t=1943442
... I'd want to start with making sure you're flashing a rom that you're certain is made for your device - and make 100% sure Preloader is included!
pr0xZen said:
Make sure ALL files in the checklist on the side are present - Got similar errors when flashing rom without preloader to a different device.
There might be some clues to pick up here: http://forum.xda-developers.com/showthread.php?t=1943442
... I'd want to start with making sure you're flashing a rom that you're certain is made for your device - and make 100% sure Preloader is included!
Click to expand...
Click to collapse
I solved my problem.
As a last chance i tried to flash my N9500 with wrong firmware from Star S5.
And miracle - phone was flashed without problems , no errors.
After that was non functional, but this allowed me to flash original n9500 firmware, and phone was functional
Rom
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
Hi ther just follow this steps:
Root
Alps N9500 rom April 19 2013
Fix GPS
After the update fix the camera with SP MDT and GPS with M44 toolbox.
Did this myself and what a great phone this is...
is bricked
rom stock no request driver display and camera update 10/05/21013
https: //hotfile.com/ dl/ 207896579/ 2cb4abe/ STAR_N9500.rar. html
open flashtool and scatter rom folder
click download
cable and battery insert
push on device
power and vol down
start flash stop power and vol down
I hope it works method
ok in my mtk 6577 9300 rom
no bricked normal procedure flashtool
sorry my bad english
S4 Clone ?
Hi! My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
NEXT UPDATE ROM STAR N9500 V1 E V2 STOCK
Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 10 11:08:37 CST 2013
v1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
RECOVERY CWM FOR VERSION LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2
for driver LCD 1-RX_499NT_598A use scatter 2 (v2)
for driver LT050ANKP019A use normal scatter
1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
https: //mega.co.nz / #!d5hUCTCJ!QaswYlltRIFdR_1XJSARSzmu7Aop86uEGxBCkUyXwUw
freedgt said:
NEXT UPDATE ROM STAR N9500 V1 E V2 STOCK
Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 10 11:08:37 CST 2013
v1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
RECOVERY CWM FOR VERSION LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2
for driver LCD 1-RX_499NT_598A use scatter 2 (v2)
for driver LT050ANKP019A use normal scatter
1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
https: //mega.co.nz / #!d5hUCTCJ!QaswYlltRIFdR_1XJSARSzmu7Aop86uEGxBCkUyXwUw
Click to expand...
Click to collapse
It not work.
My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
look the video by youtube its solution for dram failed 4032
you search at youtube dram failed 4032 star x920e, you finded.
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
ringer/speaker didnt worked
palicaj said:
Also problems with speaker / ringer???
Click to expand...
Click to collapse
i did root with motochoper and mtk6589 drivers and now have no system sound.. i have star n9500...help me
Iocean X7 Elite Brick
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully flashed the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)
I have no idea what to do next can someone help me.
n9500 woos
You guys are scaring me with the problems your having with flashing/rooting/recovery installation on the n9500. I just order one off ebay for my wife whos been a good miss' using her Optimus T and hasnt complained about it, well, to much. But I am glad that some of you have found help and or fix the problems yourself. I plan on ordering one myself but it looks like i'll have to leave it stock for a time until we got our own section on the forums which i think would help with cookin the roms and receiving help when things go a muck.
for BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
edit your scatter or scatter rom
sample
CACHE 0x2d180000<---no cpy
add
__NODL_
solve result
__NODL_CACHE 0x2d180000
sample
USRDATA 0x34f80000 <----no copy
add
__NODL_
result
__NODL_USRDATA 0x34f80000
result
__NODL_USRDATA your ex code
__NODL_CACHE you ex code
exit and save file
flash no battery requised
SP Flash Tool v3.1316.0.150
https ://hotfile.com/dl/230492941/fa4f1d1/SP_Flash_Tool_v3.1316.0.150.rar.html
Jtag it
please help i have haipai i9389 i bootlooped it so i downloaded rom from needrom and flashed it but it gives me white screen how can i fix this?
My phone is this
http://www.mixeshop.com/index.php?m...bf85a41b837&categories_id=&keyword=star+n9500
It is the 8gb version
I flashed
http://www.needrom.com/mobile/star-n9500-4/comment-page-5/#comments
and phone is dead
I get BROM_ERROR: S_FT_ENABLE_DRAM_FAIL(4032)
(EMI) Enable DRAM failed
My phone is seen as MTK USB by SP flash tool
Help. Is there anyway to fix this?
Hello!
I've got bricked Mi2 fake on MTK6577. When up rom i fogot to readback rom
This phone was bricked because I flashed wrong firmware, but it still detects as "MTK USB Port" (Com5) when I plug it in and don't press any buttons on it.
I found & dowloaded many Rom file about mi2(fake) but when i flash phone with SP flash tool it always got this error: S_DA_DRAM_NOT_SUPPORT (3004) and when I use older Sp Flash Tool versions it ends with error: S_DL_GET_DRAM_SETTINGS_FAIL (5054). Even if I flash only PRELOADER and DSP_BL blocks.
This is infomation about phone:
Chip Mediatek MTK6577 core duo 1.5Ghz
Ram: 2GB
Internal storage: 4GB
Model number: MyRom
Android version: ICS 4.0.4
If someone have one same still working. Please readback Rom and give it to me. Maybe i can save my phone.
It’s my pleasure if you can help me. I’m so sad when is brick ! wish time would go back. tks
Help with MTK6572 HDC S5 G900F Dead For FlashTool
Good for all.
I have tried to update a HDC G900F S5 MTK 6572 with flash tool and start the process went wrong and now the computer does not detect my phone; but only shows instaladriver of device goes unidentified. I need help please.
The download of the rom needrom and it is this:
G900F.V111En20140522
I have a name copies made mtk tools but I can not restore because the phone does not turn me or detects the flash tool
Hello very interesting, but I have a clone of this cell phone is 1: 1 in every way besides is resistene water, has a real screen 5.1 "Full-HD, 2 GB Ram, 16 GB ROM, Camera 13 MP (16 MP interpolated) can know more about this phone here
www notimoviles com
Good for all.
I have tried to update a HDC G900F S5 MTK 6572 with flash tool and start the process went wrong and now the computer does not detect my phone; but only shows instaladriver of device goes unidentified. I need help please.
The download of the rom needrom and it is this:
G900F.V111En20140522
I have a name copies made mtk tools but I can not restore because the phone does not turn me or detects the flash tool[/QUOTE]
Please check if you have the proper drivers installed and that no other drivers conflict with the connection. your phone should be detectable by flash tool even after full format and hardest of brickings.
Do you have backup of your rom? (I mean files like lk or uboot, system, secro, preloader, boot, etc?)
Have you made scatter file?
Was your phone "Made in Korea"? (I'm asking because if yes then we may help eachother with bricked phones)
Hey guys i use chineese clone phone.yesterday i want to insttall costom rom.after using sp flash and dowload new rom to my phone.than phone goes brick.i prepare backup before rom installation.but sp flash tooll cooldn reconize my scatter file.after downloading file flash toll give ram error.how can i solwe this problem and un brick my phone.
phone model:clone jiayu JY-GS+ (elephone p6i) but my phone is mtk 6592 p6i 6582.
phone base band is: moly.wr8.w1315.md.wg.mp.v37 i need scatter file for this baseband chip please help
the Chinese clone phone should not be flash Rom, for their system are unstable
Hello, i have some problem with SPFlashtool.
I had this tablet Lenovo A7600H ( 3g Version). While i was using it he start get's error that google service terminated and reboot itself.
After he booted up i get problem with Encrypted Unsuccesfull error. I tried to Hard Reset, but notthing.
So i tried to flash is stock rom with SPFlashTool, he flashed up only the preloader and after that i get error DRAM WRITE FAILED (3154)
I stupidly format the device, and flashed only the preloader. He flashed okay, but after that now every time i try to flash all files from the scatter file, he flash the preloader and after that i get BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069), so i thinked could be the size of the rom, but i find a RU site that have all the firmware for this tablet, tried all version of Jelly bean, Kit kat, lollipop etc, different size, start from 650 mb to 850 mb, but notthing, always this error.
So i did a memory read test, and give me the "ERROR: NAND Flash was not detected!". What can i do? Is really a firmware things, or simply the eMMC is gone and better fine a replacement? thank you in advice
Anybody think can be any solution?