Hello everyone
I have try to flash stock ROM Alcatel one touch pop c7 for unbrick. (Boot logo) But can not (My phone is Alcatel one touch pop c7 7040D ROM 4 G ram 250Mb) error occur during flash tool down load android scatter The errors masses as following
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI] Obtain DROM failed!
[HINT]: please check your load matches to your target which is to be downloaded.
On flash tool program the stcatter file auto select contain 4 file as detail 1. UBOOT 2.BOOTIMG 3.recovery and 4.Logo
What something wrong?
Thank you all
i have 7041D and same bootloop starting animation and cannot go off with power button always restart. bad its universal chipset MediaTek MT6582M and now searching working toolkit under windows for this chipset
Related
hi.I used SP Flash Tool to flash my phone with the wrong ROM and now its DEAD.It won't turn on.it won't charge and still PC detection as Mtk Usb Port.
I have another same device.i get backup of stock ROM with Mtk Droid Tool.(i know backup files work.recovery file with scatter flashed sucsesfully when i install cwm recovery on new device)
i can format whole flash with SPFT and get green circle.
then try to download,but this errors appeared.
with SP FLASH TOOL 3.1224.01 : S_DL_GET_SETTING_FAIL (5054)
with SP FLASH TOOL 3.1304.0.119 :S_DA_DRAM_NOT_SUPORT (3004)
i see this error too : booloader doesnt exist on nand flash.please download bootloader first!
i think its bootloader problem so maybe testpoint method works.problem is i dont know which one is TP and how can i use it.
cpu : mtk6517(6577)
ram:512
android :4.0.4
http://www.apanda.com.cn/a60t/
anyone.please help
Hello guys,
I'm on this great forum since years, normally i have no issue but i did something stupid with my new buyed phone an Alcatel C9 (7047)
I was playing with some roms. I bricked my device by flashing an incorrect preload.bin and i have no backups, he is recognized by the windows device manager (MTK) and i can flash a rom / files with sp flash tool: That's it.
- The Alcatel mobile upgrade tool doesn't work
- Booting with volume UP + Power doesn't work
- Flashing only a recovery.img --> it doesn't boot
Is there any user who will can make an sp flash tool backup from his Alcatel Pop C9?
Thanks for reading and answering!
Marc
can you help me with the scater file.
Hello guys, I have a HiSense U970 with the MT6589 chipset which got hard bricked a week ago. The phone is running a stock 4.2.1 JB and rooted. The problem is that whenever I try to flash anything using SP Flash Tool it shows this error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed
I am hopeful the phone isn't totally dead since it can be:
- Detected by the computer WITHOUT the battery while holding vol down
- In Device Manager, it would show MTK USB Port (ComX) under Ports when vol down is held.
This is what happens now:
- Charging does not do anything.
- Cannot boot into recovery
- Cannot be detected by MTK Droid Tools (but I think this app needs a powered up phone to be detected by its system)
- Cannot flash anything using SPFT v3.1320.0.174 and v5.1524.00
I have searched the internet for fixes and solutions but, everything that I have found leads to that error.
Here was what I had done before the problem arose.
- Installed Preloader driver
- Used the latest version of SPFT
- Formatted whole flash except bootloader as I cannot flash the cwm rom found here without formatting
- Flashed ONLY the recovery and then downloaded it.
Green circle appears and after that, it cannot boot anymore. Cannot charge. Cannot boot into recovery.
I have tried the following with no luck:
- Used SPFT v5.1524.00 and v3.1320.0.174
- Flashing only the preloader
- Flashing only the recovery
- Format whole flash
- Formatting whole flash except bootloader
- Format all + download (v5)
- Firmware upgrade + upgrade (v3)
- Using the write memory method for writing preloader
- Flashing stock preloader
- Doing a memory test
All of which goes to the error 4032.
I have also tried using different USB ports with the same results.
If it helps, I used the scatter file for MT6589 and not my own scatter file. Using my own scatter file does not do anything before I flashed the recovery rom so, I used the MT6589 scatter file instead. Also, my scatter file was different from the MT6589.
- This was the scatter file I used.
- And this is my log from MTK Droid Tools which hopefully contains the addresses for the scatter file (I accidentally replaced my own [yea i know, stupid me])
I also cannot find the same scatter file that I had created anywhere on the internet.
I am willing to supply you with anything as long as I have access to it (hoping I have the file/information you need:fingers-crossed.
I am hoping that you know or at least the very least, can guide me out of mine and others misery. Thank you. :fingers-crossed:
My phone xtouch PF73 gives me this message "decrypt error, boot failed" after i tried flashing it.
I have tried two more ROMS but with those i get the "S_NOT_ENOUGH_STORAGE(1011) error message in both SP Flash tool and WiseLink Tool"
Android version: 4.22
MTK platform : MT6572
I used
SP Flash Tool v5.1352.01
SP Flash Tool v5.1628
wise tool v4.6.0.44
How can i fix it?
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
nyado said:
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
Click to expand...
Click to collapse
Reason:
The firmware(s) you are trying to flash to your MTK device is larger than the available space allocated for the firmware in the phone’s storage space.
Possible fix ( was not tested by me ):
Click on the Format Tab
Select/tick Format whole Flash and click the Start button before connecting your device.
Once the formatting is done, go to the Download Tab and select just the Preloader file first and flash it.
After the preloader.bin has been successfully flashed to your device, tick the rest of the firmware files and flash as well.
Hi everyone,
i have a Alcatel OneTouch Pop D5 5038X, i did an update and i ended up in a bootloop update, i thought that flashing it would repair it with sp flash tool, and it
did but again in a boot loop so i choose to flash it with sp flash tool the option format all+download and it bricked the phone now i can't access the advanced mode in sp flash tool to erase the bad block mark because when i load the scatter file it disappears within seconds i tried to format it exept the boot loader still it does not turn up it has blackout why ? What procedure did i do wrong?
Details Media Tek 6852 EMMC 512mb ram 4096mb ROM
Can You Help Me With An External Tool To Fix The Brick Phone Because Sp Flash Tool Can't Do That.