Related
Hello,
Unsure if it is something new or what needs to happen. Essentially when I put the phone in recovery by holding the up button when I replace the battery and it being hooked the computer, it does go into recovery mode, but when I choose the DLL and the TOT file for an earlier version of android, it wont program and just errors.
The phone is just stock and isnt rooted or anything else. Does it need to be rooted before you can even use the tools?
Any help is appreciated. My friend's phone flashed successfully with the same files and program, but mine I got just errors with Model Information Check Error .
Thanks.
Roadwarrior is the man to ask as he guided me from 6.0 back to 4.4 then up to 5.1..it can be done..
Sent from my VS985 4G using Tapatalk
Good to know! I thought I was doomed with 6.0.
The strange thing is, the older versions of android the camera worked great. 60FPS recording was awesome. Now those options are long gone and no way to restore them. It may be possible once again if infact things can be downgraded.
I gave the guide a go listed in his signature,
It stops at 4% and loses the connection. You can see the progress bar on the phone flash a few times, but that it is, stays at 0%
Wonder if something was put new on the phone which stops a bunch of these methods to change the phone's firmware.
Are you using the newer .DLL with the 10B TOT? Coming from 100% stock 35B you need to use the new one. It can be gotten from my Android File Host link at the bottom of the first post of @annoyingduck 's stickied return to stock thread in the General section.
roirraW "edor" ehT said:
Are you using the newer .DLL with the 10B TOT? Coming from 100% stock 35B you need to use the new one. It can be gotten from my Android File Host link at the bottom of the first post of @annoyingduck 's stickied return to stock thread in the General section.
Click to expand...
Click to collapse
I will give them a try. Hoping that this particular TOT will do it. Did notice the newer DLL as I already had it, but the TOT I have it may not of liked.
Give me a moment, downloading now and see what the verdict is.
k,
Turns out the TOT I redownloaded from the link is infact the same one I had. I tried it with the new dll, and still comes back as Protocol Not Matching, there is no ks version 00000064
This phone was shipped to me not even a week ago straight from Verizon.
doffo said:
I gave the guide a go listed in his signature,
It stops at 4% and loses the connection. You can see the progress bar on the phone flash a few times, but that it is, stays at 0%
Wonder if something was put new on the phone which stops a bunch of these methods to change the phone's firmware.
Click to expand...
Click to collapse
Just checking, what guide do you mean in my signature? I don't have a link to a TOT flashing guide in there, only KDZ. For KDZs, from 100% stock 35B and higher, you can only flash 35B or higher KDZs.
doffo said:
k,
Turns out the TOT I redownloaded from the link is infact the same one I had. I tried it with the new dll, and still comes back as Protocol Not Matching, there is no ks version 00000064
This phone was shipped to me not even a week ago straight from Verizon.
Click to expand...
Click to collapse
Look at the KS Error guide I have in my sig. Just note that by me observations, 50% of the people who follow that guide it works perfectly for them and the other half of doesn't. The other half I would break down into most (45%?) were able to then flash the TOT or at least the 10B KDZ afterwards to recover, and the remaining very few were never able to downgrade in any way at all.
These are just estimates and based only on those who reported success or failure.
Just don't blame me if you permanently brick your phone. The method worked without a hitch for myself 2-3 times and for some others. I don't think those who can't get it to work are necessarily doing anything wrong.
Ahhh. I may of made a mistake and tried to use a wrong kdz file. 35B or newer you say?
It was a 10B one, so that may be my problem. The guide I meant was the first link in your signature, I used it for the KDZ stuff.
Ok, even after trying the 35B KDZ, still no luck.. Same error comes up saying Upgrade Stopped Due to an Error on the LG Flash Tool 2014.
Here are some random numbers that show up on my phone in the little grey outlined box:
633A S0.0 AS0.0 B60
S U VS985 4G O6.0 Hrev_10
VS98547A
All that I can come up with, is that something has really changed in either software/hardware which is preventing any kind of downgrading at the moment.
doffo said:
Ok, even after trying the 35B KDZ, still no luck.. Same error comes up saying Upgrade Stopped Due to an Error on the LG Flash Tool 2014.
Here are some random numbers that show up on my phone in the little grey outlined box:
633A S0.0 AS0.0 B60
S U VS985 4G O6.0 Hrev_10
VS98547A
Click to expand...
Click to collapse
LG Flash Tool 2014 normally throws one or two errors up. Look at, I believe, post #2 of that thread with my Android File Host link, it gives some examples of errors that come up but basically just ignore all errors and 99% of the time within 5-10 minutes you'll find your phone has been flashed.
You can drag error dialogs out of your way as long as you don't click any buttons inside the dialogs.
Also, check under your battery and look for a "K" at the end of the VS985 model #, like VS985K or VS985WK. @R-T-B has strong evidence that these are a newer revision that he hasn't had any luck downgrading at all via any method, has bricked his trying several times, and has modified current recovery methods so that he could at least recover at to stock 47A Marshmallow.
I do appreciate your time for helping me troubleshoot, but unfortunately it just isn't gonna happen.
I did check the sticker underneath the battery, and its actually not that far up from the one I used to have, and its just a V985W, nothing else after that.
Again, thank you very much sir!
doffo said:
I do appreciate your time for helping me troubleshoot, but unfortunately it just isn't gonna happen.
I did check the sticker underneath the battery, and its actually not that far up from the one I used to have, and its just a V985W, nothing else after that.
Again, thank you very much sir!
Click to expand...
Click to collapse
You're welcome. Sometimes a different PC makes the difference. Using the original USB cable with a USB 2.0 port that comes directly off of your PC's motherboard, and not a USB 3.x port or through a USB hub?
roirraW "edor" ehT said:
You're welcome. Sometimes a different PC makes the difference. Using the original USB cable with a USB 2.0 port that comes directly off of your PC's motherboard, and not a USB 3.x port or through a USB hub?
Click to expand...
Click to collapse
I did try to use even my media PC. Still the same error came up and the progress stays to 0 on the phone and never moves even after leaving things for 10 minutes.
I made sure it was a USB 2.0 port and not a 3.0. I will try to brainstorm more possibilities. Luckily the phone doesn't brick as it still works.
doffo said:
I did try to use even my media PC. Still the same error came up and the progress stays to 0 on the phone and never moves even after leaving things for 10 minutes.
I made sure it was a USB 2.0 port and not a 3.0. I will try to brainstorm more possibilities. Luckily the phone doesn't brick as it still works.
Click to expand...
Click to collapse
A few things I don't think I asked (forgive me if we already addressed this earlier and I forgot - helping multiple people in multiple threads I lose track of what all we discussed):
1. You do have the latest right drivers installed, correct? I always go straight to the manufacturer's website for drivers for everything. http://www.lg.com/us/support-mobile/lg-LGVS985, Software & Firmware tab. Leave the phone disconnected from the PC, then install the latest driver and reboot the PC with the phone still disconnected. Then plug the phone into the PC and put it in Download mode, and check in Windows' Device Manager to see if the "LGE..." device shows up in the Port section.
Every time you plug a USB device into a new/different USB port (and/or have installed different/newer drivers, or I've found the first time you do this after each time you flash a KDZ or TOT because the PC sees it as a "new" device), it can take Windows 5-10 minutes to load the driver you previously installed, so if it doesn't show up right away, wait up to 10 minutes and if it doesn't show up, you've got something else to solve before trying to flash again. There's also a "LGE..." device that should show up in the Modem section - I think that's for flashing via KDZ, but TOT is what you want.
2. When you put your phone in Download mode, you did open WIndows' Device Manager to change the Port # for the "LGE..." device listed in the Port section to change it to Port # 41, right? Even if it says "In Use", I've found that it's usually still okay. After changing the port # I would go ahead and leave the phone connected while in Download mode and reboot the PC, and then try flashing the TOT.
3. When in the TOT flashing software, once you click the final button to actually flash, it's normal to need to temporarily unplug the cable from the phone, wait five seconds and then plug it back in, and that's when the TOT actually starts flashing (with a slight hesitation long enough for the PC to recognize the phone is plugged back in).
Thanks again for the troubleshooting tips,
I did make sure I downloaded the latest drivers, and let them install. Everything does show up correctly in the device manager, and I did infact set the port to 41. The software starts but then it still has the error, and it doesnt resume. I did have to unplug and plug it in to get the software to start doing its magic, but still errors out.
Scary to think maybe they done something else to the phone that prevents it. Wonder if there is a 100% 6.0 TOT to try out to see if it will flash that instead since its 6.0 or newer?
I will try again in a few days, gonna go to my old man's to visit and enjoy the weekend. Have a good day! I will report back once I come back home to try again.
I would caution you against using the "DD" method to downgrade that is available as a "last resort" mentioned above. It can brick your phone pretty hard. Not unbrickable, but close. It seems to do this to very new phones, and yours might fit the bill. If you have a "K" in your model number under the battery compartment, you are even more likely to brick it in my experience.
Sadly, these newer devices are very difficult to downgrade, if not outright impossible.
EDIT: I need to read, lol. Sorry, you can ignore the above as you are way ahead of me.
doffo said:
Thanks again for the troubleshooting tips,
Wonder if there is a 100% 6.0 TOT to try out to see if it will flash that instead since its 6.0 or newer?
I will try again in a few days, gonna go to my old man's to visit and enjoy the weekend. Have a good day! I will report back once I come back home to try again.
Click to expand...
Click to collapse
You're welcome again! Thanks for the details about what you did try and experience. No, there's no 6.0 (46A or 47A) TOT but there is a 47A KDZ.
I am by no means all-experienced with LG but from what I have seen, there's commonly only at the most one TOT for every LG model at least that's been "made available". I don't think there was ever any official manner to get - we depend on someone to leak them, and it's usually most useful to have a TOT of an earlier rather than later release since it's often the case the earlier release can be rooted and install TWRP more easily. It's probably enough of a risk or pain for someone leaking one TOT.
In the case of my LG G Pad 8.3 VK810.4G tablet, the only TOT we have is for our 22B release, which was the first KitKat one for that device - the previous stock ROM was Jellybean. It wasn't freely available until another kind user shared it after he had bought it from a Chinese website that sells things like that for about $10 an item, and he confirmed it works - I've since used that TOT with success as well.
I knew the website advertised that TOT file but I didn't know if it was trustworthy otherwise I wouldn't probably bought it for our use earlier.
I just checked the website the other day and I did again just now, and no, they don't have any new VS985 files.
They do mysteriously sell a purported 10B_04 KDZ, which is odd. The 10B TOT is 10B_03, which was the official first stock ROM of the VS985 from the factory and can receive OTAs (so long as Verizon doesn't stop sending the earlier OTAs - that could happen). The 10B KDZ we have is actually 10B_01 and can't take OTAs although it'll try to. It must have been leaked to us and would've been a test version of what became final for the VS985.
The first OTA was from 10C_03 to 11C. I don't recall the "_##" for 11C, if we ever knew since that information is only in one or two places - the filenames of KDZs/TOTs, and sometimes on LG's website for downloading the open source portion of their stock ROMs, and we don't have an 11C KDZ and I don't recall if source code for 11C was on the website.
Have a great weekend and be safe!
Good day,
I tried the 47A 6.0 KDZ file, and that one in fact did flash over with LG Tools 2014. Least we know that the drivers and program is working. I did try the downgrade again, but still errors out and loses the connection.
Strange, now the chase is on as to why it prevents anything under 47A 6.0 MM.
You guys still help us us cellular guys anymore? ? I'm stuck in a bootloop I can factory wipe and get in to dl mode K, now my computer picks up phone just fine instantly but that's it. Uppercut an up almost worked (4%) twice but that's it Kdz flasher don't pick it up at all I've tried port 104 and just trying different ones any ideas?
amberkep75 said:
You guys still help us us cellular guys anymore? I'm stuck in a bootloop I can factory wipe and get in to dl mode K, now my computer picks up phone just fine instantly but that's it. Uppercut an up almost worked (4%) twice but that's it Kdz flasher don't pick it up at all I've tried port 104 and just trying different ones any ideas?
Click to expand...
Click to collapse
What is the error LGUP is giving you, please post a screenshot of the error you are receiving inside LGUP, also try a different KDZ file to see if that's the problem.
Look here for KDZ files :
lg-firmwares.com/lg-us992-firmwares/
it's possible your misc partition is "corrupted".. see the post here where I helped someone get out of something similar: https://forum.xda-developers.com/showpost.php?p=70446385&postcount=70
but that user could still boot into android to do those steps.. if you can't you may be stuck. if stuck your only option is to play around with different LGUP versions and DLL/UPPERCUT combos.. or hax.
Doesn't really say much I'm Windows7 please please don't tell me that is my issue lol i hate Windows7 man.... And uninstalling lg bridge solved all of my connection problems what ever that means...... B2c tool detects now but tellsme the upgrade is on bridge now im gonna try the older upgrade tool and see how this works.... Oh An kdz flash seems to be a np gp as well it seems to no recognize port or freeze with a mod testx errror...... Hmmm what predicaments we grrr into
Kdz flasher error....
Got it... Lg Bridge sucks but i got it to pick up my device finally
Hello. Has anybody any idea if its possible to downgrade the g5 from nougat to MM? I really dont like it. Im wondering if it is possible and how? KDZ file for my phone and lgup?
There is automatic update are came in few month just wait some time.
If your variant is H860 go here >> https://forum.xda-developers.com/lg-g5/how-to/guide-downgrade-to-mm-n-t3523999
bluerain28 said:
If your variant is H860 go here >> https://forum.xda-developers.com/lg-g5/how-to/guide-downgrade-to-mm-n-t3523999
Click to expand...
Click to collapse
my variant is h850, but now i got bigger problems...i tried installing a kdz, it failed and now i have no os. i downloaded a lot of kdz but none of them work..help me
same, i downloaded a kdz , rolled back with lg up , that appeared to work., but when my phone comes on and i enter my power up pin its says its incorrect , WTF!!! Tried LGUP to put nougat back on hoping it would help but LG up just crashed every single time i attempt to do anything with phone. Aint got a clue what to do now
You guys try asking autoprime about this?
Sent from my LGE LG-H830 using XDA Labs
dssherwin said:
same, i downloaded a kdz , rolled back with lg up , that appeared to work., but when my phone comes on and i enter my power up pin its says its incorrect , WTF!!! Tried LGUP to put nougat back on hoping it would help but LG up just crashed every single time i attempt to do anything with phone. Aint got a clue what to do now
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295 donwload uppercut and lgup from here. unzip the uppercut, run it, if it gives you an error that it cant find it in users...roaming bla bla, just copy uppercut in the folder the program wants and it will run fine. then after pluging your device in, open uppercut, select your kdz file and chose upgrade not forbish or fota upgrade or something. i however had the h85020a variant of the firmware. there is 10c and 10e or something. anyway, if u know thats your model just go for it as i said earlier.
Easy update using LG Bridge after backing up. Didn't need backup as update left everything ok (incl. Microsoft launcher). Now V20a-TWN-XX.
Allgood then, but struggling to notice a difference. Maybe a little quicker!
Nope for 870DS Indonesia
Cheers
RooBG said:
Easy update using LG Bridge after backing up. Didn't need backup as update left everything ok (incl. Microsoft launcher). Now V20a-TWN-XX.
Allgood then, but struggling to notice a difference. Maybe a little quicker!
Click to expand...
Click to collapse
Can we flash it on indian DS model?
Sent from my LG-H870DS using Tapatalk
Any others recived oreo ?
Now V20a-HKG-XX.
mohammadstr said:
Any others recived oreo ?
Click to expand...
Click to collapse
My H870DS from TWN (actual software version V10m-TWN-XX) shows no update OTA, but is now downloading a new update in LG Bridge.
ppp10 said:
My H870DS from TWN (actual software version V10m-TWN-XX) shows no update OTA, but is now downloading a new update in LG Bridge.
Click to expand...
Click to collapse
same for me. Only update with LG Bridge :/
H870DS SEA
Any news for H870DSU lg g6+
i need kdz can some one upload it for me?
mahmoudxcom said:
Any news for H870DSU lg g6+
Click to expand...
Click to collapse
It's out too ..
U can flash it by lgup ..
Check this one https://www.mylgphones.com/lg-g6-h8...d-oreo-8-0-update-in-hongkong-and-taiwan.html
---------- Post added at 07:20 AM ---------- Previous post was at 07:16 AM ----------
mohammadstr said:
i need kdz can some one upload it for me?
Click to expand...
Click to collapse
https://www.mylgphones.com/lg-g6-h8...d-oreo-8-0-update-in-hongkong-and-taiwan.html
not working at all. website doesnt give any link, and it seems like its a paid service
They could add V30 quad dac extra feature on our G6.?
sagor1 said:
They could add V30 quad dac extra feature on our G6.
Click to expand...
Click to collapse
See...if they add features from V30 no one will buy V30 they dont add them beacause of they want sell V30 product 1.5x price for that features without them V30 is no more than G6 only different bitween them is snapdragon 835 ...821 and some feauters
mohammadstr said:
See...if they add features from V30 no one will buy V30 they dont add them beacause of they want sell V30 product 1.5x price for that features without them V30 is no more than G6 only different bitween them is snapdragon 835 ...821 and some feauters
Click to expand...
Click to collapse
Same thing goes for s7 edge & s8.
But Samsung add every software features from s8 to s7 edge on oreo.
They even frequently update their built in apps.
sanzharis said:
not working at all. website doesnt give any link, and it seems like its a paid service
Click to expand...
Click to collapse
In this site site you can not only see any update to H870DS, as well as to download the installation package:
https://lg-firmwares.com/lg-h870ds-firmwares/
Updated mine a while ago. So far so good!
H870DS HKG-XX v20a
No ota, via LG Bridge
Updated my H870DS-TWN a few days ago, clean install via LG bridge.
No problems and nothing really extraordinary, except maybe the ability to hide the nav keys, which is less useful than I used to think. When hidden, you have to make one extra move to bring them back. Using a third party gesture control app solves the problem.
Has anyone noticed any change in battery performance or idle standby drain since updating their H870DS to Oreo? Additionally, has anyone found any problems or issues on this model since updating? I also have Taiwan version and want to check that the update is stable before I pull the trigger on it.
Guys, need help !!!
I have tried to install SEA oreo version on Indian phone via LGUP... Flash was successful (100%) but it got stuck on LG Logo..
Procedure followed for H870DS (IND)
1. Downloaded SEA Oreo KDZ File (H870DS20a_00_OPEN_SG_DS_OP_0518.kdz)
2. Installed LGUP... Made new Common folder inside C/Prog file/LG/Model
3. Extracted DLL file from KDZ & renamed it LGUP_Common.dll and kept in Common folder
4. Entered in download mode
5. Opened LGUP.. selected KDZ and Upgrade..
6. Boom.. 100% completed.. it has shown that phone is rebooting..
7. But then it got stuck on LG Screen
I cant access recovery now
I can open Hard Reset option (Vol down+Power) only.. Made hard reset but no use
I cant enter in download mode
I dont know if it is charging or not
It is not even switching off by pressing power button for long time
Pl help me...
swasha123 said:
Guys, need help !!!
I have tried to install SEA oreo version on Indian phone via LGUP... Flash was successful (100%) but it got stuck on LG Logo..
Procedure followed for H870DS (IND)
1. Downloaded SEA Oreo KDZ File (H870DS20a_00_OPEN_SG_DS_OP_0518.kdz)
2. Installed LGUP... Made new Common folder inside C/Prog file/LG/Model
3. Extracted DLL file from KDZ & renamed it LGUP_Common.dll and kept in Common folder
4. Entered in download mode
5. Opened LGUP.. selected KDZ and Upgrade..
6. Boom.. 100% completed.. it has shown that phone is rebooting..
7. But then it got stuck on LG Screen
I cant access recovery now
I can open Hard Reset option (Vol down+Power) only.. Made hard reset but no use
I cant enter in download mode
I dont know if it is charging or not
It is not even switching off by pressing power button for long time
Pl help me...
Click to expand...
Click to collapse
I had the same issue while using (with lg up and uc) Singapore rom on my indian lg DS last night and managed to recover successfully.
I made it to switch to download mode immediately after resetting while in stuck welcome screen.
Steps.
1. Keep pressing power + volume d to reboot.
2. Immediately press volume up while the usb is inserted and your official lg bridge running in your laptop and set to flash recovery mode.
3. LG bridge should recognise and start downloading the latest firmware from server and flash on your phone.
4. You may need to do factory reset after a successful flash n reboot because it might throw exceptions after booting (mine had from the process settings).
Section 1 Covers how to install pie on H87320i.
Section 2 Covers How to rollback from H87329a to H87320I
Section 1
Download FOTA file
v29a
https://drive.google.com/file/d/1BNI2Cvuk1eX4ocx2S6_YnbqNUARgIbts/view
v30b
https://mega.nz/#!e9cQ0QTZ!vpCXt1eYUUpTo2NJ-0t8I6SiIxt6qXbTOjupsHIzB9s
LG UP
https://www.mylgphones.com/download-lg-up-software (use 1.116 non pacteched lab version)
Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Extract .zip file of LG UP
Conect phone to pc (MTP) and enable usb debugging (if don't know how search in internet)
Install LG UP after installation
Extract Upper Cut don't forget to turn off your antivirus before you extract
Run Uppercut.exe. LG UP will run
Now in you will see some buttons select FOTA
A little bit lower you will see File Path and under it you will see probably an .up file, press on it after that press on 3 dots that just apear and find Update file you download (.up)
Before pressing start unlock your phone and stay with display turned on
Now, the last press start, after like 30s-1m on display should apear FOTA Upgrade and after should turn off and start upgrading.
At the end it will bootloop like a minute, it is normal, after that it will start and finish the update
Congrats! You got the Pie?
NOTE:
LG G6 USB drivers must b installed
If you have Lg bridge Install, it might interfere while flashing using Lg UP
Section 2
How to roll back from pie
check post below
https://forum.xda-developers.com/showpost.php?p=80464669&postcount=46
Credits:
f.h7 for rollback tutorial
v30b link by umaga2012
Some tutorial points by vaniok56 (Reddit)
harib12 said:
Download FOTA file
https://drive.google.com/file/d/1BNI2Cvuk1eX4ocx2S6_YnbqNUARgIbts/view
LG UP
https://www.mylgphones.com/download-lg-up-software (use 1.116 non pacteched lab version)
Uppercut
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Extract .zip file of LG UP
Conect phone to pc (MTP) and enable usb debugging (if don't know how search in internet)
Install LG UP after installation
Extract Upper Cut don't forget to turn off your antivirus before you extract
Run Uppercut.exe. LG UP will run
Now in you will see some buttons select FOTA
A little bit lower you will see File Path and under it you will see probably an .up file, press on it after that press on 3 dots that just apear and find Update file you download (.up)
Before pressing start unlock your phone and stay with display turned on
Now, the last press start, after like 30s-1m on display should apear FOTA Upgrade and after should turn off and start upgrading.
At the end it will bootloop like a minute, it is normal, after that it will start and finish the update
Congrats! You got the Pie?
NOTE:
LG G6 USB drivers must b installed
If you have Lg bridge Install, it might interfere while flashing using Lg UP
Some tutorial points by vaniok56 (Reddit)
Click to expand...
Click to collapse
Thanks for the tutorial...will this still keep all settings etc from oreo?
Matt
it took a lot longer than 1mn to finish that bootloop thing, you gave me a scare LMAO
after like 10mn or so the phone is up and running
thanks
matthew33 said:
Thanks for the tutorial...will this still keep all settings etc from oreo?
Matt
Click to expand...
Click to collapse
yes
KyleKlarkson said:
it took a lot longer than 1mn to finish that bootloop thing, you gave me a scare LMAO
after like 10mn or so the phone is up and running
thanks
Click to expand...
Click to collapse
Good for u
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Leonidas87 said:
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Click to expand...
Click to collapse
Here you go:
https://www.youtube.com/watch?v=OaCdtRz8k-g
Matt
I have already tried to upgrade this beta version a few times, however, I always have an SPC error at the beginning of the process (c.a. 4%). I searched around xda and found out that this error is attributed to "a wrong version" - but this should be impossible as I am using H873.
Leonidas87 said:
I keep getting an error saying mtp service not running after clicking the start button to initiate the upgrade.
Click to expand...
Click to collapse
Mostly Occurs when you have LG Bridge. I also got that error uninstalling LG bridge resolved it.
DVD-XDA said:
I have already tried to upgrade this beta version a few times, however, I always have an SPC error at the beginning of the process (c.a. 4%). I searched around xda and found out that this error is attributed to "a wrong version" - but this should be impossible as I am using H873.
Click to expand...
Click to collapse
You should be using H87320i in order to update. Please make sure you have correct drivers and you are using LGUP version I provided. In order to update your phone should be on the home screen and sometime Lg bridge also cause trouble
I have H871 that has been converted to H873 by installing the Canadian Oreo ROM. Is it possible for me to upgrade to pie using this tutorial?
I've never installed lg bridge.
I'm wondering if it only works with specific carriers. If I click firmware update the phone reboots and trying to do a firmware update just to see.
No matter what I get the mtp error when trying install this firmware.
I'm in Canada
H7320i software version.
Is it possible to install on h87320c?
I am using H87320i, flashed using LGUP+Uppercut few months ago. I uninstalled LG bridge and tried to use new version of LGUP + a newer LGUP_common.dll, however, always have an error : 0x2000 open port error.
This seems to be related to the LGUP_common.dll, but I already tried to use few different files (versions) downloaded from different sources, the error is still there. (Note that driver is working fine as I can access my phone using PC/laptop).
@harib12: can you please upload the dll file you used?
umaga2012 said:
I have H871 that has been converted to H873 by installing the Canadian Oreo ROM. Is it possible for me to upgrade to pie using this tutorial?
Click to expand...
Click to collapse
If you are already using H873 stock rom then it should be fine however, I will not take responsibility for your action. Compatibility mainly depends on hardware similarity.
DVD-XDA said:
I am using H87320i, flashed using LGUP+Uppercut few months ago. I uninstalled LG bridge and tried to use new version of LGUP + a newer LGUP_common.dll, however, always have an error : 0x2000 open port error.
This seems to be related to the LGUP_common.dll, but I already tried to use few different files (versions) downloaded from different sources, the error is still there. (Note that driver is working fine as I can access my phone using PC/laptop).
@harib12: can you please upload the dll file you used?
Click to expand...
Click to collapse
I am not using any common dll
LeeTG3 said:
Is it possible to install on h87320c?
Click to expand...
Click to collapse
It should be didn't try but it is FOTA. An OTA requires a sequence. However, as you are pushing this using LG UP maybe you have some luck. But I suggest flashing H8732oi KDZ.
Leonidas87 said:
I've never installed lg bridge.
I'm wondering if it only works with specific carriers. If I click firmware update the phone reboots and trying to do a firmware update just to see.
No matter what I get the mtp error when trying install this firmware.
I'm in Canada
H7320i software version.
Click to expand...
Click to collapse
If You're following this tutorial your phone should show a FOTA screen then it should boot. It is an open FOTA and not restricted to carriers. and are you using the links i have given? do you install any Common dll?. If yes remove the common dll as your using upper cut.
I use this tutorial and LG UP tell me a message that have a problem with dll.
Can you help me.
Enviado desde mi LG-H870 mediante Tapatalk
yoyodiaz said:
I use this tutorial and LG UP tell me a message that have a problem with dll.
Can you help me.
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
You didn't replace the model folder and LGUP in C drive properly. Don't use the folder you downloaded to start the program.