Related
So, I already had some issues with this device and they've been pretty similar, in a way that the problem always starts with random reboots when the power button is pressed. About two weeks ago I took it to a technician, because all sorts of connectivity (3G/Wi-fi/Bluetooth) simply stopped working, after yet another reboot. About 3 days ago I got it back and it was working fine except for the fact that the initial boot Motorola logo (The green one before the other logo animations) wasn't showing up. He told me it was fine because it was only an aesthetic problem because he couldn't find that image for my device's resolution.
This morning when i was going to work i picked up my XT1025 Moto E to check for messages and it suddenly restarted. So when I turn it back on, not only the animations did not pop up, but after some time all i get is a black screen, no UI whatsover, all I can do is turn off/restart the phone. At random times when I turn on the screen, it's content shows up but I can't click anything, and then an error message pops up saying that ''system has stopped responding''. I've tried many things to fix it, but nothing has worked so far.
What i've tried:
-Wiping cache partition did not work
-Factory resetting did not work either
-Unlocking bootloader (but apparently it was unlocked already)
-Flashing a custom recovery did not work for some reason...
These last two were on the ''All-In-One Guide'' by neo.ank and honestly I have no idea what i should do to fix this problem - I was thinking about reinstalling the stock ROM but i'd rather ask here first for you guys suggestions... (like i said, complete newb here).
Sorry for the long post and bad english, hopefully someone can help me out on this.
Kaio Oliveira said:
So, I already had some issues with this device and they've been pretty similar, in a way that the problem always starts with random reboots when the power button is pressed. About two weeks ago I took it to a technician, because all sorts of connectivity (3G/Wi-fi/Bluetooth) simply stopped working, after yet another reboot. About 3 days ago I got it back and it was working fine except for the fact that the initial boot Motorola logo (The green one before the other logo animations) wasn't showing up. He told me it was fine because it was only an aesthetic problem because he couldn't find that image for my device's resolution.
This morning when i was going to work i picked up my XT1025 Moto E to check for messages and it suddenly restarted. So when I turn it back on, not only the animations did not pop up, but after some time all i get is a black screen, no UI whatsover, all I can do is turn off/restart the phone. At random times when I turn on the screen, it's content shows up but I can't click anything, and then an error message pops up saying that ''system has stopped responding''. I've tried many things to fix it, but nothing has worked so far.
What i've tried:
-Wiping cache partition did not work
-Factory resetting did not work either
-Unlocking bootloader (but apparently it was unlocked already)
-Flashing a custom recovery did not work for some reason...
These last two were on the ''All-In-One Guide'' by neo.ank and honestly I have no idea what i should do to fix this problem - I was thinking about reinstalling the stock ROM but i'd rather ask here first for you guys suggestions... (like i said, complete newb here).
Sorry for the long post and bad english, hopefully someone can help me out on this.
Click to expand...
Click to collapse
You Should Flash Custom Roms.....
shyvam said:
You Should Flash Custom Roms.....
Click to expand...
Click to collapse
Hey man, thanks for the reply. How would this solve the problem, exactly? (I don't want o sound like a douche , i'd just like an explanation for information purposes - i'd be very thankful for some links ).
Are U on stock rom?
GNVM said:
Are U on stock rom?
Click to expand...
Click to collapse
I think it's currently using lollipop 5.1.
If u want to get back to stock 5.1 then flash stock rom. Then download the firmware from below link .
http://www.androidfilehost.com/?fid=24052804347783250
and download the batch file
https://www.androidfilehost.com/?fid=24269982087018369
1. Boot ur phone in fastboot mode then.
2. Extract the firmware and batch file on same folder and click on the batch file.
3. Click on the Fashtool batch file.
GNVM said:
If u want to get back to stock 5.1 then flash stock rom. Then download the firmware from below link .
http://www.androidfilehost.com/?fid=24052804347783250
and download the batch file
https://www.androidfilehost.com/?fid=24269982087018369
1. Boot ur phone in fastboot mode then.
2. Extract the firmware and batch file on same folder and click on the batch file.
3. Click on the Fashtool batch file.
Click to expand...
Click to collapse
Worked like a charm. Thanks a lot, man. ^_^
Hi gang!
I have a Moto E 2nd Generation here that was having some issues, browser crashing, slow downs, overheating issues due to multiple apps running, etc. So I decided to log into TWRP and attempt to do a factory reset. After this factory reset was done now I attempt to log into fastboot, which gives me the options of start, restart, factory, etc. I am just receiving a boot loop and nothing more. The steps to get this corrected is a bit jumbled and confusing, I must admit. I have installed ADB on my computer in hopes that this will be straightforward. I have downloaded some system images which I thought would help the process, negative. So if someone could help me this would be greatly appreciated.
- John
CheapStudent
cheapstudent said:
Hi gang!
I have a Moto E 2nd Generation here that was having some issues, browser crashing, slow downs, overheating issues due to multiple apps running, etc. So I decided to log into TWRP and attempt to do a factory reset. After this factory reset was done now I attempt to log into fastboot, which gives me the options of start, restart, factory, etc. I am just receiving a boot loop and nothing more. The steps to get this corrected is a bit jumbled and confusing, I must admit. I have installed ADB on my computer in hopes that this will be straightforward. I have downloaded some system images which I thought would help the process, negative. So if someone could help me this would be greatly appreciated.
- John
CheapStudent
Click to expand...
Click to collapse
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
testerexp345 said:
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
Click to expand...
Click to collapse
Hello testerexp345,
Thank you for the reply and the assistance, I am not sure if TWRP is installed anymore as I can't get passed the bootscreen on the phone. I hold down the volume down and power button to get the options of factory reset, shut down, restart, etc. However all these options lead back to the boot screen looping over. The ROM that I had installed on the phone was from an online seller that paired the phone with a SIM card that allowed unlimited data service, which was great for my business since I am out much of the week traveling. Any insight would help, as when it comes to flashing devices and cell phones... let's just say I am a newbie still
John C.
cheapstudent said:
Hello testerexp345,
Thank you for the reply and the assistance, I am not sure if TWRP is installed anymore as I can't get passed the bootscreen on the phone. I hold down the volume down and power button to get the options of factory reset, shut down, restart, etc. However all these options lead back to the boot screen looping over. The ROM that I had installed on the phone was from an online seller that paired the phone with a SIM card that allowed unlimited data service, which was great for my business since I am out much of the week traveling. Any insight would help, as when it comes to flashing devices and cell phones... let's just say I am a newbie still
John C.
Click to expand...
Click to collapse
To boot in bootloader while you stuck on bootlogo
Press and hold power button and volume button , and when screen goes off, quickly release power button only . don't release volume down button . now you will boot in bootloader
hamxa266 said:
To boot in bootloader while you stuck on bootlogo
Press and hold power button and volume button , and when screen goes off, quickly release power button only . don't release volume down button . now you will boot in bootloader
Click to expand...
Click to collapse
Hello hamxa266, okay I was able to get into the bootloader. All the options I choose restart the phone and put it back it back into a bootloop. I am not very familiar when it comes to using ADB.
John C.
cheapstudent said:
Hello hamxa266, okay I was able to get into the bootloader. All the options I choose restart the phone and put it back it back into a bootloop. I am not very familiar when it comes to using ADB.
John C.
Click to expand...
Click to collapse
I guess now you need to flash stock frimware using fastboot. if you are not familiar with then go and get familiar with it . It is not too hard just read few posts and thats it ..
If you need any help i am here!
Hi, I have the same issue, but I can't get it into recovery, but... Can I use "fastboot boot recovery.img"? for go into recovery for a factory reset and solve it, or I need to do something more, I have the same Moto, surnia with the bootloader locked, please I need help
testerexp345 said:
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
Click to expand...
Click to collapse
Can u provide link for latest TWRP...??
mkranthikmr said:
Can u provide link for latest TWRP...??
Click to expand...
Click to collapse
This is the link for official twrp website
http://twrp.me/motorola/motorolamotoelte.html
Or you could use squid's twrp from here:
https://forum.xda-developers.com/mo.../twrp-squid-twrp-recovery-moto-e-lte-t3137649
shreyas_123 said:
This is the link for official twrp website
http://twrp.me/motorola/motorolamotoelte.html
Or you could use squid's twrp from here:
https://forum.xda-developers.com/mo.../twrp-squid-twrp-recovery-moto-e-lte-t3137649
Click to expand...
Click to collapse
Thank you bro... Got it already...:good:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
arnavde said:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
Click to expand...
Click to collapse
If you have an SD Card installed, try removing the SD card and then booting the phone.
If that works... then I bet you have a Samsung 128GB MicroSD card???? (if not, maybe another brand 128GB card?)
It seems that there is something in the 7.1.1 boot sequence for the Moto Z's that is hanging during the mount of the SD Card when it is a Samsung 128GB card. Removal of the SD allows a successful boot up.
Once boot up is complete, you should be able to insert the SD card (without rebooting the phone) and the phone will see the SD card and the "missing SD" notification will go away and the phone will function as it always has. It seems that unless Motorola/Lenovo release a patch for this issue, that your only options are 1) remove SD during every reboot, or 2) purchase a different SD card (Motorola seems to recommend SanDisk).
No there is no SD card. The phone is stuck on bootloader.
I had the same issue, stuck on bootloader and error saying recovery could not be read. I rebooted a few times and it eventually went away. Problem is that now my phone acts REALLY weird. And the Software Assistant does NOTHING to help out. It doesn't detect the phone in regular mode and in fastboot, it says everything is fine and doesn't let me restore.
I have a feeling the OTA had a problem installing and a clean slate is the only way to fix it. The only issue is that I can't find a copy of an XT1560-02 ROM anywhere, only other variants.
I had the same issue after update. Recovery could not be validated. I removed the SD card and boom perfect boot. I just hope the issue gets patched soon, would hate to have to carry that Lil key around for if I need a reboot to remove SD card before boot
Same issue. But instead of removing sd card. Just go into recovery mode and wipe cache.
Works
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
I did id, but not luck
maumarti2k said:
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
Click to expand...
Click to collapse
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
acalapone said:
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
Click to expand...
Click to collapse
Maybe you could provide more information. Have you been on Stock 7.1.1 and tried to unlock your bootloader without allowing Oem Unlocking in developer options? What is the current state of your device, means are you able to get into recovery mode?
7.1.1 Original Stock - Not Allowed OEM Unlocking
Everything was great, but a week ago the cellphone it restarted itself, and never back: It's stuck in bootloop.
I get it with Android 6.0, and i was upgrading via Ota until 1th July, which that means it's 7.1.1 Rom Stock
Cause i wanted have my cellphone pure, i didnt touch anything(I didn't want loose my warranty), so i'm never check to allow "oem unlocking"
Now, warranty doesn't help me because i bought it in Italia, and im living in Argentina now, and they said taht they have Local Warranty.
So, i tried to solved it by my self... I did it with my old phones but they were cheap, so i think is it that why i never have ear about Reset Software Factory Protection.
Brief:
Original Stock 7.1.1
Yes, i tried unlock BL without Allow OEM Unlocking
Yes, i can get in BootLoader and in fastboot without problem
Thank You very much
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume up) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
I did it.
bullfinch110 said:
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume down) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
Click to expand...
Click to collapse
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
acalapone said:
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
Click to expand...
Click to collapse
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
bullfinch110 said:
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
Click to expand...
Click to collapse
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
acalapone said:
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
Click to expand...
Click to collapse
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
@acalapone i have edited my post above
bullfinch110 said:
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
Click to expand...
Click to collapse
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
acalapone said:
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
Click to expand...
Click to collapse
You cannot go back to 6.x after updating the bootloader to 7.x
lollyjay said:
You cannot go back to 6.x after updating the bootloader to 7.x
Click to expand...
Click to collapse
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
acalapone said:
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
Click to expand...
Click to collapse
There is still no RETEU 7.0 available, thats why you have to flash the RETBR.
Try again to flash the RETBR NPL25..firmware with RSD. If you'll get the same failed error message, here is
PLAN B:
Copy the flashall.xml file and rename it to flashallcopy.xml.
Open the copied file with a text editor and delete the 2 lines with "gpt" and "bootloader" in it. Save it and close the copy. With this the RSD program will skip those two commands. Click the 3 dots and add the flashallcopy.xml file to RSD. Click Start.
If that doesn't work, we have to run Plan C
Good luck
First sorry, i'm french.
So I've installed AIO Theme Expander package for substratum. It worked fine then I decide to uninstall it. It's now very bad.
My phone is on a bootloop. Seeing the Lineage OS booting animation for infinity. I try Power + Volume UP, nothing, just bootloop of lineage; same with Volume DOWN.
So I try to let the phone in bootloop to test adb or fastboot on my computer, nothing, no devices detected.
What can I do?
LG G4 - Lineage OS 14.1 latest
reset and reflash os
EnderRaider said:
First sorry, i'm french.
So I've installed AIO Theme Expander package for substratum. It worked fine then I decide to uninstall it. It's now very bad.
My phone is on a bootloop. Seeing the Lineage OS booting animation for infinity. I try Power + Volume UP, nothing, just bootloop of lineage; same with Volume DOWN.
So I try to let the phone in bootloop to test adb or fastboot on my computer, nothing, no devices detected.
What can I do?
LG G4 - Lineage OS 14.1 latest
Click to expand...
Click to collapse
First of all you need to do a hard reset of your phone. if your recovery is working then flash a new rom and then a new kernel.
secondly if there is no recovery then connect your phone to pc and flash one via odin. note : if odin does not detect your phone, you need to drain your battery to 0% then connect it to pc then odin should detect it and flash the rom and bootimage asap.
at last if nothing works, you have 2 options : service centre method or manual method
1. go to service centre and send the phone to repair. they can fix such problems easily even if your phone is rooted because this happened with me a long time ago when my samsung phone got bootlooped and it was rooted with warranty void. But the service centre fixed it for me for free and no objection.
2.MANUAL METHOD : DO AT YOUR OWN RISK!
FOR THIS YOU NEED TO BE GOOD AT HARDWARE.
GO TO GOOGLE AND SEARCH RESET PHONE HARDWARE AND YOU WILL GET THE ANSWER
thanks and i hope this helps you.
news
THEHACKER609 said:
First of all you need to do a hard reset of your phone. if your recovery is working then flash a new rom and then a new kernel.
Click to expand...
Click to collapse
So I try flashing a .kdz then my lineage os with twrp... And it worked ! BUT no torch lamp (idk the english name), no sensors and others glitches appears on my phone since. Maybe have I installed the wrong .kdz?
https://forum.xda-developers.com/g4...tock-firmware-to-stock-kdz-t3107848?nocache=1
I installed the europe open h81510d but on my LGUP it's this:
H81510C STANDBY
Maybe I need to install h81510c? But the problem is which kdz choose, my phone is from amazon so idk the country (europe or france i guess)
EnderRaider said:
So I try flashing a .kdz then my lineage os with twrp... And it worked ! BUT no torch lamp (idk the english name), no sensors and others glitches appears on my phone since. Maybe have I installed the wrong .kdz?
https://forum.xda-developers.com/g4...tock-firmware-to-stock-kdz-t3107848?nocache=1
I installed the europe open h81510d but on my LGUP it's this:
H81510C STANDBY
Maybe I need to install h81510c? But the problem is which kdz choose, my phone is from amazon so idk the country (europe or france i guess)
Click to expand...
Click to collapse
Probably choose the europe one. Amazon shipments are from europe. For other glitches, just install gapps from google.
As of the H81510D, you should install the one which is on your phone else you will end up with major problems.
Which one?
THEHACKER609 said:
Probably choose the europe one. Amazon shipments are from europe. For other glitches, just install gapps from google.
As of the H81510D, you should install the one which is on your phone else you will end up with major problems.
Click to expand...
Click to collapse
Europe H81520C_00_1218.kdz
H81510C_00_2.kdz
France H81520g_00_0720.kdz
EnderRaider said:
Europe H81520C_00_1218.kdz
H81510C_00_2.kdz
France H81520g_00_0720.kdz
Click to expand...
Click to collapse
Go for the 1st one. That should work pretty fine.
Here is TWRP 3.2.1 build for Project Tango K1 ATAP.
Download
gdrive: twrp-3.2.1-yellowstone.img
mailru: twrp-3.2.1-yellowstone.img
Sources
device tree: https://github.com/HighwayStar/android_device_google_yellowstone
kernel: https://github.com/HighwayStar/android_kernel_google_yellowstone
How to install
enable USB debugging in stock ROM and run command: adb reboot bootloader
Unlock bootloader using command: fastboot oem unlock (it will wipe all your user data!)
With unlocked bootloader boot into stock rom and enable USB debugging again. Reboot to bootloader: adb reboot bootloader
Flash recovery image: fastboot flash recovery twrp-3.2.1-yellowstone.img
To boot into recovery you could run adb reboot recovery after booting to stock ROM or use Vol+ Vol- Power combo to boot in bootloader menu and select Recovery using volume keys and confirm by pressing Power.
XDA:DevDB Information
[RECOVERY][TWRP] Project Tango K1 ATAP TWRP 3.2.1, Tool/Utility for the Nvidia Shield Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_kernel_google_yellowstone
Version Information
Status: Testing
Created 2019-02-19
Last Updated 2019-02-19
Any ROMs available for yellowstone? I can see one in use on the LineageOS Statistics page (search 14.1-20190208-UNOFFICIAL-yellowstone)
But I can't find it on xda.
I didn't get it to boot, but I was in a hurry and hopefully just forgot something simple. If anyone gets it working please post details. Hopefully this is legit:
Edit: link removed. Per the developer: "please don't use them. They're experimental, and won't be booting for some time... you run the chance of bricking. Definitely stay away until I make some form of announcement otherwise."
@highwaystar_ru gave me this ROM that is working splendidly on my yellowstone: https://cloud.mail.ru/public/Hmco/XryszodXm
From @highwaystar_ru:
It uses binary files from stock yellowstone and has some issues:
cameras doesnt work, video playback sometimes has artifacts, all cpu
cores always up (without it video playback lags), accelerometer sensor
inverted.
Me and couple of lineage devs working hard to port shieldtablet kernel
to yellowstone, it will allow to use shield binary files and resolve
most problems, but progress are really slow (but there is some
progress lately).
Click to expand...
Click to collapse
shiznit1618 said:
@highwaystar_ru gave me this ROM that is working splendidly on my yellowstone: https://cloud.mail.ru/public/Hmco/XryszodXm
From @highwaystar_ru:
Click to expand...
Click to collapse
Thanks! This is working very well so far for the limited testing I've done. I'll have to take it into the field and see how that goes .
Tried out that ROM , it's pretty good outside of issues listed bluetooth is non functional.
Mobile data , text, wifi etc working.
Back to life
Thanks to highwaystar_ru I was able to install twrp and then lineage 14.1 with Open GApps pico.
I hope that somebody will be able to bring this to 15.1
Please keep up your effort, Hurray I can use my tango again , at least some of it, would be great that bluetooth and cameras working and good luck with the shield software i'll be looking for it . Thanks alot
thanks
worked for me. . with all the restrictions added.. but still brought a perfectly fine tablet from no usage to home automation dashboard device
Great work thank you,
Also i tested that Rom in the thread and it works well despite the reversed sensor, bluetooth (and i report USB on dock non fuctional with rom)
has there been any progress on the Rom at all? thanks.
Any progress with this rom?
Also @shiznit1618 and @highwaystar_ru where are you guys collaborating? If this is a telegram, discord, or other chat group. I'd love to get in and talk, maybe help a bit. I'm currently on arcore devs slack chat but there isn't much activity in their #yellowstone channel.
https://arcore.slack.com
ShapeShifter499 said:
Any progress with this rom?
Also @shiznit1618 and @highwaystar_ru where are you guys collaborating? If this is a telegram, discord, or other chat group. I'd love to get in and talk, maybe help a bit. I'm currently on arcore devs slack chat but there isn't much activity in their #yellowstone channel.
https://arcore.slack.com
Click to expand...
Click to collapse
There does seem to be some active development on GitHub (within the last week) and I also found (from same developer on GitHub) a newer rom based on 15.1 although I couldn't get it to boot, seems I need to update TWRP, but trying to update TWRP it tells me the recovery partition exceeded size, so I assume I have to update boot as well (which I didn't do). i'd suggest checking on GitHub and contacting that developer.
https://github.com/TegraDevelopment/android_device_google_yellowstone
Bazathoth said:
There does seem to be some active development on GitHub (within the last week) and I also found (from same developer on GitHub) a newer rom based on 15.1 although I couldn't get it to boot, seems I need to update TWRP, but trying to update TWRP it tells me the recovery partition exceeded size, so I assume I have to update boot as well (which I didn't do). i'd suggest checking on GitHub and contacting that developer.
https://github.com/TegraDevelopment/android_device_google_yellowstone
Click to expand...
Click to collapse
Where did you find the 15.1 build?
ShapeShifter499 said:
Where did you find the 15.1 build?
Click to expand...
Click to collapse
http://updater.ods.ninja/yellowstone
This is the same project I had mentioned in post #3. I took the link down because it wasnt ready at the time and I've been waiting for the dev to let us know when its working. See post #3 for a quote from him...
But... there is a build from Feb 12. Please let us know how it goes if you try it. :good:
xaxxelous said:
http://updater.ods.ninja/yellowstone
This is the same project I had mentioned in post #3. I took the link down because it wasnt ready at the time and I've been waiting for the dev to let us know when its working. See post #3 for a quote from him...
But... there is a build from Feb 12. Please let us know how it goes if you try it. :good:
Click to expand...
Click to collapse
I have a new issue, my tablet is rebooting constantly. It will crash to a "red battery icon" and then boot back up to the lockscreen. I'm not sure if the battery in my unit is bad or if the battery calibration is messed up. Do you have any ideas what to do here?
My device was restored to stock btw.
ShapeShifter499 said:
I have a new issue, my tablet is rebooting constantly. It will crash to a "red battery icon" and then boot back up to the lockscreen. I'm not sure if the battery in my unit is bad or if the battery calibration is messed up. Do you have any ideas what to do here?
My device was restored to stock btw.
Click to expand...
Click to collapse
Will it stay on while plugged into the dock? Or usb even?
xaxxelous said:
Will it stay on while plugged into the dock? Or usb even?
Click to expand...
Click to collapse
I never got a hold of a original dock, I didn't check to see if keeping it on charge helped.
ShapeShifter499 said:
I never got a hold of a original dock, I didn't check to see if keeping it on charge helped.
Click to expand...
Click to collapse
Did you flash that build from Feb 12?
How did you return to stock? A TWRP backup or do you have original firmware?
Does it keep bootlooping by itself without any input from you or will it sit stable at the lockscreen? Can you keep it turned off?
Depending on the answers to those questions, the first thing I would do is turn it off and plug it in. Let it sit until fully charged. It takes a long time via USB, and even longer if it is on. Not that this is a solution, just troubleshooting...
xaxxelous said:
Did you flash that build from Feb 12?
How did you return to stock? A TWRP backup or do you have original firmware?
Does it keep bootlooping by itself without any input from you or will it sit stable at the lockscreen? Can you keep it turned off?
Depending on the answers to those questions, the first thing I would do is turn it off and plug it in. Let it sit until fully charged. It takes a long time via USB, and even longer if it is on. Not that this is a solution, just troubleshooting...
Click to expand...
Click to collapse
It reboots without me touching. The main OS has a full battery icon but the reboot flashes the red battery icon before booting. I flashed using NVFlash a copy of the stock OS I got from the arcore stack. Someone gave me their APX package that NVFlash requires.
That file is here: https://drive.google.com/file/d/1dv5ZPsczOAp6l9WOgVlbCTuBnbW71L8p
Conversation starts here: https://arcore.slack.com/archives/C68HHETL7/p1549401595001100
Main quote of interest from that chat:
Greg Willard (r3pwn) 1:20 PM
Around 3 mins left on the upload
1:24
What I did in the interest of still letting a device turn on if someone didn't get the chance to back up their persist/persistbk, was I took mine, and scrubbed the mac addresses and serial number. So the macs are set to 00:11:22:33:44:55:66, and the serial num is 012345678.
1:25
... aaaand here you go https://drive.google.com/file/d/1dv5ZPsczOAp6l9WOgVlbCTuBnbW71L8p
Click to expand...
Click to collapse
ShapeShifter499 said:
It reboots without me touching. The main OS has a full battery icon but the reboot flashes the red battery icon before booting. I flashed using NVFlash a copy of the stock OS I got from the arcore stack. Someone gave me their APX package that NVFlash requires.
That file is here: https://drive.google.com/file/d/1dv5ZPsczOAp6l9WOgVlbCTuBnbW71L8p
Conversation starts here: https://arcore.slack.com/archives/C68HHETL7/p1549401595001100
Main quote of interest from that chat:
Click to expand...
Click to collapse
I can't see that convo without an account. Have you asked for help there?
Until I get home I can't really look at that apx. Maybe install TWRP and the ROM from post #4 or a TWRP backup? Without knowing what that apx flashed its hard to say. The ROM from highwaystar_ru (mostly) works. Might at least get you out of the bootloop.
And just to be clear, you did not flash that 15.1 build, right? What were you running before flashing the apx?
Unless TWRP and that LOS 14.1 ROM or a TWRP backup help we've gone off topic for this thread...