I bought x822 with 5.8.0.18s and the fingerprint was good. When i updated on indian 19s fingerprint stpped working.
What can i do?
Same problem was with me i tried Wiping all data...and flash .and it worked
Leo7D said:
Same problem was with me i tried Wiping all data...and flash .and it worked
Click to expand...
Click to collapse
i didnt root the the phone and no TWRP installed cause i dont want to get rooted fom business reasons ... Can i do this with stock recovery? how to wipe all data from stock recovery? do you have x822 model?
X820,x821,x822 all are same.
Ya you can try this on stock recovery. Take your media /data. Backup
Power + volume up to go in recovery
Select clear all data...untick software update .
The see if it's working
I did it and still nothing
Update to latest EUI version indian 19s or 5.9.21s china rom
Leo7D said:
Update to latest EUI version indian 19s or 5.9.21s china rom
Click to expand...
Click to collapse
i have already installed Latest Indian 5.8.0.19s i also tried chinese 5.8.0.18s chinesse and still fingerprint is dead
Then contact lecco service center if you have spare mobile because that will take more than month as per user complaints on le community
OP, did you try factory reset?
Sent from my Le X820 using Tapatalk
Amowagou said:
OP, did you try factory reset?
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
i did it no solution for me its not a hardware problem cause fingerprint was working
babis_gold said:
i did it no solution for me its not a hardware problem cause fingerprint was working
Click to expand...
Click to collapse
Probably there were some glitches when updating to Indian ROM, try reinstalling the ROM in Recovery.
Amowagou said:
Probably there were some glitches when updating to Indian ROM, try reinstalling the ROM in Recovery.
Click to expand...
Click to collapse
I reinstalled it 3 times !!! (x822 has different encryption maybe) ...
just check whether your device is encrypted if not encryt the storage and try. it seems only with device encryption our fingerprint sensor is working
This problem is only for x822 version ??? Anybody else with different version has the same issue ???
Hardware problem if device is manufactured in June-July 2016 !
Related
Hello people, i just bought RN3 (Indian version with FPC sensor), i unlocked unofficially by flashing MIUI 7.1 and installed AICP 11 MM just after that, do i had to flash CM13 Firmware first?
Everything works fine but sometimes screen glitches and phone freezes so i have to force reboot it.
So should i now flash CM firmware? if yes with which TWRP? i'm using official twrp 3.0.2-2, reply soon....
Edit- solved
Flash CM firmware if your ROM is CM based at all, of course. If not, look for something in the ROM thread.
Dev.Katalyst said:
Hello people, i just bought RN3 (Indian version with FPC sensor), i unlocked unofficially by flashing MIUI 7.1 and installed AICP 11 MM just after that, do i had to flash CM13 Firmware first?
Everything works fine but sometimes screen glitches and phone freezes so i have to force reboot it.
So should i now flash CM firmware? if yes with which TWRP? i'm using official twrp 3.0.2-2, reply soon....
Click to expand...
Click to collapse
Personally I always flash it anyway. Fixes a few bugs like settings FC etc.
Dev.Katalyst said:
Hello people, i just bought RN3 (Indian version with FPC sensor), i unlocked unofficially by flashing MIUI 7.1 and installed AICP 11 MM just after that, do i had to flash CM13 Firmware first?
Everything works fine but sometimes screen glitches and phone freezes so i have to force reboot it.
So should i now flash CM firmware? if yes with which TWRP? i'm using official twrp 3.0.2-2, reply soon....
Click to expand...
Click to collapse
Dev.Katalyst,
any news with your glitches issue ?
did you successed solving it?
iTaisHi said:
Dev.Katalyst,
any news with your glitches issue ?
did you successed solving it?
Click to expand...
Click to collapse
yes, that was live display bug in old kernels. fixed after a week of this post.
Hello, I recently purchase the max 2 x820 from Geekbuying with ROM5.8.015S (stable) installed in it which has a lot of bug. I would like to flash my phone with the cuocuo2 method but I do not know which version of twrp and of firmware to choose. Because in the links there is several. Do I Have to take the last versions dating from october 15th?? Thank you for clearing me up on these points because I am afraid of making bad things.
Sorry for my English and thanks in advance
Best regards.
There is a official twrp recovery for it, once you flash that you can flash cuoco92's 18s rom
xterminater07 said:
There is a official twrp recovery for it, once you flash that you can flash cuoco92's 18s rom
Click to expand...
Click to collapse
Can you please send me a link with the good recovery and cuoco92 latest ROM. Thanks in advance
https://www.androidfilehost.com/?fid=385035244224385135 Cuoco92 18s rom
http://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611 Official TWRP Recovery
Thank you so much for your help
kadiatou94120 said:
Hello, I recently purchase the max 2 x820 from Geekbuying with ROM5.8.015S (stable) installed in it which has a lot of bug. I would like to flash my phone with the cuocuo2 method but I do not know which version of twrp and of firmware to choose. Because in the links there is several. Do I Have to take the last versions dating from october 15th?? Thank you for clearing me up on these points because I am afraid of making bad things.
Sorry for my English and thanks in advance
Best regards.
Click to expand...
Click to collapse
Unless you want system language other than English or Chinese , just stick with the official Chinese firmware and intall Google apps yourself . Everything works fine and you get OTA firmware updates.
Sent from my Le X822 using Tapatalk
Amowagou said:
Unless you want system language other than English or Chinese , just stick with the official Chinese firmware and intall Google apps yourself . Everything works fine and you get OTA firmware updates.
Click to expand...
Click to collapse
Ok but if I do this can I put the custom Rom after that cause I really want French language.
xterminater07 said:
https://www.androidfilehost.com/?fid=385035244224385135 Cuoco92 18s rom
http://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611 Official TWRP Recovery
Click to expand...
Click to collapse
Hello thank you for your help I flash my phone last night everything works fine but I dont know why I got Chinese application like letv view... and how can I delete them.
Hi, I ordered the x822 from China and it has a Chinese ROM which is 5.8.018s(Stable), but I want to switch to the Indian ROM with 19s as I've noticed in the forums, that it is the most stable ROM so far.
Is it possible to flash that ROM without root or twrp? I don't want to root my phone, right now!
I am very new to this and any help is much appreciated.
I had another question. The ROM that is currently installed doesn't seem to have the System Updater. Is it because it is not an Official ROM? Thank you.
Heregoom1933 said:
Hi, I ordered the x822 from China and it has a Chinese ROM which is 5.8.018s(Stable), but I want to switch to the Indian ROM with 19s as I've noticed in the forums, that it is the most stable ROM so far.
Is it possible to flash that ROM without root or twrp? I don't want to root my phone, right now!
I am very new to this and any help is much appreciated.
I had another question. The ROM that is currently installed doesn't seem to have the System Updater. Is it because it is not an Official ROM? Thank you.
Click to expand...
Click to collapse
You can install the 21s is stock but beta and is the best stock rom right now and you can install it by the updater
Download the rom you want ( Indian 19s in your case).
1- Put it in the main directory.
2- Rename it to update.zip
3- Enter recovery mode. (Shut down your phone. Press volume up+power up button together. You will go into recovery mode).
4- Press update and wait.
You don't need root, and charge your phone before doing this.
venezolano69 said:
You can install the 21s is stock but beta and is the best stock rom right now and you can install it by the updater
Click to expand...
Click to collapse
But 21s is not Indian ROM, right?
Sones1989 said:
But 21s is not Indian ROM, right?
Click to expand...
Click to collapse
It's not crypted and no Google play I think it's Chinese
venezolano69 said:
It's not crypted and no Google play I think it's Chinese
Click to expand...
Click to collapse
Encrypted ROM's are better though, right?
Sones1989 said:
Encrypted ROM's are better though, right?
Click to expand...
Click to collapse
For who changes rom frequently it's not good because you lost data everytime you change rom
anameeeen said:
Download the rom you want ( Indian 19s in your case).
1- Put it in the main directory.
2- Rename it to update.zip
3- Enter recovery mode. (Shut down your phone. Press volume up+power up button together. You will go into recovery mode).
4- Press update and wait.
You don't need root, and charge your phone before doing this.
Click to expand...
Click to collapse
Is it really this easy? Even if you're moving from Chinese ROM to Indian ROM?
Sones1989 said:
Is it really this easy? Even if you're moving from Chinese ROM to Indian ROM?
Click to expand...
Click to collapse
As long as it is official rom you can do that.
anameeeen said:
As long as it is official rom you can do that.
Click to expand...
Click to collapse
How to know if it's official ROM or not? I bought it from a Chinese website and they usually install a multilanguage ROM (often known as supplier ROM). Is there are way to differentiate? Thank you for the help.
What is your current rom? Put a picture.
Go to settings - about phone then take a screenshot
Download official indian rom from link below
http://forum.le.com/in/eui_detail.html?euiid=209
Log in with leecco accnt and download rom and install as mentioned by @anameeeen
hi everyone, i have researched on this for hours and idk what to do.. I am using KIW-AL10 chinese version. It recently got updates to MM with EMUI 4.0.1. i installed TWRP. made the full backup wiped all the partitions and installed cm 13 but it is stuck in bootloop. It reaches the CM bootup screen but reboots. i reflashed my stock MM and tried again but no use. The stock firmware is B430. I even tried flashing the boot.img again but no use. Please guide me in how can i install custom roms. I tried cm 14.1 also but same results. Thanks for the help
sublimeace said:
hi everyone, i have researched on this for hours and idk what to do.. I am using KIW-AL10 chinese version. It recently got updates to MM with EMUI 4.0.1. i installed TWRP. made the full backup wiped all the partitions and installed cm 13 but it is stuck in bootloop. It reaches the CM bootup screen but reboots. i reflashed my stock MM and tried again but no use. The stock firmware is B430. I even tried flashing the boot.img again but no use. Please guide me in how can i install custom roms. I tried cm 14.1 also but same results. Thanks for the help
Click to expand...
Click to collapse
Downgrade to B350 or until B310. That will fix it.
Sent from my honor 5X using XDA Labs
adriansticoid said:
Downgrade to B350 or until B310. That will fix it.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
430 also causes bootloop?? i thought it was b360 and b370, only for indian variant!
adriansticoid said:
Downgrade to B350 or until B310. That will fix it.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
i am on chinese variant.. KIW-AL10. Can i downgrade to those?? are those marshmallow firmwares? Thanks for the reply
some help guys, please!
sublimeace said:
some help guys, please!
Click to expand...
Click to collapse
downgrade to much previous firmware and try flashing custom roms.. will work
thilak devraj said:
downgrade to much previous firmware and try flashing custom roms.. will work
Click to expand...
Click to collapse
I reverted back to lolipop and now going to try and flash B422 for AL-10. I'll post back if that works
sublimeace said:
I reverted back to lolipop and now going to try and flash B422 for AL-10. I'll post back if that works
Click to expand...
Click to collapse
i would hightly suggest you flash something like B3xx..
thilak devraj said:
i would hightly suggest you flash something like B3xx..
Click to expand...
Click to collapse
aren't they for L21 and L22?
sublimeace said:
aren't they for L21 and L22?
Click to expand...
Click to collapse
there aren't for your model??
what is the beginning marshmallow firmware for your model??
thilak devraj said:
there aren't for your model??
what is the beginning marshmallow firmware for your model??
Click to expand...
Click to collapse
noooooooo! my model if KIW-AL10!! that's why i am having so much problem with it. and the update i got was b430. but i can find B422 and B427.. so i think i'll revert to lolipop and try flashing those.
sublimeace said:
noooooooo! my model if KIW-AL10!! that's why i am having so much problem with it. and the update i got was b430. but i can find B422 and B427.. so i think i'll revert to lolipop and try flashing those.
Click to expand...
Click to collapse
then try b422
thilak devraj said:
then try b422
Click to expand...
Click to collapse
hey, so i am running lolipop B254. and when i try to update to MM B419, it fails at about 15 to 20%. i read on some chinese firmware that it needs to be on B419. Its an OTA update and i have made a dload folder in my sd card and copied to update.zip file. but it fails everytime. what could be the problem?
sublimeace said:
hey, so i am running lolipop B254. and when i try to update to MM B419, it fails at about 15 to 20%. i read on some chinese firmware that it needs to be on B419. Its an OTA update and i have made a dload folder in my sd card and copied to update.zip file. but it fails everytime. what could be the problem?
Click to expand...
Click to collapse
I don't know, this is a.strange issue.. May be 419 is not the beginning build of marshmallow
In case somebody in this thread is interested in a solution, I managed to install LineageOS on a Honor 5X KIW-AL10 with the latest stock firmware KIW-AL10C92B437.
Once you have unlocked the bootloader, flash TWRP with adb, you need to flash Lineage OS & a zip that will fix the loop (see: https://jira.lineageos.org/browse/BUGBASH-222?attachmentViewMode=list). I used Fix_boot(422+).zip. Voilà!
sidgboy said:
In case somebody in this thread is interested in a solution, I managed to install LineageOS on a Honor 5X KIW-AL10 with the latest stock firmware KIW-AL10C92B437.
Once you have unlocked the bootloader, flash TWRP with adb, you need to flash Lineage OS & a zip that will fix the loop (see: https://jira.lineageos.org/browse/BUGBASH-222?attachmentViewMode=list). I used Fix_boot(422+).zip. Voilà!
Click to expand...
Click to collapse
woohoo thx im looking for this
and now my honor can boot properly
i've flashed 2 custom roms but always bootloop so many thx
Put a new stock ROM of your previous version
sublimeace said:
hi everyone, i have researched on this for hours and idk what to do.. I am using KIW-AL10 chinese version. It recently got updates to MM with EMUI 4.0.1. i installed TWRP. made the full backup wiped all the partitions and installed cm 13 but it is stuck in bootloop. It reaches the CM bootup screen but reboots. i reflashed my stock MM and tried again but no use. The stock firmware is B430. I even tried flashing the boot.img again but no use. Please guide me in how can i install custom roms. I tried cm 14.1 also but same results. Thanks for the help
Click to expand...
Click to collapse
I have suffered this same issue previously,
Put a new stock ROM of your previous version you had , download it from huawei website in sdcard and put that sdcard in your phone. And follow the procedure to how to install a stock ROM
Murtaza Latiwala said:
I have suffered this same issue previously,
Put a new stock ROM of your previous version you had , download it from huawei website in sdcard and put that sdcard in your phone. And follow the procedure to how to install a stock ROM
Click to expand...
Click to collapse
I made this guide after being stuck on AL10 with no info anywhere so I solved the problem, good luck
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
I've replaced my touchscreen for a new one that i´ve bought in aliexpress and when I flash LOS 14.1 it doesn´t work. The rom boot and everything seems to be ok in the process but touchscreen doesn´t work. I've restore a backup to miui and it's ok. Latest firmware ok.
Any ideas?
tatun_g said:
I've replaced my touchscreen for a new one that i´ve bought in aliexpress and when I flash LOS 14.1 it doesn´t work. The rom boot and everything seems to be ok in the process but touchscreen doesn´t work. I've restore a backup to miui and it's ok. Latest firmware ok.
Any ideas?
Click to expand...
Click to collapse
Try flashing a custom kernel (like Radon or Agni) after flashing LOS. That might help
Noter2017 said:
Try flashing a custom kernel (like Radon or Agni) after flashing LOS. That might help
Click to expand...
Click to collapse
Thanks! I´ve flashed ElementalX and it worked.
I am also having this problems. In Miui that's why I am using NOS can anyone give me solution
bhaveshji said:
I am also having this problems. In Miui that's why I am using NOS can anyone give me solution
Click to expand...
Click to collapse
There are custom kernels that work on MIUI. Take a look at the development section
I have seen this since yesterday. Why screen replacement does this on stock kernel and how does custom kernels fix hardware issue?
I faced the same problem after screen replacement from AliExpress. Touch works on MiUI but not on official LOS. Flashing Agni kernel over LineageOS solved the issue for me.