Xiaomi Redmi 3S 32GB/3GB ROM bricked/ screen not working - Xiaomi Redmi 3 Questions & Answers

Hello, as a lot of us I tried to install new rom and my device was completely bricked, no edl, no detection, no fastboot, so I open device, remove cover and made conenction between pins as I found on internet, it was very similliar to reset bios on pc motherboard.. device was detected, I have installed ROM for my device, I tried developer and stable too, but still the same. My screen is still blank, in Windows I see my device as Redmi 3S, I can switch my device to fastmode, but still wit black screen. Have you any idea what is wrong?
I think, that problem is with screen, not with software. I have disconnected and connect back battery for few times, but no contact with screen.
Do you know, where is connector for screen?
Regard,
Jiri

Related

I am having a problem, Huawei honor 3c

I am having a problem with my huawei honor 3c, I think it is bricked.
In brief, my phone won't start up no matter what I do, the display is completely shut off, the pc doesn't recognize the phone and it only flashes a red led for one second as soon as it's connected to the pc (without the battery), then nothing more happens.
I reinstalled the drivers and changed the usb cable but it's still not working.
it all happened when I was flashing a ROM using the sp flashtool, it was working fine but as soon as I disconnected the phone and reconnected it back to the computer, it didn't work anymore.
may someone please help?
same here but I was trying to install kitkat with emiu 2.3 Chinese firmware to my international version
now it's dead
did u find anything, pls

[HELP] Dead Usb Data connection (kenzo)

Hi guys, i'm Claudio. I'm new to this xda community and before i start i want to thank you in advice for your help and i want to sorry for my bad english ^^.
Two days ago my Redmi note 3 pro had a random reboot during charging and it stops booting up, with AC adapter it shows only a blinking red light. I tried everything and finally manage to boot into fastboot mode by removing the case and disconnect battery pins and reconnect them. Now every time my phone accidentaly or not reboots with the AC adapter attached, it dies and i need to open case again and disconnect battery pins.
P.S. I can charge my phone without any problems.
This i not the only problem i have now:
- OTG does not work anymore, system do not detects any kind of usb device, Pendrive, Mouse, Keyboards, Gamepads etc.
- In Settings USB options are not present anymore (MTP for exemple), tried any kind of programs and drivers.
- I cannot disable VoLTE.
- My PC shows "Device not recognized" when i connect my phone. It acts like my PC did not manage to read phone firmware and don't know what kind of device i connect.
Strage thing is that i manage to manually install Marshall Bootloader ADB drivers and now i can flash roms with fastboot method.
As you can see is not a problem caused by damaged data usb pins because i can flash ROM's, Recovery mods etc. It may be a problem caused by a damaged partition, maybe a locked one witch i cannot flash using Miflash tool but here guys i need your help because i don't have any experience with nandroid backups, partitions.
Actual configuration:
Miui Stable 7.3.7.0 (also tried miui 8 global developer, nothing changes)
Radon 2.3 kernel (even with stock kernel nothing changes)
Bootloader officially unlocked
I will give you any kind of information you want, and i will try everything. No problem if i lose my data. Thank you guys! :good:

Xiaomi Redmi 3 Hardbricked?

Hi, so I have encountered a rather big issue with my xiaomi redmi 3 pro.
I believe I have flashed wrong (corrupted ? ) ROM, now I have a really annoying situation.
So, I flashed " ido_xhdpi_images_V7.2.6.0.LHPCNDB_20160129.0000.14_5.1_cn " in MiFlash, took a bit long time (nearly 15 minutes), afterwards it was completed, I disconnected my phone, and *BOOM* since then, black.
Current situation is this: When I connect my phone via USB, my phone gets recognized in device manager as
"Qualcomm HS-USB QDLoader 9008 (COM#)", also it gets recognized in MiFlash, but can't get it to work in fastboot, and it is not recognized as adb device. So, throughout 3 days now, I tried nearly EVERYTHING I have found on forums. The only thing I have not done is to take the back cover off and disconnect battery ( as I have seen on forums), tried with deep flash cable, all possible combinations of buttons and all. If the phone is connected to PC, when I press whatever combination of buttons on phone I just get Windows sound for connecting an USB device.
So today, when I connected it, red LED light was blinking, I have no idea what that was, so I plugged it into the wall to charge for 10mins, and now when I connect it, it's gone again, all black, no response whatsoever.
So, when I connect it to MiFlash and try to flash any ROM, tried nearly everyone I found, I get the same message; "Unspecified error 0x80004005; End Transfer packet id0, status 9" if I refresh MiFlash without disconnecting, and press flash again I get "Reached the end of the file. (0x80070026; Receiving hello packet) "
Things maybe to mention: I am running a 64 bit Windows 10, and my bootlocker is locked.
So I am wondering, if there is any possible way to solve this or it's time for a new phone?
alchzor said:
Hi, so I have encountered a rather big issue with my xiaomi redmi 3 pro.
I believe I have flashed wrong (corrupted ? ) ROM, now I have a really annoying situation.
So, I flashed " ido_xhdpi_images_V7.2.6.0.LHPCNDB_20160129.0000.14_5.1_cn " in MiFlash, took a bit long time (nearly 15 minutes), afterwards it was completed, I disconnected my phone, and *BOOM* since then, black.
Current situation is this: When I connect my phone via USB, my phone gets recognized in device manager as
"Qualcomm HS-USB QDLoader 9008 (COM#)", also it gets recognized in MiFlash, but can't get it to work in fastboot, and it is not recognized as adb device. So, throughout 3 days now, I tried nearly EVERYTHING I have found on forums. The only thing I have not done is to take the back cover off and disconnect battery ( as I have seen on forums), tried with deep flash cable, all possible combinations of buttons and all. If the phone is connected to PC, when I press whatever combination of buttons on phone I just get Windows sound for connecting an USB device.
So today, when I connected it, red LED light was blinking, I have no idea what that was, so I plugged it into the wall to charge for 10mins, and now when I connect it, it's gone again, all black, no response whatsoever.
So, when I connect it to MiFlash and try to flash any ROM, tried nearly everyone I found, I get the same message; "Unspecified error 0x80004005; End Transfer packet id0, status 9" if I refresh MiFlash without disconnecting, and press flash again I get "Reached the end of the file. (0x80070026; Receiving hello packet) "
Things maybe to mention: I am running a 64 bit Windows 10, and my bootlocker is locked.
So I am wondering, if there is any possible way to solve this or it's time for a new phone?
Click to expand...
Click to collapse
Hello,
I will move your thread to the correct section so that the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.
Hi, sorry to hear that happened to you. I suggest you to post this on Xiaomi reddit page, so more people can help you. Here is the link:
https://www.reddit.com/r/Xiaomi/

[HELP] Screen not working, device unrecognised by pc.

Hi everyone,
After charging for a while as always my Note 4 (MTK) powered off and, at boot, started to show the classic Mi logo "fading" in a vertical gray stripes screen, so I can't actually use the phone.
It has locked bootloader and it has no recovery.
Fastboot is working (and the screens works normally in it), so I tried to flash something with SP hoping this is only a strange sw issue.
The problem is: Windows shows my device as an Unrecognized USB Controller, even though I got all drivers (except for MTP, which won't install) installed on my pc, so SP tool won't start downloading.
Any solution?
Thanks in advance.

Problem loading rom. No fastboot detected and twrp reboots

Hello:
I have Xiaomi Mi10 5g with xiaomi.eu that works fine but I wanted to put an original stock rom. The pc does not recognize it in fastboot, it only happens with this phone, we have three more xiaomi in the family and the pc recognizes all of them, the custom twrp restarts and does not start, it does not let me reset to factory, that is, I cannot do nothing to change the rom.
Can someone tell me what can I do?
Thanks. Regards.
Finally, the problem was dirt in the charging connector.
I cleaned it very well with isopropyl alcohol and the PC recognized the phone.
I was able to load the stock rom and close the bootloader by fastboot.
Regards.

Categories

Resources