Please help.
My le max2 did bootloop.
How to flash rom with fast boot .
Or how to copy rom from computer to internal storage for flash with twrp .tq
فرستاده شده از P6-U06ِ من با Tapatalk
download twrp
boot from twrp
upload zip file to /sdcard
install rom
reboot
commands:
for boot TWRP:
Code:
fastboot boot d:\leeco\twrp.img
where d:\leeco is folder with twrp.img (twrp.img is twrp)
sending file
Code:
adb push d:\leeco\LE_X2_X820-CN-FN-FEXCNFN5902012151S-5.9.020S.zip /sdcard
after sending you get OK, before that communicate don't install zip file!
Install rom - click install and select /sdcard/LE_X2_X820-CN-FN-FEXCNFN5902012151S-5.9.020S.zip
mohsenshakib39 said:
Please help.
My le max2 did bootloop.
How to flash rom with fast boot .
Or how to copy rom from computer to internal storage for flash with twrp .tq
فرستاده شده از P6-U06ِ من با Tapatalk
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=457095661767124632
back to stock
cr3pt said:
download twrp
boot from twrp
upload zip file to /sdcard
install rom
reboot
commands:
for boot TWRP:
Code:
fastboot boot d:\leeco\twrp.img
where d:\leeco is folder with twrp.img (twrp.img is twrp)
sending file
Code:
adb push d:\leeco\LE_X2_X820-CN-FN-FEXCNFN5902012151S-5.9.020S.zip /sdcard
after sending you get OK, before that communicate don't install zip file!
Install rom - click install and select /sdcard/LE_X2_X820-CN-FN-FEXCNFN5902012151S-5.9.020S.zip
Click to expand...
Click to collapse
ineed to go back to stock, right now i have TWRP installed and a custom ROM i need to know how to go back to the original rom without any custom recovery installed, could you help me please, i have a leeco le max 2 x820, please details the procedures.
thanks
You don't read what I wrote. Read again and do all what I wrote!
cr3pt said:
You don't read what I wrote. Read again and do all what I wrote![/QUOTE
Try t
---------- Post added at 01:31 PM ---------- Previous post was at 01:29 PM ----------
mohsenshakib39 said:
Please help.
My le max2 did bootloop.
How to flash rom with fast boot .
Or how to copy rom from computer to internal storage for flash with twrp .tq
فرستاده شده از P6-U06ِ من با Tapatalk
Click to expand...
Click to collapse
Try this guide it saved my cellphone from a boot loop and go back to stock
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
Click to expand...
Click to collapse
I need to flash my divce
Related
Hi Guys
Finally Its time for us to celebrate. Lenovo A6000 with Lolipop is here
Download Official Stock Rom Lolipop From Here
Installation Method
1.Download the zip
2.Place it in root of your external sd card
3.Boot into stock recovery
4.Select apply update from sdcard
5.point to the zip file
6.Wait till the installation get finished.
Download And Enjoy
Thank Me if i Helped You
Is it just me or everyone has low internal space available after upgrading to lollipop. I have only 2GB usable space, nearly 11GB is used by the system.
EDIT: I factory reset and now all space is back. Lollipop runs great!
Will installation failed as before status 14
failure!!!Were you able to boot into lollipop rom?
How can I root this?
Sent from my Lenovo A6000 using XDA Free mobile app
no need to root the device to install the Lollipop update.
Only we need the CWM and install the CWM recovery image through ADB flash boot.
Just backup the system and install the new update.
IT ends with a status 14 error and shows the installation aborted .... message.
No problem just reboot the device to enjoy the new update.
Muppuri said:
no need to root the device to install the Lollipop update.
Only we need the CWM and install the CWM recovery image through ADB flash boot.
Just backup the system and install the new update.
IT ends with a status 14 error and shows the installation aborted .... message.
No problem just reboot the device to enjoy the new update.
Click to expand...
Click to collapse
Yeah, i have already installed it. I wanted to know how to root it. Kingoroot is not working.
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
---------- Post added at 02:03 PM ---------- Previous post was at 02:00 PM ----------
rahulsnair said:
Hi Guys
Finally Its time for us to celebrate. Lenovo A6000 with Lolipop is here
Download Official Stock Rom Lolipop From Here
Installation Method
1.Download the zip
2.Place it in root of your external sd card
3.Boot into stock recovery
4.Select apply update from sdcard
5.point to the zip file
6.Wait till the installation get finished.
Download And Enjoy
Thank Me if i Helped You
Click to expand...
Click to collapse
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
To revert into STOCK ROM
To revert back to stock do the following:
1) install the ADB tools into your p.c.,
2) copy the recovery.img (download it from mediafire) into the installed ADB folder (C:\Program Files (x86)\Minimal ADB) ,
3) copy the stock/Updated ROM into the SD card of your device,
4) install the lenovo drivers if not installed already and connect your device to the pc and run the following commands at the "C:\Program Files (x86)\Minimal ADB " folder
i) adb devices (to check the device is connected or not)
ii) adb reboot Bootloader (boots the device into Bootloader / Fastboot Mode),
iii) fastboot boot recovery.img , ( to install the CWM into the device, but it lasts for next reboot only),
iv) within the CWM run the commands,
wipe dalwick cache ,
wipe/factory reset including the 'system' ,
v) now choose the option "install zip " from the CWM and choose " install from external SD card" and select the STOCK Rom / LOLLIPOP Rom and press yes to install the ROM,
vi) after getting the "installation finished " message, now reboot the device to get the installed ROM.:
cool:
---------- Post added at 03:05 PM ---------- Previous post was at 02:57 PM ----------
To root the device , just copy the root-SuperSU.xxx.zip file into the SD card and update the zip file within the CWM environment and roboot the device.
Hi Rahul,
I've downloaded the new OTA update for Lenovo A6000. Where do I find it..? I've searched on lenovoota folder, but it is empty..!!
gladiator9120 said:
File not found on your Google Drive. Can you please re-upload it.
Click to expand...
Click to collapse
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Sent from my GT-I9300I using Tapatalk
Hello, i want to install this official s58 rom. Im with lenovo a6000 one sim and dont have official update for my phone. I want to install this , but pls tell me this rom have any bugs ? how much free space , any lag ?
Sparco21 said:
Hello, i want to install this official s58 rom. Im with lenovo a6000 one sim and dont have official update for my phone. I want to install this , but pls tell me this rom have any bugs ? how much free space , any lag ?
Click to expand...
Click to collapse
It is much better than any other update 1- extract in your sd card
2- install your country.Ota.zip
3-install system.zip
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Sent from my GT-I9300I using Tapatalk
Thank you man.
Ahmad Tawfik said:
It is much better than any other update 1- extract in your sd card
2- install your country.Ota.zip
3-install system.zip
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S058_151030_KK2L_WC67.zip
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
Can I directly flash the Zip using Stock Recovery or Do I have to flash Country OTA zip & System Zip separate?
no flash separately or installation will be aported
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
no flash separately or installation will be aported
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
Sure..Thanks
Hello, when i install system.zip and mycountry.ota, Should I flash boot.img from system.zip or not ? only install system.zip and .ota and reboot ?
Sparco21 said:
Hello, when i install system.zip and mycountry.ota, Should I flash boot.img from system.zip or not ? only install system.zip and .ota and reboot ?
Click to expand...
Click to collapse
when you install system.zip the boot.img is installed too
no need
Sent from my GT-I9300I using Tapatalk
Sparco21 said:
Hello, when i install system.zip and mycountry.ota, Should I flash boot.img from system.zip or not ? only install system.zip and .ota and reboot ?
Click to expand...
Click to collapse
Install country ota zip & system zip.. No other steps needed.. Your device will reboot by itself & get upgraded to Lollipop
Sent from my Lenovo A6000 using Tapatalk
Hi
I'm trying to install/flash twrp recovery(2.8.6) on my Micromax canvas Nitro A311 in order to flash a ROM. I'm using this guide to install twrp- http://forum.xda-developers.com/a31...-recovery-micromax-canvas-nitro-a311-t3066387 but whenever I try to reboot into recovery my phone does a normal reboot. I have tried using different apps(other than MUT) like rashr but it still does the same thing. Any help would be greatly appreciated.
robotic141 said:
Hi
I'm trying to install/flash twrp recovery(2.8.6) on my Micromax canvas Nitro A311 in order to flash a ROM. I'm using this guide to install twrp- http://forum.xda-developers.com/a31...-recovery-micromax-canvas-nitro-a311-t3066387 but whenever I try to reboot into recovery my phone does a normal reboot. I have tried using different apps(other than MUT) like rashr but it still does the same thing. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Which ROM u have currently?
Stock. This is the ROM I'm trying to flash http://forum.xda-developers.com/a310/development/rom-cynogenmod-12-1-micromax-canvas-t3282317
Sent from my Micromax A311 using XDA-Developers mobile app
Sahilsinghlodhi said:
Which ROM u have currently?
Click to expand...
Click to collapse
Stock. This is the ROM I'm trying to flash http://forum.xda-developers.com/a310...anvas-t3282317
robotic141 said:
Stock. This is the ROM I'm trying to flash http://forum.xda-developers.com/a310...anvas-t3282317
Click to expand...
Click to collapse
http://d-h.st/QxWE (twep 2.8.7) try this recovery.
Make sure file is in /sdcard0 i.e. root of internal sd and named rcovery.img
Open MUT, click on update recovery and select your img file. (Also make sure root permissions are set to grant for MUT)
And reboot from it directly.
If not successful try boot in recovery from adb and thn peompt me if you are able to boot to recovery.
---------- Post added at 05:03 PM ---------- Previous post was at 05:03 PM ----------
robotic141 said:
Stock. This is the ROM I'm trying to flash http://forum.xda-developers.com/a310...anvas-t3282317
Click to expand...
Click to collapse
http://d-h.st/QxWE (twep 2.8.7) try this recovery.
Make sure file is in /sdcard0 i.e. root of internal sd and named rcovery.img
Open MUT, click on update recovery and select your img file. (Also make sure root permissions are set to grant for MUT)
And reboot from it directly.
If not successful try boot in recovery from adb and thn peompt me if you are able to boot to recovery.
Sahilsinghlodhi said:
http://d-h.st/QxWE (twep 2.8.7) try this recovery.
Make sure file is in /sdcard0 i.e. root of internal sd and named rcovery.img
Open MUT, click on update recovery and select your img file. (Also make sure root permissions are set to grant for MUT)
And reboot from it directly.
If not successful try boot in recovery from adb and thn peompt me if you are able to boot to recovery.
---------- Post added at 05:03 PM ---------- Previous post was at 05:03 PM ----------
http://d-h.st/QxWE (twep 2.8.7) try this recovery.
Make sure file is in /sdcard0 i.e. root of internal sd and named rcovery.img
Open MUT, click on update recovery and select your img file. (Also make sure root permissions are set to grant for MUT)
And reboot from it directly.
If not successful try boot in recovery from adb and thn peompt me if you are able to boot to recovery.
Click to expand...
Click to collapse
It worked!! Thanks. So the problem was the recovery file which I downloaded
Sent from my Micromax A311 using XDA-Developers mobile app
Hello there,
I got a Kate device, which I unlocked unofficially after oficial unlock failed after 50% in September.
Now I'm running TheStrix' CM14.1 with this firmware:
http://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
But now I read, that TheStrix recommends flashing the MIUI Dev Rom, and afterwards his new 14.1 Firmware in order to run 14.1 correctly.
From what I read so far, its recommended to do the official unlock now, because it is working. And there is no chance of accidentally relocking it afterwards?
Could someone give me a hint on how to accomplish that? A short step-by-step list would be much appreciated!
I guess I would have to Flash the dev rom first, then unlock, then flash the firmware and then install CM14.1, is that right?
How do I flash the dev rom and which one is the right one?
Will my TWRP stay in place during all this or do I have to install it again? Am I using the right TWRP for all these operations?
Right now I have TWRP 3.0.0-0 cofface installed.
While TheStrix recommends using his TWRP with F2FS support. Would it be safe to flash that now?
Thank you guys so much!
The only way to do it by flashing official MIUI fastboot ROM in EDL mode via MiFlash.
Sent from my Redmi Note 3 Pro using Tapatalk
for those who want to flash custom roms without taking the time to unlock bootloader follow this steps..
1- download any miui fastboot rom
2-extract it
3- download alka twrp recovery
4-rename it recovery. img and paste it in the extracted folder thus replacing the miui recovery
5-flash using mi flash tools in EDL mode
6-now you have TWRP installed... format your phone.. and now copy the roms, mods, whatever the **** you want in your phone by pc and you can flash that
sunilband007 said:
for those who want to flash custom roms without taking the time to unlock bootloader follow this steps..
1- download any miui fastboot rom
2-extract it
3- download alka twrp recovery
4-rename it recovery. img and paste it in the extracted folder thus replacing the miui recovery
5-flash using mi flash tools in EDL mode
6-now you have TWRP installed... format your phone.. and now copy the roms, mods, whatever the **** you want in your phone by pc and you can flash that
Click to expand...
Click to collapse
Doesn't work on latest MIUI rom bro. Official recovery won't replaced.
Sent from my Redmi Note 3 Pro using Tapatalk
sunilband007 said:
for those who want to flash custom roms without taking the time to unlock bootloader follow this steps..
1- download any miui fastboot rom
2-extract it
3- download alka twrp recovery
4-rename it recovery. img and paste it in the extracted folder thus replacing the miui recovery
5-flash using mi flash tools in EDL mode
6-now you have TWRP installed... format your phone.. and now copy the roms, mods, whatever the **** you want in your phone by pc and you can flash that
Click to expand...
Click to collapse
As I said, I would like to unlock the phone once and for all. But thank you anyway!
@febry_valdy
Thank you for your reply! Could you provide a link to the correct fastboot rom? The Xiaomi website is a big riddle for me
And could you tell me what EDL Mode is?
febry_valdy said:
Doesn't work on latest MIUI rom bro. Official recovery won't replaced.
Click to expand...
Click to collapse
you are trying fastboot rom right?..
ebivan said:
As I said, I would like to unlock the phone once and for all. But thank you anyway!
@febry_valdy
Thank you for your reply! Could you provide a link to the correct fastboot rom? The Xiaomi website is a big riddle for me
And could you tell me what EDL Mode is?
Click to expand...
Click to collapse
download the zip i attached.... put phone in fastboot mode then double click edl. cmd.. the screen will go black...
then by using mi flash tool flash the miui rom with replaced recovery (i used 6.10)
also this will unlock bootloader one and for all... (until you lock it again manually)
sunilband007 said:
you are trying fastboot rom right?..
Click to expand...
Click to collapse
Yes,
Sent from my Redmi Note 3 Pro using Tapatalk
---------- Post added at 09:04 AM ---------- Previous post was at 09:03 AM ----------
@febry_valdy
Thank you for your reply! Could you provide a link to the correct fastboot rom? The Xiaomi website is a big riddle for me
And could you tell me what EDL Mode is?[/QUOTE]
Someone has uploaded edl via fastboot, there you can take a profit from it.
Sent from my Redmi Note 3 Pro using Tapatalk
febry_valdy said:
Yes,
Click to expand...
Click to collapse
i mentioned the rom i used and method above... refer to it
sunilband007 said:
i mentioned the rom i used and method above... refer to it
Click to expand...
Click to collapse
you mentioned "download any miui fastboot rom" that's all bro
febry_valdy said:
you mentioned "download any miui fastboot rom" that's all bro
Click to expand...
Click to collapse
it should work with any fastboot miui.... im just telling which one i used
sunilband007 said:
it should work with any fastboot miui.... im just telling which one i used
Click to expand...
Click to collapse
Ooh, u used 6.10 version. I just realized it. Hahha.
Sent from my Redmi Note 3 Pro using Tapatalk
Thank you all for your replies. To sum it up, I made a step-by-step list, could someone please confirm that.
1. Put phone in fastboot mode and flash official MIUI fastboot dev ROM (6.11.24) in EDL mode.
2. Unlock phone using MiUnlock
3. Install TWRP (f2fs) using fastboot
4. Install CM14 Kate firmware provided by TheStrix
5. Install CM14.1 nightly by TheStrik
6. Install Gapps
Is that about right? Can you tell me after which steps I will have to wipe? And which partitions to wipe..?
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
BraskOviedo said:
Installing this recovery will void your warranty. I am not responsible for any bricked device.
Installation:
Make sure your bootloader is unlocked
Download the recovery image from above
Reboot into fastboot
Run the following command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery recovery.img
Download link:
https://dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Does this also have pstore enabled?
infrag said:
Does this also have pstore enabled?
Click to expand...
Click to collapse
It is the latest official release, if it was on previous versions it should have it also.
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
rshahzad17 said:
For me it works at the first flash and after the reboot touch stops working, any advice ?
Im on 6/64Gb x820.
Click to expand...
Click to collapse
How did you flash it?
through TWRP? or fastboot?
xuser_ said:
How did you flash it?
through TWRP? or fastboot?
Click to expand...
Click to collapse
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
rshahzad17 said:
Through fastboot and also tried through previous TWRP with no luck, the touch doesn't seem to work for me with 3.1, I actually had Cuoco92's recovery earlier.
Click to expand...
Click to collapse
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
xuser_ said:
Oh!!!
I think Cuoco92's recovery is modified one(not sure about the modification)
I suggest to revert back to
https://eu.dl.twrp.me/x2/twrp-3.0.2-1-x2.img.html
then full wipe using above TWRP version
then try installing the latest TWRP
https://eu.dl.twrp.me/x2/twrp-3.1.0-0-x2.img.html
Click to expand...
Click to collapse
Thanks, I will try this !
I was using TWRP 3.0.2.1-x2 and I tried flashing a new ROM; After flash I'm stuck, it will boot only to recovery!
I tried flashing TWRP 3.1.0.0-x2 - same thing, can't get out of the loop - any ideas please?
Thank you!
the latest 3.1.1 is not work
通过我的 Le X821 上的 Tapatalk发言
Hi Mate
unfortunately the latest twrp doesn't work, you will need to revert to "twrp-3.1.1-0-x2"
it is working fine, you can do so on windows once all drivers installed correctly or use any Linux operating system
if you need help let me know and will write a detailed instruction how to do it on Linux as it is a lot easier than junk windows
good luck
sam
Hi guys !
I have aproblem with RMN4 (sd ) miui 8.1.15 , every time i flash TWRP i alway get freezing in MI logo and can't boot into system
any idea? please help me
Thanks !
i install this TWRP
https://forum.xda-developers.com/re...er-development/recovery-twrp-3-0-2-0-t3550061
lightcyan said:
Hi guys !
I have aproblem with RMN4 (sd ) miui 8.1.15 , every time i flash TWRP i alway get freezing in MI logo and can't boot into system
any idea? please help me
Thanks !
i install this TWRP
https://forum.xda-developers.com/re...er-development/recovery-twrp-3-0-2-0-t3550061
Click to expand...
Click to collapse
Did you tried
Fastboot boot <whatevertherecoveryname.img> once you done flashing twrp?
sachin n said:
Did you tried
Fastboot boot <whatevertherecoveryname.img> once you done flashing twrp?
Click to expand...
Click to collapse
yes : fastboot flash recovery twrp-3.1.0-0-mido.img
lightcyan said:
yes : fastboot flash recovery twrp-3.1.0-0-mido.img
Click to expand...
Click to collapse
After this command, do no reboot your phone, just keep your device connected then -
Fastboot boot <whatevertherecoveryname.img>, after this command wait few seconds, it'll boot to TWRP.
Once you get into recovery, flash lazyflasher.zip then reboot from twrp. If you won't flash lazyflasher, device wont boot.
sachin n said:
After this command, do no reboot your phone, just keep your device connected then -
Fastboot boot <whatevertherecoveryname.img>, after this command wait few seconds, it'll boot to TWRP.
Once you get into recovery, flash lazyflasher.zip then reboot from twrp. If you won't flash lazyflasher, device wont boot.
Click to expand...
Click to collapse
i did it but not work
lightcyan said:
i did it but not work
Click to expand...
Click to collapse
try this stable recovery
https://forum.xda-developers.com/re...r-development/twrp-twrp-3-1-0-0-mido-t3590814
if fails then unbrick your device from here
https://www.youtube.com/watch?v=7nzUbp732Ow
good luck
hit thumbs up if i helped you
lightcyan said:
i did it but not work
Click to expand...
Click to collapse
What rom are you on? Stable miui right?
---------- Post added at 09:17 ---------- Previous post was at 09:14 ----------
rony raj said:
try this stable recovery
https://forum.xda-developers.com/re...r-development/twrp-twrp-3-1-0-0-mido-t3590814
Click to expand...
Click to collapse
The one he's using is also stable recovery, you were just linked a themed one. Makes no sense.
Rony rai said:
if fails then unbrick your device from here
https://www.youtube.com/watch?v=7nzUbp732Ow
good luck
hit thumbs up if i helped you
Click to expand...
Click to collapse
This is ain't MTK, he's using an SD VERSION.
---------- Post added at 09:19 ---------- Previous post was at 09:17 ----------
@lightcyan, tell me what's your device's status now? Is that booting? Or looping? Or just pops Mi logo when you long press power button?
8.1.15 has problems with custom recovery. Update to 8.2.2 or 8.2.4. Then flash TWRP, Boot recovery and flash lazyflasher.
Gesendet von meinem Redmi Note 4 mit Tapatalk