Hi everyone
Be as nice as you can be this is my first post
So i tried to unlock my Xperia NEO with Omnius by changeing the certificate and using the paperclip trick test point etc but now my phone is dead nothing will read it atall apart from Omnius as a Zeus USB flash device. No lights on it nothing. I have done some searching around and found a post for a guy that might be bale to help with remote axx o his SETool Dongle but i wanted to check if this si the best solution or the only solution as there is not much I can find anyway about thisproblem !!!
any help would be much appreciated from the community.
Cheers
Did you try to connect from USB holding back key and then it will take green light. If it works you can flash it through x10flash.
Sent from my MT15i using XDA App
Hit the thanks if I help you.....
Yep tried the back button and connecting the USB it only recognises it as Zeus USB Device no lights thats why i`m stumped
Thanks for the replyany other help or advice would be apreciated.
sorry that not quite understand about your question, English is not my native language and the last sentences is so long that I can't get it....
Do you refer from this:
http://forum.xda-developers.com/showthread.php?t=1254416
I didn't tried that method though, but just guessing, please don't blame if wrong.
May be you install wrong driver somewhere so it detect as "Zeus USB flash device", because I see you need to install driver manually just after connect the testpin.
Try remove the device in device manager and re-install the driver, see if any better.
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
So seus doesnt see your phone in flash mode?
Now your in some **** man.. :/
My phone is getting no juice like its hard bricked but its charge but no led during charging and doesn't turn on
the inspired 4g
hold power button, back button and connect it to pc nd try to flash with seus. see that all the drivers are installed.
ive tried power button thing but still nothing when i plug it i get no led no screen light up but here is a few pictures i even watch the video read the post for flash tool but i cant it to power on at all
is led working??
siddardha21 said:
is led working??
Click to expand...
Click to collapse
No led doesn't turn on I just bought the phone last week
the inspired 4g
it might sound foolish, but if u r still goin thro the same problem, try to flash stock rom using flashtool.
jst dnt connect ur phone..bt start flashtool n start flashing..it will ask u to remove device,hold back button n insert it again..
try doing it,bcz once i was goin thro same problem n it worked for me!!
nowseewhatudid said:
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
Click to expand...
Click to collapse
Hey i have this same problem, i used SE_tweaker tool v4.0, and followed ALL THE INSTRUCTIONS, the program was unlocked suscefully the bootloader, but i turned off and, btw, dont load NOTHING. THE FLASH LED DONT TURNS ON WHILE CHARGING OR CONNECTING TO THE PC, Please, give me an answer, really, i donthave money to buy a phone or send to maintenance, and the Sony Ericsson guarantee has avoid. I am cryiing, REAALLYY!!
PLEEEEEEEEEEAAASEE!!!
X10 mini pro
Can the device enters flash mode ? If yes, try to flash stock kernel using flashtool, or using SEUS...
If it can't enter flash mode, I'm sorry, the I/0 maybe ruined....
Sent from my U20i using XDA
Please.. HEEELLLLPPP!!!
StardustGeass said:
Can the device enters flash mode ? If yes, try to flash stock kernel using flashtool, or using SEUS...
If it can't enter flash mode, I'm sorry, the I/0 maybe ruined....
Sent from my U20i using XDA
Click to expand...
Click to collapse
And... if not........ ???? I tried the flashmode, (i enter quickly in this because i have the combination, anytime i try, everytime green led) but the green led doesn´t turn on not responses, nothing works, my cellphone is a beautiful lego bricked phone.
Any other way? adb, circuit shock, other????
D,: D,: D,:
Pleeeaseee!!!!
Same situation... I heard that
Serial Cable + Setool2 is the only way, but requires activated dongle...
If I succed I'll post about it.
skirhir said:
Same situation... I heard that
Serial Cable + Setool2 is the only way, but requires activated dongle...
If I succed I'll post about it.
Click to expand...
Click to collapse
But is possible... =D =D =D, i dont want to loose my phone, if is possible i search for money and send to the technician to repair the phone =D
sorry for my bad english, and thanks fot help
---------- Post added at 10:22 AM ---------- Previous post was at 09:51 AM ----------
Darcond said:
But is possible... =D =D =D, i dont want to loose my phone, if is possible i search for money and send to the technician to repair the phone =D
sorry for my bad english, and thanks fot help
Click to expand...
Click to collapse
How i do the serial cable? P_P and how to flash the bootloader? anyone knows? =D, im very thankful to give me attention, sorry for the noober questions
Listen tu me...
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
SeeZaar said:
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
Click to expand...
Click to collapse
=D a loop, but thanks for helping
could be the battery. removing it for a couple of seconds or a minute if you like. do some initial charging like 5 to 10 mins or so then try it again. ive seen a couple of post that it worked that way.
demoniacs said:
could be the battery. removing it for a couple of seconds or a minute if you like. do some initial charging like 5 to 10 mins or so then try it again. ive seen a couple of post that it worked that way.
Click to expand...
Click to collapse
no burn risk?
Try this...
nowseewhatudid said:
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
kiki6639 said:
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
Click to expand...
Click to collapse
Hey one problem, THE PHONE DOESN´T TURN ON, THE FLASH LED DONT WORKS,
HM.... i listened about riff, any way to flash without the box?
Pleeaseee, if you want to help, please, read all the posted before comment, but, , thanks
Darcond said:
Hey one problem, THE PHONE DOESN´T TURN ON, THE FLASH LED DONT WORKS,
HM.... i listened about riff, any way to flash without the box?
Pleeaseee, if you want to help, please, read all the posted before comment, but, , thanks
Click to expand...
Click to collapse
Sorry, i have lazy eyes.
Try this:
calangoni said:
I had the same problem. I tried some key combinations like "Power + Back" or "Power + Menu" and it didn't work, but when I tried "Power + Home" the phone came back alive!
Click to expand...
Click to collapse
kkkhattak said:
with speaker there is cover remove it and there is a place.place the needle in it for 1minute and then reply me
Click to expand...
Click to collapse
Its from thread : [Q] Sony Ericsson Xperia x10 mini pro DEAD by gustavo.momente
First of all guys. i'm sorry if a posted this on the wrong place, im new to this Forum and as fasta as i could i will explore it to learn more things.
Ok, my problem is that i have a Xperia X10i and what happens is that it is with battery LOW ! I have de wall charger and the USB Cable, they're both original, and because of LOW Battery is always flashing red as well, after a long time the LED turns green (FlashMode) but is Useless, PC Companion does not install the firmware freezes and then tells me tha sony motor etc failed, Update Service Fails too, says to check if the battery is charged what obviusly isn't, tried flashtool but it always get stuch on some part, maybe its the .ftf tha is corrupted, i don't what place should i downloade FTF's, i downloaded those from sites tha i found on Google, could you guys give me one hand and help me ? I'm starting to get frustrated with this phone, i'll aprecciate your help
PS: Sorry for my English im Portuguese
david1998 said:
First of all guys. i'm sorry if a posted this on the wrong place, im new to this Forum and as fasta as i could i will explore it to learn more things.
Ok, my problem is that i have a Xperia X10i and what happens is that it is with battery LOW ! I have de wall charger and the USB Cable, they're both original, and because of LOW Battery is always flashing red as well, after a long time the LED turns green (FlashMode) but is Useless, PC Companion does not install the firmware freezes and then tells me tha sony motor etc failed, Update Service Fails too, says to check if the battery is charged what obviusly isn't, tried flashtool but it always get stuch on some part, maybe its the .ftf tha is corrupted, i don't what place should i downloade FTF's, i downloaded those from sites tha i found on Google, could you guys give me one hand and help me ? I'm starting to get frustrated with this phone, i'll aprecciate your help
PS: Sorry for my English im Portuguese
Click to expand...
Click to collapse
You could try using a different charger. I had issues with my stock charger once with an older phone of mine and i thought it was my phone. So try that maybe?
Droid Premium said:
You could try using a different charger. I had issues with my stock charger once with an older phone of mine and i thought it was my phone. So try that maybe?
Click to expand...
Click to collapse
Greetings, thanks for the reply, i have already tried a different USB Cable, more than 3 Shall i say, the USB Port isn't because it went to repair a couple of days ago and it wasn't broken, i have flashtool installed but i don't what steps to follow, can you give some help please ? sorry for the inconvenience Once again, sorry for my english
i was unlocking bootloader , when i flashed the phone with E10_2.6.32.60-nAa-05
it stuck in booting , i flashed it again with X10 v1
and the phone now isfully bricked
no red light , no green light , no boot , nothing
help please , :crying:
And sorry for my bad english
talel55 said:
i was unlocking bootloader , when i flashed the phone with E10_2.6.32.60-nAa-05
it stuck in booting , i flashed it again with X10 v1
and the phone now isfully bricked
no red light , no green light , no boot , nothing
help please , :crying:
And sorry for my bad english
Click to expand...
Click to collapse
Yep, it's bricked... you need to have it j-tagged.
SmG67 said:
Yep, it's bricked... you need to have it j-tagged.
Click to expand...
Click to collapse
thanks for answer , but can you explain please
talel55 said:
thanks for answer , but can you explain please
Click to expand...
Click to collapse
The X10BLrelock kernel is for the Big X10, not for our little phones, it overwrites the little bit of address-space used to enable flashmode.
A repair shop with a JTAG machine can use the factory debug connections on the back of the mainboard to repair and flash fresh firmware, it's the only way to get your phone back to work.
SmG67 said:
The X10BLrelock kernel is for the Big X10, not for our little phones, it overwrites the little bit of address-space used to enable flashmode.
A repair shop with a JTAG machine can use the factory debug connections on the back of the mainboard to repair and flash fresh firmware, it's the only way to get your phone back to work.
Click to expand...
Click to collapse
Thnx a lot for helping
but it's expansive
I need a help
I bought inew v3 and this is the first time to buy chinese phone
There were some problems so i tried to upgrade the firmare through flash tools but it failed and now no response ; no recovery open and not recognized when connected with usb.....i think every thing formated
Is there any solution to back it to live again
I've had success with ODIN software. Do a search on the boards here for it.
StarFire_MK2 said:
I've had success with ODIN software. Do a search on the boards here for it.
Click to expand...
Click to collapse
No response .....the mobile is dead even not charging
Inew peoblem
ahmedsh22006 said:
No response .....the mobile is dead even not charging
Click to expand...
Click to collapse
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
puding22 said:
same thin my cant be charged, no led lamp on, bt it is recognized withoud battery by computer and can be flasher. But i cant turn it on.
Help pls
Click to expand...
Click to collapse
Same problem occurred to me today. Did you manage to fix it?