Here is a bat file for Redmi 3x
if your device with mi account lock , you can not pass setup after factory data reset.
it is easy ....
1. device connect with edl mode
2. backup persist
3. format persist
4. reboot your device and device can fully setup and go home screen. restore with any mi account from local backup & restore function. ( Wifi & Bluetooth would not be work for temporary , dont be worry )
5.reboot device to edl mode again and restore your persist ( if you dont have persist.img , plz extract from firmware and you can use it )
All done....
Now your device work perfectly and fully setup with Mi account.
Here is download link for scripts
https://my.pcloud.com/publink/show?code=XZyrblZyrAcC0Q5fEhvjjy5JYUhbVa6Cax7
Thanks sir phyo nyi nyi. Very nice tutorial and you are awesome. We learnt a lot from you.
Thank for sharing
thanks for sharing and remember anybody
redmi 3x, 3s (codename LAND) ≠ redmi 3 / pro / prime (codename IDO)
scri . carefully read and take ur brain that is 3x and 3s . if ur a tech u will see. don't be j.
thanks moderators
Thanks sir Phyo
ေက်းဇူးတင္ပါတယ္ ျဆာၿဖိဳး
Thanks
Thank , Sir
Great, thank for sharing your knowledge.I'm learning from mppg's page.Thank a lot, Sir
Thank Sir phyo
Where is 'prog_emmc_firehose_8937_ddr.mbn' in Redmi 3X? Is the file same in all the xiaomi devices?
hi,can you tell me hou to backup persist with edl mode?which tools and steps..thanks you very much.
Phyo Nyi Nyi said:
Here is a bat file for Redmi 3x
if your device with mi account lock , you can not pass setup after factory data reset.
it is easy ....
1. device connect with edl mode
2. backup persist
3. format persist
4. reboot your device and device can fully setup and go home screen. restore with any mi account from local backup & restore function. ( Wifi & Bluetooth would not be work for temporary , dont be worry )
5.reboot device to edl mode again and restore your persist ( if you dont have persist.img , plz extract from firmware and you can use it )
All done....
Now your device work perfectly and fully setup with Mi account.
Here is download link for scripts
https://my.pcloud.com/publink/show?code=XZyrblZyrAcC0Q5fEhvjjy5JYUhbVa6Cax7
Click to expand...
Click to collapse
I can use this tool for my device Xiaomi Mi Note 3?
Related
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good:
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Use fastboot method to install fastboot rom
Taskavenkat said:
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Click to expand...
Click to collapse
Do you know how to work with SP Flash Tools? It's what I would recommend.
kiko9895 said:
Do you know how to work with SP Flash Tools? It's what I would recommend.
Click to expand...
Click to collapse
Hi ,
Thanks for your reply.
SP flash tool only for MediaTek Devices. But Redmi 2 prime is Qualcomm device.So i am unable to use the SP flash tool.
Can you suggest me any other idea?
Hi
try fastboot method to restore recovery and other stuffs......
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
DarthJabba9 said:
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
Click to expand...
Click to collapse
oh sorry... i will check this on Redmi 2 prime forum.
Thanks.
Hi Guys,
I mistakenly wiped my whole device with qcomloader. I selected "erease all" in setting and it wiped my persist partition. SO, here is the method how I make it all working back. Thanks karthick mostwanted for the help all the way.
Follow the steps at your own risk. As, we r going to use Lenovo ZUK Z2 persist.img for our k6 note. It worked for me but i dont know if it will work for all or not.
1. flash the marshmallow firmware using Qfil or qcomloader
here is the link for the firmware.
https://firmwarefile.com/lenovo-k6-note-k53a48
2. flash the qcn file with the download.exe present in the bin folder of the qfil software
youtube link for editing and inserting original imei. Its little bit tricky but if u have wiped ur persist then u would be smart enough to understand the video and make your own .qcn file:laugh::laugh:
https://www.youtube.com/watch?v=zn_D6TEFABQ
3. enable developer options, usb debugging and unlock bootloader if its locked.
sample video to flash the qcn file
https://www.youtube.com/watch?v=XZxbiajXA5c
4. Optional step if u want to update it to nougat then download the following flash file and flash it with qfil or qcomloader, this link is very precious as i wasted many days for searching and finally "karthick mostwanted" gave me the link
http://lenovo-forums.ru/topic/24950-proshivka-lenovo-k6-note-k53-dualsim-k53_s228_171114_row_qpst/
5. Now comes the crucial step
download and install minimaladb and fastboot from here
https://forum.xda-developers.com/showthread.php?t=2317790
7. Download persist_3.1.194_ZUK_Z2.img and rename it to persist.img
copy the persist.img file to the installed Minimal ADB and Fastboot folder
8. connect your device in normal mode (power on)
9. open "cmd-here.exe" present in minimal adb foldder
run commands
adb reboot bootloader
fastboot flash persist persist.img
and you are done!
Keep fingers crossed to work it for you!
If you have any querries then please post here. I would reply when i get time.
Firt I used redmi note 3 persist but with that wifi was connected but internet connection was not everytime established. but with zuk z2 persist internet connection is speed is more than expected.
This comes under development section?
@xanthrax please check it out.
karthick mostwanted said:
This comes under development section?
@xanthrax please check it out.
Click to expand...
Click to collapse
Thread moved, thanks
xanthrax said:
Thread moved, thanks
Click to expand...
Click to collapse
I saw it.?. I think it is my first development thread started by me.?
thank you
it worked for me too
I bought RN 4 Mediatek with the cheapest deal, 4/46, Its still usable, n i forgot to do overall check coz its cheap
The issues :
1. i cant log on my Mi Account, coz everytime i do that, the notif 'getting security info' shows, n it never stop
2. I cant update apps in playstore. I can install new apps from apkpure site but it need to reboot
3. Everytime after reboot, a 'wait for debugger to attach' notif slways shows, n its related to Mi Find Device
So i assumed this RN 4 is Bricked n now i need HELP to UNBRICK it n i wish someone know also the test point. Coz like i used to unbrick other Mi phones, flashing via test point can fix all software issue
PLEASE HELP
T.I.A
First of all it's technically not bricked but considering that it's a cheap deal that probably means it's used and I hope you got the MI account that can unlock this phone, been long since I used miui on my note 4 so I dunno what happenes if you don't have it
but anyway here are some tips
1- if the device is unlocked try wiping all user data through the miui recovery (or if it has other recovery like twrp)
2- if the device isn't but you can still access fastboot then you might be able to erase the user data using
[fastboot erase userdata]
That's ocourse that means you need fastboot on your PC Abd also the device USB drivers
3- if that's still not working you might need to actua flash a stock ROM using MiFlash tool, while you're at it look for "deep flash" cause in my case just flashing in fastboot mode had so many troubles, but in download mode it went perfect
PS: I entered the download mode on my note 4 through fastboot code that I really can't remember right now, try this before resorting to short circuiting your device for download mode
Hello, after a week waiting for unlocking the phone, i tried to install twrp unnoficial following a guide on the web... now the phone is totally bricked., it dosnt go into recovery mode only fastboot and after 10 seconds it restarts, i have adb installed properly on the pc, it detects my old poco f1 but the x3 gt isnt recognized and reboots after 10 seconds...
have anyone experienced this, or know of a possible solution? i really need help
ohh adding more info... maybe i messed up the boot partition, cause extracting the rom and looking at the flash_all.bat it says boot_ab and i did to boot... after this it entered the loop, it was recognizing the phone but i tried installing the room via miflash, gave error everytime i tried and now it isnt being recognized plus after 10 sec in fastboots it restarts... there is no charging battery creen just the loop
Just get a new device now
lol i dont want tooo... was thinking bout that
well... slowly, step by step using SP flash tool i am now able to see the poco logo and charging batery again... algo into fastboot i can get... gonna keep this updated in case anybody has this issue
btw.. there are 3 files i cannot flash, it gives error...
dpm_a.img
cust.img
rescue.img
rescue.img says mismatch, but i extradted the files from the downloaded poco rom, dows anybody know thy this happen?
well almost fixed... i managed to flash the room a while ago... now it can go into recovery mode, but says NV corrupted, any idea?
it can only boot into fastboot and recovery... i supose as it has something corrupted it wont boot into the system
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Ocelado said:
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Click to expand...
Click to collapse
eres español?
Ocelado said:
eres español?
Click to expand...
Click to collapse
Ocelado said:
yeah i speak spanish... well i will try, i flashed using sp flash tool, maybe its different using miflash?
Click to expand...
Click to collapse
i wanted to root my x3 gt but the unnoficial twrp around is what bricked my phone ahahaha
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
how did you installed, fastboot? what partition name did u use? i followed a guide that said recovery but x3 gt uses rescue i believe... this is wht bricked me
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
i flashed it to boot like the site says, but there is no recovery now... i can get into the system but no twrp recovery holding vol up and power
Rynhe said:
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Click to expand...
Click to collapse
you must turn on wifi to see mac address
Gaderg1992 said:
you must turn on wifi to see mac address
Click to expand...
Click to collapse
nope it wont let me.. i turn it on and does nothing...
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Ocelado said:
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Click to expand...
Click to collapse
man you are right.. idunno what hapened.. suddenly it jst booted in twrp
gl i hope i can help you. If you need more help just write here
Ocelado said:
gl i hope i can help you. If you need more help just write here
Click to expand...
Click to collapse
thanks... do you know of any custom rom for x3 gt? i cant use miui cause it says cant connect to google server at forst boot config
iv tried many gsi but none of these bots up after flashing to system
No... I don't know any rom...
2 things: have you installed the global rom? Try the global. Else, try skipping the logging in and then try it by entering gmail or in settings