Hi friends.
I just bought one Formuler IPTV.
i looked up the build number its android .
now i tried to pull a APK from the box after pulled an putted on USB.
i tried to install it on a other TV box but with no succses.
now i tried to force install this with ADB but also no succses.
C:\Users\Baas\Downloads\ADB\ADB>adb install mtvol.apk
1021 KB/s (10720517 bytes in 10.248s)
pkg: /data/local/tmp/mtvol.apk
Failure [INSTALL_FAILED_SHARED_USER_INCOMPATIBLE]
This is the message im getting.
Anybody knows a workaround ?
Thank you for support .
UP
farmeobaas said:
Hi friends.
I just bought one Formuler IPTV.
i looked up the build number its android .
now i tried to pull a APK from the box after pulled an putted on USB.
i tried to install it on a other TV box but with no succses.
now i tried to force install this with ADB but also no succses.
C:\Users\Baas\Downloads\ADB\ADB>adb install mtvol.apk
1021 KB/s (10720517 bytes in 10.248s)
pkg: /data/local/tmp/mtvol.apk
Failure [INSTALL_FAILED_SHARED_USER_INCOMPATIBLE]
This is the message im getting.
Anybody knows a workaround ?
Thank you for support .
Click to expand...
Click to collapse
?
Hi i tried also everything, changin device id to that of formular. Faking the formular device by editing the build.prop. nothing helped. With apk editor i managed to install by choosing install to internal.
But the app still keeps crashing, and doesnt start.
Breppo said:
Hi i tried also everything, changin device id to that of formular. Faking the formular device by editing the build.prop. nothing helped. With apk editor i managed to install by choosing install to internal.
But the app still keeps crashing, and doesnt start.
Click to expand...
Click to collapse
You manged to get further then me already did the job ?
Difficult
Hi its more difficult than i thought.
Think the apk is signed so you need the original keys.
In short nearly impossible without pro skills
Breppo said:
Hi its more difficult than i thought.
Think the apk is signed so you need the original keys.
In short nearly impossible without pro skills
Click to expand...
Click to collapse
Thats bad waiting then haha
your sure its not looking for a driver for something and crashing cause said driver is not providing something? (Similar to SDR touch and the RTL driver for radio)?
Darkcon said:
your sure its not looking for a driver for something and crashing cause said driver is not providing something? (Similar to SDR touch and the RTL driver for radio)?
Click to expand...
Click to collapse
I don't think so, because nearly all apps of that device refuse to install.
and if you remove shareduserid, than it installs but says unsupported device.
although ist nothing special about that damn device.
i think it only checks a value of file in the filesystem if its there and as it cant find it refuses to work.
its also very confusing, that most apps say that the device is rooted, but as soon you try to enter the /data
folder it refuses the connection.
very secure thing.
its called
dreamlink t1 in the US
or formuler in the EU
I was able to get to this point: https://forum.xda-developers.com/showpost.php?p=76462281&postcount=17
Hi i got to the same point. I think its impossible to solve the problem without the sourcecode.
Breppo said:
Hi i got to the same point. I think its impossible to solve the problem without the sourcecode.
Click to expand...
Click to collapse
I was able to pull the sourcecode, I will upload it soon...
Did you manage to get it running on android? Would love to know how foruler want a lot of cash when it is only this app that is any different
Source code I was able to pull, not sure if this enough...
https://mega.nz/#F!1IU3TbYT!AHh1JCUJzB0HR0nkJlayaA
SnakeEYEPTY said:
Source code I was able to pull, not sure if this enough...
https://mega.nz/#F!1IU3TbYT!AHh1JCUJzB0HR0nkJlayaA
Click to expand...
Click to collapse
Can you get a copy of the ROM or framework-res and lib folder from the system?
Sent from my [device_name] using XDA-Developers Legacy app
Related
Mine is a froyo 2.2.1 device (ViewSonice VB730), I tried z4root, instant root, DPRoot, and many many many rooting apk but it is not working, some of them are FC or some of them are stucking in "attempting to apply root"
I tried to use SuperOneClick but since I can't find a suitable driver for it, so when I use "adb devices", the list is empty.
I also checked out about some article about how to manually root a devices with PC, seems I have to copy the necessary file first to /data then run the exploit. Since I dont have the driver, I tried to do it with Terminal Emulator and tried to grand access right of /data but failed.
cd /data/
$ ls
ls: can't open '.' : Permission denied
$ chmod 777/data
chmod: /data. Operation not permitted
What should I do
Still no one answer this..
Sorry, I cant help you. Just interested in the right answers.
Not sure but if you can find a copy of Z4Root it might work on Froyo
Sent from my Transformer TF101 using Tapatalk
baseballfanz said:
Not sure but if you can find a copy of Z4Root it might work on Froyo
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
I have tried it before but it keep stucking at "attempting to apply root"
I am here and still waiting for the answer..........
Another 12 hours has just passed...
Another 12 hours just passed......again
Don't be so sad. I am here with you.
Mr.Wrong said:
Don't be so sad. I am here with you.
Click to expand...
Click to collapse
Thanks
I just wonder if I post this in wrong section so no one is here
Nooope, maybe just the ones who can answer it are happened to be falling in love with their ladies and cant spare time here. Why don't you try some ways of rooting the similar phones. There are so many people out there talking about rooting their devices everywhere, maybe you can try some. Next time I will copy for you.
Mr.Wrong said:
Nooope, maybe just the ones who can answer it are happened to be falling in love with their ladies and cant spare time here. Why don't you try some ways of rooting the similar phones. There are so many people out there talking about rooting their devices everywhere, maybe you can try some. Next time I will copy for you.
Click to expand...
Click to collapse
I tried almost any method before opening this thread.. like Superoneclikc, z4root or some similar ways or apps, but if you still have any recommendation for me, I will still try it and thanks
few days passed, still try to pump this for hope
still try to pump this for hope
I wonder ViewSonic vb730 is same as Creative ZiiO 7" tablet in view of their features and CPU. The guide at http://forum.xda-developers.com/showthread.php?t=1010402 may also apply for ViewSonic vb730
aleunghk said:
I wonder ViewSonic vb730 is same as Creative ZiiO 7" tablet in view of their features and CPU. The guide at http://forum.xda-developers.com/showthread.php?t=1010402 may also apply for ViewSonic vb730
Click to expand...
Click to collapse
(pump thread and reply )
I heard about this method before, but the main problem is I can't find the suitable driver for the device so I am not able to perform any action related to the adb.. can you tell me which one you have choosen which one for your Creative ZiiO 7"? Thanks a lot!
few days a pump
I'm going to say I have the same problem with the VB730. I wish to root this thing but can't seem to make it work (in spite of hours and hours of work). Programs I've tried:
Z4 Root
Universal Androot
Instant Root
SuperOneClick
I've also attempted to do it by hand. No dice. I have installed File Expert which allows me to see all the files including the system files, however, I cannot write to these files nor change them without at least temporary root access.
After looking around though, I think the problem seems to be the same as the Creative ZiiO tablet in that there is no driver available for the USB debugging and even once you get those files, the Android system files aren't in normal places so you'd have to figure out a workaround for it.
I tried following the guide here and I believe this would work but for the problem of the USB driver. I wrote to ViewSonic asking for a solution to get my USB Debugging to work but they have no idea what to do it seems. Or they just don't care enough to figure it out.
I tried using the PID, VID and MI for the ZiiO as per the guide (despite it being for a different vendor and product) which got the driver to install and recognize the VB730 as an Android device (when first installed, it came up with a bad parameter but I restarted the device, reinstalled the driver and the problem disappeared) but I am unsure where to make and put the adb_usb.ini file as there isn't a ".android" file located on the VB730 (there IS a ".android_secure" folder on the write-able portion though). So, when checking for devices through ADB I get a readout that says no devices are connected.
Anyone have any ideas on what else I (we) could try? Thanks both for the help already given and any still to come!
Try superoneclick 2.1.1 ,It may help you.
cuplzz said:
Try superoneclick 2.1.1 ,It may help you.
Click to expand...
Click to collapse
Nope! That's the version I tried. Not going to work.
hi guys, i'm new in this forum, and i'm new to android too, i just bought a htc desire x and want it to be root, but i have problem when trying to get token id in hasoon2000 HTC Desire X All-In-One Toolkit V2.0 [1-1-2013], it says C:\ Document is not recognized as an internal or external command openable program or batch file.
usb debugging is already connected, please any one kindly fixing my problem, thx
sorry for my bad english. btw i'm from indonesia
Did you follow these steps?
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
thx for replying so quick, after i downloaded then i extract to desktop and just run the program by clicking the symbol written as desire, am i doing it right?
Try to unpack it somewhere else on a root of some partition of your PC, try to unpack it to non system partition.
ok thx, i'll try it tomorrow, i'm sorry i've to go home coz it's 11.41pm already in my town, and i'm still on friend's house.
thx anyway for your reply, i'll let you know the progress
hi nlooooo, i did what u told me to do and it worked, i unpacked to (Cdrive, but another problem came on my device when i clicked get token id.
here is the picture shows the problem
@nlooooo.....i just tried your way on rooting this device, and same problem came up on step 8 when getting token id, still it says C:\ Document is not recognized as an internal or external command openable program or batch file, i've found out my device still locked, is it because of the device still lock? here's the image shown
problem solved
hi nlooooo......i've rooted my device, just try to put all the downloaded file to C:drive, and followed your tutorial on your thread, and i succeeded, at least i saw superuser on my device, thx alot for your tutorial.
No problem, that's why we're here. If you see it then it should be it. Try to install some app that requires root privileges (Titanium Backup for ex) and see if it can get SU rights.
hi.....any recommendation of apps or what to do after this rooting? cos i really a noob in android and root things. thx
uso_diario said:
hi.....any recommendation of apps or what to do after this rooting? cos i really a noob in android and root things. thx
Click to expand...
Click to collapse
Yeah install AdFree, and get rid of the ads
ayyu3m said:
Yeah install AdFree, and get rid of the ads
Click to expand...
Click to collapse
Well, it works for me with wifi but not with mobile data, it's configured over APN IP.
nlooooo.....sorry to bother you again, but i think my dx still not rooted, cos when i installed titanium backup root it comes like this, what do i hv to do?
ayyu3m said:
Yeah install AdFree, and get rid of the ads
Click to expand...
Click to collapse
heyyy........thank you
uso_diario said:
nlooooo.....sorry to bother you again, but i think my dx still not rooted, cos when i installed titanium backup root it comes like this, what do i hv to do?
Click to expand...
Click to collapse
Go and open Superuser app, swipe to first screen and see if the binary is installed. Then go and clear data for Titanium and open it again.
If you still have the problem use some root explorer to check folder system/bin if there is a file named su.
nlooooo said:
Go and open Superuser app, swipe to first screen and see if the binary is installed. Then go and clear data for Titanium and open it again.
If you still have the problem use some root explorer to check folder system/bin if there is a file named su.[/QUOTyes..there is binary installed, but it says outdated binary notification ticked
Click to expand...
Click to collapse
That's ok it should be like that. For me Titanium is working fine I have no problems.
nlooooo said:
That's ok it should be like that. For me Titanium is working fine I have no problems.
Click to expand...
Click to collapse
hi nlooooo........finally i got it fixed by start it all over again today........i'm new in this forum, don't know whether i can click your thanks button or not, but i will try it anyway, thx a lot
ps: i think it clicked
uso_diario said:
hi nlooooo, i did what u told me to do and it worked, i unpacked to (Cdrive, but another problem came on my device when i clicked get token id.
here is the picture shows the problem
Click to expand...
Click to collapse
I've got the same screen too, nothing is happening. What did you do to make it work?
i am getting stuck at last step i am always getting this message sending 'unlocktoken' (0kb) .
i have not installed htc sync app but just directly installed the drivers for unlocking purpose.
the boot loader is recognizing the usb connection as Fastboot usb.
using windows 7 32 bit operating system.
tried putting the unlock_code in c drive and desktop but it doesnt work.
the file is just a 1kb file.
the default view is shown as a vlc player file.
any help will much appreciated. this is my 1st htc mobile and am not used to this kind of rooting. previously owned a samsung so was using odin a lot.
Hello everyone.
I own a rooted THL w8s.
Today, I accidentally deleted a folder from the root menu.
The story is this one; I was trying to install an app but it would fail installation. So I read in here that if i moved the apk file in the root browser/data/app it would then get installed.
So I copied the file, went to the app folder but I couldn't find how to paste it. So I exited the app folder, long pressed it and a menu popped up that had the choice move. Unfortunately, what was moved was the app folder from the root menu and now no app is working! Worse than that, is that Google Play isn't available any more!
Any solutions?
Thanks
lux aeterna said:
Hello everyone.
I own a rooted THL w8s.
Today, I accidentally deleted a folder from the root menu.
The story is this one; I was trying to install an app but it would fail installation. So I read in here that if i moved the apk file in the root browser/data/app it would then get installed.
So I copied the file, went to the app folder but I couldn't find how to paste it. So I exited the app folder, long pressed it and a menu popped up that had the choice move. Unfortunately, what was moved was the app folder from the root menu and now no app is working! Worse than that, is that Google Play isn't available any more!
Any solutions?
Thanks
Click to expand...
Click to collapse
Weird that that would affect the Play Store since it isn't located in /data/app. But if a factory reset doesn't help, then you will have to reload the stock OS. I imagine it would need to be done with the SP Flash Tool since it's a THL and I'm assuming a MediaTek chip.
es0tericcha0s said:
Weird that that would affect the Play Store since it isn't located in /data/app. But if a factory reset doesn't help, then you will have to reload the stock OS. I imagine it would need to be done with the SP Flash Tool since it's a THL and I'm assuming a MediaTek chip.
Click to expand...
Click to collapse
Thanks for your answer.
I tried to factory reset it (shut down button + volume up) but it shows a dead android!!
I am a newbie at that, could you give me more detailed info or a link with step by step guide, please?
http://www.thlmobilestore.com/news/thl-w8s-firmware/
Hi again,
I've followed the instructions shown in the link. However, 5 minutes later, the red bar has not started loading yet.
Is it normal?
lux aeterna said:
Hi again,
I've followed the instructions shown in the link. However, 5 minutes later, the red bar has not started loading yet.
Is it normal?
Click to expand...
Click to collapse
Don't think so. Check your Device Manager to make sure that your PC has loaded the drivers correctly.
es0tericcha0s said:
Don't think so. Check your Device Manager to make sure that your PC has loaded the drivers correctly.
Click to expand...
Click to collapse
Drivers are ok!
Any chance that the app folder I deleted contained any necessary files for that?
lux aeterna said:
Drivers are ok!
Any chance that the app folder I deleted contained any necessary files for that?
Click to expand...
Click to collapse
Nope. The whole idea of the flash tool is to be able to reload the OS. Doesn't matter that you did that or had a custom rom and recovery on it, it should still rewrite the OS back to it. But I don't work on MediaTek devices at my shop because hardly anyone buys them around here so I just know this stuff from reading lots of other posts. There are TONS of guides and how-to videos. You'll probably need to check some of them out and see if you are missing something or are in the wrong mode for the program to start. Any device that has the same chipset as your phone will have the same instructions for reloading the OS, just with the appropriate files for yours.
es0tericcha0s said:
Nope. The whole idea of the flash tool is to be able to reload the OS. Doesn't matter that you did that or had a custom rom and recovery on it, it should still rewrite the OS back to it. But I don't work on MediaTek devices at my shop because hardly anyone buys them around here so I just know this stuff from reading lots of other posts. There are TONS of guides and how-to videos. You'll probably need to check some of them out and see if you are missing something or are in the wrong mode for the program to start. Any device that has the same chipset as your phone will have the same instructions for reloading the OS, just with the appropriate files for yours.
Click to expand...
Click to collapse
ok, thanks a lot for your help
Problem solved. It was the drivers I was missing. I don;t know if I am allowed to post them here. If anyone needs them,just PM me :cyclops:
It's always those stupid drivers...
Hi there,
I was able to build a custom AOSP from source and flash it on my device (hammerhead, 4.4.4/KTU84P). I also installed the appropriate device drivers on developers.google.com/android/nexus/drivers.
However, my phone is unable to get any location fix. The location setting is set to "High Accuracy" mode, but none of the apps are able to get location updates, even after me waiting for 2+ minutes. I was able to confirm that LocationManager.getAllProviders() actually returns both "passive" and "gps". Has anyone else seen this?
When I flash the device to factory setting, getting a location lock is not a problem. Any suggestions?
Cheers,
Minh T. Nguyen
enderminh said:
Hi there,
I was able to build a custom AOSP from source and flash it on my device (hammerhead, 4.4.4/KTU84P). I also installed the appropriate device drivers on developers.google.com/android/nexus/drivers.
However, my phone is unable to get any location fix. The location setting is set to "High Accuracy" mode, but none of the apps are able to get location updates, even after me waiting for 2+ minutes. I was able to confirm that LocationManager.getAllProviders() actually returns both "passive" and "gps". Has anyone else seen this?
When I flash the device to factory setting, getting a location lock is not a problem. Any suggestions?
Cheers,
Minh T. Nguyen
Click to expand...
Click to collapse
What you could do is look at the gps drivers that are extracted by the neuxs 5 driver binary script, then take the nexus 5 factory image pull those same drivers as the script extracts, and then using "PRODUCT_COPY_FILES += your/path/to/files" in the Android.mk file to copy those files to the right places when compiling.
shimp208 said:
What you could do is look at the gps drivers that are extracted by the neuxs 5 driver binary script, then take the nexus 5 factory image pull those same drivers as the script extracts, and then using "PRODUCT_COPY_FILES += your/path/to/files" in the Android.mk file to copy those files to the right places when compiling.
Click to expand...
Click to collapse
Hi shimp208. Thanks for the suggestions. I ended up doing this and it turns out that the files pulled from the (working) factory image are the exact same as the one I downloaded and have currently in my build script. So it might be something else. Thanks though.
enderminh said:
Hi shimp208. Thanks for the suggestions. I ended up doing this and it turns out that the files pulled from the (working) factory image are the exact same as the one I downloaded and have currently in my build script. So it might be something else. Thanks though.
Click to expand...
Click to collapse
For what it's worth, I was able to get a geo fix after installing Google Play Services.
enderminh said:
For what it's worth, I was able to get a geo fix after installing Google Play Services.
Click to expand...
Click to collapse
That was going to be the next suggestion, truth be told despite the open nature of AOSP it still is often the case nothing seems to be quite as polished or work as seamless as intended, unless Google Play Services and basic Gapps are installed, just my two cents though.
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
- Backlight Control (added 25/5/2018)
I'm getting very near to have the touch and the keyboard working though
P.s. In attach you find the outputs from 3DMark - IceStorm Extreme (default settings), would be much appreciated if someone with the real Win version shared its score
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Broomfundel said:
Any chance of posting you work to date. Got an X90F just crying out for Windows.
Click to expand...
Click to collapse
I have added the link to the guide! If yo have any issues let me know but keep in mind that currently no input devices (touchscreen or keyboard) work!
Thanks for posting this. I am really so impressed. Will be trashing my X90F tomorrow. Just got to dig out a powered USB hub. Ill report back, and lets see what happens.
(Hopefully not a brick)
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Broomfundel said:
OK,
So far so good. I get to the amending of the of aml. But keep getting.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler/Disassembler version 20180508
Copyright (c) 2000 - 2018 Intel Corporation
iASL: Segmentation Fault
iASL: Terminating
To clarify the process. Decompile the DSTDroid.aml, then insert the OperationRegion (GNVS, SystemMemory, 0x7B3CF000, 0x0369)
Field (GNVS, AnyAcc, Lock, Preserve)
{ etc.. } section from the DSTDroid.dsl and use it to replace the equivalent section in the DSTWin.dsl in your files.
Then compile the DSTWin.dsl with the
iasli -ta DSDTWin.dsl
command.
This is how I am reading it, but have not managed to get it to work yet.
It decompiles with the two errors you mention, but wont recompile no matter how I try it.
I am using Notepadd++ so its not hidden characters.
Any thoughts, and thanks again for your efforts on this.
Click to expand...
Click to collapse
Hello Broomfundel,
I never got that error, but it seems to be a problem of the ASL Compiler build not of your file.
I am using Mac so I have another build, if you want to post the file I can compile it for you .
Otherwise you can try an older release or to build the tool from source maybe?
Poz1 said:
Hello guys!
I'm starting this thread as I managed to install win10 on my X90L (Android) YogaBook
It was not easy to find a way to fix the ACPI error but it is possible!
Will update this post in a few hours with a guide on how to do it yourself.
UPDATE: link to the guide -> poz1.com/windows-on-android-lenovo-yogabook/
PLEASE NOTE THAT IF YOU CONTINUE YOU WILL END UP WITH A YOGABOOK WITHOUT INPUT DEVICES!!!
(EXTERNAL KEYBOARD WILL BE NEEDED) AND NO ANDROID INSTALL!!!
So far i got almost everything working except:
- Touchscreen
- Keyboard
- Webcam in the keyboard panel (the other one works fine)
- NFC
I'm getting very near to have the touch and the keyboard working though
Click to expand...
Click to collapse
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
THE MAXIMUM POWER said:
Hi, i have the Lenovo Yoga Book Windows version, im crying to install Stock Android on it, can you PLZ write a guide about doing it, or at least if there is a way to install the kernelflinger.efi or the fastboot mode on YB windows it will be great.
to fix the whole bugs you faced, try to reinstall windows 10 using this methode https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Thanks
Click to expand...
Click to collapse
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Broomfundel said:
OK, Older release worked, but I get a .hex file, your instructions talk about a new aml file. Do I use the .hex file or is there another option other than the -ta one that would create the aml.
BTW. I am enjoying this. So thanks again.
Click to expand...
Click to collapse
With the -ta option I get both the .hex and the .aml file but you can try -tc if it doesn't work. Maybe due to the different build
P.s. (for other people that may incur in this) If you don't get the output files check that you have as last line of the terminal
"Compilation complete. 0 Errors"
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Poz1 said:
Hi,
KernelFlinger is opensource and come with an installer, it should be pretty simple to install it.
Right now I don't have my YogaBook as I am travelling but I can try in the next few days
Click to expand...
Click to collapse
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Poz1 said:
Hello guys!
Click to expand...
Click to collapse
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
As Poz1 is obviously busy at the moment. Can anyone else get the DSTDWin.aml file for me to try and decode?
Thanks
Sorry guys I've been busy with university
Broomfundel said:
OK, I am getting 7 errors. My current theory is that the DSTDWin.dsl will only compile with the same version number of the compiler it was decompiled with. I have attached my DSDTDroid.dsl so you can have a go. At least it will prove I got things right up to that point. Might be worth posting the original DSTDWin.aml for me to try this end.
If we are lucky it might turn out that the patched DSTDWin.aml files are consistent across the same model devices.
Click to expand...
Click to collapse
There you go I'm also updating the files DSTDWin of my blog with one with some fixes Well they depend on the settings you use in your Bios (that's why Windows may not boot after install, it changes some parameters (the wait time of the bios and the default boot partition)). When you use the builtin one is the bios that "updates" it for you but for now we need to do it by hand If we are going to end with everything working we can release a patched "Win" bios and everything will be simpler
Riskypedia said:
So... It seems both pen mode and keyboard mode of holo keyboard won't work... Am I right?
It's sad that if they won't work even we install the drivers from the lenovo website
Click to expand...
Click to collapse
I know There something in the DSDT (the file that tells the os which and where your pc components are) that has to be fixed to make Windows see these parts correctly
THE MAXIMUM POWER said:
can after installing Windows booting to kernelflinger? if you can make a thread about how can you install/reinstall kernelflinger will be amazing?
Thank you
Click to expand...
Click to collapse
Didn't try Will do as soon as I have some free time :fingers-crossed:
Kinyapiplele said:
Have you tried with the ISO from this forum with the Windows injected drivers? Here https://forum.xda-developers.com/yoga-book/how-to/windows-guide-creating-windows-10-t3718823
Click to expand...
Click to collapse
Yep, but the problem is in the DSDT Thanks fot the input anyway
Poz1 said:
Sorry guys I've been busy with university
Click to expand...
Click to collapse
Don't worry, we all have real lives as well. I'm in the UK and we have a bank holiday on Monday. So this weekend, Ill get stuck in again.
Thanks for all your doing on this. You have already got further than anyone else who tried.
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Poz1 said:
let me know if you have more problems
I have added a 3DMark test in the first post for those that are interested in how it performs
Click to expand...
Click to collapse
Just another Question, you as a Advance user, do you believe that we (yoga book Windows owners) can boot Android yb STOCK ROM ( i mean not the Android x86 based distros)?
Yes, but I think you would have to do the "reverse" DSDT injection (from win to android) as the official ROM has drivers for that components.
This means that, if you're lucky you would end up with our same problems (keyboard, pen and touch). If we don't fix that before
The problem with Android is that it is meant to be flashed on rom instead of being installed and this makes things more difficult.
It should be possible to flash the rom on an USB key, add grub and use it for DSDT injection like we do and see what happens.
Another problem is that the provided kernelflinger seems to have most of the security options enabled so 99% it will refuse to boot anyway.
Since it is opensource it should be possible to fix this anyway.
So yes, but it a loooong journey