TWRP not loading - LeEco Le Max 2 Questions & Answers

After trying to install the Custom of Cuoco92 (chinahandys(dot)net/leeco-le-max-2-flashen-cuoco92-rom/). Im stuck on booting into TWRP. I got a blue screen flash for like one second and after that i got a black screen and permanent blue led.
At the moment i can reach the fastboot mode by pressing the volume down and the power botton. I cant reach the TWRP.
Thanks for helping!

Eseljaeger said:
After trying to install the Custom of Cuoco92 (chinahandys(dot)net/leeco-le-max-2-flashen-cuoco92-rom/). Im stuck on booting into TWRP. I got a blue screen flash for like one second and after that i got a black screen and permanent blue led.
At the moment i can reach the fastboot mode by pressing the volume down and the power botton. I cant reach the TWRP.
Thanks for helping!
Click to expand...
Click to collapse
This is common problem. Flash another TWRP manually.
Sent from my Le X820 using Tapatalk

Related

HELP! Bricked GT-I9500 MTK 6572_S00

Hello, i'm having some problems with an MTK 6572_S00 GT-I9500 Clone. I flash to it a wrong firmware and brick it really bad, after a few days of downloading tools, drivers and firmwares, managed too install the proper drivers (PreloaderUSB and DA USB) and with that flash a rom wich makes the phone to power on a red led (then it goes blue), the capacitive bottons and when i touch the power botton it makes a sound like is the screen was unlocking, but the problem is that the screen remains black, it doesn't do anything.
So... The problems that i'm having right know are:
1- The phone looks like is booting up, but the screen never do anything
2- I cannot flash another firmware to the phone, the ones that i have downloaded shows me an error message that says "Nand Flash was not detected"
3- I make a backup of my original firmware before flash anything to it, but i when i tryed to restore it, the SP Flash Tools showed to me an message error wich says that my phone was an MT6572_S00 and i tryed to flash a ROM for an MT6589.
Any ideas will help!
Adding some recently news:
Flashed some part of another firmware and made to screen lights up but the phone still doesn't boot in the regular way. When i push Volume + and Power botton it boots on Factory mode i think because it shows a black menu with three boot options (Recovey, Fastboot and Normal). If i pick Normal or Recovery mode the screen goes blank and starts to blink, if pick Fastboot shows a message that says Fastboot Mode On or something like that.
Download mode
elfanto said:
Hello, i'm having some problems with an MTK 6572_S00 GT-I9500 Clone. I flash to it a wrong firmware and brick it really bad, after a few days of downloading tools, drivers and firmwares, managed too install the proper drivers (PreloaderUSB and DA USB) and with that flash a rom wich makes the phone to power on a red led (then it goes blue), the capacitive bottons and when i touch the power botton it makes a sound like is the screen was unlocking, but the problem is that the screen remains black, it doesn't do anything.
So... The problems that i'm having right know are:
1- The phone looks like is booting up, but the screen never do anything
2- I cannot flash another firmware to the phone, the ones that i have downloaded shows me an error message that says "Nand Flash was not detected"
3- I make a backup of my original firmware before flash anything to it, but i when i tryed to restore it, the SP Flash Tools showed to me an message error wich says that my phone was an MT6572_S00 and i tryed to flash a ROM for an MT6589.
Any ideas will help!
Adding some recently news:
Flashed some part of another firmware and made to screen lights up but the phone still doesn't boot in the regular way. When i push Volume + and Power botton it boots on Factory mode i think because it shows a black menu with three boot options (Recovey, Fastboot and Normal). If i pick Normal or Recovery mode the screen goes blank and starts to blink, if pick Fastboot shows a message that says Fastboot Mode On or something like that.
Click to expand...
Click to collapse
I'm no expert at unbricking. Does it show a screen to go to download mode when u press volume down+home+power button when turned off?
NoobInToto said:
I'm no expert at unbricking. Does it show a screen to go to download mode when u press volume down+home+power button when turned off?
Click to expand...
Click to collapse
Nope! I just try it, but screen lights up and starts to blink
Enviado desde mi ST25i usando Tapatalk 2

VS985 Bricked G3

I tried to flash SkyDragon with stock kernal, but it ended up soft bricking(?) my phone. I tried holding down the volume and power button to access custom recovery, but nothing happens. The screen is just a black screen with blinking red and blue lights when attempting to boot.
drobstacle said:
I tried to flash SkyDragon with stock kernal, but it ended up soft bricking(?) my phone. I tried holding down the volume and power button to access custom recovery, but nothing happens. The screen is just a black screen with blinking red and blue lights when attempting to boot.
Click to expand...
Click to collapse
Keep trying, do a battery pull and try again. Does adb recognize your phone? If so try try booting to recovery that way. If all else fails flash a stock kdz
BladeRunner said:
Keep trying, do a battery pull and try again. Does adb recognize your phone? If so try try booting to recovery that way. If all else fails flash a stock kdz
Click to expand...
Click to collapse
I'm going to do the KDZ method. When I'm in download mode, at the bottom it says VUSER B88 Modified and it stays 0%. Is there anything wrong with that?
Edit: Okay. I found that holding the power and volume button once gives me access to TWRP. Thank you.

Hardbrick Sony Xperia Tablet Z SGP321

Hello guys.
Hoping on your truly support. Have the problem, which cannot solve by myself.
Was trying to flash boot.img from CWM recovery 6.0.3.0 via fastboot. It flashes succesfully, but after rebooting the tablet it doesnt show any signs of life. Was trying EMMA for solving , Flashtool to change kernel, but when plug it through usb, it haven't launched and PC don't recognize any device connected. When i press Vol+ Vol- Power at the same time LED lights with white 3 times and that all.
Was using rooted Lollipop 5.1.1 with unlocked bootloader.
Is there any possibility to reanimate it or its finished totally.
Regards.
Edit.
Many thnx 2 Alok Bajaj for his solution:
Here's what you can do..
Press and hold the Power button and the Volume Up button for ten seconds until you see a white light flashing three times. While doing this somewhere around in 5 seconds you'll see white led flashing once, but keep on pressing those buttons till it flashes next three times.
After that your tablet will be turned Off.
You can put your device in flash mode and flash a new ROM from Xperia flash tool.
If you get the error "Unknown sources and USB debugging must me enable for flash mode, then your option can be to flash the ROM from fastboot.
Download a ROM (CyanogenMod or any with custom recovery).
Flash the boot.img via fastboot and reboot your device.
Once done you should see a led lit up while the device is booting (pink/magenta color in case of CyanogenMod).
Press the volume up/down button and you should be able to go to recovery mode.
From here you can recover your device easily
And before you do anything make sure you've charged your device well.
Good luck
Cheers mate!
hi,
thanks for the tutorial, I try it but*don`t see the second three blue blinks how long usually*takes to wait for them
Hi there! I think I have hardbricked my tablet (SGP321) too. The thing is, mine won't start, no matter what I press and do. If I press the power button it blinks white and if I press the UP button with it, it blinks three times. After that nothing happens. If I connect a USB to it, it just flickers first red and then green. And thats it.
I tried to flash [7.1] CyanogenMod 14 [POLLUX/POLLUX_WINDY][UNOFFICIAL] by CaHbKaUp and chose the Pollux Version from this thread http://forum.xda-developers.com/xperia-tablet-z/general/rom-cyanogenmod-14-t3496758. I also flashed the recommended GApps.
I whiped the sd-card in recovery (twrp) first and then flashed the new rom and GApps.
I think I chose the wrong version, maybe? I flashed my tablet once and I thought I could do it again, the same way as before. Guess I was wrong.
If there is anything I can do to get this back to work, please respond!
with regards
PsyPax
seems like no one is looking at this thread anymore.
edit: Solution found. forgot to unlock bootloader... ^^;
Hardbrick too
PsyPax said:
seems like no one is looking at this thread anymore.
edit: Solution found. forgot to unlock bootloader... ^^;
Click to expand...
Click to collapse
Just ran into the same problem. So there are stil people looking
Didn't know about the bootloader.
Has Android 5.1.1 Stock rom,
rooted it
installed XZDualrecovery from here:
https://forum.xda-developers.com/showthread.php?t=2261606
Then it showed up twrp and I flashed lineage-14.1-20170417-UNOFFICIAL-pollux.zip
ticked "reboot" and ??? nothing
So what are the steps now to get it running again?
baarbaar said:
So what are the steps now to get it running again?
Click to expand...
Click to collapse
Reflash device with Flashtool.
You can't flash custom ROMs with XZDR recovery.

Asus Memo Pad 7 ME176CX won't boot up, please help?

I uninstalled Xposed Framework and it said that i have to reboot tablet, which i did. Then, it got stuck on spinning dots on Asus logo on boot up. I could go to fastboot mode but option to Normal Boot didn't work, Recovery Mode option said Error, so, because it was 100% full battery, i just let it on spinning dots until battery drained. Then i let it charge for a while and when i pressef power button i saw only flashing black screen. No Asus logo, no fastboot, PC doesn't recognizes it. When i only push(not hold) power button it flashes, also when it is on charger. Only flashing black screen. Please help me, and sorry for long description.
darker246 said:
I uninstalled Xposed Framework and it said that i have to reboot tablet, which i did. Then, it got stuck on spinning dots on Asus logo on boot up. I could go to fastboot mode but option to Normal Boot didn't work, Recovery Mode option said Error, so, because it was 100% full battery, i just let it on spinning dots until battery drained. Then i let it charge for a while and when i pressef power button i saw only flashing black screen. No Asus logo, no fastboot, PC doesn't recognizes it. When i only push(not hold) power button it flashes, also when it is on charger. Only flashing black screen. Please help me, and sorry for long description.
Click to expand...
Click to collapse
Do you have stock files? If you do, you can try out my Unbricker tool (https://drive.google.com/open?id=0B6vSHGXxJIWmVjRVMlRSQW9HWWs), since you got fastboot working, all you need is stock rom.
RAZERZDAHACKER said:
Do you have stock files? If you do, you can try out my Unbricker tool (https://drive.google.com/open?id=0B6vSHGXxJIWmVjRVMlRSQW9HWWs), since you got fastboot working, all you need is stock rom.
Click to expand...
Click to collapse
Thanks, but no, i wrote tha i WAS able to get to the fastboot, now it is only flashing black, NO logo, NO fastboot, NO recovery
darker246 said:
Thanks, but no, i wrote tha i WAS able to get to the fastboot, now it is only flashing black, NO logo, NO fastboot, NO recovery
Click to expand...
Click to collapse
Actually you wrote that you COULD go into fastboot.
RAZERZDAHACKER said:
Actually you wrote that you COULD go into fastboot.
Click to expand...
Click to collapse
Yeah, my english is poor , i WAS able to get to fastboot, now there's only black screen, flashing black screen, like i see it is light, but it is bkack
darker246 said:
Yeah, my english is poor , i WAS able to get to fastboot, now there's only black screen, flashing black screen, like i see it is light, but it is bkack
Click to expand...
Click to collapse
And fastboot doesn't recognize it in any mode?
RAZERZDAHACKER said:
And fastboot doesn't recognize it in any mode?
Click to expand...
Click to collapse
Well, not sure what's your question but when i WAS able to get it to fastboot, i had option NORMAL BOOT, but it was unable to boot it "normally" cuz it stucks on Asus logo... then i had option to BOOT TO RECOVERY, but that option didn't work neither, it just said "Error" with Android guy holding red exclamation mark and then there was option to reboot fastboot mode and to turn it off, but now i CAN'T boot to fastboot, just black light on screen
darker246 said:
Well, not sure what's your question but when i WAS able to get it to fastboot, i had option NORMAL BOOT, but it was unable to boot it "normally" cuz it stucks on Asus logo... then i had option to BOOT TO RECOVERY, but that option didn't work neither, it just said "Error" with Android guy holding red exclamation mark and then there was option to reboot fastboot mode and to turn it off, but now i CAN'T boot to fastboot, just black light on screen
Click to expand...
Click to collapse
You'll need a bord replacement in my opinion.

Help to unbrick my phone or determine what failed so I can replace...

Hello everyone,
My phone is unable to turn on, I can see it vibrates when I pressed power button, the screen backlight is on too but nothing happens, the screen is still black, notification light didn't work too.
I can charge it.
I can boot to Fastboot mode and connect to the PC to reflash rom via MiFlash (But there is nothing on the screen, it's black on the time, I can see the back light is on too!).
Please help me fix it or please let me know what maybe failed so I can find components to replace...
I didn't drop it, and use it very carefully
Thank you very much!
dasklney said:
Hello everyone,
My phone is unable to turn on, I can see it vibrates when I pressed power button, the screen backlight is on too but nothing happens, the screen is still black, notification light didn't work too.
I can charge it.
I can boot to Fastboot mode and connect to the PC to reflash rom via MiFlash (But there is nothing on the screen, it's black on the time, I can see the back light is on too!).
Please help me fix it or please let me know what maybe failed so I can find components to replace...
I didn't drop it, and use it very carefully
Thank you very much!
Click to expand...
Click to collapse
Did you try reflashing developer ROMs? Have you unlocked it and flashed custom ROMs previously? Explain the issue in detail.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
PoseidonKing said:
Did you try reflashing developer ROMs? Have you unlocked it and flashed custom ROMs previously? Explain the issue in detail.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Click to expand...
Click to collapse
Hi,
Thank you for replying.
I've unlocked and flashed Xiaomi.eu MIUI 8 beta rom from the first time I got it (about 5 months ago), then I keep flashing Xiaomi.eu MIUI 8 beta everyweek.
Few days ago, I got a phone call, picked it up, the phone turned off, I turned it on, got another phone call, the phone then turned off again, and I couldn't turn it on...
I did try flash MIUI 8 stable rom, MIUI 7 stable rom, and MIUI 8 develop rom but it still can't boot, the screen is just black...
in fastboot mode the screen works properly or screen is black ?
mar.ur said:
in fastboot mode the screen works properly or screen is black ?
Click to expand...
Click to collapse
It's black at all mode, but there is still back light. In EDL mode, there is no back light.
There is black screen in edl mode with red led notification blinking , try to flash global dev or stable in edl mode and select clean all or flash all
mar.ur said:
There is black screen in edl mode with red led notification blinking , try to flash global dev or stable in edl mode and select clean all or flash all
Click to expand...
Click to collapse
Yes, I have tried to flash many rom in EDL mode.
7.6.3 stable.
8.1.6 stable.
6.12.15 dev.
6.12.22 dev.
Mi flash said "flash successful" but I still see black screen with back light when I press power button to turn the phone on...
I think it's hardware issue , but even with broken lcd , phone should boot to system , you should hear some sounds etc .
When you flashed rom , turn on phone and wait 10-20 minutes during the first boot , check what is on the screen via mi pc suit
mar.ur said:
I think it's hardware issue , but even with broken lcd , phone should boot to system , you should hear some sounds etc .
When you flashed rom , turn on phone and wait 10-20 minutes during the first boot , check what is on the screen via mi pc suit
Click to expand...
Click to collapse
It said connecting and 50% process and stay there forever...
After more than 1 week figure out what was wrong with my phone, I gave up, sent it back to the shop to repair (it's still under warranty but most online store will blame on users and charge for repairing it!), I didn't drop the phone, use it very carefully, even my old G3 which is 2 years old, known for a lot of suddenly dead, still working fine, it seems I will consider a lot when purchasing new Mi phone... and my next phone, for sure, won't be Xiaomi...
Flash 7.1.8
dasklney said:
Yes, I have tried to flash many rom in EDL mode.
7.6.3 stable.
8.1.6 stable.
6.12.15 dev.
6.12.22 dev.
Mi flash said "flash successful" but I still see black screen with back light when I press power button to turn the phone on...
Click to expand...
Click to collapse
Flash miui 7.1.8 fastboot rom via latest miflash,if u can try unlocking bootloader once again using the adb tools! ??

Categories

Resources