Related
I tried rooting my LG Optimus L3 E400, and it was successful, so I tried installing CM9 . . . I followed the instructions and it went well . . . but on the part where this robot thing with the blasting blue background appeared . . . it took a long time for it to boot . So I decided to remove the battery since it won't turn off . Then I when I turned it on, the robot booting logo continued . Then I tried turned on normally, but the graphics had a high saturation and the fonts weren't clear anymore . The Superuser was removed, but the ROM Manager was still there . Then I tried KDZ update thing but I always get this error ' Upgrade error WParam: 100, LParam: 6 ' . It said that it would make my phone boot normally, but it didn't . Now I can't charge, the USB logo won't appear, and ask me which USB connection mode to choose .
Got a possible solution!
kayeeah said:
I tried rooting my LG Optimus L3 E400, and it was successful, so I tried installing CM9 . . . I followed the instructions and it went well . . . but on the part where this robot thing with the blasting blue background appeared . . . it took a long time for it to boot . So I decided to remove the battery since it won't turn off . Then I when I turned it on, the robot booting logo continued . Then I tried turned on normally, but the graphics had a high saturation and the fonts weren't clear anymore . The Superuser was removed, but the ROM Manager was still there . Then I tried KDZ update thing but I always get this error ' Upgrade error WParam: 100, LParam: 6 ' . It said that it would make my phone boot normally, but it didn't . Now I can't charge, the USB logo won't appear, and ask me which USB connection mode to choose .
Click to expand...
Click to collapse
Well , i got the sam problem at the moment , and i've been searching the internet for days now to find how to fix it... since i'm not very experienced i can't just go to modifying something in my phone but completely change the rom. With my previous experience with an LG P500 i've found a very good solution using KDZ installer so i've jut googled KDZ LG L3 and apparently it will work on L3 too ... Now i dont know if i'm allowed to post a link , but anyway even with ban it will be worthy if it helps you. The LINK* wow i'm new so i cant post outside links* or if it doesn't work (this is the direct link) : (lg-phones.org/lg-optimus-l3-v10d-firmware-download.html) put www before.
Good Luck! I'm trying this method on my own right now.
mircea98ro said:
Well , i got the sam problem at the moment , and i've been searching the internet for days now to find how to fix it... since i'm not very experienced i can't just go to modifying something in my phone but completely change the rom. With my previous experience with an LG P500 i've found a very good solution using KDZ installer so i've jut googled KDZ LG L3 and apparently it will work on L3 too ... Now i dont know if i'm allowed to post a link , but anyway even with ban it will be worthy if it helps you. The LINK* wow i'm new so i cant post outside links* or if it doesn't work (this is the direct link) : (lg-phones.org/lg-optimus-l3-v10d-firmware-download.html) put www before.
Good Luck! I'm trying this method on my own right now.
Click to expand...
Click to collapse
Uhm, I don't quite understand the instructions . . . can you help me out ?
Is it your USB cable that's broken? Can your computer still detect the phone? And most importantly can you still turn the phone on?
Bloodscythe said:
Is it your USB cable that's broken? Can your computer still detect the phone? And most importantly can you still turn the phone on?
Click to expand...
Click to collapse
No, my friend had an LG Optimus L5 . . . she borrowed my charger yesterday and it charged . . . My phone can't connect to the computer . . . and yes It can turn on . . . but the LG start up logo is broken . . . The part where there's a pink and violet wave . . . it's like a broken television signal .
Unless you can connect your phone to the computer, it'll be really tough to fix... Okay, are you able to launch these things: 1. Emergency Mode: Make sure phone is off. Hold Volume up + down + power button. You should get a yellow screen with the words emergency mode on it.
2. Can you still run Clockworkmod recovery?
3. Try a factory reset. Volume up + Home button + Power button.
This ones tricky if you have CWM installed. Hold down the three buttons until the vibration comes along and quickly let go. It might take a few tries.
Bloodscythe said:
Unless you can connect your phone to the computer, it'll be really tough to fix... Okay, are you able to launch these things: 1. Emergency Mode: Make sure phone is off. Hold Volume up + down + power button. You should get a yellow screen with the words emergency mode on it.
2. Can you still run Clockworkmod recovery?
3. Try a factory reset. Volume up + Home button + Power button.
This ones tricky if you have CWM installed. Hold down the three buttons until the vibration comes along and quickly let go. It might take a few tries.
Click to expand...
Click to collapse
I can make it go to Emergency Mode . . . and yes, I can still run Clockworkmod recovery excpet for Factory Reset . When I press Volume up + Home Button + Power Button . . . it just flashes then turns off . How do you hold down three buttons ? is it Volume buttons + Home button + Power button ?
kayeeah said:
I can make it go to Emergency Mode . . . and yes, I can still run Clockworkmod recovery excpet for Factory Reset . When I press Volume up + Home Button + Power Button . . . it just flashes then turns off . How do you hold down three buttons ? is it Volume buttons + Home button + Power button ?
Click to expand...
Click to collapse
If you can still make it into emergency mode and CWM, that's good. Okay, first, go into CWM and WIPE EVERYTHING. Data, cache, dalvik cache. Wipe them all. Then, put your phone into emergency mode. Try to connect your phone to your computer and try to use the Kdz flasher again. IF this fails then download this:
http://www.shabbypenguin.com/OUDstuff/LG-E400/stockrom+.zip
And flash it in CWM. It's probably in a different country then yours but it's better than nothing.
Bloodscythe said:
If you can still make it into emergency mode and CWM, that's good. Okay, first, go into CWM and WIPE EVERYTHING. Data, cache, dalvik cache. Wipe them all. Then, put your phone into emergency mode. Try to connect your phone to your computer and try to use the Kdz flasher again. IF this fails then download this:
And flash it in CWM. It's probably in a different country then yours but it's better than nothing.
Click to expand...
Click to collapse
After wiping them all, will I reboot ?
kayeeah said:
After wiping them all, will I reboot ?
Click to expand...
Click to collapse
No. Turn off your phone then launch emergency mode.
Bloodscythe said:
No. Turn off your phone then launch emergency mode.
Click to expand...
Click to collapse
How do you use stockrom+ ?
kayeeah said:
How do you use stockrom+ ?
Click to expand...
Click to collapse
That one is kinda tough. Unless you know how to use ADB there's not really a way to get it on to your phone. Its like the CM9 installation. Just install exactly the same way as you did for CM9. Try fixing your phone with kdz flasher first. Don't forget to put in 3QCT and Emergency modes first.
Bloodscythe said:
That one is kinda tough. Unless you know how to use ADB there's not really a way to get it on to your phone. Its like the CM9 installation. Just install exactly the same way as you did for CM9. Try fixing your phone with kdz flasher first. Don't forget to put in 3QCT and Emergency modes first.
Click to expand...
Click to collapse
I clicked on Launch Software Update and it didn't work ):
Actually, are you using the CM9 rom or did you restore a backup? Also, try mounting your phone in CWM, connect your phone to computer and see if your computer picks up anything. What does it say when you launch software update anyway?
Bloodscythe said:
Actually, are you using the CM9 rom or did you restore a backup? Also, try mounting your phone in CWM, connect your phone to computer and see if your computer picks up anything. What does it say when you launch software update anyway?
Click to expand...
Click to collapse
Yes, and I dunno how to mount CWM . . . and It says the same error . . . Param: 6 . . .
In CWM, there is a menu named mounts and storage. In there will be a sub menu called mount USB storage. Go into it. You'll see the only option in there is BACK. At this point, connect phone to computer. See if you have connection. I have to ask, do you know how to use KDZ flasher. Please tell me step by step as to what you did.
Hi!
My LG L3 E400 is bricked. When i try to turn it on,it vibrates and the LG logo appears and thats it. Hard reset,recovery mode or anything else is not possible to do. The only thing i can do is emergency mode. I was trying with software update kdz with stock .kdz files (V10G_00.kdz and V10A_00.kdz) but i got an error (Wparam 100 Lparam 2) Same thing on two different computers (Xp and 7,drivers installed...).
Is there any other way to make him alive?
Sorry for my bad English. :good:
kayeeah said:
After wiping them all, will I reboot ?
Click to expand...
Click to collapse
I cant get in clockworkmod... What should I do?
Hello i have a lg e400r and iam try to flash firmware v10N_00.kdz with kdz updater
and i hqve problems i cant flash firmware the kdz show me error on 99percent the phone reatarts and it stays on lg logo and a white screen dont boot normaly
i cant get to cmw and i cant do a hard reset but the phone it turn on
what i need to do to fix it??
Anyone an idea.?
Samsung S3 i9300 restart on samsung logo and not going in download mode or recvery mode... i give u solution. i tested in many sets....
switch off ur mobile and then plug usb in and connect ur set with pc ,
then use volume up + home + power for recover mode.
now ur in recovery mode option then select wipe data,
now restart ur set.... now ur set 100000% ok
i teste in many sets...its working well....... so enjoy frnds
mobilecare_786 said:
Samsung S3 i9300 restart on samsung logo and not going in download mode or recvery mode... i give u solution. i tested in many sets....
switch off ur mobile and then plug usb in and connect ur set with pc ,
then use volume up + home + power for recover mode.
now ur in recovery mode option then select wipe data,
now restart ur set.... now ur set 100000% ok
i teste in many sets...its working well....... so enjoy frnds
Click to expand...
Click to collapse
EASIER METHOD remove battery replace and boot to recovery mode .
jje
i don't understand why to connect to a pc when you can just remove and insert battery to enter recovery mode as already stated above!
dear frnd many time its keep restarting and not going in recovery mode... so i give that solution i hope you understand now what i want to say
mobilecare_786 said:
dear frnd many time its keep restarting and not going in recovery mode... so i give that solution i hope you understand now what i want to say
Click to expand...
Click to collapse
Probable user error not know how to get recovery mode .
volume up + home + power for recover mode.
jje
everyone know how to get in recovery mode.... but its always restart when android logo comes and its also restart when its ask to go in download mde..... now u understand bro....
sriram231092 said:
i don't understand why to connect to a pc when you can just remove and insert battery to enter recovery mode as already stated above!
Click to expand...
Click to collapse
everyone know how to get in recovery mode.... but its always restart when android logo comes and its also restart when its ask to go in download mde..... now u understand bro....
you need to let go of the power button when the logo comes up
arafa
i9300 constantly auto restartying pls help me very urgent
mobilecare_786 said:
Samsung S3 i9300 restart on samsung logo and not going in download mode or recvery mode... i give u solution. i tested in many sets....
switch off ur mobile and then plug usb in and connect ur set with pc ,
then use volume up + home + power for recover mode.
now ur in recovery mode option then select wipe data,
now restart ur set.... now ur set 100000% ok
i teste in many sets...its working well....... so enjoy frnds
Click to expand...
Click to collapse
Im done what you said. But. After that it is same as before...now what to do?
I recently flash my Samsung Galaxy S3 to MIUI ROM (miui_i9300_3.6.21_92f38a8c3a_4.1), it is able to flash successfully. However, when in the middle of setting up the phone, the phone hang and auto power off by itself. I unable to power up after that.
I think my phone previous is the stock ROM ICS if not wrong.
I can't even go into download mode by pressing and holding Home, Vol down and Power button. I have also try remove battery and put it back and still can't go to download mode.
Anyone have any solution to recover my phone?
Btw, my phone already over the warranty period, so really appreciate if anyone can help me on this. Thanks!
Charge battery / replace battery first .
#
Worth trying a USB recovery jig to access download mode .
jje
JJEgan said:
Charge battery / replace battery first .
#
Worth trying a USB recovery jig to access download mode .
jje
Click to expand...
Click to collapse
Any special steps for using USB recovery jig?
Push it in USB slot and download mode comes up or it fails .
jje
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Under World said:
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Click to expand...
Click to collapse
TRY
Code:
adb reboot bootloader
command
Under World said:
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Click to expand...
Click to collapse
You can try that but cant guarantee . No one else tried before
Under World said:
Hello guyz ,
first of all i had a gr5 KII-L21 was running perfect after that my car charger made aproblem to my phone and caused power button isn't working so i used to power it from recovery ( twrp )by connecting usb cable with Vol up and reboot system .
last night my rear camera stopped working so i decided to flash stock ROM
that was a great mistake because my phone got into boot loop and just can get into recovery ( stock recovery) but not fastboot cuz my power button is broken .
is there any way to flash it i tried alot LAST night with no chance .
i did that with samsung before by making a usb jig
does huawei have some thing like that
thanks in advance.
Click to expand...
Click to collapse
I hope that dint worked for u as u dint replied for this thread since.. kindly get the power button replaced instead of messing with board.
Hi everyone ! I appreciate this forum very much since we do help each other here. So thanks in advance !
I've recently got a Samsung GS7 which was a carrier operator based system (Orange France) and recently, it gave me a bootloader error. I did reflash the bootloader with a newer version and also the system (Android 7.0 FTM) via Odin, all was working perfectly till I downloaded Antutu and tried the benchmarking, when the system went to the CPU multithread, the phone did reboot and when it started, I uninstalled that application to avoid problems. Then, the phone didn't want to reboot afterwhile.
I'm blocked with a black screen and all keys combination doesn't work.
I really need help. It's a G930F. If you need any information; just ask.
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Teddy Lo said:
Hi , did you flashed 4 files on Odin ? and Did you tried to flash with Samsung Smart Swich ?
https://www.youtube.com/watch?v=9QhJngOuLQ4
Click to expand...
Click to collapse
Yes, I did flash all 4 files (BL, CSC, AP and something else as described in odin).
I did try the Smart Switch recuperation feature but it didn't gave me any option, then after flashing with Odin, I did retry once the phone has completed his turn on ignition, it just gave me a feature to upgrade the phone.
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Teddy Lo said:
The Emergency Software Recovery and Initialization you need manualy to do like in that video , first you need to put your phone in download mode .
Because you say that screen is black hold just power button for about 10 second to make sure your device is off , then Hold vol - Home and Power to enter in Download mode for bout 7 second and then release power button , wait just litle and then press vol + like for odin flash and then try The Emergency Software Recovery and Initialization. If it Doesn't work try with old version of firmware to flash , if you are able after that to enter in to recovery Wipe Cache Partition and Reboot your phone.
Click to expand...
Click to collapse
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
ChupaXL said:
The Emergency Software Recovery has been removed from Smart Switch. Sorry to say that but I can't access it.
Also, I can't enter the download mode or the recovery mode. I'll wait until the battery goes empty, and then, will try to charge it to see if it changes anything.
Click to expand...
Click to collapse
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Teddy Lo said:
You can try that , but try this , press and hold just power button and plug USB on PC and your phone to see if is your device recognized as Exynos 7422 for example if it is then your Bootloader is dead .
Click to expand...
Click to collapse
I did try that but it don't give me anything. The device is not recognized.
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
I think it may be a software issue, the battery was working fine three days ago, I was working with the phone for about 5 - 6 hours without charging, it wasn't a battery problem.
Tomorrow, if letting my phone discharge and then charge doesn't work, I'll put it in charge for 3 hours.
Thanks !
Teddy Lo said:
Strange , maybe your battery is dead or you have phone with hardware issue : / . Try to put him in charger for about 3 hours .
Click to expand...
Click to collapse
The phone worked after letting all the juice go empty and recharge it for a couple of hours. It is working now perfectly.
Thanks
I'm glad to hear that
Teddy Lo said:
I'm glad to hear that
Click to expand...
Click to collapse
It just did it again, I was downloading a file and then, the phone did make like a screen cracked and it went off another time.
Is it a software issue or a hardware issue ?
I'm not sure first what file you was downloading and how you mean like screen cracked ? Colors or what ? ( Try to do Factory Reset and do Wipe Cache Partition if the problem comes again probably you have device with hardware issue .
Here is the screenshot of my software system infos.
Also, I get a small line with grey pixels like the old TVs