Guys my phone kenzo vibrate isnt working anymore. Not in rom. Not in recovery not for keyboard or calling
Its still in warranty. What should i do?
Motor is dead? How much time does it need to change it?
The phone makes a clicky noise when its shaked. It's normal?
Bumpp
Related
I am kind of hoping that I got a defective device and that vibration isn't a general X10 problem. How strongly do your phones vibrate compared to others? I could barely feel mine even when I hold it in my hands (and I'm not talking about the haptic feedback when typing, I am talking about when receiving phone calls and text messages, and all the settings are correct).
Can anybody help me out here...?
Peetahzee said:
Can anybody help me out here...?
Click to expand...
Click to collapse
i find no problem here with my phone's vibration. its quite noticeable.
Anybody else that can confirm my problem...?
MY screen backlight will not turn off. It goes from dim to bright, every few seconds. I cannot get it to turn completely off either, when i hit the endcall key the screen goes black then it comes right back on by itslef. I have no programs running in the background. I have soft reset the phone, even taking the battery out. The screen goes off fine while charging. I have also tried cleanRAM on level 3, with no sucess. I dont have any special ROM, just CHT2 and various mods. Any help please!
I know you probably do not want to hear this, but if you have checked your display settings and the are all good. Then it is probably time for a hard reset.
yea, i was starting to mentally prepare for that now. the problem is seeming to "chill out" alittle. its not doing it as bad as it was yesterday. i thought it fixed itself for awhile today, then it started doing it again. it drains my battery so fast when that happens. its like a pulsing from dim to bright until i push any button or on the screen. thanks for your help. if you think of anything else let me know.
same problem
Hi!
I have a same problem!!!! I am using energy rom...But I think it does not matters. I already did hard reset and it didnt help!!!! And there is nothing wrong with buttons, becouse, when I push them they normally light up, but in this process u described( totally same in my phone ) Thew display just go bach to light, but lights on buttons not...So there isnt problem with bad connection or so.... I am really in **** with this And it wont be better man believe me...Got it almost week...sometimes its better but..... ANYONE PLS HELP!!!
airhuri said:
Hi!
I have a same problem!!!! I am using energy rom...But I think it does not matters. I already did hard reset and it didnt help!!!! And there is nothing wrong with buttons, becouse, when I push them they normally light up, but in this process u described( totally same in my phone ) Thew display just go bach to light, but lights on buttons not...So there isnt problem with bad connection or so.... I am really in **** with this And it wont be better man believe me...Got it almost week...sometimes its better but..... ANYONE PLS HELP!!!
Click to expand...
Click to collapse
If a hard reset didn't help you, then you have a hardware issue for sure.
i've noticed on mine, if it starts acting up. I put it on the charger for a sec. then it acts normal after i disconnect it. Do you think this could be from water damage? I havent gotten any water on my phone that i know of, though.
tippingvan said:
i've noticed on mine, if it starts acting up. I put it on the charger for a sec. then it acts normal after i disconnect it. Do you think this could be from water damage? I havent gotten any water on my phone that i know of, though.
Click to expand...
Click to collapse
Kinda sounds like you may not be getting correct voltage to your screen or out of your battery. I say this cause you mentioned plugging in your charger helps for a little while. Have you had a good look at your battery pins on your HD2?
There is nothing wrong with pins...Today my phone work better....But still sometimes keep screen on...what a mystery...
did a hard reset, nothing changed. called tmobile, got a replacement coming, no charge. guess thats the only way.
tippingvan said:
did a hard reset, nothing changed. called tmobile, got a replacement coming, no charge. guess thats the only way.
Click to expand...
Click to collapse
So, that sounds like a HW problem, lucky enough to get free replacement
unfortuntly it wont work for me (( Cause i did HSPL and stuff..... But I noticed, that sometimes when i start to charge my phone it actually gets better for some time... Any thoughts?
Or can u pls ask the t-mobile for me where was the prolem in your phone? Thanks..
airhuri said:
unfortuntly it wont work for me (( Cause i did HSPL and stuff..... But I noticed, that sometimes when i start to charge my phone it actually gets better for some time... Any thoughts?
Or can u pls ask the t-mobile for me where was the prolem in your phone? Thanks..
Click to expand...
Click to collapse
You can remove HSPL and revert it back to SPL by using the HSPL utility, remember it asked which version you want to install. Just click on the link in my sig for HSPL. and download it. Then rum the utility and select the correct SPL version for your current ROM.
Or flash the stock ROM for your HD2 via SD card. Go to the link below to learn how.
http://forum.xda-developers.com/showthread.php?t=681317
Sorry if I'm creating a new thread for this topic but i have searched and i still cannot find an answer to my problem. When I'm in a dark room, sometimes even not too dark, if a place a call my phone screen will go off, like to sleep mode, and will never wake up again until either i go to a brighter place or I hook it up to the power (usb cable), has anyone experienced this? and please if someone knows what's going and how to solve this issue, thanks so much for your help!!
I have the same problem too ... but sometime it just light up again directly after I finish the call. I think it has something to do with the ROM itself coz a friend of mine has installed the Incredible S ROM and it works perfectly.
I'll try on my HD2 and let u know .....
oh.. by the way Im using Nuxes One ROM
Haisi said:
I have the same problem too ... but sometime it just light up again directly after I finish the call. I think it has something to do with the ROM itself coz a friend of mine has installed the Incredible S ROM and it works perfectly.
I'll try on my HD2 and let u know .....
oh.. by the way Im using Nuxes One ROM
Click to expand...
Click to collapse
rhidalgo1973 said:
Sorry if I'm creating a new thread for this topic but i have searched and i still cannot find an answer to my problem. When I'm in a dark room, sometimes even not too dark, if a place a call my phone screen will go off, like to sleep mode, and will never wake up again until either i go to a brighter place or I hook it up to the power (usb cable), has anyone experienced this? and please if someone knows what's going and how to solve this issue, thanks so much for your help!!
Click to expand...
Click to collapse
It is also possible to be a faulty light sensor or even some dirt in front of it, right underneath touchscreen glass!
First of all, you should flash a stock ROM and see what happen: if it's not OK. then you have a hardware problem!
dirt between screen and sensor caused the same to me, I've cleaned it and now is ok
My i9100 suddenly stopped vibrating. No haptic feed back, no sms vibrate, no call vibrate. No *#0*# vibration...
I had lighting rom, installed stock rom and nothing, wont vibrate again.
Anyone had this kind of trouble? Any other idea than sending it back? (I got this abroad...)
Thanks in advance
Factory reset will solve it had this happen to me once after flashing a rom and a factory reset bought haptic feedback back.
Sent from my GT-I9100 using Tapatalk
Didn't work, I had tried that.
But weird stuff:
After I installed a Brazilian stock rom, I was fully charging it so I could root it again. Accidentally it fell for about 2 feet high.
Vibration is back on. (probably a HARDWARE failure, a jam of some kind) Really weird. (I do use a silicon case, my i9100 is without a scratch, I wonder what will happen from now on...)
It was the first time I see a FALL fix a phone though.
Well. It went on and off again. Probably faulty hardware.
Sent from my GT-I9100 using XDA App
I have had my Verizon Note 2 for about a month now, and about 2 days ago i read that the processor has Vulnerabilities and mailware problems samusing is trying to fix but about a week ago i went to use my quick glance and my direct call and it wasnt working and when someone calls me i put it up to my ear the screen goes black as it should but then its stuck at the black screen i hit all the buttons cant get to the phone call if i wanted to put it on speaker or even just check a txt message i cant do anything until that person hangs up. The only way i am able to check my txt messages and stuff while on the phone is if i dont put it up to my ear.. so i restarted phone as we all would assume this would fix it well it didnt, so then i did a Factory reset thinking that would just put it back to complete stock and fix it well turns out that didnt work. My phone has never been rooted or anything and never will be. Im running Android 4.1.1 If anyone has any idea how i can fix this it would be gladly appreciated i love the motion features. Also i did the Gyroscope calibration and it didn't make any difference, my proximity sensor is on and glowing red just doesnt work like i said.
Thanks, Stephen
Hawksfan88 said:
I have had my Verizon Note 2 for about a month now, and about 2 days ago i read that the processor has Vulnerabilities and mailware problems samusing is trying to fix but about a week ago i went to use my quick glance and my direct call and it wasnt working and when someone calls me i put it up to my ear the screen goes black as it should but then its stuck at the black screen i hit all the buttons cant get to the phone call if i wanted to put it on speaker or even just check a txt message i cant do anything until that person hangs up. The only way i am able to check my txt messages and stuff while on the phone is if i dont put it up to my ear.. so i restarted phone as we all would assume this would fix it well it didnt, so then i did a Factory reset thinking that would just put it back to complete stock and fix it well turns out that didnt work. My phone has never been rooted or anything and never will be. Im running Android 4.1.1 If anyone has any idea how i can fix this it would be gladly appreciated i love the motion features. Also i did the Gyroscope calibration and it didn't make any difference, my proximity sensor is on and glowing red just doesnt work like i said.
Thanks, Stephen
Click to expand...
Click to collapse
That exploit that you are referring to has nothing to do with your issue... And the proximity sensor does not light up as that is the LED notification light. I have this issue from time to time too and it's just that the sensor is not doing it's job properly but if you just simply hit the home button or power button real quick the screen will turn on. Other than that you may want to check some of your settings... Turn off your "motion" settings and see if that takes care of your issue then find out which one is causing the problem...
The quick glance used to work without any problems at all and i liked that, then all of a sudden one day it just decides not to work and it hasn't worked in a week now, i turned my motion off and when im in a phone call it still locked up at the phone screen i cant do anything until they hang up ive gone through the settings multiple times and nothing, i think imma go to verizon today and ***** about it
Hawksfan88 said:
The quick glance used to work without any problems at all and i liked that, then all of a sudden one day it just decides not to work and it hasn't worked in a week now, i turned my motion off and when im in a phone call it still locked up at the phone screen i cant do anything until they hang up ive gone through the settings multiple times and nothing, i think imma go to verizon today and ***** about it
Click to expand...
Click to collapse
Ya something does not sound right... Do you have a screen protector on your Note 2 that is covering the sensors?
shojus said:
Ya something does not sound right... Do you have a screen protector on your Note 2 that is covering the sensors?
Click to expand...
Click to collapse
No screen protector or anything no case either, my girlfriend yanked the battery while it was on one day idk if that has anything to do with it or not cause after that happened seemed like it didn't work
shojus said:
That exploit that you are referring to has nothing to do with your issue... And the proximity sensor does not light up as that is the LED notification light. I have this issue from time to time too and it's just that the sensor is not doing it's job properly but if you just simply hit the home button or power button real quick the screen will turn on. Other than that you may want to check some of your settings... Turn off your "motion" settings and see if that takes care of your issue then find out which one is causing the problem...
Click to expand...
Click to collapse
actually the proximity sensor DOES light up, it's a very faint red light and it's the left one of the two little holes to the _right_ of the phone speaker, the notification LED is on the left of the phone speaker. This light turns on when in a phone call to indicate that the sensor has been activated.