Okay so I was about install this MIUI.eu 7.3.30 . So first I edl flash the gloval dev 7.3.2, and then flash the MIUI.EU ROM via TWRP with a clean install (I wipe everything before install the ROM). But, this one bug kinda bothering me, the "Reboot to recovery" button in the Updater app didnt work. It just does a regular reboot. Anyone can help me with this?
New firmwares have a bug...
You can only manually go to twrp
Perhaps it is not a bug, but a deliberate choice.
In my experience once you booted the rom and Manually boot TWRP with buttons at least once. Rebooting to TWRP from updater and advance reboot menus work as expected again.
Related
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
Hello,
I had already a custom ROM on my phone (AOSP Extended). When I opened TWRP and wiped everything (including system, data and internal), TWRP couldn't install my ROM because of some error code 7 (but that's not the main problem here). When I opened fastboot on my phone, I installed twrp into my phone using fastboot. The TWRP did boot up just fine. But when I clicked "install" and selected the custom ROM, TWRP simply closes, reboots the phone and TWRP starts again asking me if I want to allow changes. I noticed that this isn't because of my custom ROM. I tried also other things such as Gapps and TWRP does the same thing.. I don't know how to fix this. Can you please help? Thank you!
Hi guys,
I'm using Phh's rom v9 in my Huawei Mate 10 Pro (BLA-L09).
Everythings was ok until I decided to proceed to a factory reset from the Android menu (Settings>System>Factory rest).
Now I'm stuck on the Android boot screen. I can see the "android" text with a fading effect, but it doesn't boot (the fading animation works).
When I wait 5 minutes, the device reboots to eRecovery screen, where I can only choose between "Download latest version and recovery", "Reboot", "Shutdown".
I can still go to fasboot mode and I can still boot on TWRP too (I'm using this version of TWRP).
I've tried to reflash the rom (Phh's treble version 9), but i've still the same problem.
When I try to flash another rom (for exemple LOS 15.1, from here, or Phh's treble version 12), I got another problem: bootloop.
When I try to do a facroty reset from TWRP, same problem: stuck in Android boot logo.
Do you know a trick to solve this problem?
Should I go bad to stock recovery to proceed to a factory reset?
Should I go back to stock Huawei rom?
Should I buy FunckyHuawei credit to use their unbrick tool?
Should I stop hacking my phone like I'm a pro?
Thanks for your help!
iBen68 said:
Hi guys,
I'm using Phh's rom v9 in my Huawei Mate 10 Pro (BLA-L09).
Everythings was ok until I decided to proceed to a factory reset from the Android menu (Settings>System>Factory rest).
Now I'm stuck on the Android boot screen. I can see the "android" text with a fading effect, but it doesn't boot (the fading animation works).
When I wait 5 minutes, the device reboots to eRecovery screen, where I can only choose between "Download latest version and recovery", "Reboot", "Shutdown".
I can still go to fasboot mode and I can still boot on TWRP too (I'm using this version of TWRP).
I've tried to reflash the rom (Phh's treble version 9), but i've still the same problem.
When I try to flash another rom (for exemple LOS 15.1, from here, or Phh's treble version 12), I got another problem: bootloop.
When I try to do a facroty reset from TWRP, same problem: stuck in Android boot logo.
Do you know a trick to solve this problem?
Should I go bad to stock recovery to proceed to a factory reset?
Should I go back to stock Huawei rom?
Should I buy FunckyHuawei credit to use their unbrick tool?
Should I stop hacking my phone like I'm a pro?
Thanks for your help!
Click to expand...
Click to collapse
use stock recovery to factory reset as of now the twrp for our device is not really functional yet
flash stock recovery then factory reset using that then try to boot if still does not boot reflash any rom system.img
ngoralph said:
use stock recovery to factory reset as of now the twrp for our device is not really functional yet
flash stock recovery then factory reset using that then try to boot if still does not boot reflash any rom system.img
Click to expand...
Click to collapse
Thank you for your answere. How do I proceed to use stock recovery?
I guess I have to find the stock recovery file and flash it with this command:
Code:
fastboot flash recovery_ramdisk stockfile.img
Am I right?
iBen68 said:
Thank you for your answere. How do I proceed to use stock recovery?
I guess I have to find the stock recovery file and flash it with this command:
Code:
fastboot flash recovery_ramdisk stockfile.img
Am I right?
Click to expand...
Click to collapse
Yes, that's correct.
Here's stock recovery: https://mega.nz/#!RTAwwRaD!vX6CCS4jJ4RnARMz5_lAg_O5Wn_-X25qKVp3hhAc_AQ
(It's from C636B134 but shouldn't matter)
Ok thank you, I can now boot on the Phh Treble v9 rom, I'm no more stuck on Android bootscreen.
I've tried other roms again (Phh treble v12 and LOS), still doesn't works, I can only boo on Phh's rom v9.
But I guess it's part of another problem.
Thank you!
iBen68 said:
Ok thank you, I can now boot on the Phh Treble v9 rom, I'm no more stuck on Android bootscreen.
I've tried other roms again (Phh treble v12 and LOS), still doesn't works, I can only boo on Phh's rom v9.
But I guess it's part of another problem.
Thank you!
Click to expand...
Click to collapse
Weird.
Did you try flashing SYSTEM.img from LOS and then Factory Reset from Stock recovery?
Yes. Here are the steps I've followed:
Downloaded LOS rom
Plugged my phone on usb
fastboot flash system sysyem_LOS.img
fasboot reboot
The phone bootloops 4 or 5 times
Factory reset asked after bootloops -> accepted
After factory reset, the phone reboots to the screen with "Download latest version and recovery", "Reboot", "Shutdown".
Maybe am I doing something wrong?
Should I run Factory Reset manually before bootloops?
iBen68 said:
Yes. Here are the steps I've followed:
Downloaded LOS rom
Plugged my phone on usb
fastboot flash system sysyem_LOS.img
fasboot reboot
The phone bootloops 4 or 5 times
Factory reset asked after bootloops -> accepted
After factory reset, the phone reboots to the screen with "Download latest version and recovery", "Reboot", "Shutdown".
Maybe am I doing something wrong?
Should I run Factory Reset manually before bootloops?
Click to expand...
Click to collapse
Yeah, go to recovery right after flashing and factory reset.
I've tried again with LOS and Treble v12, same problem. The only one booting well is still Treble v9.
Hi again guys,
I get stuck on the Android boot logo again. I was using AOSP Treble v9, and decided to go back to stock version as explained on this guide :
https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
It did not works, I get stuck on the Android boot logo.
I've tried to go back on AOSP Treble v9 by flashing the recovery_ramdisk to the original one and flashing the v9 AOSP Treble, but I still get stuck on the Android boot logo.
Any idea how to boot on any Android version?
Thanks.
Hi guys so I managed to get root and install twrp but I can't install a custom Rom,
I get no errors or anything during install I've tried lineageos 16 but every time insall and reboot I just get the boot screen for about 15 mins then it reboots to twrp.
The first time I tried it worked but I forgot to install open gapps so I tried again with gapps now every time I've tried flashing I get the same problem long boot screen then reboot to twrp.
I've even tried just flashing the Rom again but that doesn't work now also tried other roms that should work but no luck. I have my stock Rom backed up so I'm not stuck anywhere just want to get custom roms work I know it's probably something simple I'm doing wrong.
Reflash stock android 7 firmware.. Then install twrp again.. Make sure before flashing any rom, you have wiped system, data and cache.. Use gapps from http://opengapps.org
mcjv2015 said:
Hi guys so I managed to get root and install twrp but I can't install a custom Rom,
I get no errors or anything during install I've tried lineageos 16 but every time insall and reboot I just get the boot screen for about 15 mins then it reboots to twrp.
The first time I tried it worked but I forgot to install open gapps so I tried again with gapps now every time I've tried flashing I get the same problem long boot screen then reboot to twrp.
I've even tried just flashing the Rom again but that doesn't work now also tried other roms that should work but no luck. I have my stock Rom backed up so I'm not stuck anywhere just want to get custom roms work I know it's probably something simple I'm doing wrong.
Click to expand...
Click to collapse
Go into TWRP and delete all without USB Storage
go back to the first Page of TWRP
click restart click recovery and swipe to do restart
now check the never show screen bla bla
press select language and choose yours
swipe to go into TWRP
now click mount and there MTP must be enable
connect to pc and open phone directory...there should only be a Folder calld TWRP
now copy paste the Firmware you want...like Lineageos 16 with gapps for 9.0 and dont forget the Magisk 20.3
dont forget the Magisk 20.3
dont forget that **** Magisk 20.3!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
instal Fw, then gapps and after then magisk
delete dalvik+cache
restart...fingerscross
maybe tada
Hey you smart people
im driving NUTS
I installed a completely fresh new A11 stock rom and I lost my custom recovery.
This is my install procedere:
(fastboot)
-set SLOT B and install twrp
-then boot to TWRP recovery and Flash TWRP.zip again
-reboot to twrp recovery
-wipe Cache,system,Data
-flash Rom A11 STOCK 12.0.3.0
-flash SHRP
-reboot in SHRP again
Set SLOT A!
-Format Data
-Reboot to System
Boot into recovery. Nothing! Stuck on Adndroid ONE boot screen
What i'm doing wrong? Please help
Did you installed on slot "B" and set active on "A"?
This is the error, i think.
I thought Rom is always installed in the inactive slot. Netherles, where's the recovery gone..?
After all kind of flashes now SHRP is installed on slot A and image is installed on slot A.
And now I'm stuck on ne MI Logo and got bootloop.
Latest magisk is installed
EDIT:
Wiping Data + System
Boot into image possible! BUT no boot into recovery -.-
im really newbie in this case. But the latest stock rom A11 works with TWRP / SHRP and others? if anything goes wrong, just try flash stock withouth anything and wait a specialist user help.
Praeco said:
im really newbie in this case. But the latest stock rom A11 works with TWRP / SHRP and others? if anything goes wrong, just try flash stock withouth anything and wait a specialist user help.
Click to expand...
Click to collapse
Flashing Stock rom works. Latest TWRP and SHRP should both work on A11.
But i just dont get rom AND recovery to work properly on the same slot :/
EDIT:
Okay. I got some help in Telegram!
TWRP is NOT ready for permanent install!! <----
I did everything now this way:
1. first flash boot twrp in fastboot
2. install everything a need
3. back to fastboot and flash boot.img
thats the way for now
Glad that you found a way! now im searching how to downgrade stock 10 to 9 withoutg losing sensors. But im very newbie and need a guide like to explaind like im five.