Good morning
As by title I am looking for the original rom, better if one modified for the irulu Expro X1s 8 inches. The tablet stays fixed on the bootloader but gets into recovery, the problem occurs with a hard reset with low battery. I do not have S / N to download it from the official site.
Thanks a lot for any help and excuse the bad English.
Hi everyone, after many searches I managed to find the firmware for this device but I can not install it via ADB sideload as indicated by Irulu's guides. Can someone help me ? The error found is Signature verification faild. IUSB debug does not think it is enabled
Related
Hi. I have been searching rom to mpman mp720 for about a year and haven't found any. If anyone has got it would somebody send it to me! also i have been trying to upload a rom from several tablets but nothing works so far. also fasboot does not work. only fwdn mode.
I got the fastboot working. have tried a lots of roms and system images. still no luck. one flashing showed the green light on fwdn but it got to boot loop. also adb worked for about an hour.
the funny thing i have also noted is that if someone starts speaking about mpman mp720 in any forum the whole thread just stops. its not that bad??
original firmware found MPMAN MP 720
hey guys, new to this, just got a MP720, not much firmware about for this one, not must of anything really,
I did however find this site with links to the to original firmware from MPMAN,
using google translate haha, it seems the two flavours of chipset for this taplet,
Hynix NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Hynix.rar
Micron NAND firmware:
https://dl.dropbox.com/u/29403117/MP720 An 2.3_Micron.rar
Flash Tool:
https://dl.dropbox.com/u/29403117/upgrade tool and Introduction.rar
that said i have not tested these FW's and cant vouch for the safety of using them,
I'm not a developer but hopefully they could be usefull for making a cyanogenmod for it (fingers crossed haha) or some one who has bricked there tap,
source:
https://slo-tech.com/forum/t528078
I have downloaded these files so if the link becomes dead please let me know and i will send them
Hello,
this is my first posting in this exiting forum I just found ! Found / read already some postings, but they couldn't help me in detail.
I'v computer experience only in HW and Win SW. There is no LINUX knowledge. But I think with this great forum my Android problem(s)
can be solved.
My story: Bought PIPO U1-pro.Good build quality, brilliant display resolutuion,weak WLAN. For my first Android device it's o.k. for me.
The device run perfect for some weeks, but than could't be switched on although fully charged ! Some minutes later it was possible to
switch on ? ? ! ! Next day same situation. Made a reset, tablet worked for a while, then every app just made a restart of the tablet.
Now it's dead, can't be switched on anymore. Tried to install latest english factory SW - not possible - RKBatchtool no green "1" possible. only blue on start and red after trying to flash.
But fortunately device is found with RKandroidTool. Tool says" Found RKAndroid Loader Rock USB" . I think that's are good news
I unpacked latest PIPO firmware w windal tool and I think now I'v got all I need to flash the device, that's are :
- RK30xxLoader
- Images: boot, kernel, misc, recovery, system, update
- package-file, parameter, recover-script, update-script
Now my questions:
1. Should I erase IDB first ?
2. What are the correct adresses in RKAndroidtool ? Found different values on different RKAndroidtool_1.35 , especially for "system"
----------------------------------------------------------------------------
I made some screenshots but till now I don't know how to attach them here ? ? All Icons on below " message " don't operate for me ? ? ?
If you can anwser my questions and have other helpful hints I like to THX in advance
Now screenshots attached
Hello,
now I tried with my XP Laptop. With it it's possible to attach the screenshots, with Win 7 wasn't ?
Main question for me still is:
What are the correct adresses I should choose for the PIPO U1-pro ( 1GB RAM / 16 GB NAND )
See the scrennshots.
THX
Sal all,
I cannot find firmware for this tablet. It's a 7inch, dual camera, atm7029 quad core cpu, that doesn't start, but i can write firmware with Actions Pad Product Tool.
The only available firmwares for this type of cpu (atm7029) i was able to find, were from Ainol tablets, but these are not good.(only lights start 1sec)
Can someone help ?
10x in advance !
Hi! There is a similar device firmware from (Russian): (yadi.sk/d/Wku6HWTxKkaKa)
But WiFi and camera other.
System image
Here is the image of the system partition. Dumped with ADB from a working tablet. (512MB)
(mediafire.com/download/roc8870rirvt3hw/actc_system.img)
And this is the image of the recovery partition: (48MB)
(mediafire.com/download/fd30kaio8xb490j/acta_recovery.img)
If you want to see what's inside the images, mount the image in Linux, or use Linux Reader if you're using Windows.
How to use the actc_system.img and acta_recovery.img
Hi, I'm an android newbie needing help. I found this thread while searching for how to deal with a bootlooping Orion TAB-700qc tablet belonging to a friend.
Apparently my friend tried to update the tablet with the wrong update (I'm not really sure what he did), but it went into a bootloop -- it will not get past the "android" screen. I found how to go into the Recovery menu but nothing there would fix the problem. I have downloaded the actc_system.img and acta_recovery.img discussed in this thread, but I need step-by-step instructions for how to use them to get the tablet working again.
Can someone please direct me to instructions that I as a newbie will understand? I have worked a lot with pc's but I have almost no experience with androids.
Thanks,
cmNhu
I have tablet Teclast X10 Plus ((F2D6) Intel Z8300 Cherry Trail CPU. Android 5.1 only. Unable to find any information on how to root this device. Assistance will be appreciated. Thanking you.
Same here, no info from the company. Worse, we are theoretically supposed to be able to install Windows 10, but Teclast does not give any drivers for that. With only 2go of RAM, I don't care that much about Win 10, but not being able to root is frustrating. I've tried fastboot OEM unlock on the device, it said it worked, but it actually didn't
There's no OEM information for stock firmware flashing?
If you go there : teclast.com/en/firmware/ and type: f2d6 , then you have the only thing that they gave us, it's an Intel flash tool with the current firmware and android 5.1. I guess that there is something in there we could start with, but I'm not an expert. Other than that, the company give no support whatsoever and doesn't answer emails.
As for other information: I've tried to root with KingoRoot, it shows successful, my device rebooted, but seems to hang after the second boot stage, unable to load the O.S. anymore. I had to re-flash the device to fix it.
Somebody found a way to root: hispatablets.com/tablets-teclast/root-teclast-x10-plus-solucionado-t8419.html
I’ve never been that happy to know more than one language
If you need help with the instructions (in Spanish), just ask. I’ve tried and it’s working, my x10 plus is now rooted.
Still, the procedure is a bit clunky and I’m sure we can optimize the process (and fixed the reboot needed problem after the --daemon).
This is a good step and it seems like with this and the package given by Teclast we have enough information to do a lot of things… Still, there is work to do…
how i can get dualboot? I need windows 10 / android version but unfortunatelly i bought android only
Found a review saying this tablet has 'upside down' problem. Basically, it displays some apps upside down and there's no way to fix it.
Do you experience that too?
Flyagaric : It's not impossible, but it is super easy to fix (for those with this bug), you just choose one particular position (I suggest landscape), you go in options and lock the rotation. Every apps will properly open in the current position.
Hi all,
Hoping someone might have some knowledge on this Chinese cheap build tablet.
Its an iRulu eXpro X1, model X10. Inside is the Allwinner A83T with 16Gb Rom and 1 Gb RAM.
This was previously with my daughter but we just upgraded her to a Sumsung Tab A, so I thought I'd play with the iRulu (bad mistake lol).
The iRulu was still running kitkat so I rooted it (Kingo Root works fine in anyone else is trying), attempted to install CWM and TWRP. Both failed, every attempt through adb / fastboot gave bootloader: secure mode fail error.
So I them decided to flash the new rom from iRulu's website - using PhoenixUSB.
All was going well, the tablet went into download mode (hold Esc button, plug USB cable in and press power button 10 times in rapid succession.) and the firmware started to download. At 80% PhoneixUSB threw a boot(0) error and stopped.
After this the tablet will not start (nothing on display) nor even show the charging icon on the screen! It does however still enter the download mode so I can try other images. So far I have tried 5 different images (including darkglow10.1_android5.1.img, A83T_N102_N1021L1BC_20151123.img) however all of then error when writing to the bootloader. I have also tried PhoenixCard to write an image in Startup mode - this gave nothing Live Suite makes no difference either, using the images I have.
Unfortunately the serial number has worn off the device so I cant be sure of the exact firmware from iRulu website to install. (I've mailed them for what its worth).
I have opened the device and the pcb is marked INET-N102-REV01 and Zeng-gc2014-12-22. Google has some stuff on it but nothing I understood
Does anyone have any thoughts? I'm concerned that the bootloader is locked / corrupt in some fashion which is stopping the download.
thanks
update: using the x1081 firmware from iRulu and PhoneixCard I have restore functionality. The device thinks its an expro x2 plus and it doesnt recognise the SD card slot (tried multiple cards) but other than that it seems okay
Will try to figure the correct firmware thou - anyone?
thanks
Having the same issue
Hello, I am having the same problems with that tablet, got it from this girl I'm seeing. It was freezing whenever it connected to the internet, I assume was a ROM issue, i flashed an incorrect recovery on it after getting frustrated. Can you please help?