GidGat™ Ultimate White Edition v6.0 Released by Muzzamil IhsanRom Features
Based on Hyperion Kernel 4.4.2 KitKat
90%White Rom
Free ram 500-600mb
Best Ever Battery Backup
Flux Contacts
Dolby Atmos for Greater Sound Quality
Sound Patch Attached for High Volume
Nexus Boot Animation
Wifi Highly Tweaked
3G on both sims
GidGat Settings
Torch Added
Smoothy Performance Tweaks
and much more better to check in roms.
NOTE
Flash using Philz Recovery
-Flash at your own risk.We are not responsible for bricked devices or any damages caused due to the ROM.You loose warranty whenever you root your device or flash custom ROM's.
-Keep your device 100% charged before flashing any ROM.
-Take a backup from the recovery in case you mess up with something.
-Do not mirror links without permission
-I won't guarantee anything about my ROM. If you like it keep it otherwise the most simple thing you can do is switch to other ROM.
Instructions
Code:
Reboot to recovery
Wipe data factory reset
Clean to install a new rom
yes,i will install new rom
go back and select install zip from sd card
Select GidGat Ultimate white Edition v6
Flash it
Flash Dolby
Flash Any Modem patch if you have week signal strength
Flash Sound Patch
Reboot
Enjoy!
Screenshots:https://www.facebook.com/MuziTechsbyMuzzamil/posts/386634891542616?comment_id=387082144831224¬if_t=feed_comment
Credits: @silence abd @orochi of Turkdevs Forum:highfive: @hyperion70 for his Kernel for MT6589:good: @MuzzamilIhsan (Me) for porting rom:good:
Downloads
Sound Patch :http://d-h.st/CaVU
Dolby Atmos: http://d-h.st/ociP
PhilzTouch Recovery : http://d-h.st/Euf
FAQ:
For Multiwindow: Download and install Xposed Installer then download Xmultiwindow from Xposed Download section install it and reboot
Please Hit Thanks on XDA as I'm working hard to provide some good rom
XDA:DevDB Information
GidGat White Edition, ROM for the Micromax A116
Contributors
MuzzamilIhsan
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Micromax A116 Device or Clone
Version Information
Status: Stable
Current Stable Version: 6.0
Stable Release Date: 2015-06-22
Created 2015-06-22
Last Updated 2015-06-22
Network Fix
Network Fix
If anyone is facing Network Signals issue then you can flash this Network Fix Patch
https://drive.google.com/file/d/0B0qDIfEwABG4VV9VeUxnYmR3ajg/view?usp=sharing
Download it
Go to recovery
Install zip from sd card
flash it
Hi. I can't download your ROM. Can u plz authorize the download on google drive ?.
Thks bro.
Edit:
Downloading now...
@MuzzamilIhsan Great downloading now. And another thing bro in ur forum there are roms for qmobile a 600 can we flash all those roms on a116???
Pi Darksider said:
@MuzzamilIhsan Great downloading now. And another thing bro in ur forum there are roms for qmobile a 600 can we flash all those roms on a116???
Click to expand...
Click to collapse
Yes bro yo can flash all those because A600 is clone of A116
Done
Request for Color Os
Was jus wondering that can u port latest Color OS if you don mind bro
is there any option or patch to make white theme into black??
thesandyrock said:
is there any option or patch to make white theme into black??
Click to expand...
Click to collapse
No Bro
MuzzamilIhsan said:
No Bro
Click to expand...
Click to collapse
Is there any option to get brightest flash light, flash light in color os roms are the brightest ever
After flashing stock rom V2.13/V.309/V.315 using nubia updater tool . It works like a charm but whenever I flash gapps for lollipop :
I have tried following gapps package :
From need rom that given along with v.3.09
Tried PICO gapps , modular , mini , basic all tried.
Tried all other gaaps .
But whenever I install gapps then after first boot up it works whenver I reset it it shows following error and I can't pass this screen.
I tried BB72 ROM V3.19 it working fine as it comes with preinstalled gapps . But on stock gapps are not working out.
I'm on stock 3.19 and Gapps are running stable.
Which version did you install? From where? Did you do any wipes?
My best advice: rinse and repeat... ?
P.S.: please avoid double-posting -- delete the other thread.
Hello all
Im french so excuse my bad english
I was on the hybrid Concept ROM 5.1.1 for ZU then yesterday i've flashed the Résurrection Remix 6.0
When ROM has booted , Google play was not installed
I try to flash another gapps but impossible to have Google play service . Even if i try to install Google play apk , the problem still the same.
So i decide to reinstall another ROM . but i can't because twrp was replaced by CM recovery ans flashing other ROM than 6.0 is impossible....
Does someone can explain me how reinstall twrp or another recovery and go back on 5.1. Custom ROM ?
Thanks to all
ingi28 said:
Hello all
Im french so excuse my bad english
I was on the hybrid Concept ROM 5.1.1 for ZU then yesterday i've flashed the Résurrection Remix 6.0
When ROM has booted , Google play was not installed
I try to flash another gapps but impossible to have Google play service . Even if i try to install Google play apk , the problem still the same.
So i decide to reinstall another ROM . but i can't because twrp was replaced by CM recovery ans flashing other ROM than 6.0 is impossible....
Does someone can explain me how reinstall twrp or another recovery and go back on 5.1. Custom ROM ?
Thanks to all
Click to expand...
Click to collapse
you need reflash twrp recovery 3.0.0 (ex fastboot flash boot twrp-3.0.0-0-togari.img) if you have botloader unlocked
Or use Flashtool
It works fine. Thanx you bro
Flash twrp recovery one more time
Done. Working fine now
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
[ROM][7.1.2] RROS N v5.8.5 For Panasonic T44
I am not responsible for any unusual happen. You can flash this phone SP Flash tool moreover you can ask me for help.
Information
This ROM is ported from Leego Z5 so may the name of this phone may appear in T44. Lots of bug has been fixed.
Android: 7.1.2 (Nougat)
RR-N-v5.8.5
Bugs
*Camera recording not working.
*Cast screen not working.
*Call work on loudspeaker or earphones
*Tethering and portable hotspot
*Some common nougat bug which you can adapt.
Installation
Required TWRP Recovery to flash. Get it here.
Untick signature verification
And then simply flash.
//Note-- You should wipe data if application are getting crash.
Download
Download Resurrection Remix OS for Panasonic T44.
here
Flashed it successfully
Flashed the ROM successfully..
Code:
[CODE]
[/CODE]brother can u make a same resuurection remix rom for panasonic p110, alongwith twrp recovery and i will be very thankfull to u .
pls reply me on: [email protected]