Related
Hai Guys,
I got a problem on my samsung s3.
i install the wifi hacker app. when i open the app, its shows installing, hacking all
then i wait for few minutes. try restart my phone. after that my boot screen logo all changed.
when i press volume down + home + power button its go to Factory Mode. i cant go into download mode.
some more samsung kies also cant detect my phone.
i cant root my phone using any software.
pls help me guys.
Wifi hacker is fake,dont believe it
Flash ur stock rom again,u said u cant go to download mode try restoring nandroid backup
Then try
sent by typing by my fingers
hai again
[email protected] said:
Wifi hacker is fake,dont believe it
Flash ur stock rom again,u said u cant go to download mode try restoring nandroid backup
Then try
sent by typing by my fingers
Click to expand...
Click to collapse
Bro, actualy 1) how to restoring nandroid backup?
2)how to flash stock rom?
To go to download mode. hold home then volume down then power button until phone vibrates and then release.
Teenagaran said:
Bro, actualy 1) how to restoring nandroid backup?
2)how to flash stock rom?
Click to expand...
Click to collapse
Well to flash stock rom u need odin and download mode
Search google for it
To restore nandroid backup u need cwm and nandroid backup but i think u dont have
sent by typing by my fingers
Teenagaran said:
Bro, actualy 1) how to restoring nandroid backup?
2)how to flash stock rom?
Click to expand...
Click to collapse
General section read the faqs and guides first .
If you dont know the answer to question 1 then you have no Nandroid backup and probably no EFS backup >>> Start with the basics before you brick your phone .
Hi,
i have a problem with my Samsung Wave 8500
I succesfully installed http://forum.xda-developers.com/showthread.php?t=2482214
B.U.X.
my problem is that my BADA is not working
i see the Samsung Text but after that nothing happens
the android version is not the right as it does not have modem and phone working
so i wanted to install CM Badadroid
http://forum.xda-developers.com/showthread.php?t=2400126
but first the ZIP does not install
it says e:error Status 7 installation aborted
so i would like to install anything again
but my download mode never worked, it shows me up bluescreen only
before that i always flashed FOTA with normal Booted bada which always worked
my goal is to recover to bada or install the CM10.1 which would be enough for me with modem function
please help
but my download mode never worked, it shows me up bluescreen only
Click to expand...
Click to collapse
If you press 3 keys...
Code:
Volume down
Screenlock
Power On
You are not able to see Download mode on screen?
Best Regards
adfree said:
If you press 3 keys...
Code:
Volume down
Screenlock
Power On
You are not able to see Download mode on screen?
Best Regards
Click to expand...
Click to collapse
yes
i tried many combinations
btw. your one is wrong which i also tried
so i thought maybe we can manually install CM
is the clocktowermod the base and necassary ?
once i had installed the zip and the right zlib and saw the boot which says cyanogen
but it happened nothing even waiting 10mins
also i cant go in to recovery mode with CM zImage, the other one works
Edit : i know why my bada is not working
i installed FOTA from wave 2 instead of Wave 1
my download mode is not working properly
any ideas ?
Volume down + Screenlock + Power On
is working for me....
Then you can install Bada Turko CFW v10.1 from here. Follow the instructions
http://forum.xda-developers.com/showthread.php?t=2306458
And then you can install CM Badadroid as you want.
bmois said:
Volume down + Screenlock + Power On
is working for me....
Then you can install Bada Turko CFW v10.1 from here. Follow the instructions
http://forum.xda-developers.com/showthread.php?t=2306458
And then you can install CM Badadroid as you want.
Click to expand...
Click to collapse
Hey my friend
i hate the internet
download mode was working all the time haha
(if you google you will find different ones, aha maybe wave 2?)
do i have to use BUX the 4.3.1 clocktowermod as Base or do i need only zlib and the CM.zip ?
also another question
how can i format the SD card back to original again (8gb) ?
i can see the other half with the recovery mode aroma filemanager only
thank you
saywa said:
Hey my friend
i hate the internet
download mode was working all the time haha
(if you google you will find different ones, aha maybe wave 2?)
do i have to use BUX the 4.3.1 clocktowermod as Base or do i need only zlib and the CM.zip ?
Click to expand...
Click to collapse
You don't have to use BUX. Use only files and instructions from here.
http://forum.xda-developers.com/show....php?t=2400126
saywa said:
also another question
how can i format the SD card back to original again (8gb) ?
i can see the other half with the recovery mode aroma filemanager only
thank you
Click to expand...
Click to collapse
I think it has an option from the menu on recovery mode. After you flash Turko CFW, reboot on recovery mode and search on menus how to fromat your card.
bmois said:
You don't have to use BUX. Use only files and instructions from here.
http://forum.xda-developers.com/show....php?t=2400126
I think it has an option from the menu on recovery mode. After you flash Turko CFW, reboot on recovery mode and search on menus how to fromat your card.
Click to expand...
Click to collapse
i did all of them succesfully
BUT i only see CYANOGEN MOD ring loading
nothing changes
thanks will try it after that
now its working
but i cant get into the recovery mode
volume up + power
and its booting everytime
when i want to shut it down it should stay shut down
how i change that ?
adfree said:
If you press 3 keys...
Code:
Volume down
Screenlock
Power On
You are not able to see Download mode on screen?
Best Regards
Click to expand...
Click to collapse
download mode is
Vol down + Camera + Power
how i delete GAPPS to boost my Phone again ?
and when i shut down wave it auto reboots to android, how to close this option ?
and which marketplace is not buggy as google play ?
GreekBlood said:
download mode is
Vol down + Camera + Power
Click to expand...
Click to collapse
Voldown + Lock + Power
ihavenick said:
Voldown + Lock + Power
Click to expand...
Click to collapse
new fota?
ah. anyway. original and sd fota is like i said
no need to remember buttons just connect your phone to multiloader and click on download button phone automatically get in download mode
black0000 said:
no need to remember buttons just connect your phone to multiloader and click on download button phone automatically get in download mode
Click to expand...
Click to collapse
not in android
GreekBlood said:
new fota?
ah. anyway. original and sd fota is like i said
Click to expand...
Click to collapse
every fota opens gmode like i said maybe power + voldown is dmode
see
you talkin also bout button combination
cmon guys answer my questions
GAPPS deinstallation any zip ?
and any alternate for GAPPS
saywa said:
see
you talkin also bout button combination
cmon guys answer my questions
GAPPS deinstallation any zip ?
and any alternate for GAPPS
Click to expand...
Click to collapse
Nope, sorry, i'm affraid that you have to format your system partition and reflash the rom. (If you don't touch to the data partition your datas won't be lost).
For an alternate solution... Well you can try to install a slim gapps (I saw a link for one in the CM 10.1 thread. Or simply google it.)
what about deleting via Android ?
will it affect something positive ?
isnt there any zip for recovery mode ?
ok if not i could flash again but i want to keep my apps downloaded from the store
please help quick
saywa said:
what about deleting via Android ?
will it affect something positive ?
isnt there any zip for recovery mode ?
ok if not i could flash again but i want to keep my apps downloaded from the store
please help quick
Click to expand...
Click to collapse
That's exactly what I was saying. th only way to remove the gapps is to reflash the rom, and if you don't wipe the data partition, your apps will be fine. I you encounter any kind of problem in android after doing that, you will have to wipe your data partition though...
Tenroc said:
That's exactly what I was saying. th only way to remove the gapps is to reflash the rom, and if you don't wipe the data partition, your apps will be fine. I you encounter any kind of problem in android after doing that, you will have to wipe your data partition though...
Click to expand...
Click to collapse
You can delete the .apk files in the system/app folder. (root view on default filemannager)
GreekBlood said:
You can delete the .apk files in the system/app folder. (root view on default filemannager)
Click to expand...
Click to collapse
Yes of course, but there's not only apks in the gapps zip. There's also libs and a bunch of other things, so if he really want to fully uninstall gapps, or he'll have to remove everything manually, or he will have to reflash the rom. And in my opinion, the second way is really simpler.
Hi, I have a big problem, after many changes (build.prop, xposed etc.) I decide o make a Wipe Factory default. When the Wipe was over and i tried to use the phone, I have a message "com.android,phone" Stop, and I can use my phone, Im trying to install the original rom in the recovery but fails every time, someone can help me?
Thanks!
Oscar
Do you have TWRP? Maybe you can try this.
I have the Chinese version Mt2.l05...
ScoobSTi said:
Do you have TWRP? Maybe you can try this.
Click to expand...
Click to collapse
Use usb OTG or sd cardc for stock rom installation via dload method
Thanks
And how can i do these?, I've already dowload the rom, but I couldnt install in the recovery, because this file is designed to update in to the settings menu, but I cant use any menu...
janrck said:
And how can i do these?, I've already dowload the rom, but I couldnt install in the recovery, because this file is designed to update in to the settings menu, but I cant use any menu...
Click to expand...
Click to collapse
Download the full firmware, place it on an sd card. Turn on the phone while holding both the volume up and down button.
Finally i used the dload method and it works! Thx malik!
No problem mate .
Always there to help.
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed:
HI ,
I have a serious issue with my sm-j7008 ( china mobile ) I cannot add a google account . Tried installing google play via APK but no such luck . I rooted the device and nothing happens . There is no alternative firmware for this mobile phone .
You'll need the Google core apps and framework as well. Try to flash gapps to your phone. You probably have to use vpn also, to be able to use play etc
tys0n said:
You'll need the Google core apps and framework as well. Try to flash gapps to your phone. You probably have to use vpn also, to be able to use play etc
Click to expand...
Click to collapse
How do you do that ? Can you please provide me the links .
installed TWP Odin says successful . However when I press volume up button it still showing the old recovery software .
You have custom recovery like twrp?
Download gapps for your platform and Android version from http://opengapps.org
Go to recovery and make a backup of your rom just in case something goes wrong. Flash gapps in recovery.
---------- Post added at 02:41 PM ---------- Previous post was at 02:33 PM ----------
arrowcpt said:
installed TWP Odin says successful . However when I press volume up button it still showing the old recovery software .
Click to expand...
Click to collapse
Oh ok. Untick auto reboot in odin and reboot to recovery manually after flash, without booting to system first.
tys0n said:
You have custom recovery like twrp?
Download gapps for your platform and Android version from http://opengapps.org
Go to recovery and make a backup of your rom just in case something goes wrong. Flash gapps in recovery.
---------- Post added at 02:41 PM ---------- Previous post was at 02:33 PM ----------
Oh ok. Untick auto reboot in odin and reboot to recovery manually after flash, without booting to system first.
Click to expand...
Click to collapse
how do you reboot manually
?
arrowcpt said:
how do you reboot manually
?
Click to expand...
Click to collapse
I'm not sure since I don't own this device myself.
If it has removable battery you should be able to just press power untill it shuts down, then immediately push volume up and home simultaniously while still keeping power pressed.
If it's non removable battery you'll have to press volume down and power to force it to reboot, then immediately push volume up and home simultaniously while still keeping power pressed.
Isn't there any instructions for installation where you found the twrp recovery?
Can you give me a link?
Have you enabled developer options and turned on OEM unlock to start with?
otherwise you'll soft brick your phone and will be forced to reflash stock rom with odin.
tys0n said:
I'm not sure since I don't own this device myself.
If it has removable battery you should be able to just press power untill it shuts down, then immediately push volume up and home simultaniously while still keeping power pressed.
If it's non removable battery you'll have to press volume down and power to force it to reboot, then immediately push volume up and home simultaniously while still keeping power pressed.
Isn't there any instructions for installation where you found the twrp recovery?
Can you give me a link?
Have you enabled developer options and turned on OEM unlock to start with?
otherwise you'll soft brick your phone and will be forced to reflash stock rom with odin.
Click to expand...
Click to collapse
this one . Yes phone is set to developer mode .
http://www.android.gs/install-twrp-recovery-samsung-galaxy-j7/
arrowcpt said:
this one . Yes phone is set to developer mode .
http://www.android.gs/install-twrp-recovery-samsung-galaxy-j7/
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-j7/how-to/tutorial-how-to-install-twrp-recovery-t3203632
tried this one as well . I'm getting an error Binary size is too large
Download google installer 2.0 install the apps then make them system apps.
Hello China has blocked gapps in it's frimware's thus you will need to get twrp to get gapps for your device
Untick the auto reboot option
flash the twrp
once done take out battery and reboot to twrp then flash the correct gapps zip file