Hi.
I recently tried (stupidly) to install CWM on SM-T350. It failed and bricked. I then was worried about the boot screen burning onto the display, so I opened it up and unplugged the cable next to the battery one. I plugged it back in, and tried to turn it on, but nothing happened.
Please help......
Related
Hey guys, I was using odin to flash back to stock. My GPS died and was going to try to get a replacement before I tried the hardware fix.
I went to flash back to stock using ODIN, it got stuck on modem.bin. After reading a bunch on people getting stuck here, it looked like it was safe to unplug and try again. I unplugged and now my phone will not turn on at all. Simply a black screen... no recovery, no download mode, no battery status when plugged in. Nothing.
I need some ideas here!
Thanks!!!
This worked for me in similar situations: Pull the battery, plug-in the usb cable, do the three-finger thing (or two finger or whatever works with your boot-loader) and then put in the battery and hope.
Everytime I plug in Nook Charging cable it keeps booting over and over. If I plug in my samsung galaxy cable it charges but the moment I plug in it just turns off completely and wont turn on until I unplug. I originally had a dual boot system running for 1.4.0 which is my nook version and tried to do a recovery which said successful from the file I created but when I rebooted the whole system didnt know what to use for what and kept asking then crashing. I factory wipe/reset after the problem started and upgraded to CM10 cynogen mod with the new JellyBean no duel boot. RUNS AMAZING. But the charging problems still remains, even when I booted stock after factory reset it was still doing this. I have CWM installed internally. Please help me I have looked over many threads one said it was an update problem created with AdobeFlash updates and I tryed to flash the fix listed but it just says error during install and aborts. Also it will stay on during the cynogen mod boot screen even if i plug in either charger but at the top it just says "Charging Disabled" says the precent. I left it plugged in at this screen and it didnt charge one percent after 30 minutes.
I just want to charge it and have it on at the same time. Please any help, any ideas and comments is appreciated. Thank You
i have this problem too. I'm using CM10. My battery died and wouldn't charge no matter how long I had it plugged in for.
Then recently it turned on, but when it is plugged into the wall, it just constantly reboots.
Any help?
Hello i have recently updated my ROM but sadly something happened with my service, it just said "no service" and i wasn't able to receive or take any calls so i installed this rom again from the recovery, and then when i rebooted this device, it suddenly stopped on the green goblin logo loading screen and my device was unrecognized by a PC, recovery didn't work... so i tried a RoFUSiON which can install a rom through the pc but my device, as i said, wasn't and isn't recognized anymore. What i can do? i can't even charge it, last night i connected it to the charger and let it on. When i woke up and unplugged it, it had no battery! probably it wasn't chargning, it was discharging, and the only way i can turn my mobile on, is plugging it to the usb, doesn't matter if into the power socket or usb-to-usb, even the screen lights up without the battery but still i can't go to the recovery or fastboot (probably, because as i said my device isn't recognized so either that's the problem either fastboot doesn't work). Here's also the video about this, maybe someone can help me since i don't know what to do.. thanks in advance.
http://www.youtube.com/watch?v=pzUQA-PNI4A
I bought my Galaxy Note II right after it came out, and after a few months, I had unlocked the bootloader, rooted the phone, and installed the Mean Bean ROM. I ran it with ZERO problems until...
Yesterday my phone dies after the battery is fully discharged, and when I plug it in, all I see is the pre-boot battery, as if it is about to charge, but the circular loading symbol is dead in the middle, frozen. The LED light up top won't do anything either.
I could get it into recovery and download mode, although the battery would not charge, so the phone had to be plugged in no matter what. Did a clean wipe and tried reflashing the ROM, then I tried flashing both the stock roms from stockroms.net for the Verizon Note 2. Every flash failed.
I went into download mode to try and flash the stock roms via Odin, but Odin wouldn't recognize my phone. Reinstalled the Samsung Mobile Drivers (yes the correct ones), tried using the Toolkit, but no matter what, Odin wouldn't recognize my phone. No comport number, nothing.
Next, I took out the usb charging port in the phone, made sure nothing was damaged or unplugged, and put it back it. No change. Went to bed frustrated as all hell.
This morning, I tried everything again a second time, and the next thing I know, hours later, the phone shows 11% battery in recovery mode, but no change otherwise. This whole time, I've been using Team Win Recovery Project, so I decide to switch to ClockWorkMod. I get the file on the sd card, put it into the phone, and...
Nothing. That 11% disappeared apparently. Now I cannot boot into recovery mode or download mode, let alone get the frozen battery indicator. What now?
Could be the charging port is damaged. About 2 months ago my phone looked like it was charging when I plugged it in (would show charging indicator), but really wasn't. Called Verizon and got a warranty replacement.
Sent From My Sticky Note, Too?
Hi guys, I have a samsung galaxy j600fn/ds, tryed to flash twrp, something went wrong and now I'm locked on the ''Samsung'' logo screen
I guess it is brick, though I'm totally stuck at the screen, the phone won't even turn off, so I don't know how to acces download mode to install stock firmware.. anyone can be of help?
EDIT: solved.. of course the solution was just to wait for the battery to be completley depleted, I just got scared there not beeing able to do anything
Wait-
So you just let your phone in bootloop all night (?), then you charge it without turning it on,
waited till 30%, and then you put it in download mode and installed the firmwere?
Does it really work? 'cause I tried to do that before, and the bootloop stopped. I tought I ended up into an hard brick.
I pressed powen and tried to put the phone into download mode, but nothing.
I put the usb on my pc, and odin was actually reading it, so I tried again and again to get into the download mode.
Afret 30 minutes, i pressed power again, (and finally) the boorloop restarted.
Well um.. the phone now is probably at 60%.. I hope it wont stop again, and I hope this method will work.