Hi everyone,
My Huawei Mediapad T1 - 8.0 stuck up on android logo on the beginning of starting. No way to enter recovery mode. I downloaded firmware for this model and put it's UPDATE.APP on SD card. After pressing Volume +, Volume - and Power button and after releasing Power button I get this message: "Recovery image verify failed" and under: "Please update to the authorized images...".
Please, tell me how to recover this tablet?
Thank you in advance!
Related
Hi, a friend gave me his mediapad x1 7D-501u, coz he had forgot the password and bought the Nexus 7.
I cant seem to reset the mediapad to its factory settings though!! I tried booting into the bootloader, but when I press the volume down + power for 10 seconds, the tab just starts normally, but now it says "Safe Mode" near the lockscreen.
Is there anyway I can reset this tab for use ? Also, I tried vol Up+ vol Down + power, but it boots into an an update loop and then tries to update and says that no file was found in the SD card. Then a big Red "FAIL" comes on the screen, and it says "please press the power button for 10 seconds to restart"
Please can anyone help on this ??
TarunN5 said:
Hi, a friend gave me his mediapad x1 7D-501u, coz he had forgot the password and bought the Nexus 7.
I cant seem to reset the mediapad to its factory settings though!! I tried booting into the bootloader, but when I press the volume down + power for 10 seconds, the tab just starts normally, but now it says "Safe Mode" near the lockscreen.
Is there anyway I can reset this tab for use ? Also, I tried vol Up+ vol Down + power, but it boots into an an update loop and then tries to update and says that no file was found in the SD card. Then a big Red "FAIL" comes on the screen, and it says "please press the power button for 10 seconds to restart"
Please can anyone help on this ??
Click to expand...
Click to collapse
Is there any reason you can't just do a "Factory data reset" from the "Backup & reset" setting?
Its password locked
Easiest way is to download an official full ROM (not an update), follow the instructions on how to put it on an SD card and start the X1 with volume+&- and power.
Try Volume Up + Power. Worked for me.
Hold the Volume Up Connect the charge cable into the tablet.Wait until you get into recovery
Hello all,
I had rooted my Asus Memo Pad Smart 10 with KingoRoot.
Bought SuperSU Pro and BusyBox Pro
Been using it for many months without issue
Went to options in SuperSU Pro to install itself as a system app
Tablet rebooted, but now only shows Asus logo without spinning dots and hangs
This is what I've tried so far:
------------------------------
Rebooted to recovery with Power button + Volume Down button
Showed the following:
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.31-20130823" A03
key driver not found.. Booting OS
Starting Fastboot USB download protocol
It then has the usual 3 choices: RCK, Android, Wipe Data
I chose Wipe Data with Volume Up button
Then showed:
Please wait a few minutes..
Booting Recovery kernel image
Signature match.
Are you sure to wipe your user data?
Press <VOL_DOWN> to cancel,
Press <VOL_UP> to continue.
I pressed Volume Up button
Then showed the android with spinning hexagon-type cube in stomach
After about 5 seconds, it went back to Asus logo without spinning dots
------------------------------
------------------------------
After rebooting to recovery, I chose the Android option with Volume Up button
It showed:
Cold-booting Linux
Signature match.
Then it hangs
------------------------------
------------------------------
On my laptop, I downloaded latest firmware file for my Asus Memo Pad Smart 10 (ME301T), US_epaduser_10_6_1_31_UpdateLauncher.zip
Unzipped it to reveal US_epad-user-10.6.1.31.zip
Placed US_epad-user-10.6.1.31.zip onto MicroSD card and inserted into tablet
After rebooting, I chose the RCK option with Volume Up button
Rebooted with Power button + Volume Down button
Chose RCK with Volume Up
It showed:
Booting Recovery kernel image
Signature match.
Then showed dead android with red triangle with exclamation point
------------------------------
I can't get to the tablet with ADB because it no longer recognizes the device.
Can anyone help me flash the firmware?
SOLVED!
I was able to flash my firmware by renaming the zip file from "US_epad-user-10.6.1.31.zip" to "EP201_1024_SDUPDATE.zip"
Copied this file onto blank MicroSD card (formatted FAT32)
Pressed Power button and Volume Down simultaneously to reboot into recovery
Press Volume Up to select RCK
Yes!!!
jerryferreira said:
Hello all,
I had rooted my Asus Memo Pad Smart 10 with KingoRoot.
Bought SuperSU Pro and BusyBox Pro
Been using it for many months without issue
Went to options in SuperSU Pro to install itself as a system app
Tablet rebooted, but now only shows Asus logo without spinning dots and hangs
This is what I've tried so far:
------------------------------
Rebooted to recovery with Power button + Volume Down button
Showed the following:
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.31-20130823" A03
key driver not found.. Booting OS
Starting Fastboot USB download protocol
It then has the usual 3 choices: RCK, Android, Wipe Data
I chose Wipe Data with Volume Up button
Then showed:
Please wait a few minutes..
Booting Recovery kernel image
Signature match.
Are you sure to wipe your user data?
Press <VOL_DOWN> to cancel,
Press <VOL_UP> to continue.
I pressed Volume Up button
Then showed the android with spinning hexagon-type cube in stomach
After about 5 seconds, it went back to Asus logo without spinning dots
------------------------------
------------------------------
After rebooting to recovery, I chose the Android option with Volume Up button
It showed:
Cold-booting Linux
Signature match.
Then it hangs
------------------------------
------------------------------
On my laptop, I downloaded latest firmware file for my Asus Memo Pad Smart 10 (ME301T), US_epaduser_10_6_1_31_UpdateLauncher.zip
Unzipped it to reveal US_epad-user-10.6.1.31.zip
Placed US_epad-user-10.6.1.31.zip onto MicroSD card and inserted into tablet
After rebooting, I chose the RCK option with Volume Up button
Rebooted with Power button + Volume Down button
Chose RCK with Volume Up
It showed:
Booting Recovery kernel image
Signature match.
Then showed dead android with red triangle with exclamation point
------------------------------
I can't get to the tablet with ADB because it no longer recognizes the device.
Can anyone help me flash the firmware?
Click to expand...
Click to collapse
nice job
Hi folks!
Does anybody still keep in depth of HDD (tape archives, possibly? %) ) firmware less than or equal US_epad-user-10.6.1.29.zip?
Found last week ME301T with US 10.6.1.31, registered at ASUS, but have no luck with unlocking bootloader - network error...
MitMProxy+rooted+root certs from cacerts.org does this own, but no luck with unlocking bootloader...
mr.kolucci said:
Hi folks!
Does anybody still keep in depth of HDD (tape archives, possibly? %) ) firmware less than or equal US_epad-user-10.6.1.29.zip?
Found last week ME301T with US 10.6.1.31, registered at ASUS, but have no luck with unlocking bootloader - network error...
MitMProxy+rooted+root certs from cacerts.org does this own, but no luck with unlocking bootloader...
Click to expand...
Click to collapse
Hi I am on the same boat. Let me know if you have an idea.
With Android 4.2. and bloatware this Tab is unusable
I bricked my new P8 lite...I would to install the root: I unlocked the bootloader and then I used this file for the root but the smartphone will not start...I see the Huawei logo, and then off...I have tried by putting the official firmware on a microSD...pressing VOL up and VOL down and power for 10 seconds, release power and hold VOL up and VOL down for another 10 sec but I see only the Huawei logo for a few seconds and then nothing...the fastboot command not work (waiting for any devices) and if I type adb devices , comes back to me list of devices attached...recovery...please help me, it's the phone of my girlfriend :crying::crying::crying::crying::crying:
Hi everyone, I'm a new xda user.
I have a big problem with a Huawei Mediapad T3 7" BG2-U01.
My friend doesn't use it very often and he forgot the password.
The real problem is that seems like this tab doesn't have a recovery or a dload mode.
I tried all the combinations of the buttons but the recovery(MIUI), the dload mode and the chinese recovery don't work, there's only a reboot to the lockscreen.
He never enabled the Debug USB, so ADB and the pc don't see the device.
Is there any chance to unlock it or make a factory reset?
Thanks for helping me
Hard reset or Stock Recovery:
· off Tab
· Press power button for only 2 sec then release
· Immediately press hold volume up until Huawei logo appears
Hi everyone, I'm a new xda user.
I have a big problem with a Huawei Mediapad T3 7" BG2-U01.
My friend doesn't use it very often and he forgot the password.
The real problem is that seems like this tab doesn't have a recovery or a dload mode.
I tried all the combinations of the buttons but the recovery(MIUI), the dload mode and the chinese recovery don't work, there's only a reboot to the lockscreen.
He never enabled the Debug USB, so ADB and the pc don't see the device.
Is there any chance to do an Hard Reset or unlock the tab?
Thanks for helping me
Hard reset or Stock Recovery:
· off Tab
· Press power button for only 2 sec then release
· Immediately press hold volume up until Huawei logo appears