My phones battery completely discharged and after charging it stuck on Samsung Logo. Now I can only enter download mode with Volume down+power+menu, but i can't enter to recovery mode with Volume up+menu+power. I downloaded latest samsung drivers and Kies, but Kies can't connect to phone via USB, The I downloaded latest Odin, flashed newest firmware G925FXXU5EQFC_G925FNEE5EQE1_G925FXXU5EQCD_HOME.tar.md5 and then twrp-3.1.1-0-zerolte.img.tar but still nothing has changed. Any ideas what I'm doing wrong?
Download mode info - imgur.com/a/7yWKw
Same problem on my s6 edge..please help our solution
Zhemaitis said:
My phones battery completely discharged and after charging it stuck on Samsung Logo. Now I can only enter download mode with Volume down+power+menu, but i can't enter to recovery mode with Volume up+menu+power. I downloaded latest samsung drivers and Kies, but Kies can't connect to phone via USB, The I downloaded latest Odin, flashed newest firmware G925FXXU5EQFC_G925FNEE5EQE1_G925FXXU5EQCD_HOME.tar.md5 and then twrp-3.1.1-0-zerolte.img.tar but still nothing has changed. Any ideas what I'm doing wrong?
Download mode info - imgur.com/a/7yWKw
Click to expand...
Click to collapse
Was your phone rooted before this happened and please tell the software version
Same here..after oficial update... rebooted in bootloop...
Phone is original, no root, no custom rom...
This is the second time this happens, first two months ago with second nougat update....
Samsung service responded "go to this repair shop" , and they told me the mainboard was broken, please pay 200 EUR, didnot accept that.
Went to several phone repairshops, and in the end found one with knowkedge, and they fixed it just by flashing the right rom.
NOW it happens again(wtf samsung).
Anyone, where to find the original rom (dont reply with sammobile,.. they suck).?
Frank...
DaBones said:
Same here..after oficial update... rebooted in bootloop...
Phone is original, no root, no custom rom...
This is the second time this happens, first two months ago with second nougat update....
Samsung service responded "go to this repair shop" , and they told me the mainboard was broken, please pay 200 EUR, didnot accept that.
Went to several phone repairshops, and in the end found one with knowkedge, and they fixed it just by flashing the right rom.
NOW it happens again(wtf samsung).
Anyone, where to find the original rom (dont reply with sammobile,.. they suck).?
Frank...
Click to expand...
Click to collapse
SamMobile. Sure, they suck on DL speeds, but they have the right files. You could suck it up and pay whatever the lowest cost is for a month of premium and skip the slow DL, then you'll have a spare ROM for future blunders too. And you'll still be saving a lot of money.
Or just do what most people do, start the download then go watch a movie, do whatever you gotta do if it's daytime or sleep if it's not.
DaBones said:
Same here..after oficial update... rebooted in bootloop...
Phone is original, no root, no custom rom...
This is the second time this happens, first two months ago with second nougat update....
Samsung service responded "go to this repair shop" , and they told me the mainboard was broken, please pay 200 EUR, didnot accept that.
Went to several phone repairshops, and in the end found one with knowkedge, and they fixed it just by flashing the right rom.
NOW it happens again(wtf samsung).
Anyone, where to find the original rom (dont reply with sammobile,.. they suck).?
Frank...
Click to expand...
Click to collapse
Samfirm tool from xda
updato.com
Updato is the best. No DL speed and has same firmwares as sammobile
ProdigyThirteen said:
SamMobile. Sure, they suck on DL speeds, but they have the right files. You could suck it up and pay whatever the lowest cost is for a month of premium and skip the slow DL, then you'll have a spare ROM for future blunders too. And you'll still be saving a lot of money.
Or just do what most people do, start the download then go watch a movie, do whatever you gotta do if it's daytime or sleep if it's not.
Click to expand...
Click to collapse
Tried that, for several days, all downloads failed.
Thx anyway, the updato.com site helped me out here.
---------- Post added at 11:53 AM ---------- Previous post was at 11:50 AM ----------
callumbr1 said:
Samfirm tool from xda
updato.com
Updato is the best. No DL speed and has same firmwares as sammobile
Click to expand...
Click to collapse
Tnx Callumbr1, this helped a lot.
Related
Hi, I've gone through all search engines and am slightly confused whats going on.
I was trying to flash my sg2 today and it was at analyzing part of in my odin and was stuck at do not turn off warning, after waiting for 5 minutes, nothing happened. Googled it up. various places (including this) suggested removing the battery and restart. However I pressed the power button first to power it down.... removed battery, poped everything back in. no response on phone, tried hard reset combo, nothing, removed battery couple of times, just no response. I take the phone is bricked?
However what really makes me doupt is, I plugged phone into charger. phone was hot at that point. So I left it for another half hour, came back. It was still quite hot - i mean the cpu must be working to generate that kind of heat. So I am just wondering, is it still def bricked or since cpu is working there could be a way to it?
P.s. I know its carrier specific, but if I have insurance, will self flashing/upgrading ur phone without official release void the warranty?
small update, I removed battery for 15 minutes, to let it cool down, touched it, it was all cool, put the battery back in - and 5 mins later, the cpu area is all hot.....yet no buttons are working... at least the hard reset is not responding....
jtgizmo said:
Hi, I've gone through all search engines and am slightly confused whats going on.
I was trying to flash my sg2 today and it was at analyzing part of in my odin and was stuck at do not turn off warning, after waiting for 5 minutes, nothing happened.
REFLASH. usual fix .
Recovery Mode
Download mode ???
P.s. I know its carrier specific, but if I have insurance, will self flashing/upgrading ur phone without official release void the warranty?
Flashing stock Samsung rom may void sellers warranty but Not Samsung warranty .
Custom roms or rooting voids all warranty .
Flashing wrong rom may void warranty .
I would presume any flashing voids any insurance .
jje
Click to expand...
Click to collapse
JJEgan said:
jtgizmo said:
Hi, I've gone through all search engines and am slightly confused whats going on.
I was trying to flash my sg2 today and it was at analyzing part of in my odin and was stuck at do not turn off warning, after waiting for 5 minutes, nothing happened.
REFLASH. usual fix .
Recovery Mode
Download mode ???
P.s. I know its carrier specific, but if I have insurance, will self flashing/upgrading ur phone without official release void the warranty?
Flashing stock Samsung rom may void sellers warranty but Not Samsung warranty .
Custom roms or rooting voids all warranty .
Flashing wrong rom may void warranty .
I would presume any flashing voids any insurance .
jje
Click to expand...
Click to collapse
I cant get into download or recovery mode, since its not responding to any button combination nor is it recognized by pc when trying to use usb connection.
Click to expand...
Click to collapse
I should also clarify, it all went fubar after following these instructions for DarkyRom:
Unzip the BASE ROM into one folder. It should have a file PDA. Open ODIN now (I use 1.7), in the PIT file option, select the pit 512 file. This should automatically tick the repartition option in ODIN 1.7 (if not, make sure it's ticked). Select the PDA file in the PDA Box. Connect your phone to the PC, make sure it's connected. Click start, wait for it to finish. Close ODIN, let your phone Reboot.
Click to expand...
Click to collapse
you may need to try using the usb jig which typically forces it into download mode again. search "Samsung USB Jig" on ebay
jtgizmo said:
I should also clarify, it all went fubar after following these instructions for DarkyRom:
Unzip the BASE ROM into one folder. It should have a file PDA. Open ODIN now (I use 1.7), in the PIT file option, select the pit 512 file. This should automatically tick the repartition option in ODIN 1.7 (if not, make sure it's ticked). Select the PDA file in the PDA Box. Connect your phone to the PC, make sure it's connected. Click start, wait for it to finish. Close ODIN, let your phone Reboot.
Click to expand...
Click to collapse
Did you get the above instructions from This Link?
achillies400 said:
Did you get the above instructions from "This Link"?
Click to expand...
Click to collapse
Yes, thats the one
P.S. cant post links as new user, so edited ur quote
jtgizmo said:
Yes, thats the one
P.S. cant post links as new user, so edited ur quote
Click to expand...
Click to collapse
Dude you messed up, that ROM is not for the SGS2 and neither are the instructions, You need a Samsung service center or a de-bricking service
what?
Damn I cant post links, well I got to it via samsware 2.3.5 leak announcement, there was a link to darkys custom rom, from there there was at top Beta noob guide, I clicked english version, I landed on the page that was called: Beginners/noob friendly guide to flash any BETA release and from there I ended up on the ...Final v10.2 - Official DarkyROM - Gingerbread (JVQ 2.3.4) - Noob-Friendly...
sigh, i didn't see it mentioning not being for sgs2, and since I got there by starting from sgs2 article, I thought they are all linked....
I've sent it to service...
where did I go wrong....
When you go to return it, do not tell them you flashed it. Always worked for me just playing dumb.
Sent from my SGH-T959 using XDA App
yep, did that, I just said it froze and then stopped responding. They didn't ask anything just sent it off
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Can you get into download mode (power/home/volume down) ?
technotika said:
What a start to the day....
Sg2 would not turn on. Tried loads and then left it. Suddenly a few mins later
it came on but was hung on the boot screen. Now its turning on but just hangs
a frozen boot screen.
So thought I would use ODIN to wipe it and start a fresh. Odin also just hangs
at the start at NAND WRITE START cache.img and goes no futher ever.
I tried to do a restore in CWM but again hung and eventually failed with cant find file error messages.
Seems like internal memory is screwed or something any ideas?
Click to expand...
Click to collapse
Have you tried booting into download mode (as stated above), or using a jig? They cost a few dollars from Ebay, but they're a life saver in these such situations.
Have you tried to flash a different ROM? Maybe the cache.img is a dud or possibly corrupted?
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
I think a JTAG repair will probably be cheaper for you than paying Samsung to fix it. Do a search on here/Google to find a JTAG repairer close to you. If you can't find one near you, there's at least one that I know of you can post your phone to, have them repair it & they'll post it back.
technotika said:
can get into download mode but because a flash failed CWM is gone and just get "firmware update encountered an error".....just tried a different firmware download in odin..again hangs on NAND WRITE START....
read other threads with same error , not looking good
Click to expand...
Click to collapse
Since the phone already is in "has to be sent in anyways" state, I think this quallifies for the "last resort", only do this as last step before packing it in for sending to service.
Try an Odin flash with a .PIT file and "[X] Repartition" checked.
But be very carefull with that, double check and tripplecheck everything is perfectly set up (correct stock ROM for your model, USB connection could sustain an earthquake, PC will not crash or loose power.... all that stuff) because this could totally kill it when something goes wrong.
Well, once the preflight is done, hit the mighty "Start" button and start to pray.
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
technotika said:
Well tried ext option and hangs on setting partition. I'm worried the phone is actually proper broken since its not flashing or rom issues that was the original problem. Just went off, wouldnt turn on, left it a while...suddenly on but hanging on boot everytime..then the flashing attempts to realise more broken than ever! Will service fix that?, im with vodafone UK and they will be arsy if they find custom rom flashes etc? Can I send direct to samsung...? thanks for ur help peeps!
Click to expand...
Click to collapse
Are you using a single file when your trying to flash? I had an issue where it was stuck on the nand part, then I flashed using three files, PDA, Modem, Csc, and it was successful.
But seeing that you've tried repartition and that didn't work, you may be screwed.
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
Yeah, I tried to use a data cable that came with an HTC once. For some odd reason, it didn't work.
I've had Odin flashes go.wrong before and almost always fixed it by rebooting or restarting Odin. Maybe even try on a different PC. For me a 3 part file with pit + repartition has always done the trick.
However it does seem like your problem may be hardware related.
Sent from my GT-I9100T
ultramic said:
Are you using the original Samsung data/USB cable when you are trying to flash with Odin ? If not, do it.
Click to expand...
Click to collapse
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
HellcatDroid said:
Well, if it's that broken that nothing boots, nothing shows, nothing even flashes, I doubt they can see you got a custom ROM on it (Samsung could, but would very likely not bother checking).
So just tell them it failed during updating with KIES.
Since KIES is "teh craps" and everybody know that, they will likely go "oh yah, another one"
Click to expand...
Click to collapse
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
If they check that you might be in a bit of trouble warranty-wise. Or you might be lucky. If you can wait a few days or however long it takes to get a jig, might be worth getting one.
technotika said:
This is a very good tip, thanks lol, popping into a store at diner time.......
##update## actually download mode loads with custom rom count (24) oops and very new firmware so dont think can get round that?
Click to expand...
Click to collapse
technotika said:
I dont think I ever used the original lol have been flashing like crazy for the last 6 months fine?
Click to expand...
Click to collapse
Regardless, please try the original cable, you have nothing to lose.
For the first few months, I was flashing ROM's fine with an el cheapo usb cable from ebay then suddenly, Odin would always hang. Reverted to original cable and everything has been fine ever since. I have also noticed that the file transfers and Kies Backups are noticeably quicker on the original cable.
Given you can access download mode, I'm crossing my fingers for you that its only a soft brick. Also, try plugging in the usb cable to a port directly on the motherboard (ie not one of those front panel extensions), also try different computers.
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Depends on what version firmware you have on your phone/what you tried to flash. Do you remember either/both of those ?
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
technotika said:
I thought jigs didnt work after a certain firmware or are they're new jigs available?
thanks
Click to expand...
Click to collapse
They don't work the new bootloader, but if you got your ROMs from Intratech's thread, most of them have the bootloaders replaced with the old one.
You could also try to flash the old-bootloader-only .tar that is also in Intratech's thread if the jig doesn't work, maybe it at least manages to flash that one so you can reset the counter.
well it's officially knackered
tried original samsung cable - same problem
different computer - pit and 3 files plus single files , same problem
cant even flash any old bootloaders to reset the jig!
so gutted it ran my life for me schedules, to do, all sorts, oh well
goosed - thanks anyway
Hey guys
Just to let u know. Today I got Jelly Bean official update, on official unbranded phone in UK with original untouched software and after few hours phone got completely dead !!
Maybe wait with your update until more info will appear around UK.
oucccccch that sucks. did ya update through kies or OTA update via phone. If you have a rooted phone and attempted to update OTA it will fail. kies shouldn't give ya that issue.
If your phone is still running stock rom and zero binary counts. take it to Sammy store somewhere.
EDIT: remember if your phone is rooted you can always go to download mode and flash any Rom via Odin. it's not a problem.
hero000 said:
oucccccch that sucks. did ya update through kies or OTA update via phone. If you have a rooted phone and attempted to update OTA it will fail. kies shouldn't give ya that issue.
If your phone is still running stock rom and zero binary counts. take it to Sammy store somewhere.
EDIT: remember if your phone is rooted you can always go to download mode and flash any Rom via Odin. it's not a problem.
Click to expand...
Click to collapse
unfortunately my phone was pure untouched like a virgin, no nothing, even rooting. coz I had to many problems in the past. It was OTA update.
phone is completely gone. no reaction for nothing
eljon said:
unfortunately my phone was pure untouched like a virgin, no nothing, even rooting. coz I had to many problems in the past. It was OTA update.
phone is completely gone. no reaction for nothing
Click to expand...
Click to collapse
Call your carrier and complain! If its all stock then u should have no issues having them repair or replace it for u...
.:Sent from the Hellfire Galaxy of S & 3:.
da-pharoah said:
Call your carrier and complain! If its all stock then u should have no issues having them repair or replace it for u...
.:Sent from the Hellfire Galaxy of S & 3:.
Click to expand...
Click to collapse
I will definitely go tmrw. I hope it's very very rare case.
If you are one of those people who can't be bothered to waste 2 weeks on repair, you could try using a Jig. Thus hopefully allowing you to boot into download mode, and flashing stock firmware with Odin.
bortak said:
If you are one of those people who can't be bothered to waste 2 weeks on repair, you could try using a Jig. Thus hopefully allowing you to boot into download mode, and flashing stock firmware with Odin.
Click to expand...
Click to collapse
I will not try something I have no much idea about. I want to save that phone in perfect shape and sell.
in that case take it to sammy store. enjoy few days with crappy phone that they give you while your phone get fixd.
hero000 said:
in that case take it to sammy store. enjoy few days with crappy phone that they give you while your phone get fixd.
Click to expand...
Click to collapse
I bought it in Carphone W. I hope they give some replace crap My first time without smartphone since Xperia 1 !!!!! WOW
What are the symptoms? My first s3 shut off whole charging the other day and never turned back on. Had to get a replacement.
Sent from my GT-I9300 using xda app-developers app
tawheed12 said:
What are the symptoms? My first s3 shut off whole charging the other day and never turned back on. Had to get a replacement.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Sounds the same to me. In the morning I got OTA JB. I was charnging it in the evening. I think last time when I unlocked it and texted was around 11pm, and then after midnight no response. I took battery out for a minute. But nothing, no any sign, even after I plugged in. Nothing.
Recovery Mode
Try to boot into recovery mode. Turn phone off by taking out battery, put it back then press and hold(in the following order) volume down+home bottom+power, remember to keep them press until you see a screen that shows a yellow triangle with a warning sign, release all bottoms and press volume up. Them you will see recovery menu. If you can boot in recovery you are in luck and is something you can fix yourself with Odin 3.07 and a stock rom.
PR_Grim said:
Try to boot into recovery mode. Turn phone off by taking out battery, put it back then press and hold(in the following order) volume down+home bottom+power, remember to keep them press until you see a screen that shows a yellow triangle with a warning sign, release all bottoms and press volume up. Them you will see recovery menu. If you can boot in recovery you are in luck and is something you can fix yourself with Odin 3.07 and a stock rom.
Click to expand...
Click to collapse
tnx mate for that. Of course I know recovery mode. but no, nothing, phone is absolutely dead like stone.
eljon said:
tnx mate for that. Of course I know recovery mode. but no, nothing, phone is absolutely dead like stone.
Click to expand...
Click to collapse
Even charging does not work? Try taking out battery for a longer time and check again.
DoppelgängerGER said:
Even charging does not work? Try taking out battery for a longer time and check again.
Click to expand...
Click to collapse
even charging, no LED. I did try to take batt out for longer. Today I'm going to Carphone W to say what they can do about it.
Uploading....Coming soon
Hello everyone this is the official odin package for the galaxy mega ATT version. With this you can get your phone back working if you get the "This phone is not running authorized software crap. " etc . Also hope it encourages more people to find a root method without the fear of having a brick. As many of you know this package was nowhere to be found so I had to bribe a Samsung employee to give it to me which means it wasn't free for me but I'm sharing it with you guys so if you send me a beer my way i'll be happy not mandatory.
This package is in multiple parts:
I527UCUBNE7
AP: Must be flashed under PDA in Odin. This is the biggest file and contains your system,recovery and kernel partition Download
BL: This is the bootloader. If you already took the update ignore this but if you want to upgrade your phone you must flash this Download
CP: This is the modem and other network related partitions. You must flash this under Phone in odin Download
CSC: This contains carrier related settings for our firmare. Flash this under CSC in odin. Download
Highly Recommended to perform a factory reset after the flashing is completed. Let me know your results
Omg !! Super thanks bro !!!! =))))))))
So good !!!!! update successfully
Thanks again !!!
so the guys that have tried this can confirm that is working!
and also liked to know how root is being dealt with
latinohot said:
so the guys that have tried this can confirm that is working!
and also liked to know how root is being dealt with
Click to expand...
Click to collapse
Garack has been working on it and has actually posted a file to flash in Odin I beleive. He say that if it boots up, then root should be obtainable.
Not sure anyone has tried it yet.
It is in the "root bounty for 4.4.2 update" thread
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
im getting error last stage on system upload any advised ?
@ Sunderwear Thank you very much for the great post and instructions. I'm currently testing it out with my i527 AT&T with ODIN 3.09... will post results in a few minutes. My phone was stuck in reboot after official 4.4.2 AT&T update left it in loop mode... give me a few minuytes and I'll post my results!
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
alex852 said:
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
Click to expand...
Click to collapse
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Sunderwear said:
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Click to expand...
Click to collapse
Yeah, the screen was replaced a while ago. The phone went bad once it installed the 4.4.2 official update. I will try use some other usb cable. I have plenty of microusb wires. Do you think the screen has something to do with it?
Sunderwear said:
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Click to expand...
Click to collapse
Ok, I used a different port using also a brand new official/original Samsung MicroUSB cable to retest it. :crying: no work, again stuck in loop mode. Tomorrow, I will get another computer to retest this with another one. Will post the results tomorrow.
When the phone loops, I do not have any letters that appear anywhere besides the Samsung Galaxy Mega logo. it just vibrates, and then it restarts without showing any messages/letters.
You mentioned "Red letters at System Upload" is that when I hold Vol - and home? because I only get the blue letters if I do the Vol+ and home.
Thank you for your patience man. I'm sort of a noob, well, not sort of!
I haven't tried this yet...but I will back up tomorrow and report back how it goes with my unit...I still have my factory with no knox bootloader so far..and was debating if I want to even try really...
alex852 said:
Ok, I used a different port using also a brand new official/original Samsung MicroUSB cable to retest it. :crying: no work, again stuck in loop mode. Tomorrow, I will get another computer to retest this with another one. Will post the results tomorrow.
When the phone loops, I do not have any letters that appear anywhere besides the Samsung Galaxy Mega logo. it just vibrates, and then it restarts without showing any messages/letters.
You mentioned "Red letters at System Upload" is that when I hold Vol - and home? because I only get the blue letters if I do the Vol+ and home.
Thank you for your patience man. I'm sort of a noob, well, not sort of!
Click to expand...
Click to collapse
No worries. I was asking because the same happened to me with a customers phone..got screen replaced..then he took the 4.4.2 ota update..got stuck at samsung logo bootloop..i loaded the firmware like 4 times..re partition with pit file and erase all nand...I would get stuck in the same screen saying entering recovery..So it's an issue going around. Last resort would be sending it to Samsung
Sunderwear said:
No worries. I was asking because the same happened to me with a customers phone..got screen replaced..then he took the 4.4.2 ota update..got stuck at samsung logo bootloop..i loaded the firmware like 4 times..re partition with pit file and erase all nand...I would get stuck in the same screen saying entering recovery..So it's an issue going around. Last resort would be sending it to Samsung
Click to expand...
Click to collapse
Yes Sunderwear that will happen because there is 3rd parties making aftermarket screens and people were buying them as replacements...If you don't have the OEM screen the driver in the firmware won't work and it will hang...I run in to something like this on a Galaxy S4 I repaired...
alex852 said:
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
Click to expand...
Click to collapse
check your AP files size that was happen to me i download file wan;st complete than i download again and make sure file download complete
and after that use odin don;t need other file just select on PDA and let odin run after that every thing will bee fine
I ran it as instructed and it worked flawlessly. tHANKS [email protected]
Help!
Every time I try to use the PDA and PHONE files, it says they have an invalid md5 hash. I've tried re-downloading them, but to no avail. Could anyone help with this?
thanks.it works fine...
I did all the stepa and finally I have K.K. Just wanted to say- thank you.
USMAN_ZEESHAN said:
check your AP files size that was happen to me i download file wan;st complete than i download again and make sure file download complete
and after that use odin don;t need other file just select on PDA and let odin run after that every thing will bee fine
Click to expand...
Click to collapse
Sorry for the long delay. I think I found the full issue with the Samsung Glaxy Mega boot loop on 4.4.2
My phone is till not working. We own four 6.3 Megas (1 my wife, 1 daughter, 1 son, and mine).
Officially I have 2 that are not working properly and stuck on boot loop. My wife and daughter are working properly on 4.4.2 my son's now and mine are stuck in boot loop. Wife's phone has original screen and it's working properly, my daughter has a replacement screen I bought on ebay for about $160.00 on January. My son's I've replaced the screens about 3-5 times already (a ton of money wasted), and mine, recently I did replaced it on May (before the 4.4.2 update on June). Here goes the issue:
My son's phone updated today about 2 hours ago while we were visiting the AT&T store for U-Verse Quote. Did not know it updated until we got home... Sons' phone is stuck in boot loop also now!!!!!!!!!!!! What I did was I took my daughters phone apart (with expensive replacement screen and currently running 4.4.2), and installed the screen on my sons and then mine, and each phone would work flawlessly with that screen, so I took the current replacement screens I had from my phone and my son to install them on my daughter's and each one would go into boot loop.
After that, I re installed the good screen on my daughters back, and daughters work properly again. I guess the generic OEM screens from eBay I've been buying for $50 bucks are not compatible with 4.4.2 Kitkat, they are only compatible with 4.2.2 Jelly bean.
Anyone knows where I can buy original screens? I've contacted several sellers on eBay to see if the screens work on 4.4.2 because I don't want to spend more money on screens. I just got 1 from China 2 days ago, and that one also gets stuck in boot loop... so frustrated with screens. All my OT from work goes to pay for these issues... Help anyone? Anyone sells working 4.4.2 compatible screens?
Also, I will buy a broken ORIGINAL screens from ebay (like $7-$10) to test it out and verify. I will post results. Hope this experiment (and my sadness) will help you guys out if stuck in boot loop.
P.S. Oh yeah, I did do both phones on PDA, then all BL,PDA, etc... and I still get boot looped. I have to say THANK YOU to the original autheor because it does work! It's just my screens that doesn't work!!!!! HELP GUYS!!!!!:crying:
Is there a certian order u need to flash these in?
Any short tutorials..
Ive flashed odin pda only b4..
Have to factory reset first?
Thanks guys.
Hello,
I've purchased a Galaxy Tab S6 (SM-T865N) International version, mainly to use it with with 4G in US on Xfinity Mobile. I received the tablet, inserted the SIM card and it was working 'relatively' on the network. Every now & then I would get a message 'failed to register to network', but for the most part, mobile data is working.
Since it is a Korea version, certain things don't work. Nothing major, but I would like to make it perfect. Certain User update posts in the Galaxy store display in Korean Language, and the weather app is slightly limited, with the error 'not available outside of Korea'.
I did some searching and found other firmware available for this exact model on Sammobile. My country (US) is not supported, but I would like to try the UK firmware, if nothing else, to fix some of the language issues. I downloaded the UK firmware package and Odin (3.13 & 3.14.1). I installed the Samsung drivers. I booted the tablet into recovery by holding 'power & volume up' then connected it to the computer. Odin WILL NOT found the tablet. I rebooted into the normal OS and connected it and Odin then found it, but obviously that doesn't work. I can not get Odin to connect while in recovery.
Does anyone have suggestions on what might be happening?
And maybe all this effort isn't worth it either, hard telling whether it'll work better or worse with the UK firmware on it. Any tips?
It's been several years since I did this sort of thing, so I'm a little rusty. I thought this would be a simple procedure.
it sounds to me like you are not putting it into download / Odin mode, but I could be wrong. I haven't tried to use Odin on this tablet yet, but was actually about to do this same thing as well, as my device has an origin CSC of singapore, and hasn't had an official update in almost 2 months, so I was going to flash the UK version as well.
---------- Post added at 07:58 PM ---------- Previous post was at 07:51 PM ----------
So I just tested it on my tablet, here is what you need to do:
Power off the device
Press and hold the Volume up button and then press and hold the power button
When you see the initial boot screen, release the power button, but keep holding volume button
When you get to the recovery screen, you need to use the volume up / down buttons to highlight the option that has "bootloader" in the title, and press the power button to select it.
Then you should see a screen that says "Download" or something like that.
Plug in USB, and Odin should see the device.
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Your correct
bartleby999 said:
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Click to expand...
Click to collapse
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
I did a lot of reading before I rooted this Tab and that piece of Info came from This thread.
fallingup said:
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
Click to expand...
Click to collapse
Sorry, I dont. I meant to make that post in another thread. I have not flashed anything on my device yet.
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
buafnan said:
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
Click to expand...
Click to collapse
Did you able to flash that firmware on your tablet?
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
buafnan said:
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
Click to expand...
Click to collapse
Have you tried reflashing the old firmware of your country? Weird that its not working.
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
buafnan said:
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
Click to expand...
Click to collapse
Can't you put in a warranty claim ? Here where i am based i had a new battery, and new screen installed from samsung! this was a Galaxy S8+ was well over 2 years old they did it for free! New screen and new battery! My Note 9 is going this monday for a new battery my Tab S6 works flawlessly so don't need to send that in! but i'm sure if you ring up Samsung they will replace the motherboard for free as it's not even 12 months old!