Hello,
I try to flash this box with the last rom, but when i try to flash over usb or sd card i got an error "could not load /volume/misc"
Anyone have the last rom to flash over usb tool or any other way to recover the box ( atm i have the rom from geekbuying ( it's terrible ))
Thanks a lot!
Related
Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?
Pictures of the board
https://imgur.com/a/ODPBNoZ
joeshmoe1 said:
Hello, attempting to flash [S905X][FINAL]atvXperience seems to have hard bricked my Beelink Mini MX II III. Flashing failed with an X in front of the android guy, and now the box shows no signs of life. Any ideas for a fix?
Pictures of the board
https://imgur.com/a/ODPBNoZ
Click to expand...
Click to collapse
Same hear, thats will happen when we flash some Andriano ROM and whatever they are called!! Nooobies rom
I have this device, try my android tv 9 rom and here is a video i made of how to unbrick your box
And see my rom here https://aidansrom.ml
aidanmacgregor said:
I have this device, try my android tv 9 rom and here is a video i made of how to unbrick your box
And see my rom here https://aidansrom.ml
Click to expand...
Click to collapse
Your rom bricked mine device. Mine device dont have TP
Formingus said:
Your rom bricked mine device. Mine device dont have TP
Click to expand...
Click to collapse
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make
aidanmacgregor said:
TP? not sure what you mean here, and are you installing using USB Burning Tool? this is the only way to upgrade to android 9, the SD card method wont work as android 9 has significant changes to partitions that the SD card method cant make
Click to expand...
Click to collapse
Actually, i write to you on message and on the forum also and describe mine problem. Probably you didn't get or missed.
Downloaded all your ROMs for s905x and decide to test them.
Flashed few times two ROM's and everything was OK. Flashing via USB Burning Tool
1.[v7.5] (Nexbox) Aidan's ROM [S905X] Nexbox a95x 1GB 2GB+.img
2.[v7.5] (UNIVERSAL) Aidan's ROM [S905X] 1GB 2GB+.img
After i flash [v7.5] (MXQ) Aidan's ROM [S905X] [P212, P214 & P242] MXQ Pro 4K 1GB 2GB+ (720pUI & 210DPI).img
Box won't go anymore in Recovery mode.
USB Burn Tool will not recognize as a device anymore even reinstalled LIB Drivers and tested on 2 PC with Win 7 and Win 10
Via SD Card will not be recognized too - Fashing not start at all possible due missing recovery.
This Box don't have TP. There was no need to press the reset button to be connected when i flash with success, only inserting USB was enough. Now Box will start and hang on Aidans TV Logo and stay there forever. About Hardware its not 100% .
Mine Box is Beelink Mini MXIII 2GB-32GB S905X AnyHelp will be appreciated.
This is mine Box from hardware
Formingus said:
This is mine Box from hardware
Click to expand...
Click to collapse
Heres My Board & Points To Short
Your browser is not able to display this video.
Try just waiting.
Open USB, load other image which you knows it worked before, press Start immediately in USBT, than plug in your USB A-A and push the recovery button with toothpick. And than just wait. 5-15mins
Works every time with my box. No need to short anything.
T95 S1
Mem 2/16
Build TS10022
Ver. 7.1.2
Wifi SSV6051P
Flash PFC-10AL
I managed to brick this one after i tried to install super su
I will not boot at all even with the sd card, the USB tool seems to see the box every time i plug it in with the usb cable. i have tried i believe ever IMG I was able to find for the 905 all fall at Uboot some before.
Any help would be nice i have been reading for almost 2 weeks on this one to the best i can comprehend
I do have 2 T95Z plus boxes 1- 2/16 and the other 3/32 both with Posion thank you Ricky
And A T9 with the RK3328 i messed up but found a firmware that finally worked on it
Thank you if you have any Ideas if not i can donate it to Ricky if he wants
Ok i went ahead and bought second T95 S1 2/16 same as the 1 above I need some help to boot TWRP on it and how to get a full back up img that i might be able to use USB Burn tool to fix the first 1 if that is possible.
I have tried to read about it
1st try was to take twrp img rename it to recovery on an sd card and press rest button and power up with th sd card in no go
2nd try was to install the twrp manager and install it from there no go
3rd try was to install a terminal app Typed SU the typed reboot recovery with twrp on sd card still no go that worked fin on my T95Z plus but not this T95 S1
Thank you for any help
OK so far i have not been able to get a TWRP that i can backup the good matching box I have tried half dozen or more
2.8.5.1_K200 sticks at the T95 logo
3.2.3.0 sticks at logo
S905W_TWRP_alpa boots but nothing in the back up section does not mount my SD card but see's a USB stick
TWRPq201_N-3.2.1.0 Split screen still does not have any thing to check under backup doesnot seem to mount anything but the usb stick
I Have tried Rickys AMLogicFlashTool Port TWRP tab
Selecte Pull recovery from device then create recovery and it goes to 40% and stays there I did not check the box Flash after porting
Im not sure if there is another way to do a complete back up in windows with this box
Thank you anyone
Update I was able to flash an img that Mergoo69 over at Atvxperience was able to get from the vendor box is back to stock
Hope this helps someone with a T95 S1 his img says 1/8 mine is a 2/16 but seems to work fine took USB burn tool abot 5 minutes to load. Hopefully someone can use this img to port this to 1 of the great roms
Jerryjr200 said:
Update I was able to flash an img that Mergoo69 over at Atvxperience was able to get from the vendor box is back to stock
Hope this helps someone with a T95 S1 his img says 1/8 mine is a 2/16 but seems to work fine took USB burn tool abot 5 minutes to load. Hopefully someone can use this img to port this to 1 of the great roms
Click to expand...
Click to collapse
Do you have a link to the ROM for the 1/8 version?
Its over at atvxperience forums under S905W thread Sunvell T95 S1 posted by Mergoo69 he or she was able to get it from a vendor. i Dont think im allowed to post links or upload files
Its on the first page 5th post
mousemat said:
Do you have a link to the ROM for the 1/8 version?
Click to expand...
Click to collapse
better late than never, right?
https://drive.google.com/open?id=11aBbXsaXy1aK3-b3PW9EsUVehOQKYU8F
Hi All!
I was wondering if there is a way for me to recover my X96 MAX TV BOX (S905X 4Gb RAM, 64Gb ROM).
I tried to install atvXperience ROM following this post https://forum.xda-developers.com/android-stick--console-computers/amlogic/rom-atvxperience-ultimate-androidtv-t3808053/page47.
Unfortunatelly i had errors during the process and i accidentaly selected 'Erase all' while using usb burning tool 2.1.6. The result is that my box is not booting up and recovery mode is not accessible.
Thank you for helping.
Regards
atacraft said:
Hi All!
I was wondering if there is a way for me to recover my X96 MAX TV BOX (S905X 4Gb RAM, 64Gb ROM).
I tried to install atvXperience ROM following this post https://forum.xda-developers.com/android-stick--console-computers/amlogic/rom-atvxperience-ultimate-androidtv-t3808053/page47.
Unfortunatelly i had errors during the process and i accidentaly selected 'Erase all' while using usb burning tool 2.1.6. The result is that my box is not booting up and recovery mode is not accessible.
Thank you for helping.
Regards
Click to expand...
Click to collapse
Following the second method on this link https://droidboxforums.com/threads/x96-max-firmware-links.14717/ solved the issue for me ... may be it means that atvXperience ROM is not compatible with my box or there is a compatibility issue using some versions of USB burning tool with the named BOX.
How did you do ? I have the same problem
Hello,
After trying to flash a Nexus rom on my tvbox, It bricked ( red led, not image, reset only working if I short 2 pins on the Nand ) . Now I can't find any rom for it, all of the firmwares I had tried to install stuck at 7% ( [0x32030201]Uboot/Get result/Disk Initial error ) with Usb burning tool. As for the SD card tries with Burn card maker, they do try to load the firmwares but stop at like 2-3 percent.
Is there any working, be it even stock firmware for this revision ?
Thank you.
Hi. Tested on my rev.2.3 if still looking for it
https://mega.nz/#!7IsxCKCS!ZDzQ9P3cCnmKjnl9s5dRJAFJTvGnxvxLSImlZr2PiHQ[/url
hi have you got the key for mega?
One year later bump. I bought a Tanix TX3 last year since I couldn't find a fix to my issue with the M8S Pro W but today I found the box while doing some cleaning so why not post again, maybe someone can help me with this bricked box issue.
Getting this error with usb burning tool with all the IMGs ( even Lunn ones ): 7% ( [0x32030201]Uboot/Get result/Disk Initial error ) M8S Pro W rev 2.3, p21x blue board, Spectek nand.
My original post from other forums:
Mecool M8S Pro W rev. 2.3 after trying to flash the Nexus rom on it. It bricked, red led, black screen, reset working, the only thing that worked was shorting the pins on the Nand flash. Now it gets detected by pc everytime I plug the usb into it. But...I can't find any good images to flash on it ( tried more than 15 of them ). Most of them get stuck at 4% with Usb burn maker or 7% ( [0x32030201]Uboot/Get result/Disk Initial error ). 90% of them aren't bootable with SD card maker, and those who do work, get stuck at like 2-3% on tv at "upgrading..." ( Lunn-NHG47L-20190418.114957.V0213.img , this one is among the few that is accepted by the tvbox on the SD card ). I am running out of ideas on how to get it working. Can anyone help me with a good firmware image ?
The board has a P21X motherboard and someone from another forum told me that I have SpecTek MLC-Nand FBML95B71KDBABH6-10AL
https://i.imgur.com/9YDyo4m.jpg
Edit: these are the IMGs I have tried so far =>*https://imgur.com/Yebndyl
Hi. Another link to download . img
https://mega.nz/file/7IsxCKCS#ZDzQ9P3cCnmKjnl9s5dRJAFJTvGnxvxLSImlZr2PiHQ
If its s905x you can try my rom
https://youtu.be/0uci6Rl70t4
Hello there! Ive got problem with boot of my device or/and problem with USB Burning Tool.
First of all ive tried few hours to put right image to my device. When i tried with S905W but got problems with Uboot in USB Burning Tool ("0x32030201]Uboot/Get result/DiskInitial error". But i tried S905X and it went well but only when i uncheck erase flash and boot sections. That was the only way to finish burning correctly. And of course its not working and hanging on Aidens Rom Logo (i was w8ing more than 5 mins).
When i check "erase flash and boot" sections ive got those mostly
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[0x00101004]Erase bootloader/Lowper/Identify/Error result
And yes ive done the Mask Rom thing :/
Pls help
Anyone?
only thing ican suggest is keep trying roms, maybe s905x will stick, it has for a couple of people before
Hi all,
Model : Wechip V8
Cpu : Amlogic S905W
Ram : 2GB Rom : 16GB
They have installed a different version on this device. The remote does not control, does not find wifi, does not connect to ethernet. I couldn't find original software. I found some stuff but I couldn't install it.
can you help me?
Thanks
I have been using W95 S905W android box since early 2018. Over that time, I have tested multiple firmware on it and all the compatible ones have worked without issues. Eventually, I reverted to the stock and used it for about 2 years. One day, I noticed lagging on the device and decided to reboot it but it didn't power on. Since September last year, I've been trying to flash the stock rom and the rest that had worked before but I have not succeeded. I'm getting the error uboot/get result/diskinitial always at 7%. The box is successfully connecting to my computer even without pressing the reset button. Does anyone have a solution to this problem? Thanks.