I've a problem. before my note4 brick. i had flashed with rom snapdragon. then i follow to unbrick tutorial . my step stuck in this picture (phone not detected) while i hold down volume button and connect usb cable. nothing bar in progress. please i need help with my note4. i used sp flash tool
Related
i have lenovo a3000 with the latest firmware upgrade
yesterday,i charge it in power off and when i wanna turn on it a3000 wont turn on
no indicator battery,cant power on,but detect on device manager (i pressed power+volume up but just for 2 second and the driver [mtk usb com] dissappear)
so i download factory rom n the latest sp flashtool
i found problem in download the original rom on sp flashtool
the code error 4001
i think its driver problem
then i follow yuweng guide http://forum.xda-developers.com/show....php?t=1943442
i cant find Test Point on my pcb tab
any ideas?please help me :crying:
Could someone tell me how to unbrick sp6820a spreadtrum (minis 7100 ) phone, remeber I press home button and plug usb cable to flsh in reaserchdownload but this time it won't come out in anythings including flash screen.
I've done with backup on backuptools.apk before it is bricked. Fastboot even not working and CWM also for last time where I suppose to use researchdownload as tools.
It is actually been hard bricked.
Thanks.
Hello,
I flashed a ROM with sp-tool but the phone does not open. I power it on but nothing happens, no vibration, no screen flashing nothing.
Now I try to reflash the stock ROM but:
If I connect it it to PC it is recognized as MTK USB Port instead of MediaTek Preloader USB VCOM and SPTools returns DRAM failed error.
I tried removing the battery and connecting it, pressing VOL+ etc but the same happens.
I read this guide http://forum.xda-developers.com/showthread.php?t=1943442 but I could not do something. I found in the guide a link in a Russian forum where they talked about flashing the preloader using the board's PINs, but the translate does not give me quality information on how to do this
Any ideas?
Thank you
ShadowReaperGR said:
Hello,
I flashed a ROM with sp-tool but the phone does not open. I power it on but nothing happens, no vibration, no screen flashing nothing.
Now I try to reflash the stock ROM but:
If I connect it it to PC it is recognized as MTK USB Port instead of MediaTek Preloader USB VCOM and SPTools returns DRAM failed error.
I tried removing the battery and connecting it, pressing VOL+ etc but the same happens.
I read this guide http://forum.xda-developers.com/showthread.php?t=1943442 but I could not do something. I found in the guide a link in a Russian forum where they talked about flashing the preloader using the board's PINs, but the translate does not give me quality information on how to do this
Any ideas?
Thank you
Click to expand...
Click to collapse
Hi. What you did is to brick your preloader. It seems to me that your phone is made after 03.2014.
What you have to do is:
1. reinstall the driver. Follow the tutorial from here: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-mt6589-device-hard-bricked-t2890675
2. download the good preloader from here: http://forum.xda-developers.com/len...cked-flashing-wrong-rom-doesnt-t2749683/page4
3. replace the preloader from your downloaded ROM with the one from step 2.
4. Start SP FLASH TOOL and load scatter file
5. Check DA/DL WITH CHECKSUM
6. Flash it normaly now.
7. Good Luck
8. Waiting for feedback....
The same.
The phone is recognized as MTK USB Port and the SP-flash returns DRAM failed
ShadowReaperGR said:
The same.
The phone is recognized as MTK USB Port and the SP-flash returns DRAM failed
Click to expand...
Click to collapse
Hi. Can you tel me what was your STOCK ROM?
And what SP FLASH TOOL are you using ?
stympy said:
Hi. Can you tel me what was your STOCK ROM?
And what SP FLASH TOOL are you using ?
Click to expand...
Click to collapse
Merimobiles told me that this was the original rom
www.needrom.com/download/lenovo-p780-2
I tried varirous versions of SP Flash Tool
I think that the only option is to hard-flash it using the pins from the board
ShadowReaperGR said:
Merimobiles told me that this was the original rom
www.needrom.com/download/lenovo-p780-2
I tried varirous versions of SP Flash Tool
I think that the only option is to hard-flash it using the pins from the board
Click to expand...
Click to collapse
Try this: READ THIS TWICE TILL YOU UNDERSTAND :
1. Download SP FLASH 5
2. Download you ROM from here(not optional): http://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
3. Open Flash Tool 5 load scatter file from the ROM you downloaded.
4. Select only the preloader.
5. Under the big Download button select firmware upgrade
6. Now press BIG DOWNLOAD BUTTON.
7. The preeloader should flash.
8. Now after flashing the preloader you must check all others except preloader.
9. Under the big Download button select just download only.
10. Press BIG DOWNLOAD BUTTON.
11. Now your ROM should start downloading in your phone.
12. After downloading is completed your ROM should start .
13. Good Luck
14 Waiting for feedback.
wanna use ur method
Hi, I will try your method on my brick lenovo p780 4g. Wish me luck. Thanks.
:fingers-crossed::fingers-crossed::fingers-crossed:
alongbalbol said:
Hi, I will try your method on my brick lenovo p780 4g. Wish me luck. Thanks.
:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
I wished on your original post !
Hello guys. Please help me, I just bricked my Samsung S5 clone when I used MTK Partition APK. I clicked on 2GB and then it rebooted. Now its dead and only thing i can do is to get to this menu. Problem is that no option is working or seems to do anything. When i try to power it up, only backlight is visible.
Options are:
Recovery Mode
Fastboot Mode
Normal Mode
And its even upside down ! Please help me.
NEW INFO:
I tried every possible button combination when connecting USB cable to it. It keeps connecting and disconnecting with MTK Preloader USB. I tried SP Flash Tools, MTK Flash Tools and MTK Droid Tools. Nothing seems to work. Please can anybody help me ? I think that telephone itself is not dead and its only software brick. But i cant handle this alone.
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
reggiexp said:
Hello
I have trouve flashing twrp on my leagoo z5 mt6580 with Android 6.0
Kingroot doesn't work
And there is a file on needrom for twrp but i can't flash it. Maybe because i don't understand sp flash tool
If some one could be so nice to explain to me how to get it working.
I tried many thing. But sp flash doesn't do anything when i press download...
Thanks in advance.
Click to expand...
Click to collapse
SP Flash Tool works through preloader. Usually when you power up your phone, preloader kicks in first and sets up it's own device on USB port. You have a split second to start talking to it, otherwise it will load the next part of software, which will set up another device on the port.
What do you have to do:
Double-check your USB cable! Cable problems can lead to weird errors in SPF tool.
Shut down your phone completely, remove/insert the battery after it to be 100% sure that the phone is shut down.
Set up SPF Tool, hit download button
Connect your phone to PC via USB cable
At this step, your phone should power up, but if it doesn't in reasonable time (say, 10 seconds), press the power button to switch it on
If everything done right, the following happens:
Your PC finds "mediatek preloader" device or something similar
Red progress bar starts running in SPF tool, it means DL helper firmware is being transferred to the phone
Blue (or green) progress bar starts running, indicating your data being downloaded
A window with green circle appears, your data has been uploaded successfully