Andriod versio 6.0
build # RCT6303W87m7 or manual shows (RCT6303W87mdk)
I try every root app try to get root, but they all fail. even supersu.zip
mirco usb connect to pc, i can not find the driver,
recovery mode i backup system into sd card and transfer to my pc but i cannot open it from my pc
Quote:
Originally Posted by Jadevinicole
hey all,
so i'm still trying to root the RCT6303W87M7. i'm not really trying to install custom roms on it, i just want root access. so to update, i finally got my pc to recognize the device; but i dont beleive that it's recognizing it properly. here's what i did, making sure that USB debugging & OEM unlocking are both enabled in the developer options, i did this:
1. hold the 'power'+'volumeUP' buttons until you get into recovery mode
2. once in recovery mode, go to and select 'Reboot to bootloader'
3. when the 'Fastboot mode' message appears at the bottom of the screen, plug in the USB-A male to male cable to the PC
4. if you have your device manager open, you will notice that it is recognized as 'Android Phone'/'Android Sooner Single ADB Interface"
i tried rooting with three different 'one-click root' pc applications: iRoot(v1.8.8), Kingoroot(v1.5.0), and King Root(v3.5)
these are the results i got:
-iRoot: it connects but the message reads 'Not support mode'
-Kingroot: it detects the device and trys to connect but gets stuck in a loop trying to connect
-Kingoroot: this detects the device as 'HTC Device'. i click the 'Root' button and it trys to root, but it only gets to 19% and then it fails
i'm theorizing that maybe if i get some different drivers for the pc or maybe making sure that the 'one-click root' applications are the latest versions might help. i dont know, we'll see.
again this is for the RCA RCT6303W87M7 running Android 6.0.
if anyone tries this and has more success, please let me know.
so to update on this, updated and installed the latest versions of the 'one-click root' applications and got the same results as before. let me know if anyone else tried this.
this is for RCA Viking Pro, model RCT6303W87M7, Android 6.0
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
that's what i posted in another thread
Any luck rooting this device? Would love if there were some custom rom that was downloaded. Don't use all the Google apps installed.
---------- Post added at 07:16 PM ---------- Previous post was at 07:14 PM ----------
a753901936 said:
Andriod versio 6.0
build # RCT6303W87m7 or manual shows (RCT6303W87mdk)
I try every root app try to get root, but they all fail. even supersu.zip
mirco usb connect to pc, i can not find the driver,
recovery mode i backup system into sd card and transfer to my pc but i cannot open it from my pc
Click to expand...
Click to collapse
Still no luck with rooting this device? Would be awesome if some custom rom were made too.
getting to root and custom image
Jigga2g said:
Any luck rooting this device? Would love if there were some custom rom that was downloaded. Don't use all the Google apps installed.
---------- Post added at 07:16 PM ---------- Previous post was at 07:14 PM ----------
Still no luck with rooting this device? Would be awesome if some custom rom were made too.
Click to expand...
Click to collapse
I have not rooted anything without a how-to. Prehaps someplace there is a how-to to do this but this is what makes sense to me:
My New Motivation:
At this point my issue is that the unit has not had any updates including security since i purchased it. I really expect more and it's to the point where I feel it might actually be more secure rooted than not.
Originally
I just searched , saw it could not be rooted easily and was like whatever.
Ideas about how to get started
Get the adb tools working and using those get as much information from the prompt as possible without root and share it all.
If factory ROM images are around or can be backed up from device then prehaps a disassembly of the ROM images and examination of settings files will reveal any interrupt hooks for getting root that are as of yet undiscovered.
Gleaning any information from online sources .. prehaps a tear down of the unit, we need to find the most similar models to this model family.
See if there is any information available from the OEM. Determine who did the Android build. ....
What do you think?
Related
My Atrix is on 2.3.4 (non-root , locked bootloader).
But when I do an OTA update , the phone goes to update screen (Black screen with small android and the box) but then the box become a big <!> sign then it restart itself.
I tried factory reset , remove sim card and SD card. But it didnt help.
Any idea ?
Same here.
---------- Post added at 04:27 AM ---------- Previous post was at 03:45 AM ----------
Finally figured out how to do this:
1. download Automated Update (PC Users Only) from this link:
http://www.motorola.com/Support/US-EN/Android_Products/ATRIX-4G_Software_Update_Page
2. Make sure Atrix's USB connection set to Windows Media Sync.
3. Run the Motoroal Software Update, then you are all set.
same here...i tried OTA and PC way both do the dame thing as you described
try to unlock your bootloader with fastboot.
Hi I recently bought a iView SupraPad i700 (you can find it on newegg) it's a nice tablet, but there are limiters that have been put in place in various areas that make it difficult for some of my apps to work right(like setting storage to the sdcard instead of internal) . another issue is the volume which I can't change without rooting. I've tried a list of root tools none have worked does anyone here have any idea on to start rooting this device? (I'm new to this so please don't kill me)
info:
android version: 4.4.2
build number: z2520_i700_20140716
Okay I've tried towel root, Impactor and vroot. I'm out of normaly means anyone have another program or process I could try?
MusicaX79 said:
Hi I recently bought a iView SupraPad i700 (you can find it on newegg) it's a nice tablet, but there are limiters that have been put in place in various areas that make it difficult for some of my apps to work right(like setting storage to the sdcard instead of internal) . another issue is the volume which I can't change without rooting. I've tried a list of root tools none have worked does anyone here have any idea on to start rooting this device? (I'm new to this so please don't kill me)
info:
android version: 4.4.2
build number: z2520_i700_20140716
Okay I've tried towel root, Impactor and vroot. I'm out of normaly means anyone have another program or process I could try?
Click to expand...
Click to collapse
No answer from me... hoping I would find something here on XDA forums. The i700 is on sale for $45 with Newegg... not sure if I want to pull the trigger for something that I can't root (need Airplay functionality).
MusicaX79 said:
Okay I've tried towel root, Impactor and vroot. I'm out of normaly means anyone have another program or process I could try?
Click to expand...
Click to collapse
Thought of some options for you:
1. ROOT GENIUS: http://www.shuame.com/en/root/
Root Genius may give you problems while downloading via Chrome.... download and install via Internet Explorer.
2. KINGO ANDROID ROOT: http://www.kingoapp.com/
3. OEM Path that supposedly works for the iView 754TPR tablet:
Download the firmware ZIP file from here (Z2520_i700_20140716_CTS_MR.zip which is about 664MB) http://www.iviewus.com/download/firmware/
or here:
http://www.iviewus.com/download/firmware/i700/
Follow these instructions:
How to root the Iview 754tpc tablet (from HERE):
1. go to system settings, and then go to "Backup and Restore",
Then press "reboot into Recovery mode". - Note: This will only work in recovery mode.
2. select the factory reset option.
3. reboot device.
4. go to "on your PC" IVIEWUS -.
5. Download winzip from iview's page. - If your don't already have it.
6. Install winzip.
7. click on the link below the winzip link. - Note: Download will take an hour, depending on how fast you wifi is.
8. Then fallow step-by-step instructions that comes with 754tpc.rar download.
Now I have downloaded the i700 zip file and it has plenty of files in them which I'm not sure exactly how it will allow you to gain ROOT access with the above OEM method:
07/16/2014 04:21 AM 9,503,744 boot.img
07/16/2014 04:21 AM 12,137,472 droidboot.img
07/16/2014 04:20 AM 12,137,472 droidboot.img.POS.bin
07/16/2014 04:22 AM 6,805 flash.xml
05/25/2014 07:27 PM 2,031,600 IFWI_CLVP_CEAX_GB7_G01_EXT_F9_F8_WW20.bin
07/16/2014 04:21 AM 1,844,736 logo.bin
07/16/2014 03:50 AM 1,163 partition.tbl
07/16/2014 04:21 AM 11,539,456 recovery.img
05/25/2014 07:27 PM 99,296 SIGNED_CLVP_CEAX_GB7_FwDnx.bin
05/25/2014 07:27 PM 99,296 SIGNED_CLVP_CEAX_GB7_OsDnx.bin
05/25/2014 07:27 PM 880 SIGNED_CLVP_CEAX_GB7_SOFT_Fuse.bin
07/16/2014 04:21 AM 1,220,056,584 system.img
07/16/2014 04:04 AM 41,788,104 userdata.img
Now, these files all appear to be what you normally get in a Googles OEM versions of Android... *.IMG files that can be flashed with FASTBOOT, assuming you have access with your tablet to recovery. But does it give you ROOT access? I'm not sure, as I'm a noob at all this with plenty of trial and error until I give up (with the precious time that I already have).
I reviewed the similar TAR file that came with the example (Download 754TPC.rar here), and it included an IMG file along with LiveSuitPack_version_1.09_20120301 software. No clue what it does, but I noticed a DLL file called "roottools.dll". Perhaps that's the help that's needed to crack open this tablet if the initial 2 methods above don't work.
Give it a try and let me know how it turns out.
Thanks.
Really nice tablet, well built, 2GB Ram, 16GB internal sdcard, dual core Intel, hard to beat for $45, I got mine yesterday from newegg rooted it, and haven't set it down, I really like this tablet.
http://slickdeals.net/f/7398848-ivi...w-google-wallet-checkout-free-shipping?page=2
Sent from my i700 using Tapatalk
vampirefo said:
Really nice tablet, well built, 2GB Ram, 16GB internal sdcard, dual core Intel, hard to beat for $45, I got mine yesterday from newegg rooted it, and haven't set it down, I really like this tablet.
http://slickdeals.net/f/7398848-ivi...w-google-wallet-checkout-free-shipping?page=2
Sent from my i700 using Tapatalk
Click to expand...
Click to collapse
How did you root it?
EDIT: I read your link. Which recovery did you use from myKIT_BATCHV1.1.x? I do not see IView model there.
ThatsABigOne said:
How did you root it?
EDIT: I read your link. Which recovery did you use from myKIT_BATCHV1.1.x? I do not see IView model there.
Click to expand...
Click to collapse
There is only one recovery, the recovery used is my recovery I built for dell venue 8.
Start reading at post 2268 you will see we talk about iview.
Sent from my i700 using Tapatalk
vampirefo said:
There is only one recovery, the recovery used is my recovery I built for dell venue 8.
Start reading at post 2268 you will see we talk about iview.
Sent from my i700 using Tapatalk
Click to expand...
Click to collapse
Wonderful. I can't wait to get my tablet. If there are any questions, I will hit you up in the other thread.
Need help with rooting iview i700 in windows 7 enviroment
Hi I'm new to rooting and I read other threads about the iview i700 and I installed the drivers and used cwm program (myKIT_BATCHV1.1.2) and every thing connects and turns green but when I try the A2 option it says no program found so I'm kinda stuck on what to do now. I downloaded super user and am not sure how to install it. I also downloaded the SDC_INTEL2_ROOTKIT.7z and tried the rootkit option but that failed. Can anyone give me step by step please. I would greatly appreciate it. Thank you for your time.
madmcgee said:
Hi I'm new to rooting and I read other threads about the iview i700 and I installed the drivers and used cwm program (myKIT_BATCHV1.1.2) and every thing connects and turns green but when I try the A2 option it says no program found so I'm kinda stuck on what to do now. I downloaded super user and am not sure how to install it. I also downloaded the SDC_INTEL2_ROOTKIT.7z and tried the rootkit option but that failed. Can anyone give me step by step please. I would greatly appreciate it. Thank you for your time.
Click to expand...
Click to collapse
I have uploaded a Linux version of tethered cwm recovery method. Perhaps it will work for you.
http://forum.xda-developers.com/dell-venue/general/linux-tethered-cwm-recovery-version-t2963104
vampirefo said:
I have uploaded a Linux version of tethered cwm recovery method. Perhaps it will work for you.
http://forum.xda-developers.com/dell-venue/general/linux-tethered-cwm-recovery-version-t2963104
Click to expand...
Click to collapse
Thanks I'll give this a try. Much apreciated. Just wanted to root so I can move my apps to SD card
Hi guys, I just bought the iview i700.
I want to root it but, I'm not to sure about the step-by-step for this tablet. I've downloaded and installed the correct drivers (my windows or my linux computer can access the tablet).
I copied the "UPDATE-SuperSU-vX.Xx.zip" and the "Venue_8_WiFi_KK4.4.2v1.33_FLASHPKG" on my microSD and put it in my tablet.
Now, how to run run the IntelAndroid-FBRL-01-17-2015 ?
If i run it with my tablet turned-on (normal mode) It doesn't find my tablet.
as read on the i700 firmware update manuel :
While the IntelAndroid-FBRL-01-17-2015 is running
Should I Turn off my tablet. Press the “Reset” button on the back of the tablet. Press and hold the Vol + and connect the USB cable to the tablet while holding the Vol + key. Keep holding the Vol+ button and press the Power button three times and release both.
After, how do I select the correct file ?
Any help would be appreciated.
zekev said:
Hi guys, I just bought the iview i700.
I want to root it but, I'm not to sure about the step-by-step for this tablet. I've downloaded and installed the correct drivers (my windows or my linux computer can access the tablet).
I copied the "UPDATE-SuperSU-vX.Xx.zip" and the "Venue_8_WiFi_KK4.4.2v1.33_FLASHPKG" on my microSD and put it in my tablet.
Now, how to run run the IntelAndroid-FBRL-01-17-2015 ?
If i run it with my tablet turned-on (normal mode) It doesn't find my tablet.
as read on the i700 firmware update manuel :
While the IntelAndroid-FBRL-01-17-2015 is running
Should I Turn off my tablet. Press the “Reset” button on the back of the tablet. Press and hold the Vol + and connect the USB cable to the tablet while holding the Vol + key. Keep holding the Vol+ button and press the Power button three times and release both.
After, how do I select the correct file ?
Any help would be appreciated.
Click to expand...
Click to collapse
I used this method to root, under Linux.
http://forum.xda-developers.com/dell-venue/general/linux-tethered-cwm-recovery-version-t2963104
There is a Windows method for this as well.
Thanks !
I managed to root it. I was confused with this rooting. I though that we needed to install permanently a new recovery and flash a custom rom !?!? I was confusing everything that I did with my cell phone (new recovery, new rom...).
The linux method worked great.
I figured out that to put this tablet on recovery mode (visible for adb) you just have to long press (10 seconds) the power button (while the tablet is turned on). When it's off a quick press on the power button will give you a huge battery sign, filling all the tablet screen. After that adb will see the device.
need help
hey I've tried the factory reset to reset password on a tablet and yet it wont work....any advice?
Q&A for How to root RCT6773W22 (rca voyager)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for How to root RCT6773W22 (rca voyager). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Google drivers not included
First off I would like to say thank you for the video and the XDA post of how to root these new tablets. I Just bought two of them and am eager to modify them.
I followed all your steps but when I download the SDk it doesn't include any folder with Android USB drivers. WIndows automatically installs a "MTP USB Device" driver. I have tried to download the android USB driver separately else where and windows wont accept it saying it doesn't support it.
I am at a loss of how to get this to work. Kingo Root doesn't see the RCA device at all even though windows does and it is installed 100%. When I unplug the USB cable and back in Kingo searches and searches then says Not Connected.
Any help would be much appreciated
Thank You!
There is a fellow who used iroot on this in the forum. They have a apk app version PR PC version ppl say iroot is easier than kingo. Next a recovery would be great lol
Any luck on rooting RCA RCT6773W22 KitKat 4.4.2?
The last comment on another thread says "Root Master roots this tablet" without a link or anything. I installed the "Root Master" app, but was confused because this is just a "how to" app and it points basically back to the same method that the OP suggested would work.
Put simply I have my device connected to my computer and visible with "adb devices". Both standard google drivers or PDAnet works just fine. Kingo Android Root hangs at "WaitForDeviceTimeout", and basically I have figured out the device is supposed to ask for permission to wipe user data at fastboot screen, but nothing happens.
I'm attempting to get to a point of being able to try out different android mods, and I'm working on an android launcher, so I need to be able to flash a ROM to the device in the event that I program myself into a corner.
Any advice is greatly appreciated.
---------- Post added at 03:49 AM ---------- Previous post was at 03:45 AM ----------
Also, I have tried "adb reboot fastboot" and then "fastboot devices" has the tablet visible and working. Next "fastboot oem unlock" just shows "..." and nothing happens while the device is in fastboot mode. I "cntrl + C" out of fastboot, and then type adb reboot or fastboot reboot and the device comes out of fastboot mode. Still stuck in a loop of no root love.
So once this is rooted is it possible to put a custom boot animation & do exposed framework?
Happy Holidays ppl!!! :sly:
re
Hmm, this method did not work for me and I had to make my own method.
i have ported CRV recovery for this device, i need /proc partition to make scatter
Could someone pull their /proc partition using adb and upload for me please. id like to creat a scatter file forthis device. please anybody.
ive created a working recovery which iv tested on my rca voyager 7 tab, but i now need to crate a scatter file for esy flashing and restoring bricked device.
please anybody, just use adb to pull the /proc partition from the device. zip it and post a link, please and thanks. The recovery iv build is CRVv1.5 for ubifs fylesystem as its the only CRV version which has the back option. The touch does not work with our current kernel.
Are you guys using the newer quad core model?
wont see usb debugging as on
on kingo root, it says usb debugging is not on, but it is. the tab loks like the only driver is rct bla blah blah. i installed the stks but cant get the diver on the tab. and it thinks it is an unspecified device on my windows 7 computer. can someone help me?
You don't need a PC. On tablet goto browser
Type www.aptoide.com
Make sure unknown sources is checked
Install aptoide
Search kingroot install open click green button
Confirm root
FYI
There are up to 5 revisions found so far
V18
V21
V28
V31
V38
This can be found in build info in about device
Some revisions work with Kingo after ota update some don't
Some work with iroot some don't
"Kingroot"
Confirmed to work on the above revisions
Its not supersu but its root and it functions as it should
V28
N
V38
So far have proven dumchar addresses are incorrect
Thru an update for v38 which gave proper addresses
V31 has correct a dumchar
ALL 5 REVISIONS HAVE SLIGHTLY DIFFERENT ADDRESSES DIFFERENT REVISIONS ARE NOT UNIVERSAL
development has been started on v28, v31, v38
Twrp is ready for v31 and v38
Other 2 haven't even started waiting for people to post links to those revisions
sent from my RCT6773W22-V31-1.10.0-TWRP-V2.8.6.0-Compiled-by-Codelover
I have a Question tho
Which of the following do you have to download? I downloaded the one on the right which states sdk appication tools only, so wht do i do after that because im stumbled, and im done nearing the edge to finish rooting my tablet. Thank you for reading.
Download aptoide from aptoide.com
Make sure unknown sources is checked
Install aptoide and now open aptoide search for kingroot in aptoide install kingroot
Open kingroot
Click the green button
You should be rooted
Confirm with root checker
sent from my RCT6773W22-V31-1.10.0-TWRP-V2.8.6.0-Compiled-by-Codelover
synius said:
Download aptoide from aptoide.com
Make sure unknown sources is checked
Install aptoide and now open aptoide search for kingroot in aptoide install kingroot
Open kingroot
Click the green button
You should be rooted
Confirm with root checker
sent from my RCT6773W22-V31-1.10.0-TWRP-V2.8.6.0-Compiled-by-Codelover
Click to expand...
Click to collapse
Sent from my Z981 using XDA Free mobile app
Happy Holidays ppl!:fingers-crossed:
---------- Post added at 02:21 PM ---------- Previous post was at 02:15 PM ----------
So once this is rooted is it possible to put a custom boot animation & do exposed framework? http://www.radyodinletv.com/radyo-voyage-dinle/
Delete
Hi, I want to root a cubot x9. Could you recommend me the apps that I can use, for root by telephone, and from pc? I'd rather to root my phone by phone without using the pc. Thanks.
Did you have any luck figuring out how to root this phone?
You can see it in this forum:
http://www.movilesdualsim.com/tema/root-y-twrp-recovery-mds-cubot-x9-twrp-recovery-2-7-1-0.91238/
Actually, after a bit of googling I found this tutorial on getting TWRP onto any Mediatek phone, which includes links to various tools for rooting (and is also in English )
Are there any different roms out there for the Cubot X9 besides the stock?
mjstallion said:
Are there any different roms out there for the Cubot X9 besides the stock?
Click to expand...
Click to collapse
http://www.needrom.com/download/custom-rom-mod-cubot-x9-basada-en-v07/
RAMIAAY said:
http://www.needrom.com/download/custom-rom-mod-cubot-x9-basada-en-v07/
Click to expand...
Click to collapse
Note that this appears to be just a stock ROM mildly modified to work better in Spain. And on top of that, it appears to be based on an old version of the official ROM (v7 - it's up to v9 now according to the "official" thread on NeedRoms, but I have no idea what the source is for the official ones on NeedRoms, I can't find anything on the Cubot page)
And just a follow-up - I'm guessing the "official" roms on NeedRom are via the OTA updates.
WearySky said:
And just a follow-up - I'm guessing the "official" roms on NeedRom are via the OTA updates.
Click to expand...
Click to collapse
If anybody in future is looking to root the X9, feel free to inbox me. I'm going to write up a tutorial on it, but until that's ready, I can give pointers on how to go about it. For a start, none of the one-click root options work, the only way I was able to root it was to do the no-root CWM install, and then root from CWM.
Hey! This is my first post, hopefully of many to come!
Iv just bought the X9, and to want to root this bad boy.
Its got a lot of potential I think, under the covers.
It just needs the power of su
If anyone can help, that would be awesome, as I've spent
Hours goofking it, and, well, its pretty crap to say the least!
Thanks in advance
double post
I was able to successfully root when I first got the phone. After doing an OTA update, I can't get into TWRP, even after trying to root again.
Has anyone rooted after doing a OTA update?
eth0hw said:
Hi, I want to root a cubot x9. Could you recommend me the apps that I can use, for root by telephone, and from pc? I'd rather to root my phone by phone without using the pc. Thanks.
Click to expand...
Click to collapse
You can root it with Kingo ROOT.
I have tried it and it worked.
I've successfully rooted it with iRoot
Is there already a Custom Rom with English instructions available for the cubot X9?
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
alek92 said:
I've successfully rooted it with iRoot
Click to expand...
Click to collapse
iRoot is stuffed with mallware! Don't use iRoot! (I mean it)
cemslam said:
Is there already a Custom Rom with English instructions available for the cubot X9?
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
iRoot is stuffed with mallware! Don't use iRoot! (I mean it)
Click to expand...
Click to collapse
What's the worst that can happen ?
I've tried iRoot. This will automatically install the 'Secure Search' program (and more!) in your browser which is very difficult to remove. Therefore iRoot is definitely a no go for me!
I recommend "kingroot" not kingo root. I used kingo but was having trouble with lucky patcher working properly. When I used kingRoot it worked like a charm.
Here is the link for kingroot: https: //sites.google.com/site/androidxdacom/file/Kingroot_V4.5.0.902.apk?attredirects=0
Sent from my rooted cubot X9 using XDA Free mobile app
Root cubot x9-TWRP recovery
Here is a quite simple guide to root your cubot x9 and install TWRP recovery. I have tested myself and it works fine!
DISCLAIMER: I AM NOT RESPONSIBLE FOR WHAT WILL HAPPEN ON YOUR PHONE! DO IT AT YOUR OWN RISK
What you will need: A cubot x9 (Yeap I know...dont be shocked)
A PC running Windows (This method has been tested on win7 and win10)
A USB cable
Ten minutes from your life and some magic files that I will post at the end of the post.
*IMPORTANT* : Because I am a new member on the XDA community I cannot post any external websites so I cant post any files *sorry * . To find the files that I am referring too just google needrom . com and login in in this website search for cubot x9 and you will find all these files over there *OR* you can just send me a PM and I will reply with the links of the files.
(1):First of all before we start rooting we need to make sure that we have the correct drivers on our Window PC. Simple open the Control Panel go to Device Manager. Then turn off your phone and plug it in your computer. If you see for a moment a device with the name "PreLoader USB VCOM Port" the you have the correct drivers (clap*clap). If anything else appears you need to download the correct drivers. Just download the "All MTK USB Driver 2014.rar" file and unzip it. The re-plug your phone(turned off!) to your PC and when the device shows it self quickly right-click on it and choose update drivers. Then choose update through your computer and choose the folder you just unziped and press OK. Wait a while and *boom* you have your drivers. Before you continue check again if the drivers are correct ( if the "PreLoader USB VCOM Port" shows on Device manager). If not repeat this step.
Now lets root our phone like there is no tomorrow !
(2): Download and unzip the "SP Flash Tool 5.1343.01.rar" and "RECOVERY CUBOT X9 (MDS TWRP Recovery 2.7.1.0.). Rar". Then download the "UPDATE-SuperSU-v2.40.zip" file. Turn on your phone and copy paste the "UPDATE-SuperSU-v2.40.zip" file on your phone sorage(as a zip!). After that unplug your phone and turn it off. Go to the SP FLASH TOOL folder you unziped and run the flash_tool application. You press OK on the first window that pops up and then you choose on your right Scatter-loading. Browse your PC and choose the "MT6592_Android_scatter CUBOT X9.txt" which is inside the recovery folder that you unziped on the beginning of this step. Press ok. Then on your left you go to options->option->download and make sure to tick the box which says DA DL All with Checksum. Close that window and find and choose "Download only" and then click download(see the image on the end). After that the application is ready and it looks for our phone.
And now here is the tricky part. Right now our program is ready and searching for our phone. If we have the correct drivers and connect our turned off cubot the program will install the TWRP recovery in a few seconds. If everything went good a green circle will popup. After we see the green circle we have to go fast and press simultaneous the volume+ and power button on our phone till we see the CUBOT sigh. If we were a little too late the recovery will be lost and the phone will boot normally on stock. If this happens repeat the step (2) again.
(3): (Do you feel it? Root is near!) If everything went as planned right now you are on the TWRP recovery. Simply press install and find the UPDATE-SuperSU-v2.40.zip you saved on your phone storage before. You choose it and the you "swipe to install". After the installation finishes reboot your phone. After some magic your phone is now rooted!!!
After the reboot if you ever want to run on the recovery simple turn off your phone plug it on the power and press volume+ and power simultaneous.
Please hit thanks button
for root i have used Kingo ROOT
https://www.youtube.com/watch?v=kVxwCXx-sQY
So I recently unrooted my zenfone c, and my phone was behaving wierd (wifi connected but no internet, default file browser of phone shows nothing inside: absolute blank, connects to PC but doesn't show in my computer, tells camera does not exist...) and so I decided to flash the stock rom again, I downloaded the stock rom from asus, and the flash tool from the net. Now when I follow the instructions say ..............here->............(asus.com/zentalk/forum.php?mod=viewthread&tid=14894&extra=page%3D1%26filter%3Dtypeid%26typeid%3D231), the following error comes up in the flash tool while pressing the start button
!- I did not use the rom specified in the above linked page, but downloaded seperately from asus website. what may be the problem... I am new so can't post screen shots from links, so here is just the link ...........plus.google.com/photos/107799030761055081656/albums/6209484049893645089/6209484057280146242?pid=6209484057280146242&oid=107799030761055081656............
I was also thinking about using sideload from ADB, but given the error, I think the file(stock rom) has some problem... and the other one is that I don't know where my ADB exists, amidst about a 2Million folders, I am on vista, so you can think how does the search work, if any one can help me regarding this that would be great. I don't know much about android studio yet, and I uninstalled eclipse IDE from my PC, that is why I am having problem finding ADB folder.
Also I am new here (at XDA) so please forgive my first time errors like wrong forums and such
Thank You To everyone in advance
EDIT; I was doing some search and research on my side, and found out that the ROM I had downloaded from the ASUS update server was incompatible(I don't know why perhaps some safety measure), so I went with the ROM provided by the person whose post from zentalk is referred to in the above link. And that worked out quiet fine except for downloading as my internet connection is too slow. The only thing that changed is all and everything was wiped out from my device, but thankfully I had a backup. Also the ROM that worked was the initial release and I had to update the phone using OTA.
I'll keep this thread open so that maybe someone might find it helpful and perhaps someone may state the true reason behind the error.
I lay out today for Asus firmware under this program
---------- Post added at 12:28 PM ---------- Previous post was at 12:18 PM ----------
firmware in the format RAW
WW_A600CG_1.14.40.50
WW_A600CG_1.17.40.16
WW_A600CG_2.22.40.46
WW_A600CG_3.23.40.60
CN_A600CG_1.17.40.19
CN_A600CG_1.18.40.12
TW_A600CG_1.17.40.16
WW-ZC451CG-4.11.40.124-Rel-User-20150703-181118
WW_A500CG_2.22.40.54_20150527_44
WW_A500CG_3.23.40.60_20150630
Please help me
igorek1438 said:
I lay out today for Asus firmware under this program
---------- Post added at 12:28 PM ---------- Previous post was at 12:18 PM ----------
firmware in the format RAW
Click to expand...
Click to collapse
I've got the same problem but I can't download the ROM file. My internet speed is very slow and it speed estimates 8 hours for downloading but ends up abruptly due to some network error. Hence i'm unable to download big files.
Can you give a torrent link for WW-ZC451CG-4.11.40.124-Rel-User-20150703-181118.raw file???
Thanks,
Vaibhav
firmware in the format RAW
WW_A600CG_3.24.40.87
I want asus zenfone 5 A501CG RAW file
when i try with my asus zenfone 5 i got flash image failure error#3
any help
Unzip image failure !! same here . Need Help,
site not opening
these files are not getting download na how