Help!
My phone hard brick and can't boot, recovery, bootloader, or anything after format all with bootloader using SP Flashtool.
I've flash it with global fastboot rom latest, and got error BROM ERROR : STATUS_DA_EXCEED_MAX_NUM (0xC0070005).
Pls help me
Tedy Ramdani said:
Help!
My phone hard brick and can't boot, recovery, bootloader, or anything after format all with bootloader using SP Flashtool.
I've flash it with global fastboot rom latest, and got error BROM ERROR : STATUS_DA_EXCEED_MAX_NUM (0xC0070005).
Pls help me
Click to expand...
Click to collapse
Refer to this: http://en.miui.com/thread-494491-1-1.html
Someone commented a solution by -kortez-
Hopefully, it will work for you
Related
Hello XDA people, i just flashed the latest XZDualRecovery on my Xperia Z2 (existenz marshmallow 1.0.0) haven't updated it yet but that was what i wanted to do so i just flashed this recovery and didnt read that it is just for lollipop only so i guess i ****ed up my device and dont know a way to fix this because its just restarting over and over again its even no bootloop its just showing the SONY logo at the beginning so im asking you people if you can help me to get this problem solved, thank you in advance
and sorry for my bad english...
Pocahontas32 said:
Hello XDA people, i just flashed the latest XZDualRecovery on my Xperia Z2 (existenz marshmallow 1.0.0) haven't updated it yet but that was what i wanted to do so i just flashed this recovery and didnt read that it is just for lollipop only so i guess i ****ed up my device and dont know a way to fix this because its just restarting over and over again its even no bootloop its just showing the SONY logo at the beginning so im asking you people if you can help me to get this problem solved, thank you in advance
and sorry for my bad english...
Click to expand...
Click to collapse
Well. There are few simple ways.
First is can you enter the recovery?
If not, then just use the command "fastboot flash boot boot.img". As boot.img select some kernel with custom recovery (doesn't matter if lollipop, kitkat etc.). After that just flash some rom and optionally a proper kernel for it.
However if your bootloader is locked you may just flash an ftf with flashtool.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
Well. There are few simple ways.
First is can you enter the recovery?
If not, then just use the command "fastboot flash boot boot.img". As boot.img select some kernel with custom recovery (doesn't matter if lollipop, kitkat etc.). After that just flash some rom and optionally a proper kernel for it.
However if your bootloader is locked you may just flash an ftf with flashtool.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
well my device is in fastboot and i tried to flash cwm over fastboot and it just tells me "waiting for any device" but the LED is blue so i dont know why it just doesnt flash it
Pocahontas32 said:
well my device is in fastboot and i tried to flash cwm over fastboot and it just tells me "waiting for any device" but the LED is blue so i dont know why it just doesnt flash it
Click to expand...
Click to collapse
If you don't have unlocked bootloader, then fastboot is useless for you.
As they guide users over your post in a locked bootloader just flash stock firmware for your model device with Flashtool.
Pocahontas32 said:
well my device is in fastboot and i tried to flash cwm over fastboot and it just tells me "waiting for any device" but the LED is blue so i dont know why it just doesnt flash it
Click to expand...
Click to collapse
Then there's probably something wrong with your adb drivers.
Hey Guys
I recently flashed the dev rom from here http://en.miui.com/download-301.html
Now I want to go back to the global stable rom which is also on the same site.. I tried downloading it and flashing it through the updater app but it says "Couldn't verify package". I tried using the MiFlash guide from here http://en.miui.com/forum.php?mod=viewthread&tid=235865 but it gives an error saying "Cast is not valid".. How do I go back to global stable?
Thanks in advance
If you have unlocked bootloader than you can download the fastboot rom and flash in custom recovery.
else flashing the fastboot rom with miflash tool is the only way.
sonudhillon said:
If you have unlocked bootloader than you can download the fastboot rom and flash in custom recovery.
else flashing the fastboot rom with miflash tool is the only way.
Click to expand...
Click to collapse
Thanks for your reply
How do I resolve this invalid cast error?
sonudhillon said:
If you have unlocked bootloader than you can download the fastboot rom and flash in custom recovery.
else flashing the fastboot rom with miflash tool is the only way.
Click to expand...
Click to collapse
If i understand you ... if my bootloader is locked i can update with fastboot rom the new Miui 8 from the beta version (6.8.18) . No need to unlock ????
Yes, but only with Mi flash tool.
Hi guys, I'm new here and I'm looking for a solution for this device, xiaomi redmi go, which is bricked and has bootloader blocked, so I can not flash the stock rom By fastboot mode in xiaomi flash Tool, so I tried edl mode, and also couldn't flash any rom I downloaded, and the device is only recognized by older versions of xiaomi flash Tool In edl mode. I could not access the miui forum to download the rom because it is apparently down Then I downloaded it from other sites. Thanks in advance to anyone who wants to help me.
P.s: all versions of the roms i found on the internet are before or after the version on the device, So I want this version that is on the device:
tiare/8.1.0/OPM1.171019.026/V10.2.5.0.OCLMIXM
Jorge Luiz_ said:
Hi guys, I'm new here and I'm looking for a solution for this device, xiaomi redmi go, which is bricked and has bootloader blocked, so I can not flash the stock rom By fastboot mode in xiaomi flash Tool, so I tried edl mode, and also couldn't flash any rom I downloaded, and the device is only recognized by older versions of xiaomi flash Tool In edl mode. I could not access the miui forum to download the rom because it is apparently down Then I downloaded it from other sites. Thanks in advance to anyone who wants to help me.
P.s: all versions of the roms i found on the internet are before or after the version on the device, So I want this version that is on the device:
tiare/8.1.0/OPM1.171019.026/V10.2.5.0.OCLMIXM
Click to expand...
Click to collapse
hey
do you still have the problem?
you need to unlock the bootloader using fastboot
the command in fastboot is
Code:
fastboot oem unlock-go
then you can flash with the flash tool
yairku said:
hey
do you still have the problem?
you need to unlock the bootloader using fastboot
the command in fastboot is
Code:
fastboot oem unlock-go
then you can flash with the flash tool
Click to expand...
Click to collapse
it says remote unlocking is not allowed
hiren29 said:
it says remote unlocking is not allowed
Click to expand...
Click to collapse
hi, you might need to enable oem unlocking from inside the ROM first
yairku said:
hi, you might need to enable oem unlocking from inside the ROM first
Click to expand...
Click to collapse
my device is bricked..i cant boot ..
so pls help me to flash fastboot rom
hiren29 said:
my device is bricked..i cant boot ..
so pls help me to flash fastboot rom
Click to expand...
Click to collapse
im sorry, i dont know what to do my friend. i hope that you find a solution
Bro you found any solution of Redmi Go writing problem. Same issue am having and stumbled upon this thread.!
Anyone there? Can i factory reset my Redmi go or bypass OEM unloc because my phone is stuck at boottlogo? The problem occured when i tried to remove root access through fastboot then i accidentally locked the unlocked bootloader. And now I cannot turn on my phone nor i can flash stock rom. Mi flash tool message after attempt- "Critical partiton flashing is not allowed".
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.
I hard bricked my Redmi note 10 and now I can't boot into fastboot mode. The only solution is QFIL but it keeps giving me errors. From where can I find a proper fastboot ROM (including mbn file) which could be flashed by QFIL? The normal fastboot ROM results in QFIL giving different errors.
munimjaffer said:
I hard bricked my Redmi note 10 and now I can't boot into fastboot mode. The only solution is QFIL but it keeps giving me errors. From where can I find a proper fastboot ROM (including mbn file) which could be flashed by QFIL? The normal fastboot ROM results in QFIL giving different errors.
Click to expand...
Click to collapse
how did you hard brick your device
munimjaffer said:
I hard bricked my Redmi note 10 and now I can't boot into fastboot mode. The only solution is QFIL but it keeps giving me errors. From where can I find a proper fastboot ROM (including mbn file) which could be flashed by QFIL? The normal fastboot ROM results in QFIL giving different errors.
Click to expand...
Click to collapse
Don't always look for other methods and do the right thing. You don't need to start multiple threads for one of your problems.
Redmi Note 10 bricked
My phone is completely messed up right now. All I did was flash spark os (A12) over PPUI (A11) and then my phone didn't boot. I flashed that ROM via fastboot flash tool. I think it was the tool which caused this problem. After so many tries, my...
forum.xda-developers.com
can boot recovery? .. use twrp..reboot to fastboot..