Phone Suddenly Turned Off - Xiaomi Redmi Note 4 Questions & Answers

I Have Xiaomi Redmi Note 4X (Qualcomm) 32GB/3GB RAM
While i play, suddenly my phone hang
while i charge, the LED is Blinking RED continuously
i can't turn on, enter fastboot/recovery at all
LIKE A DEAD PHONE with LED Blinking RED continuously
in the computer, it detect as Qualcomm HS - USB QDLOADER 9008 (COM3)
then i search, it's becouse the system
so i flash a Stock MIUI ROM (From LineageOS 15 from [email protected]) from MIFlash BETA
then the process start
starting from Ping Target Via Firehose for about 156 Second and then error with green in the background
Sorry for some language, i from Indonesia

RazerTechJK24 said:
I Have Xiaomi Redmi Note 4X (Qualcomm) 32GB/3GB RAM
While i play, suddenly my phone hang
while i charge, the LED is Blinking RED continuously
i can't turn on, enter fastboot/recovery at all
LIKE A DEAD PHONE with LED Blinking RED continuously
in the computer, it detect as Qualcomm HS - USB QDLOADER 9008 (COM3)
then i search, it's becouse the system
so i flash a Stock MIUI ROM (From LineageOS 15 from [email protected]) from MIFlash BETA
then the process start
starting from Ping Target Via Firehose for about 156 Second and then error with green in the background
Sorry for some language, i from Indonesia
Click to expand...
Click to collapse
How about you try using mi flash..flash official eom..

RazerTechJK24 said:
I Have Xiaomi Redmi Note 4X (Qualcomm) 32GB/3GB RAM
While i play, suddenly my phone hang
while i charge, the LED is Blinking RED continuously
i can't turn on, enter fastboot/recovery at all
LIKE A DEAD PHONE with LED Blinking RED continuously
in the computer, it detect as Qualcomm HS - USB QDLOADER 9008 (COM3)
then i search, it's becouse the system
so i flash a Stock MIUI ROM (From LineageOS 15 from [email protected]) from MIFlash BETA
then the process start
starting from Ping Target Via Firehose for about 156 Second and then error with green in the background
Sorry for some language, i from Indonesia
Click to expand...
Click to collapse
It's hard bricked.. Same happened with me... Use a deep flash cable or try short circuit method to boot into Edl mode and flash fastboot ROM.
(Google the terms you'll get to know better)

ramsaicharan said:
It's hard bricked.. Same happened with me... Use a deep flash cable or try short circuit method to boot into Edl mode and flash fastboot ROM.
(Google the terms you'll get to know better)
Click to expand...
Click to collapse
Me Reply With My Second Account
How did you enter the EDL Mode?
What Kind of Fasboot ROM?
I see in the internet that say flash when detected with Qualcomm HS-USB QDLOADER 9008 ,(COM *)
But in the computer detect that, then the flash Error in Random Code Sometimes after Ping Firehose Error with code Write Timed Out, Ping Hello Packet then Error Receiving Hello Packet... (COM *), Cant write protected......, Device Resource is in use.
The Detected QDLOADER is a real EDL MODE?
---------- Post added at 01:24 PM ---------- Previous post was at 01:20 PM ----------
RazerTechJK2004 said:
Me Reply With My Second Account
How did you enter the EDL Mode?
What Kind of Fasboot ROM?
I see in the internet that say flash when detected with Qualcomm HS-USB QDLOADER 9008 ,(COM *)
But in the computer detect that, then the flash Error in Random Code Sometimes after Ping Firehose Error with code Write Timed Out, Ping Hello Packet then Error Receiving Hello Packet... (COM *), Cant write protected......, Device Resource is in use.
The Detected QDLOADER is a real EDL MODE?
Click to expand...
Click to collapse
The Error with code Error Receiving Hello Packet is can not read from port (COM *), Sorry For mistake error code

RazerTechJK2004 said:
Me Reply With My Second Account
How did you enter the EDL Mode?
What Kind of Fasboot ROM?
I see in the internet that say flash when detected with Qualcomm HS-USB QDLOADER 9008 ,(COM *)
But in the computer detect that, then the flash Error in Random Code Sometimes after Ping Firehose Error with code Write Timed Out, Ping Hello Packet then Error Receiving Hello Packet... (COM *), Cant write protected......, Device Resource is in use.
The Detected QDLOADER is a real EDL MODE?
---------- Post added at 01:24 PM ---------- Previous post was at 01:20 PM ----------
The Error with code Error Receiving Hello Packet is can not read from port (COM *), Sorry For mistake error code
Click to expand...
Click to collapse
You should use a deep flash cable to boot into Edl mode (you can search on the net for how to make a deep flash cable.. Or you can order one online)...
And there's one more method in which you have to remove the back panel of your device and unplug the battery and short circuit it by connecting the positive and negative terminals on the motherboard.(i have seen on YouTube but didn't try because we have service centres here, they repaired me free of cost)
Try using deep flash cable method.... It's easier and less risk prone....

ramsaicharan said:
You should use a deep flash cable to boot into Edl mode (you can search on the net for how to make a deep flash cable.. Or you can order one online)...
And there's one more method in which you have to remove the back panel of your device and unplug the battery and short circuit it by connecting the positive and negative terminals on the motherboard.(i have seen on YouTube but didn't try because we have service centres here, they repaired me free of cost)
Try using deep flash cable method.... It's easier and less risk prone....
Click to expand...
Click to collapse
I Use The Short Circuit and connected again. with same Status as Qualcomm HS-USB QDLOADER 9008 (COM *)
Then I Retry And Receive This (ScreenShoot) https://ibb.co/dcHOO6

RazerTechJK24 said:
I Use The Short Circuit and connected again. with same Status as Qualcomm HS-USB QDLOADER 9008 (COM *)
Then I Retry And Receive This (ScreenShoot) https://ibb.co/dcHOO6
Click to expand...
Click to collapse
Once try flash all option....(you'll lose the data)

ramsaicharan said:
Once try flash all option....(you'll lose the data)
Click to expand...
Click to collapse
Same, No Effect. Still Send nop Command in Stats Device Is Busy
SS https://ibb.co/mhZ9wR the COM 3 is bugging, the real one is COM 4

RazerTechJK24 said:
Same, No Effect. Still Send nop Command in Stats Device Is Busy
SS https://ibb.co/mhZ9wR the COM 3 is bugging, the real one is COM 4
Click to expand...
Click to collapse
Wait did you disconnect the battery?

ramsaicharan said:
Wait did you disconnect the battery?
Click to expand...
Click to collapse
Yes

RazerTechJK24 said:
Yes
Click to expand...
Click to collapse
Wait did you reboot to Edl mode?

ramsaicharan said:
Wait did you reboot to Edl mode?
Click to expand...
Click to collapse
Using The Short Circuit

RazerTechJK24 said:
Using The Short Circuit
Click to expand...
Click to collapse
Yes, after short circuiting, did you use adb commands and reboot to Edl mode

brother did u find any solution...am facing this same error and same issue plz help me at 9206440406

Same issue used shortcircuit method flashing ping via firehouse showing write timeout

Related

[Q] [Help] Lenovo K910 DualSim no download mode (brick)

Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910

miflash not detecting redmi 3 phone

hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Have you unlocked your bootloader yet?
Sent from my Redmi 3 using Tapatalk
GrimEire said:
hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Click to expand...
Click to collapse
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
I just let windows find the driver and they do.it automatically if u have internet connection ok.why work hard when it can be simple
It has never worked for me, but if it works for you, no problem
Sent from my Redmi 3 using Tapatalk
haha maybe i am lucky
my computer for some reason just detected the phone the first time i connected to it a few days later.
im having bigger issues now as the flashing took forever after about 12 hours it was still flashing so i unplugged it.
now my phone is bricked i think.
when trying to turn on the phone it is stuck at the mi mi.com logo
it stays there for a few minutes and then vibrates and goes black and starts again.
i can get into fastboot (volume down and power) but cant get into anything else.
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-t...with-drivers-on-windows-quickest-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Redmi note4
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Hello,
My Redmi Note 4 got Bootlooped,No Recovery No Rom and no way for Charging while pressing and hold the power button,there appeared one second blink of MI Logo.i tried all the ways to flash thro' fast boot mode.but remote partition flashing is no allowed.while tried to flash in edl mode,mi flash didn't detect the Driver.On Seeing device manager the it shows Qualcomm HS-USB Diagnostics 900E and not as Qualcomm HS-USB qdloader 9008.while upading driver it shows the best driver already installed.In my opnion due to Qualcomm HS-USB Diagnostics 900E ,mi flash didn't detect the driver.how can i switched up to Qualcomm HS-USB qdloader 9008.
device not showing in miflash tool in edl mode..
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
in edl mode device not showing in miflash tool ...
ManishOutlook said:
in edl mode device not showing in miflash tool ...
Click to expand...
Click to collapse
Make sure you have all tye drivers of ur device installed on ur pc and also latest miflash tool and try again
You can try a different usb cable
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
gottlobzufall said:
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
Click to expand...
Click to collapse
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Max.Payne said:
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Click to expand...
Click to collapse
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
rekh said:
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
Click to expand...
Click to collapse
Deepflash cabe not needed, i used tespoint to forse in qualcomm hsxxx mode, device is present in device manager but flasher can't see him. I solved phone on the same way on another computer. First is win7-64, second is win10-64, same program, drivers, flash file... I don't know why... but problem is solved...
How long should it take? Mine is taking very long. And will there be sounds playing of device disconnected and connected again?

Remdi Note 3 (kenzo) completely dead

Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Try going to Fastboot Mode using Power Button and Vol Down. If you can go to Fastboot, then I'm pretty sure you'll be able to go to EDL Mode. Just look up online how to go to EDL Mode from Fastboot. I think the command to be typed in the cmd window is 'fastboot reboot edl'.
If that works, and you have your Qualcomm drivers installed, you should be able to flash a Fastboot ROM using Mi Flash Tools.
Cheers!
[email protected] said:
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Click to expand...
Click to collapse
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
manakmishra said:
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
Click to expand...
Click to collapse
Open kenzo a.k.a. redmi note 3 disconnect battery
Then connect USB just to mobile not to PC
Then connect battery don't press any button
Connect USB to PC while pressing volume up button
Start mi flash tool click on refresh button see if it detects.
Start flash
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Simply do this : https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Then flash latest global dev rom in Miflash (refresh when phone isn't detected http://en.miui.com/a-234.html
since you can't boot, it might be worth your time to take a look at this.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
It's a tutorial to make a 'deep-flash' cable using a micro usb cable that will force your device into fastboot mode, much like samsung's USB jig.
If that works, then you can try following this tutorial :
http://en.miui.com/thread-235865-1-1.html
You can use the link given in post #6 to boot to edl, then flash a stock MIUI ROM using MiFlash.
If all else fails, it might be time to consider taking it to the Mi service centre.

Bricked Xiaomi Redmi Note 4 (please help)

My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL

[NEED HELP] Bricked my LeEco Cool1 (C106)

Hello, I will describe my problem as follows
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switches off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start blinking and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
*Let's all be nice. If you won't write for me, show me the right places, and i'll thank you. And please thank me too if I've helped you.
realblackyz said:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode .
Read post for more :
https://www.pantomath.xyz/how-to-re...soft-bricked-coolpad-cool-1-c103-c106-device/
Good Luck
Teddy Lo said:
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode.
Read post for more :
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good Luck
Click to expand...
Click to collapse
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
realblackyz said:
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
Click to expand...
Click to collapse
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
https://www.youtube.com/watch?v=ibu6roR1j2I
Good luck
Teddy Lo said:
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good luck
Click to expand...
Click to collapse
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
realblackyz said:
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
Click to expand...
Click to collapse
Did it work with the EDL cable?
ulloa666 said:
Did it work with the EDL cable?
Click to expand...
Click to collapse
nope it's not working now i have a bricked phone + wasted 10$
i think i should really consider opening the phone for the test point method

Categories

Resources