Hi,
I had the watch paired with my android phone and was using Amazfit Watch app to sync.
I have accidentally removed the saved Pace entry in bluetooth settings of my android phone. Now in the phone, i am unable to see the watch in the bluetooth devices list and hence unable to connect.
I tried rescanning the QR code entry shown in the phone but nothing worked.
Is there anything that i can try to make the watch bluetooth visible to near by devices?
Thanks,
Yuvaraj
Solved:
---------
I had to factory reset my phone and install the latest firmware.
I immediately got the pairing request in my phone and was able to pair with watch.
Thanks,
Yuvaraj
Related
My phone used to be paired with my G watch, but after some problems, I decided to factory reset my watch and pair anew. till then it does not happen. at 1st my phone recognizes the watch and the code appears and I push the "pair" button, and it says "paired!", after that on my watch appears "updating" and then "syncing" but it takes a long time. For the android wear, the "updating" is on the screen the whole time, and when finished, nothing has happened and the watch isn't paired. I updated my andoird wear, cleaned its casch but no success. I've tried several times. My phone is htc e9 with lolipop, so is my G watch, with lolipop.
what should I do? some guy told me to update my watch, but it is not possibble as no network with unpaired phone. I also tried connecting the watch to pc and update it from there, bụt pc doesnt recognize the watch. help me please.
Try to reinstall the Android Wear app and sync the watch, it could probably fix the problem.
So I bought a Ticwatch 2 the other day
It stopped receiving notifications this morning, and so I decided to try resetting it and starting fresh.
I reset the watch, so it needs to be set up again, but it is still showing on my Bluetooth list. If i hit unpair on bluetooth, it just automatically pairs with the watch again. So I am now stuck in a loop of not being able to set up as the watch isn't reflecting it is connected to the phone, the app on the phone shows it isnt paired, but Android says it is connected and I can not possibly disconnect it.
I have tried clearing bluetooth cache and restarting the phone, and it always just connects right away.
Is there a way to force the phone to stop recognizing a bluetooth device?
Reset network settings ... gonna erase all BT/Wifi etc ....
I would say that or just rename it and then try to unpair the watch if it keeps trying to connect
Hello there just bought an Amazfit 2 Stratos went home to pair it with my S8 Galaxy and i scanned the QR code everything was fine my phone recognized it but the watch showed me the QR again i tried 3-4 times again nothing. I went to my iPhone and paired it perfectly also updated the firmware then tried to unpair it from iPhone and test it on S8 again and still nothing happened . It scans the QR code my phone recognize the watch but on the watch screen i still see the QR screen instead of choosing left or right hand.
Thanks in advance.
Hello. Check is the watch is in the phone's BT settings, if it is there then remove and try to pair again. If it's not, try pairing with WiFi off on phone.
lfom said:
Hello. Check is the watch is in the phone's BT settings, if it is there then remove and try to pair again. If it's not, try pairing with WiFi off on phone.
Click to expand...
Click to collapse
Tried both nothing changed.
mixmasterr said:
Tried both nothing changed.
Click to expand...
Click to collapse
Are you using a custom ROM, Oreo-based? Oreo may block some permissions making pairing difficult.
lfom said:
Are you using a custom ROM, Oreo-based? Oreo may block some permissions making pairing difficult.
Click to expand...
Click to collapse
No im using a default one should i install a custom one if yes could you suggest me the best for S8 !
Thanks!
Sorry, I don't know any custom ROM for S8. But if the current one you have isn't 8.0+, then shouldn't be any problem pairing. My last 2 suggestions:
- Look for a Chinese version of Amazfit Watch app (current one is 2.4.0-CN, I think the one in APKMirror is the CN version), if your watch is the model A1609 it may pair only with CN Amazfit app;
- Try pairing with another phone with Android 7.1 or older, if it still doesn't pair then maybe there is a problem with the watch.
mixmasterr said:
Hello there just bought an Amazfit 2 Stratos went home to pair it with my S8 Galaxy and i scanned the QR code everything was fine my phone recognized it but the watch showed me the QR again i tried 3-4 times again nothing. I went to my iPhone and paired it perfectly also updated the firmware then tried to unpair it from iPhone and test it on S8 again and still nothing happened . It scans the QR code my phone recognize the watch but on the watch screen i still see the QR screen instead of choosing left or right hand.
Thanks in advance.
Click to expand...
Click to collapse
I received today my amazfit stratos (1619) and I've got exact the same problem (Samsung S8 with android 8.0.0). I think that we need to wait for the new official update which will support S8...
Just pair watch on any other phone (android 7 and below) and then log in to Amazfit App with the same account, watch should be paired. Worked for me.
Yes, this worked for some people that could not pair using Oreo:
This should work: pair the watch using your account and the other phone, then put watch in airplane mode (so it will disconnect from phone) and uninstall Amazfit app and remove watch from phone's Bluetooth settings (watch won't be unpaired, so no factory reset). Then go to your phone, make sure the watch isn't listed in Bluetooth settings, install the same app version used before, turn off airplane mode on watch and login to your account. The watch and phone should show the usual pair request with a pin code, confirm in both and they should be paired. If it doesn't happen then your phone's Bluetooth cannot see the watch for some reason... I have done this thousands times and it always worked if the phone can find the watch.
Click to expand...
Click to collapse
Recently my Amazfit BIP automatically updated and it stoped being able to connect via bluetooth.
So I tried to reset to factory settings and now the Amazfit is frozen an its screen only shows the icon of connecting the watch to the smartphone, and it's not possible to stop this process.
I've tried to use different apps to connect and although they can find the watch, they are unable to connect.
Have anyone faced a similar situation?
Wait till it drains out en then start it up again. U should see the pair to device icon
Hi there
I am struggling to pair the Amazfit Pace with my iphone. I scan the QR Code and get an Error Message that says I need to unpair the device from bluetooth. The problem is, it's not in the bluetooth list for me to unpair it. I tried other devices including an iPhone 5... same error issue. I reset my iPhone, I removed Amazfit App from the storage of my iPhone.
What is this error? What do I need to do? Is this an Amazfit App issue?
I cannot get past the QR Code screen to see or do anything more than drive myself crazy going to the bluetooth setting to remove the device, knowing full well, it's not in the list.
any help? Or is this a junk smart watch?
The watch is new? If yes, probably you must first update the firmware using and Android phone with Android 7.1 or older, or use a Huami tool to install at lest firmware 1.3.8. If it's not brand new, probably it was paired with another account, then you must first unpair it properly from that account...
Edit: if you haven't done it yet, restarting the watch a couple of times may help too.