I Have big problem
I Have sony xperia xa ultra dual F3212 aith nougat and unlocked bootloader. I have tried to root it acc to instruction from : https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3638727 .
In the end I should go into recovery to root but I just can not doit. ,-'10. Unplug the phone, hold "Vol-" and "Power" buttons. Release all buttons after phone vibrate' . all I get flashing screen with "sony" and when I release buttons it reboots mormally . I am desperate for Halp, advice anything is better then nothing , please
reg
It's same happen to me many times I've tried Hahaha My Device Is Sony XA Ultra F3212.... Someone Can Advice to fix this?
william.alovera said:
It's same happen to me many times I've tried Hahaha My Device Is Sony XA Ultra F3212.... Someone Can Advice to fix this?
Click to expand...
Click to collapse
You must follow the Instructions carefully mate.
1. Preparing 2 firmware stated by @rrvuhpg and take note the bootdelivery.xml to enable access to twrp
2. At fastboot mode upon flashing,your phone's screen will show a written success-ish
3. Volume - plus power button and after sony splash logo and a vibrate ,you may release the buttons if not, you're missing something in the Instructions
4. All credits are to @rrvuhpg
Related
Hey guys!
I'm not allowed to post this into the development section for the xperia p, so I have to do it here.
I've decided to root my xperia p. So, I unlocked the bootloader and rooted my device following these instructions using flashtool method: http://forum.xda-developers.com/showthread.php?t=1900172. Right after that, I flashed over this kernel: http://forum.xda-developers.com/showthread.php?t=1894463.
I was pretty happy with this setup until I realised, that this kernel still has some bugs that need fixing and is not ready for stable everyday-use. (In my opinion..)
What I did next was flashing back to the stock kernel, which can be found in the same thread in the first post (for people who want stock kernel with custom CWM) and now my p is in a constant bootloop, turning on and off, without showing any logo and not giving me any access to recovery. I can't even initiate fastboot.. WHAT DO I DO NOW? I really need your help with this..
AND by the way, I have a lot of experience in the matter of flashing and android development, but this is the first time I really don't know what to do to fix this issue!
ace.infinity said:
Hey guys!
I'm not allowed to post this into the development section for the xperia p, so I have to do it here.
I've decided to root my xperia p. So, I unlocked the bootloader and rooted my device following these instructions using flashtool method: http://forum.xda-developers.com/showthread.php?t=1900172. Right after that, I flashed over this kernel: http://forum.xda-developers.com/showthread.php?t=1894463.
I was pretty happy with this setup until I realised, that this kernel still has some bugs that need fixing and is not ready for stable everyday-use. (In my opinion..)
What I did next was flashing back to the stock kernel, which can be found in the same thread in the first post (for people who want stock kernel with custom CWM) and now my p is in a constant bootloop, turning on and off, without showing any logo and not giving me any access to recovery. I can't even initiate fastboot.. WHAT DO I DO NOW? I really need your help with this..
AND by the way, I have a lot of experience in the matter of flashing and android development, but this is the first time I really don't know what to do to fix this issue!
Click to expand...
Click to collapse
dont panic if you have boot loop all you need to do is hard reset the phone this is dont by holding power button and vol+ till it vibrates 3 times this will switch the phone off and allow you fastboot to flash cwm recovery again and then you can recover your backup
Xperia P.... has a removable battery right, if I recall.
Remove battery, hold vol up, place battery. Phone should vibrate 3 times.
Keep finger on vol up, shove USB port in. You should get into fastboot.
If you're aiming to go back to stock, then just go into flashboot (vol down), and flash a stock ftf file.
Snowstormzzz said:
Xperia P.... has a removable battery right, if I recall.
Remove battery, hold vol up, place battery. Phone should vibrate 3 times.
Keep finger on vol up, shove USB port in. You should get into fastboot.
If you're aiming to go back to stock, then just go into flashboot (vol down), and flash a stock ftf file.
Click to expand...
Click to collapse
sorry i thort it was hard battery ( my apologies) once you have it in flash mode you can do stock ftf and cwm as you did before
Xperia P doesn't have a removable battery, the innards of the phones are about as accessible as the iphone
MadManMark said:
Xperia P doesn't have a removable battery, the innards of the phones are about as accessible as the iphone
Click to expand...
Click to collapse
Didnt think it did but I don't have one . To the open just follow my first post
Sent from my Xperia Go using xda premium
My bad my bad. Google images got me confused over the U.
have you tried hard reboot ?
keeping d power+ volume up +volume down button pressed until the fone vibrates thrice ?
if this happens that means ur phone can enter into fastboot by connecting the usb while holding the vol up button
and u can flash this kernel
http://forum.xda-developers.com/showthread.php?t=1841613
works pretty good with stock ics firmware
have tried it myself
njoi
and all the best
Hello,
I have recently made a horrible mistake, I flashed the incorrect ROM on my Xperia Z3v leaving the phone bricked. I am asking for your help. I have tried using the Flashtool but I am not certain if it's the phone or I that is causing a mistake. The steps thus far that I have followed.
Downloaded: Flashtool & Drivers
Installed: Drivers for Xperia Z3v
Downloaded: Firmware from XperiFirm
Now, the issue next is nothing shows up in my firmware when I attempt to flash. I have checked the source folder the .ftf files are there.
Furthermore:
When I hold VOL UP and plug in the USB>Blue led is indicated
When I hold VOL DOWN and plug in USB>Red flashes with a second of green whilst vibrating
Found this video on youtube: https://www.youtube.com/watch?v=dtaUxuorVSA
Exactly like this, checked for a solution seems like he repaired it via sony. Unfortunately for me I don't have that luxury.
**Update**
I installed the lastest release of flashtool (0.9.22.2) but it occurred to me to revert back to the previous release (0.9.18.6)
Now I can finally see the firmware but I am still having issues actually flashing the file. I get errors such as:
ERROR - root : this bundle is not valid
ERROR - Cannot delete C:\Users\Juan\.flashTool\firmwares\prepared\userdata.sin
**More Information**
I should include I am on a locked bootloader
same
that seem the same with my situation
Okay the green light is flash mode / upgrade mode. The blue light is fast boot. You want it on with the green light on to flash it once it's bricked. You can't flash it using fast boot mode because the boot loader isn't unlocked.
Now what you have to do is get it with the green light on and then the drivers installed.
Can't delete the file means that it had error while trying to flash and all that you have to do is restart the app and that goes away.
Now for the next problem is that I had this one and what I did to fix it is that I had to reinstall the drivers because those weren't correct and I did reinstalled it and it all worked good. Thanks.
Download the correct firmware for your phone (model and Country).
Use flashtool to install it on your phone
Works with a locked bootloader, no need for USB debugging.
The first error might be you ended up downloading the incorrect or incomplete firmware
I had the exact problem that you are having. I ended re downloading the flashtool a few times from various computers and then i got it to work. I figured when i downloaded it the first time i had a version that was to old/new. Or a bad connectiin when i downloaded it first time. After i downloaded flashtool again itthwn worked without issue just as it should. Whatever the provlem was for me was having to do with the download or version i downloaded wouldnt work completely. I think my internet connection when i downloaded it wasnt very good and maybe didnt download it right.
I made the same mistake too, trying to flash a z3 zip file. Then I got to run around my home city to find help. Then there's a guy. He had to open the back cover and connect directly to the circuit board in order to do something about the eMMC and SEtool or... something, I'm not sure. The phone is alive again! (costed quite a lot for a student, but... yay?). Funny though, he said the circuit board is similar to a z2 and not a z3. Maybe you could find someone who knows about these kinds of thing. Hope that help.
Girouette said:
I made the same mistake too, trying to flash a z3 zip file. Then I got to run around my home city to find help. Then there's a guy. He had to open the back cover and connect directly to the circuit board in order to do something about the eMMC and SEtool or... something, I'm not sure. The phone is alive again! (costed quite a lot for a student, but... yay?). Funny though, he said the circuit board is similar to a z2 and not a z3. Maybe you could find someone who knows about these kinds of thing. Hope that help.
Click to expand...
Click to collapse
That's strange were you on a locked bootloader?
Currently attempting to fix it once more, will update if I find anything out.
DireSpook said:
That's strange were you on a locked bootloader?
Currently attempting to fix it once more, will update if I find anything out.
Click to expand...
Click to collapse
Yeah, I think? I mean, it's right out of the box. Also, I think it's worth mentioning that the guy had to use SEtool twice to get mobile signal.
Did you fix the problem? I have the same problem now.
With a Z3v. D6708. I have a problem, got a wrong ROM, the flashee and now not start the phone in any way. The only way to start is "System Recovery" volume + power, which has 4 options: 1. "Continue Power UP", 2. "Safe mode", 3. "Factory Reset" and 4. "Power Down". The thing is try from flashtool but when I give "volume down" and connect the computer does not recognize. When light it even reaches the boot animation. When I give power with USB cable is connected in a loop is vibrating and shows red, blue and green.
I have exactly the same problem of the youtube video.
As it could fix the problem?
Some help ?
Thank you !
Pd. The device only have FastBoot.
did u solve this?
DireSpook said:
Hello,
I have recently made a horrible mistake, I flashed the incorrect ROM on my Xperia Z3v leaving the phone bricked. I am asking for your help. I have tried using the Flashtool but I am not certain if it's the phone or I that is causing a mistake. The steps thus far that I have followed.
Downloaded: Flashtool & Drivers
Installed: Drivers for Xperia Z3v
Downloaded: Firmware from XperiFirm
Now, the issue next is nothing shows up in my firmware when I attempt to flash. I have checked the source folder the .ftf files are there.
Furthermore:
When I hold VOL UP and plug in the USB>Blue led is indicated
When I hold VOL DOWN and plug in USB>Red flashes with a second of green whilst vibrating
Found this video on youtube: https://www.youtube.com/watch?v=dtaUxuorVSA
Exactly like this, checked for a solution seems like he repaired it via sony. Unfortunately for me I don't have that luxury.
**Update**
I installed the lastest release of flashtool (0.9.22.2) but it occurred to me to revert back to the previous release (0.9.18.6)
Now I can finally see the firmware but I am still having issues actually flashing the file. I get errors such as:
ERROR - root : this bundle is not valid
ERROR - Cannot delete C:\Users\Juan\.flashTool\firmwares\prepared\userdata.sin
**More Information**
I should include I am on a locked bootloader
Click to expand...
Click to collapse
got solved? me to have same problem
Bricked for days!
Is anyone still following this thread. I have the same problem after trying to install MIUI 6 on my rooted unlocked TWRP'd Xperia z3V. After the MIUI installation I have nothing but the symptoms below.
Not able to get into flashmode
No screen or bootup
No recovery
Symptoms:
1 -When plugged into PC or wall it only blinks RED/GREEN light and vibrates.
2 -Holding POWER the light turns and stays GREEN until released (then returns to #1)
3 -Holding POWER + VOLUME UP BLUE light stays on and puts phone in Fastboot mode
4 -Holding POWER + VOLUME DOWN does nothing (continues to do #1)
Please Help!!!
Google Sony Developers. Try to unlock your bootloader.
Sent from my D6708 using XDA-Developers mobile app
I think the phone will reject the command. Tried on a bricked z3v and that's the response I get from fastboot with the Sony commands given through the developer aite.
matrix$ said:
Is anyone still following this thread. I have the same problem after trying to install MIUI 6 on my rooted unlocked TWRP'd Xperia z3V. After the MIUI installation I have nothing but the symptoms below.
Not able to get into flashmode
No screen or bootup
No recovery
Symptoms:
1 -When plugged into PC or wall it only blinks RED/GREEN light and vibrates.
2 -Holding POWER the light turns and stays GREEN until released (then returns to #1)
3 -Holding POWER + VOLUME UP BLUE light stays on and puts phone in Fastboot mode
4 -Holding POWER + VOLUME DOWN does nothing (continues to do #1)
Please Help!!!
Click to expand...
Click to collapse
InkBastard said:
Google Sony Developers. Try to unlock your bootloader.
Sent from my D6708 using XDA-Developers mobile app
Click to expand...
Click to collapse
gunz.jones said:
I think the phone will reject the command. Tried on a bricked z3v and that's the response I get from fastboot with the Sony commands given through the developer aite.
Click to expand...
Click to collapse
The phone is not and most likely never will be bootloader unlocked. Planning to buy for another phone is your only option.
I've already moved to a tmo note 4. Not much development there either, but it's nice. Miss the z seires though and may come back to it next year. We'll see how they fair with phones for the next few months state side abs if prices even out on the x or z5.
I fixed mine
I bricked my phone it was just a paper weight Email Me I will make u a video step by step instructions to fix it
[email protected]
carldw said:
I bricked my phone it was just a paper weight Email Me I will make u a video step by step instructions to fix it
[email protected]
Click to expand...
Click to collapse
Unless you're going to post a link or YouTube video we all have access to, wouldn't bother asking people for direct email addresses to send them. That's the reason for PM'S and the forum on general. If you have a fix, we'd all like to know what it is you were able to do that none of us have figured out.
Need to Load Stock ROM
shashikiran said:
got solved? me to have same problem
Click to expand...
Click to collapse
Dear,
You have to load the Stock Rom / Flash it through the tool.
reroot the Phone and try again by clearing Dlavik Cache .
Sorry If am Wrong.
aranda.jc said:
With a Z3v. D6708. I have a problem, got a wrong ROM, the flashee and now not start the phone in any way. The only way to start is "System Recovery" volume + power, which has 4 options: 1. "Continue Power UP", 2. "Safe mode", 3. "Factory Reset" and 4. "Power Down". The thing is try from flashtool but when I give "volume down" and connect the computer does not recognize. When light it even reaches the boot animation. When I give power with USB cable is connected in a loop is vibrating and shows red, blue and green.
I have exactly the same problem of the youtube video.
As it could fix the problem?
Some help ?
Thank you !
Pd. The device only have FastBoot.
Click to expand...
Click to collapse
ok.you power down your phone
---------- Post added at 06:32 AM ---------- Previous post was at 06:21 AM ----------
1-power down your phone.
2-open the flashtool you can chose 32 or 64.almost we chosed flashtool 64.if you can't confirm it.you can oppen your computer and chesk naked (属性) then you will see your computer system is 32 or 64.
3-the new tool version is 0.23 and download it.install it on you computer C .
4Download the D6708 .ftf put it in C. the flashtool will led you. almost I will put it on C/user/.flash/firmwares
5-flash the software will lead you how to use you phone connect you computer with usb .
Dear devs, I really need your help. After I flashed a pre rooted marshmallow with twrp, it showed android is upgrading as it should. However after completing the upgrade, it reached lockscreen and restarted. It keeps on doing this over and over again, sometimes showing android is upgrading, sometimes not. Other times it reaches lockscreen, other times it doesn't. This continued to happen until my battery died. I cannot turn the phone off, as soon as I connect a charger, it tries to come on. Even when I turn off with power + volume up, it still comes back on without my input. I can't boot into twrp to load my backup, I can't get into flash mode to use flashtool either. I am totally stuck and have run out of ideas. I am not a total noob and have flashed roms before. Hell, I rooted a device with an unlockable boot loader. I also don't think it's a brick or bootloop, because I've fixed a boot loop before. Please guys there's no Sony repair shop in my country so that's not even an option. I am open to any suggestions apart from sending the phone to Sony
This happened with me too. Simply power off your phone from the power off button where the sim card is(small red button press it using a pin or pen) .Then download and ftf of your choice i recommend download android 4.4.2 ftf and flash it as it is simple to root using toolkit and recovery is also easy to install then install existenz mm as its much better than the stock with xperia X features and has the latest twrp recovery. simply follow this guide but download the ftf of android 4.4.2 http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
Re:
Hariskh said:
This happened with me too. Simply power off your phone from the power off button where the sim card is(small red button press it using a pin or pen) .Then download and ftf of your choice i recommend download android 4.4.2 ftf and flash it as it is simple to root using toolkit and recovery is also easy to install then install existenz mm as its much better than the stock with xperia X features and has the latest twrp recovery. simply follow this guide but download the ftf of android 4.4.2 http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
Click to expand...
Click to collapse
Tried the red button. Even removed the battery. Phone restarts immediately. Won't give me the time to boost to twrp
hello , hope you can help me folks.
i just update my xperia m4 aqua this morning via pc companion, then it gave an error message "updating failed".
then it boots and i was surprised by the sony logo in white background, but it freeze few seconds after showing the blue wave like animation. i tried using pc companion to repair it but it also gives me an error message.
Software repair error
UEGetPhoneInfoMissingInfo
E2303 3565 Unknown Nov 24 2015/14:03:56 26.3.A.1.33
1.7.2.0 / Windows 8.1 64 bit / Win32 / US
Download correct firmware for your phone (there is a special topic here with all versions) and try to flash with Flashtool.
valyo_bg said:
Download correct firmware for your phone (there is a special topic here with all versions) and try to flash with Flashtool.
Click to expand...
Click to collapse
how do i check the firmware of my unit?
Download for E2303 if this is your phone's modification, then flash with Flashtool. Do wipe of everything before that and beware that all data will be deleted, so hopefully you have backup already.
valyo_bg said:
Download for E2303 if this is your phone's modification, then flash with Flashtool. Do wipe of everything before that and beware that all data will be deleted, so hopefully you have backup already.
Click to expand...
Click to collapse
thanks my friend, i already downloaded E2303, but when i do bundle the firmware, it is not responding , im am using the latest version of Sony Mobile Flasher By Androxyde
one more question,
do the CDA# , Market and Operator of the firmware does not matter??
You can use for different market if your phone is not locked to particular mobile operator. Try to reset phone first on this order:
1. Power off phone
2. Press and hold volume down button
3. Press and hold volume up button
4. Press and hold power button
5. Hold all 3 buttons for at least 30 seconds
6. Then try to flash your phone again
valyo_bg said:
You can use for different market if your phone is not locked to particular mobile operator. Try to reset phone first on this order:
1. Power off phone
2. Press and hold volume down button
3. Press and hold volume up button
4. Press and hold power button
5. Hold all 3 buttons for at least 30 seconds
6. Then try to flash your phone again
Click to expand...
Click to collapse
thanks bro
now i got my phone working, and it's upgraded to marshmallow
:good::good::good::good:
You are welcome .
can i use this step for Sony Xperia M4 E2353 ?
i have same problem, sony logo in white background but not show blue wave like animation
You can try, hopefully will work for you.
Hi all, my Xperia tablet suddenly unable to boot, press power on is black screen, if press power + column up there is vibrate for 3 time.
I have followed few threads to flash the stock using flashtool sos successes but the unit anable to turn on too.
I try to use EMMA, it show the phone is locked, anyone can guide me how to resolve the issue, I would like to install 3rdparty rom if possible.
steve8lily said:
Hi all, my Xperia tablet suddenly unable to boot, press power on is black screen, if press power + column up there is vibrate for 3 time.
I have followed few threads to flash the stock using flashtool sos successes but the unit anable to turn on too.
I try to use EMMA, it show the phone is locked, anyone can guide me how to resolve the issue, I would like to install 3rdparty rom if possible.
Click to expand...
Click to collapse
Tablet doesn't have a vibrator motor. You can try xperia-companion to restore device.
Hi bro, I have try Sony companions , the software restore finished also unable to open the unit
Rootk1t said:
Tablet doesn't have a vibrator motor. You can try xperia-companion to restore device.
Click to expand...
Click to collapse
Hi bro, i already used Sony companion to repair the software but the screen still unable to turn on, any clues to identify is it hardware screen faulty or due to software?
thanks for you helps in advance
steve8lily said:
Hi all, my Xperia tablet suddenly unable to boot, press power on is black screen, if press power + column up there is vibrate for 3 time.
I have followed few threads to flash the stock using flashtool sos successes but the unit anable to turn on too.
I try to use EMMA, it show the phone is locked, anyone can guide me how to resolve the issue, I would like to install 3rdparty rom if possible.
Click to expand...
Click to collapse
I'm in the same situation, did u found out the solution? thanx