Hi friends
My RN4 mido got this problem a month back that its auto rotate feature has stopped working
I wiped all and tried to install its stock rom by fastboot thinking it would solve the problem; ROm installed succesfully but the problem did not solved
Is there any solution
Regards
In miui9/8 go to developer setting.... Enter cit by tapping on kernel few time and then calibrate tbe sensor not sure but g sensor i guess
Thanks,
I have done it but message coming "get default sensor failed"
Having the same problem since the Nougat update, so it's been a while. But not only my auto rotate is not working, my gyroscope, light sensor, basically all my sensors don't work and the camera is slow to power on also. Still not found a solution.
---------- Post added at 01:29 PM ---------- Previous post was at 01:25 PM ----------
Check this link: http://en.miui.com/forum.php?mod=viewthread&tid=911552&highlight=sensors
FalconMaster said:
Having the same problem since the Nougat update, so it's been a while. But not only my auto rotate is not working, my gyroscope, light sensor, basically all my sensors don't work and the camera is slow to power on also. Still not found a solution.
---------- Post added at 01:29 PM ---------- Previous post was at 01:25 PM ----------
Check this link: http://en.miui.com/forum.php?mod=viewthread&tid=911552&highlight=sensors
Click to expand...
Click to collapse
o yaaaaa
same proble
same with me
all sensor gone off, only gps working
have you tried the steps in the link provided by you
FIX FOUND!
Hey, discovered the fix a while ago, sorry for sharing so late. Made a post here on xda: https://forum.xda-developers.com/redmi-note-4/how-to/guide-fix-sensors-camera-lag-t3710918
Related
It has been a fortnight since I received my Ubislate 7c+. During this period the device screen has blanked out 3 times. On two occasions, the device started working after a few hours. However on the last occasion, it has not been possible to restart.
The technical support team suggested a reset and charge for 6-8 hrs either with the adapter or via USB. This has not solved the problem.
Anyone experienced this? Can someone suggest a solution.
Thanks
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
shubhu2604 said:
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
Click to expand...
Click to collapse
Yes, I have added some apps after I received it.
The display blanks out even when one is using it. The device appears to be ON only the display is blank. I can say this since plugging it to a laptop causes it to be recognized (ie. the OS tries to find a driver for the device).
I have tried to reset the device through the reset hole on the back without any luck.
My A116 is now four days old , and I got only one fix till now that also with wifi on. I tried many times mostly for short spans like two to five minutes. But I am getting only one or two satellites. Is this a known issue ? My phone is already running 4.2.1 so I am totally lost. Do yo guys have any suggestions, can you share your experiences ?
himadri said:
My A116 is now four days old , and I got only one fix till now that also with wifi on. I tried many times mostly for short spans like two to five minutes. But I am getting only one or two satellites. Is this a known issue ? My phone is already running 4.2.1 so I am totally lost. Do yo guys have any suggestions, can you share your experiences ?
Click to expand...
Click to collapse
Did you buy A116 with by default 4.2.1 ?
Anyway, try this. It may work for you.
Go to setting, location access, turn GPS satellites on, Check GPS EPO Assistance, Check A-GPS, Go to EPO settings, Check Auto download. After download complete, Reboot.
kamrul.auntu said:
Did you buy A116 with by default 4.2.1 ?
Anyway, try this. It may work for you.
Go to setting, location access, turn GPS satellites on, Check GPS EPO Assistance, Check A-GPS, Go to EPO settings, Check Auto download. After download complete, Reboot.
Click to expand...
Click to collapse
Yes I bought the phone started up, and voila its 4.2.1
I am trying your suggestion ( thanks I did not know the existence of EPO !? ) now.
The method indeed worked thank you.
Sent from my Micromax A116 using XDA Premium HD app
as the person said above in settings you will find the GPS settings............and go and customise it..........:good:
himadri said:
Yes I bought the phone started up, and voila its 4.2.1
I am trying your suggestion ( thanks I did not know the existence of EPO !? ) now.
Click to expand...
Click to collapse
In your 4.2.1 Canvas HD are you facing any problem with Automatic Brightness ? I mean in auto brightness mode display's brightness repeatedly changed. I upgraded 4.2.1 from home. Can you please share screen shot of "About Phone" ? If you are not sure how to take screen shot, just press Volume Down + Power button together. If you still unable to so so, please just let me know Baseband version, Kernel version, Buid number and Custom buid version.
Reason for asking for this is, I want to match downloaded details with original details. Looking forward the details.
---------- Post added at 07:02 PM ---------- Previous post was at 07:01 PM ----------
himadri said:
The method indeed worked thank you.
Sent from my Micromax A116 using XDA Premium HD app
Click to expand...
Click to collapse
If it helps you, please press thanks button
kamrul.auntu said:
In your 4.2.1 Canvas HD are you facing any problem with Automatic Brightness ? I mean in auto brightness mode display's brightness repeatedly changed. I upgraded 4.2.1 from home. Can you please share screen shot of "About Phone" ? If you are not sure how to take screen shot, just press Volume Down + Power button together. If you still unable to so so, please just let me know Baseband version, Kernel version, Buid number and Custom buid version.
Reason for asking for this is, I want to match downloaded details with original details. Looking forward the details.
---------- Post added at 07:02 PM ---------- Previous post was at 07:01 PM ----------
If it helps you, please press thanks button
Click to expand...
Click to collapse
I took the screenshot following your method. Then I was about to post but I realized that my phone is only 4.1.2 not 4.2.1. I am sorry that I have misinformed you.
Please Help me !
I am still unable to lock on to GPS apart from 1st fix.
What works for me:
1. If i switch off phone and take out battery for 30-40 seconds, the first fix is quick and almost immediate. After that it doesnt lock for 2nd/3rd or any no. of times.
2. I can get a fix by apps which download 'xtra AGPS data', but with EPO switched off. The method is unreliable and inconsistent.
3. Have tried everything for gps config to various settings in engineer mode.
4. Presently i am on stark HD mod, Initially it worked for 5-6 times, but now, i can no longer get a fix.
Please guys, i need a permanent solution.
Thanks
A pictorial representation of the fix
Please follow this thread
Hi all,
Been struggling with this for the last days.
I have a Samsung Galaxy S3, Rooted, with CM11 for i9300 (nightly).
Everything seems to work properly except for the Proximity Sensor.
When I make calls the screen will go black and won't recover.
Proximity Sensor Finder always show 0.0 cm as if objects are constantly near.
These are the things I tried so far, with no luck:
1. Opening the device and cleaning the sensor.
2. Creating a bolder separation between the two receptors of the sensor.
3. Running Auto Calibration
4. Running Manual Calibration returns:
Code:
$ cat state #finger on the sensor to test if the sensor is working properly
0
$ cat state #blank value
0
Code:
$ cat prox_cal
0,15
Which means my 'new' calibration adds up to '0' which makes no sense (is it?)
What else would you suggest? This is really frustrating
Any ideas???
Please give me something
I am also having this issue on my girlfriends T-Mobile s3 (d2lte i think) on CM11 M7-M9. Just now starting to investigate, but I will report back here if I find anything
---------- Post added at 09:42 AM ---------- Previous post was at 08:47 AM ----------
This app fixed it for me (while others that claimed they should did not). Check it out:
https://play.google.com/store/apps/details?id=it.iiizio.screenwakeup&hl=en
Thanks but...
thefanum said:
I am also having this issue on my girlfriends T-Mobile s3 (d2lte i think) on CM11 M7-M9. Just now starting to investigate, but I will report back here if I find anything
---------- Post added at 09:42 AM ---------- Previous post was at 08:47 AM ----------
This app fixed it for me (while others that claimed they should did not). Check it out:
Click to expand...
Click to collapse
Thanks but this is not really a solution.
I don't want to use an app, I want to fix the proximity sensor issue.
Any other ideas?
The point is, it was not a problem with the proximity sensor. It was a bug. Try the app, if it works, you proximity sensor is fine.
Xolusia said:
Thanks but this is not really a solution.
I don't want to use an app, I want to fix the proximity sensor issue.
Any other ideas?
Click to expand...
Click to collapse
What settings?
thefanum said:
The point is, it was not a problem with the proximity sensor. It was a bug. Try the app, if it works, you proximity sensor is fine.
Click to expand...
Click to collapse
What settings in the app did you use to test it?
Enable screen wake up, restart on startup, auto lock screen, auto wake up, 2 second time out and status bar icon.
Sent from my SM-N900T using XDA Free mobile app
Update...
I tried flashing my CWM again and downgrading the CM rom to a stable version (10.2).
Still same problem.
What else can I do? The previous user of this phone said there was no problem (he used the stock rom).
I don't want to install a third party app to "fix" it.
I need a decent solution and a functioning proximity sensor.
You can install the app temporarily, to find out if it is a hardware problem or not. No one can help you until you fully diagnose it and find the source of the problem.
Sent from my SM-N900T using XDA Free mobile app
Solved it:
http://forum.xda-developers.com/galaxy-s3/help/fixed-proximity-sensor-manual-t2930556
Anyone has this problem?
It's quite a process to unflash, back-up, reflash everything + it is quite anoying for a person to test it on. Can anyone tell me what could be wrong?
My settings:
I am on latest stock Oxygen 2.2 (happened before upgrade as well)
BlueSpark Kernel 79 (happened on stock as well)
Xposed: Gravitybox, Greenify, Youtubemods
WalkmanMod
Problem still persists, stock same result, no one with this problem?
Also happens to me sometimes. I found that lowering the volume helps. At least people stop complaining.
This solved it for me: http://forum.xda-developers.com/one...-v1-0b-2016-01-19-t3296693/page2#post65950353
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
It seems like the mic records the sound coming from the speaker of the phone. Echo cancellation should cut this off, but it seems like its not working properly. If you mute your phone the problem disappear, which should back up my theory.
Hey guys anyone have tried J320H port that posted by Dahaka/Amanu?
can you give me what problems you see or face I can help to fix its bugs as it was mine port for G360H and Dahaka/Amanu kanged without my permission
listen i can report u for these words which are fake " it was mine port for G360H and Dahaka/Amanu kanged "!
and at last cp libs dont work on cpve
if u really interested in spreading this Sh*tty words then go to xda general forums !
Dahaka said:
listen i can report u for these words which are fake " it was mine port for G360H and Dahaka/Amanu kanged "!
and at last cp libs dont work on cpve
if u really interested in spreading this Sh*tty words then go to xda general forums !
Click to expand...
Click to collapse
Well last thing may I do for you is reporting
I am downloading....
It's great!
Need some fixing
WiFi and bluetooth are laging sometimes
I tried to disable wifi power safe mode *#1111# then options > wifi , scroll down to end and choose off
Now it alitle bit lagging and diconnecting from past
But still switch off when switch screen off
---------- Post added at 12:05 PM ---------- Previous post was at 11:08 AM ----------
@AdaM If you want to fix thus problems then , contact me, I have open Internet wifi I can download and test.
I will back to stock cause no custom rom are fine with me till now but this is the best
ahmdnz7797sy said:
It's great!
Need some fixing
WiFi and bluetooth are laging sometimes
I tried to disable wifi power safe mode *#1111# then options > wifi , scroll down to end and choose off
Now it alitle bit lagging and diconnecting from past
But still switch off when switch screen off
---------- Post added at 12:05 PM ---------- Previous post was at 11:08 AM ----------
[/COLOR @AdaM If you want to fix thus problems then , contact me, I have open Internet wifi I can download and test.
I will back to stock cause no custom rom are fine with me till now but this is the best
Click to expand...
Click to collapse
Hmm nice well I have wifi fix when screen off, but idk about bt it was good on core prime btw if you have telegram pm me for wifi fix @adamayyad
AdaM said:
Hmm nice well I have wifi fix when screen off, but idk about bt it was good on core prime btw if you have telegram pm me for wifi fix @adamayyad
Click to expand...
Click to collapse
Ok
Can I have a link for Vlauncher of the viper is please,