Anyone has this problem?
It's quite a process to unflash, back-up, reflash everything + it is quite anoying for a person to test it on. Can anyone tell me what could be wrong?
My settings:
I am on latest stock Oxygen 2.2 (happened before upgrade as well)
BlueSpark Kernel 79 (happened on stock as well)
Xposed: Gravitybox, Greenify, Youtubemods
WalkmanMod
Problem still persists, stock same result, no one with this problem?
Also happens to me sometimes. I found that lowering the volume helps. At least people stop complaining.
This solved it for me: http://forum.xda-developers.com/one...-v1-0b-2016-01-19-t3296693/page2#post65950353
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
It seems like the mic records the sound coming from the speaker of the phone. Echo cancellation should cut this off, but it seems like its not working properly. If you mute your phone the problem disappear, which should back up my theory.
Related
I have this issue: I'm running on CM10, build 2012-08-18 and I would to like to upgrade to latest build. When I install CM10 nightly (or anything build) over the original build and then I make a call I don't hear anything :crying:
OK, then I make full wipe and voila, it works! OK, I wait when applications restore from google account but they don;t restore all settings (for example Touchdown), so I restore Apps/Data/Both via MyBackup Restore and... no sound when make call :crying::crying:
Long story short: on CM10 I cannot restore anything else I lost sound when callind (no ringtone but don't hear second side).
This is unpleasant because restoring system get a lot of time.
Any ideas?
P.S. More into about my phone: flashed original ROM via ODIN, then root and recovery, then CM10. No Jelly Bean leaked ROMs were installed after flashing original ROM (ICS).
Same here!
Do you found a fix?
Yeah. M also facing same
pradeepb said:
Yeah. M also facing same
Click to expand...
Click to collapse
Try flashing modems. If it dont work, send to technical assistence.
Enable lockscreen sounds....known cm10 problem
any resolution? i have sound working until i make first call in ANY app (viber,skype,csipsimple,caller).
doggydog2 said:
any resolution? i have sound working until i make first call in ANY app (viber,skype,csipsimple,caller).
Click to expand...
Click to collapse
read above
I don't even have lockcreen enabled and I don't see any sound settings there.
I got the same problem on cm10.1 2012-01-03 nightly, this is a serious problem that they need to solve..
---------- Post added at 12:51 PM ---------- Previous post was at 12:48 PM ----------
OK I just solved this problem by enabling lock screen sounds, at first it did not work but then I restarted and it works, credits to whoever figured this out
shaneel1491 said:
I got the same problem on cm10.1 2012-01-03 nightly, this is a serious problem that they need to solve..
---------- Post added at 12:51 PM ---------- Previous post was at 12:48 PM ----------
OK I just solved this problem by enabling lock screen sounds, at first it did not work but then I restarted and it works, credits to whoever figured this out
Click to expand...
Click to collapse
Did you mean 2013-01-03? Me too but for me helped enabling repro during the call and then disabling it and then all works well
It is a really really annoying bug. A system sound has to be made first - the lock screen does that IF you have sound on. If you make a call before doing this, forget about any sound.
I agree it is a pain in the arse and if I knew how to fix it I would. You can use Tasker to reset the volume, play a sound, then reset volume, but it is annoying. Only thing stopping me switching over.
SOLVED
Hi guys.
Don't know if this helps someone now, but i had this problem recently on two different phones. Two weeks ago with my HTC One M7 and today with my girlfriends SGS3 i9305. with HTC i didn't figured out back then what was the problem, but i fixed it somehow after re-flashing/re-installing .. but now i think i know what was the problem. With both phones in-call sound/mic disappeared for no reason. what i noticed in both cases problem was restoring my setting from Google account. with HTC i did not give attention to that, i was happy that it worked after some 5h of trying different things. But now with SGS3 after many attempts i tried without Google restore and voila ... works just fine. After this i connected phone to Google account, but did not restored settings.
I rad many forums and saw that in case of SGS3 it can be hardware problem..but in my case I've tried VIBER and everything was working good. so it was not mic/earpiece problem for sure.
Hope someone finds this useful.
Happy Holidays to everyone!
It has been a fortnight since I received my Ubislate 7c+. During this period the device screen has blanked out 3 times. On two occasions, the device started working after a few hours. However on the last occasion, it has not been possible to restart.
The technical support team suggested a reset and charge for 6-8 hrs either with the adapter or via USB. This has not solved the problem.
Anyone experienced this? Can someone suggest a solution.
Thanks
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
shubhu2604 said:
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
---------- Post added at 01:10 PM ---------- Previous post was at 12:59 PM ----------
Did you alter anything related to the stock configuration...???
What exactly is the problem..?? It switches of or the screen just turns blank. ??
Click to expand...
Click to collapse
Yes, I have added some apps after I received it.
The display blanks out even when one is using it. The device appears to be ON only the display is blank. I can say this since plugging it to a laptop causes it to be recognized (ie. the OS tries to find a driver for the device).
I have tried to reset the device through the reset hole on the back without any luck.
Dear users,
I'm new owner of X820 4GB/32GB from yesterday. I changed stock rom by latest Small EUI by Aurel with last patch and after I tried Resurrection Remix 3.8.3. In both systems I had problem during phone call, I hear no beeps and voice. It's same with receiver and main speaker, I can hear only end call beep. I was afraid that it's problem with my phone, but when I restore my stock rom, it works well here.
Can anybody help me, where could be problem?
EDIT: I wiped phone to factory defaults and reflashed rom without Viper and calling works well!!! If someone know, how to use Viper with working call, let me (us) know please.
I'm having the same issue bro...
It was due to viper4fx in my case...
akkiman.01 said:
I'm having the same issue bro...
It was due to viper4fx in my case...
---------- Post added at 03:12 PM ---------- Previous post was at 03:12 PM ----------
I'm having the same issue bro...
It was due to viper4fx in my case...
Click to expand...
Click to collapse
Thanks for your reply. I thought so little bit. I had Viper too. I previously tried only uninstall drivers and nothing happened, but now tried remove Viper directly and call audio works well.
EDIT: No it don't works, it works only when I tried call my phone number, when I call other no. it's quite.
the call is connected but I can't hear voice anymore... the mic is also not working...
I happens only with calls...
I tried to fully uninstall the viper driver but still no success...
Please anyone tell me how to fix this without flashing the stock ROM as I have exhausted my net pack
Hi friends
My RN4 mido got this problem a month back that its auto rotate feature has stopped working
I wiped all and tried to install its stock rom by fastboot thinking it would solve the problem; ROm installed succesfully but the problem did not solved
Is there any solution
Regards
In miui9/8 go to developer setting.... Enter cit by tapping on kernel few time and then calibrate tbe sensor not sure but g sensor i guess
Thanks,
I have done it but message coming "get default sensor failed"
Having the same problem since the Nougat update, so it's been a while. But not only my auto rotate is not working, my gyroscope, light sensor, basically all my sensors don't work and the camera is slow to power on also. Still not found a solution.
---------- Post added at 01:29 PM ---------- Previous post was at 01:25 PM ----------
Check this link: http://en.miui.com/forum.php?mod=viewthread&tid=911552&highlight=sensors
FalconMaster said:
Having the same problem since the Nougat update, so it's been a while. But not only my auto rotate is not working, my gyroscope, light sensor, basically all my sensors don't work and the camera is slow to power on also. Still not found a solution.
---------- Post added at 01:29 PM ---------- Previous post was at 01:25 PM ----------
Check this link: http://en.miui.com/forum.php?mod=viewthread&tid=911552&highlight=sensors
Click to expand...
Click to collapse
o yaaaaa
same proble
same with me
all sensor gone off, only gps working
have you tried the steps in the link provided by you
FIX FOUND!
Hey, discovered the fix a while ago, sorry for sharing so late. Made a post here on xda: https://forum.xda-developers.com/redmi-note-4/how-to/guide-fix-sensors-camera-lag-t3710918
I'm having the strangest problem, and I've experienced this on multiple Android 10 only roms for Platina, it is relating to audio problems. It is the only thing I have trouble with on this ROM and wonder if anyone you had the same thing? I believe they are all related in some way!
Problem 1: When I use the regular dialer, and dial out, the dialing tone after calling a number comes through the speaker output and switches to normal ear piece sound the moment the call is answered
Problem 2: Using apps like WhatsApp, WeChat, LINE, and Kakaotalk, if making AUDIO only calls, I cannot hear the other person through the normal ear piece but if I switch to speaker, it works fine. The other person has no problem hearing me at all. Using Video chat works just fine and in normal fashion.
Problem 3: Whenever I am on speaker in any application, Increasing or decreasing the volume doesnt do anything
Could you tell me the location of the Audio file maybe I can look through in my file explorer and compare it to what a normal audio file should look like?
I've checked Volume, permissions, etc.. and cant figure this out. I've searched forums and everything and most people have a problem with the mic, not the speaker on their end.
Thanks for any help
Again, no problems if I use a Android 9 (custom or official), and it's just the earpiece speaker in apps other than the normal dialer. (normal dialer works like it should)
Flash this zip that I made and tell me https://mega.nz/file/xBoEAIxY#02Pp2SEnmnrS9f0kr8tJp_SNQfLMR7WEIYhIAO9pPq8
what rom Q u using?
---------- Post added at 12:07 AM ---------- Previous post was at 12:06 AM ----------
coz that old issue
soyimparable said:
Flash this zip that I made and tell me https://mega.nz/file/xBoEAIxY#02Pp2SEnmnrS9f0kr8tJp_SNQfLMR7WEIYhIAO9pPq8
Click to expand...
Click to collapse
First of all, thank you for trying to help me. Lately I've seen some questions go unnoticed. As I only have access to my dad's phone at the moment and he only has whatsapp and viber, i tried those too. Whatsapp still suffers from the same problem I noted. I never tested it on Viber prior so I can't comment, but when I created a voice to voice call, I hear it finally on my phone but it comes through the speaker but it isnt on speaker mode. If I turn on speaker mode on my phone, the volume is just much louder.
Regarding the normal dialer and dialing, I actually switched to Bliss Rom 12.7 after writing the original question and that part seemed to be already solved when I tested it.
Not sure which question of mine you sought to try to help me with?
ndrabodo said:
what rom Q u using?
---------- Post added at 12:07 AM ---------- Previous post was at 12:06 AM ----------
coz that old issue
Click to expand...
Click to collapse
Back in April when I was mainly trying to switch to Android 10, I tried almost all of them that were up in the ROMS section. I haven't tried the xiaomi official one yet but I did try xiaomi eu miui 12 with android 10 and that also has this problem.
Currently running Blissrom 12.7 that was released just a few days ago
It just doesnt make sense how I see no one else having this problem, yet my ear piece is working fine for normal operation and/or when I am running Android 9 on the phone.
I've tried playing around with OK GOOGLE, GOOGLE ASSISTANT, I dont use either now those so they were already off or didnt exist in my settings, but since installed and tried all kinds of variations.