Related
I tried to flash JB using this guide http://forum.xda-developers.com/showthread.php?t=2204715 ,i deleted the cid, flashed the kernel and when the phoned restarted it would not boot, it startes to boot, the moto logo appears, contact your provider appears with the logo and then nothing, the phone wont boot, i cant go into BMM because it was deleted after flash, PLEASEEEEEE HELP
i wanted to flash the original firmware with RSD but i cant find i download link that works
Found it, http://sbf.droid-developers.org/umts_spyder/list.php
You can boot through BP Tools mode i guess..
Sent from my Nexus 7 using xda app-developers app
senk1gsc said:
I tried to flash JB using this guide http://forum.xda-developers.com/showthread.php?t=2204715 ,i deleted the cid, flashed the kernel and when the phoned restarted it would not boot, it startes to boot, the moto logo appears, contact your provider appears with the logo and then nothing, the phone wont boot, i cant go into BMM because it was deleted after flash, PLEASEEEEEE HELP
i wanted to flash the original firmware with RSD but i cant find i download link that works
Found it, http://sbf.droid-developers.org/umts_spyder/list.php
Click to expand...
Click to collapse
Hi there,
Could you solve your issue?
I have had the problem almost four times, so I can tell you only one think: relax, your razr is not going to die, there is always an answer, just need to be patience and read A LOT.
If there is anything I can help you, let me know.
iZak17 said:
Hi there,
Could you solve your issue?
I have had the problem almost four times, so I can tell you only one think: relax, your razr is not going to die, there is always an answer, just need to be patience and read A LOT.
If there is anything I can help you, let me know.
Click to expand...
Click to collapse
Yes i found a solution, but unfortunately i lost the original system so i had to delete CID and flash the china retail on the device
Hello people.
I have KINGZONE SM-N9002 (Clone of Samsung Galaxy Note 3) MTK6582 and today I tried to install this ROM (Android 4.4 KitKat) -> needrom.com/download/am3-kk-v1-0-for-kingzone-sm-n9002 . I did everything, wiped data/cache/ everything I needed to and installed it . Then clicked on Reboot, and what happened is that my phone doesn't reach the menu, it just reboots showing the logo screen every time constantly!!!! I clicked on restore on Recovery mode, but it seems there are no files there. I tried to to reflash my ROM using this -> needrom.com/download/kingzone-sm-n9002-mt6582 but when I do it using Flash Tools, I get the error Invalid scatter file format. Please help! I'm in terrible need of my phone and since it is a clone, I will have to send it back to China and wait ages for it get back. Plus, I'm leaving for Scotland in two weeks time so I'm in desperate need of my phone. I cannot do anything!!! I have Flash Tools and MTK Droid Tools on my PC, so can you suggest anything that can save me????
I finally managed to flash my ROM using SP Flash tools but now my screen shows something like green pixels and it doesn't respond to anything!!!! It's like my display is completely "broken".... Please help!
Hi
I'm new her and sorry for my bad English
I have a wiko lenny phone a few days ago my phone stuck on wiko logo on welcome screen and blocked there even if I tried to charge it battery logo appears without percentage of charging and the screen always power on and red led not working so i flashed it by sp flash tool but didn't work although sp flash tool program said phone flashed successfully!!
I can't hard reset it because it says : CANNOT GET ENCRYPT STATE
so please anyone can help me...
thanks
any help please...
I'm still waiting...
Flash
Flash the stock rom again :3 search for it on needrom
Give a flash with latest STOCK ROM for your device, after flashing still getting boot-loop give a hard reset It should work after reset.
For Flashing U need
1-USB drivers
2-Latest Flashing Tool
3-Latest Stock ROM
STOCK ROM check HERE
2nd LINK HERE
Also please provide us Complete info of your device.
Thanks
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
I had the same problem , and I fixed it.
When you install the TWRP for some reason the data partition get corrupted to resolve this you need to do the following :
---- before you do any thing capture the following information and keep it ----
IMEI , Barcode, Modem Version, Bluetooth MAC , WIFI MAC address
IMEI, barcode and Modem Version details can be found in the factory mode:
- switch your phone off
- Press power button and volume down -- you will boot into factory mode
- from the menu select version ( scroll using volume down button ) click power button
you should see BB chip details, MS Board, etc
note down the following into a paper or to your computer and keep it ( in my case it was useful when I changed the rom)
1- IMEI numbers
2- Modem Version ( Baseband version)
3- barcode number ( I found this info only in this menu)
for the (Bluetooth and WIFI) MAC address you need to boot into your phone and go to settings , scroll down to About phone ( in my case I need to click to More) , then click on Status
you will found ( also you can found the IMEI information it should match what you capture above)
1- Bluetooth MAC address
2- WIFI MAC address
now you have everything you need to format your mobile in case that was needed.
---- Note the following steps will wipe your contacts and reset the phone settings, data on your SD card should not be effected -------------
To root your mobile do the following:
1- install TWRP using SP_Flash
2- copy SuperSU to your SD card
3- reboot to recovery (into TWRP)
if you install SuperSU, now you should notice that it didn't complete and there are some errors for that you need to fix the data partition before install SuperSU
4- click wipe, click Advanced Wipe
5 - select Data and Click on "Repair or Change File System"
if its corrupted the size should be 0 to fix it continue step 6
6- Click change File system and change it to EXT4
7- Wipe to Change it should format the partition for you
when complete check the size of the partition is not 0
if its still 0 " Click Repair File System" in menu of step 5
now you are ready to install SuperSU
Lava iris r1s
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Rooting or TWRP for LAVA R1s
Please help me to root Lava R1s model .. tried with kingoroot and other once click root apps all failed .. kindly give working link for TWRP recovery for LAVA R1s , not able to find in the internet.
Lava r1 s, add stock rom
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
Custom rom required for lava r1s non camera
vsingh1611 said:
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Click to expand...
Click to collapse
HELLO TEAM,
PLEASE SEND ME THE CUSTOM ROM FOR LAVA R1s+ NON CAMERA ANDROID PHONE. AND ALSO PLEASE TELL ME THE STEPS HOW TO FLASH THE CUSTOM ROM. FROM THE ABOVE I JUST SEE THE STEPS TO INSTALL THE ROM,BUT NO ONE HAS SEND THE PROPER CUSTOM ROM LINK FOR LAVA R1s NON CAMERA PHONE. KINDLY REPLY FOR THE SAME.
software update error lava r1s
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
Please tell me how to troubleshoot my software update error in my LAVA R1s non camera Android phone. The software update notification keeps on popping up. And when I click on the notification update then I get the following error saying " Not enough memory. Update needs atleast (109.82mb)". I even have hard resetted the phone but I still get the same update error later on once it gets completely resetted. As soon as it gets connected to internet data connectivity I get the pop ups for software update. How do I get rid of the same.
root lava r1
Hello...
U can try magisk manager method.
It is worked in my lava r1 2gb ram device.
Take patched boot file from magisk manager and flash it via sp flash tool.
coolmanrakesh said:
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Click to expand...
Click to collapse
I have build ressurection remix nougat. You can try it.
https://forum.xda-developers.com/android/development/lava-r1s-camera-gps-ressurection-remix-t4145507
I fuk*d up and bricked my phone , try to install a TWRP recovery and it didnt go well, now is in boot screan and cant do nothing , oc only recognizes wene remove de baterry and push volume down but its just for a bit.
I have a selecline S6S5IN3g , chipset sc7731 spreadtrum , i nee the stop firmware and i only find one from a site and it needed money to get password and it look like a scam
If anyone has the firmware pls share :crying:
Me too. I need the stock ROM for this device.
Me too. I need the stock ROM for this device.