Related
Hello there.....just had a few queries. First of all, I tried to unlock the bootloader, but it always get stuck at 50% and says the account on device is different from the account you are logged in with. I have both the adb and fastboot drivers installed, and its getting detected through adb devices and fastboot devices command. The next thing I learned from some other post of that you have to upgrade to the latest developer rom. So I downloaded it, but in updater app, its showing, "can't verify the package". I think, one can directly flash the developer rom over the stable global rom. Any help would be appreciated.
EDIT : I successfully flashed the latest global developer rom through EDL mode, using MiFlash. And, then the bootloader got unlocked in seconds.
I would like to know if you are on the Latest MIUI Global Stable release for Kenzo, or not i.e. the MIUI version will be V8.0.1.0 LHOMIDG. If yes, follow the following process to upgrade your device to the latest MIUI Global Developer version.
Caution:- This method will wipe your apps and factory reset the phone. Your internal storage shall remain unaffected. Take a backup from the settings menu first and then proceed at your own risk.
1. Download the last LP based MIUI 8 v6.8.18 from here - http://bigota.d.miui.com/6.8.18/miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
2. Move the zip file to the root of your internal storage.
3. Open the Updater App. Click on the 3dot menu on the top right and select "Select Update package". Browse to the v6.8.18 ROM zip file and select it. The App will tell you that updating to this version will erase your data. Proceed to Erase and reboot.
4. Wait while MIUI updates.
5. Now download the latest MIUI 8 v6.9.9 based on MM from here - http://bigota.d.miui.com/6.9.9/miui_HMNote3ProGlobal_6.9.9_f26648d8b5_6.0.zip
6. Repeat everything as it is but replace the zip file to the newer one.
7. When the Phone reboots after updating. just restore your backup from the Global Stable and you shall be good to go.
hey freinds.......i have jst got my new kenzo (sd).........i have applied for unlocking permisions and got approval also......................but whenever i try to unlock my phone using unlock tool it shows id mismatch and gets stuck at 50%..............................:crying:
im on stock miui 7.5 global stable rom (lollipop)...............du i need to flash any file/ dev rom/ chinese rom before unlocking...............................
this method worked for me when i was on V8.0.6.0.LHOMIDG MIUI8.
1- you need to switch from global stable to global developer rom, download the latest global developer rom on android lollipop(5.1).
unfortunately xda won't let me include links,so google this : miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
2- after downloading the rom,rename the file name to Update.zip then copy to internal storage(in downloaded_rom folder).
3- open updater app, select choose update package, go to downloaded_rom folder and select Update.zip. It will verify your rom and install it.
4- download the latest global developer rom from en miui , repeat the steps 2 and 3.
5- sign in to your mi account on your device(enable find device),also on i.mi.com(to check your device). enable developer options,OEM unlocking and USB debugging.
6- download the latest version of MIFlashUnlock tool and log into your account
7- turn off your device and go to fastboot (press and hold volume - and power button at the same time), connect your device to your PC, click unlock(on MIFlashUnlock tool), after your bootloader successfully unlocked, click on reboot.
It is simple
Sorptarn said:
hey freinds.......i have jst got my new kenzo (sd).........i have applied for unlocking permisions and got approval also......................but whenever i try to unlock my phone using unlock tool it shows id mismatch and gets stuck at 50%..............................:crying:
im on stock miui 7.5 global stable rom (lollipop)...............du i need to flash any file/ dev rom/ chinese rom before unlocking...............................
Click to expand...
Click to collapse
Before begin the process of unlocking, go-to I.mi.com and sign in there and locate yourself ,(you have do this process in your Kenzo and pc ) .This will verify your phone location and try to unlock bootloader
This method helped me unlock bootloader
anandsgy said:
Before begin the process of unlocking, go-to I.mi.com and sign in there and locate yourself ,(you have do this process in your Kenzo and pc ) .This will verify your phone location and try to unlock bootloader
This method helped me unlock bootloader
Click to expand...
Click to collapse
bro this isn't working....still stuck at 50%
strat1959 said:
this method worked for me when i was on V8.0.6.0.LHOMIDG MIUI8.
1- you need to switch from global stable to global developer rom, download the latest global developer rom on android lollipop(5.1).
unfortunately xda won't let me include links,so google this : miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
2- after downloading the rom,rename the file name to Update.zip then copy to internal storage(in downloaded_rom folder).
3- open updater app, select choose update package, go to downloaded_rom folder and select Update.zip. It will verify your rom and install it.
4- download the latest global developer rom from en miui , repeat the steps 2 and 3.
5- sign in to your mi account on your device(enable find device),also on i.mi.com(to check your device). enable developer options,OEM unlocking and USB debugging.
6- download the latest version of MIFlashUnlock tool and log into your account
7- turn off your device and go to fastboot (press and hold volume - and power button at the same time), connect your device to your PC, click unlock(on MIFlashUnlock tool), after your bootloader successfully unlocked, click on reboot.
Click to expand...
Click to collapse
i hv installed miui dev latest 8.11.... mm rom..........will it work or i have to download lp rom
Sorptarn said:
i hv installed miui dev latest 8.11.... mm rom..........will it work or i have to download lp rom
Click to expand...
Click to collapse
I don't think so, If you're already on dev - you need to perform the steps 5 to 7. If it didn't work,try to log into your account with your phone number(for account on your phone,i.mi.com and MIFlashUnlock tool) - also check your mi account info, the country you choose should be the same as you phone number, don't choose another country!
bro...I mean mm to lp downgrade ki need th nhi hai mjhe???.......
Sorptarn said:
bro...I mean mm to lp downgrade ki need th nhi hai mjhe???.......
Click to expand...
Click to collapse
I understood that from your first reply,no,you don't need to downgrade.It's recommended to do this unlocking process on the latest rom. just follow my last comment,specially logging from your phone number not your email into your account...also perform factory reset just to be 100% sure.
for comprehensive information about the unlocking process,check the forum on en miui and look for the following threads :
1- [FAQ Sessions] Mi Devices Bootloader Unlocking FAQ: Announcement, Troubleshoot, and Tips
2- [Tools, Tips & Tutorials] [Device Team]Unlock Bootloader-No more "Couldn't Verify Device" Error
strat1959 said:
this method worked for me when i was on V8.0.6.0.LHOMIDG MIUI8.
1- you need to switch from global stable to global developer rom, download the latest global developer rom on android lollipop(5.1).
unfortunately xda won't let me include links,so google this : miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
2- after downloading the rom,rename the file name to Update.zip then copy to internal storage(in downloaded_rom folder).
3- open updater app, select choose update package, go to downloaded_rom folder and select Update.zip. It will verify your rom and install it.
4- download the latest global developer rom from en miui , repeat the steps 2 and 3.
5- sign in to your mi account on your device(enable find device),also on i.mi.com(to check your device). enable developer options,OEM unlocking and USB debugging.
6- download the latest version of MIFlashUnlock tool and log into your account
7- turn off your device and go to fastboot (press and hold volume - and power button at the same time), connect your device to your PC, click unlock(on MIFlashUnlock tool), after your bootloader successfully unlocked, click on reboot.
Click to expand...
Click to collapse
I downloaded developer ROM but it says package verification failed when I try to flash
Adarsh2000 said:
I downloaded developer ROM but it says package verification failed when I try to flash
Click to expand...
Click to collapse
This error(on updater app) happens if you're trying to switch from global stable(lollipop) to global developer(marshmallow),follow the instructions. Download the latest global developer on LOLLIPOP and try. After you successfully switched to global developer then download the latest global developer(marshmallow).
strat1959 said:
This error(on updater app) happens if you're trying to switch from global stable(lollipop) to global developer(marshmallow),follow the instructions. Download the latest global developer on LOLLIPOP and try. After you successfully switched to global developer then download the latest global developer(marshmallow).
Click to expand...
Click to collapse
How can I know that a ROM is based on android 5 or 6. en.miui.com is very confusing.
Adarsh2000 said:
How can I know that a ROM is based on android 5 or 6. en.miui.com is very confusing.
Click to expand...
Click to collapse
You have to google it to find out about the versions of miui, this is the link of the latest global developer rom on lollipop for rn3sd(redmi note 3 pro/snapdragon variant - KENZO).
bigota.d.miui.com/6.8.18/miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
If you've flashed a non-stock recovery like TWRP*, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
* TWRP is now officially supported, make sure you flash that version if you're using an older, unofficial TWRP.
1. Obtain the ROM you want to install. Make sure the download is from miui.com if you want stock
Official site -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab. The website does not update links immediately after a ROM update is released, so you may have to do a bit of digging if you want a very recent update.
You can also check ROM links on third party sites like ezbox.idv.tw, again, make sure the actual download links are from miui.com and not somewhere else.
Latest EEA ROM(Android 10) as of 2020-10-24 -
V12.0.3.0.QFJEUXM
Nightly official LineageOS builds
2. Get into TWRP
Either run 'adb reboot recovery'
Or power phone off and boot into TWRP by holding PWR+VOL_UP during boot
3. Upload the ROM to the phone
Code:
adb push ~/Downloads/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B] /sdcard/
4. Flash the ROM via TWRP
5. Flash Magisk if you use it, because flashing the ROM deletes it.
6. Remove the update file:
Code:
adb shell rm /sdcard/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B]
That's it! Reboot your phone into your new ROM!
Also check out my debloat list and my detailed phone settings.
Additional note - formatting /system will brick your phone and you'll have to recover using a fastboot ROM.
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Benfatica said:
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Click to expand...
Click to collapse
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Micdu70 said:
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Click to expand...
Click to collapse
Thanks,I was able to get it over ota but it doesn't come now has xiaomi removed it or something
I also get this message if I try to download the latest package. Is something wrong with my phone
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
C0rn3j said:
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
Click to expand...
Click to collapse
Ok thanks, but why though ??
My last update is 10.3.11.0 July security patch
C0rn3j said:
If you've flashed a non-stock recovery like TWRP, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
So how to get around this when the updater is telling you there is an incremental update?
Simple, we tell the updater to download the full image instead, move the update from the original folder so MIUI won't attempt to upgrade from it on next reboot, boot into TWRP and flash the image there.
1. Settings -> About Phone -> System update -> three dots -> Download latest package
2. Get filename of the update:
3. You now have the filename of the update. I got miui_DAVINCIEEAGlobal_V10.3.15.0.PFJEUXM_b6738621e2_9.0.zip and will be using this name throughout the rest of this how-to, replace the examples accordingly based on what name you got.
4. (optional) Backup the latest ROM file to your PC:
5. Prevent MIUI from seeing the update file and trying to update from it on accident by moving the file a folder higher:
6. Power phone off
7. Boot into TWRP by holding PWR+VOL_UP during boot
8. Flash the ROM via TWRP
9. Flash Magisk if you use it, flashing the ROM deletes it.
10. Boot back into Android and remove the update file:
That's it!
You can also download the full ROM directly through miui.com, but keep in mind the website does not instantly update the link there after a ROM update is released.
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
In my case the ROM download through phone was corrupted and I had to edit the site URL from the filename I got to get a proper update file:
Click to expand...
Click to collapse
Redmi K20 Open Beta File Link?
Wrong thread.
Don't quote the OP, it clutters the thread.
For people who want the 10.3.15.0 update. I uploaded it to mega. Link is here:
https://mega.nz/#!pddQUaBL!s5En8LWaxWciUyNowU8_rYYMk2D48Dj8J7_PbJwv0kc
C0rn3j said:
...
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
...
Click to expand...
Click to collapse
The most accurate, updated and actual site for Mi 9t/K20 (davinci) firmware/rom - https://mirom.ezbox.idv.tw/en/phone/davinci/
10.3.15 ota is back online, just received it
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
rastip said:
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
Click to expand...
Click to collapse
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
rastip said:
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
Click to expand...
Click to collapse
Nothing will happen to it
If the Magisk have to be flashed again, does it mean all the hide settings which were there before has to be set again or stay there from the old version? I have few apps in Magisk hide root, so just wondering how this will be affected with rom update
A second question:
I am on 10.3.12.0 not upgraded yet to 10.3.15.0.
Can I upgrade straight to V11.0.2.0 or first to 10.3.15.0 and then to V11?
---------- Post added at 05:27 PM ---------- Previous post was at 05:09 PM ----------
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
While flashing did you untick Recovery in the TWRP as I believe the whole 2,2GB ZIP has recovery image and could be flashed and overwrite the TWRP?
Your guide not working, twrp failed to install the update "file corrupted".
I've downloaded the OTA package from "http://c.mi.com//miuidownload/detail?device=1700361" and twrp very happy to install this file, my Mi_9T at the latest update 11.
Unfortunately the archive downloaded through the Updater cannot be flashed as is through TWRP (message: file corrupted)
miui_RAPHAELEEAGlobal_V11.0.3.0.QFKEUXM_153f9511ae_10.0.zip
Just received the new update.
Thanks for notification, also just received it.
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
bmwbasti said:
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
Click to expand...
Click to collapse
Backup everything on your phone.
From what I understand; if you flash an OTA zip you'll end up on MIUI without root or TWRP unless, whilst still in TWRP after the zip has flashed, you immediately flash TWRP's image again along with Magisk without rebooting even once so that both persist.
That's if TWRP let's you flash whatever file ends up in /sdcard/downloaded_rom to begin with. Flashing MIUI zips - typically only supported by OrangeFox if I remember correctly. And if I'm right MIUI updater will download the full rom instead of an OTA if it detects a custom recovery.
I'd advise backing up everything before going ahead. If you want OTA your best bet might be to go on your PC and do "fastboot boot twrp.img" instead of "fastboot flash recovery twrp.img" then use the temporary TWRP to install the OTA zip and Magisk zip - that way it'll patch the stock bootloader.
I'd wait for someone with a little more knowledge though. I could be deathly wrong as I've only read this stuff and not updated MIUI with OTA before.
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Micdu70 said:
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
here's the download link
https://bigota.d.miui.com/V11.0.2.0.QFKMIXM/miui_RAPHAELGlobal_V11.0.2.0.QFKMIXM_6050442ee4_10.0.zip
r4yv3n said:
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
Click to expand...
Click to collapse
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Any OTA at this time or just full rom?
Found ota file, downloading now
https://bigota.d.miui.com/V11.0.2.0...QFKMIXM-V11.0.2.0.QFKMIXM-a84af52957-10.0.zip
Micdu70 said:
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Click to expand...
Click to collapse
https://drive.google.com/file/d/10IJ_zGk77vxgeTpbOuR0GY9lhekbivSz/view?usp=drivesdk
?
This is from 11.0.1
I had to return back , stuck in fastboot ?
how much sot here?
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I think it's been withdrawn. It never officially came out of beta. They're still trying to fix a few minor Q bugs like battery drain and camera app issues; on top of that the development for MIXM in particular has been a bit behind - probably due to Chinese new year and/or Coronavirus. Though it's possible the MIXM (or Global) branch is compiled outside China; truth be told I have no idea why the Q update has been handled so badly for this particular device channel. The Mi9T Pro's development has been seemingly 'paused' as of late for Global users.
Reminds me a lot of my Redmi 5 Plus. Development was paused for much of the product's lifespan and they never fixed certain bugs on the device; just merged MIUI branch changes. Hopefully the same doesn't happen to the Mi9T Pro. It is a flagship-esque device and barely six months old (August 2019).
?Miui Global Stable Mi V11.0.2
? Android 10 | Miui 11
? 2/15/2020
?Changelog:
Deodex
Add Call, Contact and SMS MIUI
Center Clock
And You
For the Install Process MANDATORY Using Custom Recovery DX By MiRoom
If you do not use Custom Recovery DX By MiRoom, it will definitely enter Fastboot mode
? For the installation process, please see / download the video below. ?
? Download Video / Streaming: here
? Download Rom: here ?
Download vbmeta.img: here | Mirror
Download Custom Recovery DX By MiRoom Install via Fastboot mode : here
By Redmi K20 Pro Indonesia
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I had to download the OTA zip someone sent here and ended up manually updating. Tap a few times on the 11 in the updater until a toast message pops up saying that you enabled additional options and then tap on 3 dots and select Choose update package and browse to the zip you downloaded and select it.
Honestly I have like since forever used custom ROMs on my phones and this time I wanted to have the "stock experience", but if they keep delaying updates like this I'll just switch to xiaomi.eu weekly builds.
Since 31st of January Xiaomi suspended temporarily all updates due to the Corona virus outbreak.
How do i flash ota file manually on non rooted phone?
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Snah001 said:
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Click to expand...
Click to collapse
The option "Choose update package" doesn't show up unless you tap the 11 in the Updater a few times, because manually installing a .zip is an advanced (duh) option.
Was assuming that people here would know.
I want to change the region of my phone using the following instruction https://forum.xda-developers.com/t/...dated-instructions-now-working-again.4143415/
However it works only on RUI1.0. I am currently on official vanila not rooted RUI3.0 rom (EU, F.19), so I need to downrgrade. I belive that I need to downgrade in two steps: firstly from RUI3.0 to RUI2.0, then from RUI2.0 to RUI1.0.
An now I m stuck on the first step. None of the methods that I've found on the web work. Native realme explorer does not offer me the update when I click on .zip or .ozip package, but just extract. If I go to Settings > About Phone and tap on the realme UI 3.0 Software Version situated at the top, then tap on the overflow icon situated at the top right and select Local Install, the downgrade rom passed verification and then fails to install in the recovery after about 30 seconds. In the recovery itself I am missing Install from storage option.
I do not know what else I can do. Please help me!