here's what else I've done to resolve my issue (as seen on XDA): Hoping someone on this thread may have other suggestions.
-Boot into recovery and randomly pressing back and menu button for a few
(worked for the next little while)
-*#*#2663#*#* and update TP Firmware and tried updating both too
(again, it worked for the next little while)
Now it seems to be worse. It just doesn't work at all. Reboot, battery pull and retrying the above now doesn't work.
Went from a Stock 2.3.3 (rooted) ROM and tried Lite'ning ROM. Of course, factory reset after flashing custom ROM but that also would make it work for the next little while too.
Any suggestions??
^bump
anyone else have this problem? I just flashed back the Stock kernel and firmware that is for Three UK and factory reset. Same problem.
I guess no one else has experienced this issue...I got me a lemon.
I spoke with Samsung and they'll be fixing it for me under manufacturer's warranty.
Ok so I have an sgs2 on Vodafone uk running BUKJ3 (vod) CSC
I woke up this morning to find that my soft menu key is not responding (the back key still works though)
I have tried a factory reset/cache/davlik wipe etc also tried re-flashing my rom but sadly still no response.
I have tried searching but came up with nothing that is relevent or that worked.
Asking u guys for help as I really don't want to take it in for repair unless completely neccessary as apart from this and losing my IMEI number once this phone is my baby and has treated me well with no other problems.
So does anyone have any suggestions or advice please?
Or do I buy a jig and return to Sammy and hope it doesn't come back to me with numerous problems which I don't have now.
Good evening all, my apologies in advance if i am asking a stupid or already answered question,
i have looked through this forum and many others along side through google and i am unable to find a solution or solved post in regards to fixing this phone.
I recently purchased a second hand s2 from ebay, not the best move but it was cheap, and i was in need of a phone.
the phone came with damaged screen, so i ordered a replacement and thought no more.
after receiving the screen i replaced it fitted it and was in the belief that the phone would be up and running, no no no this is not the case...
upon fitting the screen i found that the phone would lag as such, as if two fingers were placed on the screen, with motions being very sticky also requiring a large amount of force to respond when trying to use it. normal androids will switch between home screens effortlessly and relatively fluid.
Seeing this issue i thought a simple firmware upgrade would suffice and id have a usable phone. upon upgrading via kies i was unable to install the MTP drivers and so switched to the program odin for the update.
i downloaded what i believe to be uk firmware from samsung-updates,
firmware I9100XWMS2_I9100BULS3_I9100VODLSF_HOME
which has also caused the phone to boot in what looks to be spanish. although e3 and cwm show in english.
after the update the phone seems to be in a soft bricked state, the phone will repsond to input from soft keys, go into recovery and download mode accept all firmwares i have tried 9 times out of 10. but when reaching the android home screen is completely frozen, no response from touch or soft keys, except only for volume up and power to reset the device.
thinking the recently purchased LCD was the culprit i have sent it back and had a replacement, still the issue is present.
I have tried many different roms/kernels in the hope to solve this problem and i am at my wits end!
any help in bringing this thing back to life would be of great help as i am without a phone, or enough money to replace it again...
thanks for any response
cheers Ansell2k12
Hopper8's 'Odin troubleshooting' thread stickied in the General section; in particular flashing the 3 part firmware (this will wipe your phone). Also try everything in that thread for as long as you have the patience for it. These cases tend to be fixed by perseverance, or not at all. There's no easy fix. It's either a hardware issue(s), NAND corruption, or something really obvious being missed here. If it's the latter, hopefully the stuff in Hopper's thread helps you fix it. If it's either of the other two, I'd be cutting my losses.
Ansell2k12 said:
Good evening all, my apologies in advance if i am asking a stupid or already answered question,
i have looked through this forum and many others along side through google and i am unable to find a solution or solved post in regards to fixing this phone.
I recently purchased a second hand s2 from ebay, not the best move but it was cheap, and i was in need of a phone.
the phone came with damaged screen, so i ordered a replacement and thought no more.
after receiving the screen i replaced it fitted it and was in the belief that the phone would be up and running, no no no this is not the case...
upon fitting the screen i found that the phone would lag as such, as if two fingers were placed on the screen, with motions being very sticky also requiring a large amount of force to respond when trying to use it. normal androids will switch between home screens effortlessly and relatively fluid.
Seeing this issue i thought a simple firmware upgrade would suffice and id have a usable phone. upon upgrading via kies i was unable to install the MTP drivers and so switched to the program odin for the update.
i downloaded what i believe to be uk firmware from samsung-updates,
firmware I9100XWMS2_I9100BULS3_I9100VODLSF_HOME
which has also caused the phone to boot in what looks to be spanish. although e3 and cwm show in english.
after the update the phone seems to be in a soft bricked state, the phone will repsond to input from soft keys, go into recovery and download mode accept all firmwares i have tried 9 times out of 10. but when reaching the android home screen is completely frozen, no response from touch or soft keys, except only for volume up and power to reset the device.
thinking the recently purchased LCD was the culprit i have sent it back and had a replacement, still the issue is present.
I have tried many different roms/kernels in the hope to solve this problem and i am at my wits end!
any help in bringing this thing back to life would be of great help as i am without a phone, or enough money to replace it again...
thanks for any response
cheers Ansell2k12
Click to expand...
Click to collapse
lcd may be the culprit but also the firmware is crashed flash it again properly after a factory reset from e3
Progress...but not as id hoped...
first off thanks to you mistahbungle & bhavstech,
unfortunately im only little further forward.
After the flash using 3 part file firmware the phone is now running in English language on an updated firmware, but still appears to be frozen/ crashed.
updates on appearance, maybe its still salvageable?
Clock now updates after reboot
English language
charge icon does not change when unplugging/replugging charger/data cable but is recognized by the PC - MTP is now installing, but requires reboot, after reboot of the PC, MTP installs again and request reboot again... and continues to do so.
clock doesn't update at home screen, again appears to be frozen/crashed
still no response to touch, touch buttons or soft keys - only phone rest volume up and power.
when phone is at samsung splash screen i get notification of voice mails/texts on the phone.
Thanks again Ansell2k12
Ansell2k12 said:
first off thanks to you mistahbungle & bhavstech,
unfortunately im only little further forward.
After the flash using 3 part file firmware the phone is now running in English language on an updated firmware, but still appears to be frozen/ crashed.
updates on appearance, maybe its still salvageable?
Clock now updates after reboot
English language
charge icon does not change when unplugging/replugging charger/data cable but is recognized by the PC - MTP is now installing, but requires reboot, after reboot of the PC, MTP installs again and request reboot again... and continues to do so.
clock doesn't update at home screen, again appears to be frozen/crashed
still no response to touch, touch buttons or soft keys - only phone rest volume up and power.
when phone is at samsung splash screen i get notification of voice mails/texts on the phone.
Thanks again Ansell2k12
Click to expand...
Click to collapse
Your issue of a semi frozen state is very familiar to me but the reasons can be many and one of those are the /sdcard partition not mounting properly and likewise it could also be a failure of the other major partitions but if the device booted and made it to the lockscreen then you may have some hope, first if you have a external card plugged try booting without it, if the issues repeat try swapping the ext card with the internal /sdcard by flashing a modified vold.fstab file for your firmware which swaps the partitions effectively making the device mount the ext card as the /sdcard partition. I am expecting you have gone through the default troubleshooting methods like a clean flash etc.
Sent from my GT-I9100 using Tapatalk
king_below_my_lord said:
Your issue of a semi frozen state is very familiar to me but the reasons can be many and one of those are the /sdcard partition not mounting properly and likewise it could also be a failure of the other major partitions but if the device booted and made it to the lockscreen then you may have some hope, first if you have a external card plugged try booting without it, if the issues repeat try swapping the ext card with the internal /sdcard by flashing a modified vold.fstab file for your firmware which swaps the partitions effectively making the device mount the ext card as the /sdcard partition. I am expecting you have gone through the default troubleshooting methods like a clean flash etc.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Yes i have done multiple flashes, tried another sd card as the original was unreadable by the phone but picked up the second faultlessly, although flashing a custom firmware failed when trying to load in cwm.
as for a modified vold.fstab file,this is new to me. Could i ask how its modified or where i would get the file? im guessing id use odin to flash it to the device?
thanks for the response
Ansell2k12
Ansell2k12 said:
Yes i have done multiple flashes, tried another sd card as the original was unreadable by the phone but picked up the second faultlessly, although flashing a custom firmware failed when trying to load in cwm.
as for a modified vold.fstab file,this is new to me. Could i ask how its modified or where i would get the file? im guessing id use odin to flash it to the device?
thanks for the response
Ansell2k12
Click to expand...
Click to collapse
There are some threads in which I myself detailed about swapping memory its done via a custom recovery and not using Odin.
Sent from my GT-I9100 using Tapatalk
??
king_below_my_lord said:
There are some threads in which I myself detailed about swapping memory its done via a custom recovery and not using Odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
any chance you could point n the right direction?
i have had a look at the stuff to edit vold, and it seems i am unable to do so as my phone isnt usable once booted
cheers Ansell2k12
Phone has gone in the bin cheers guys, thanks for the help
....
You could easily flash a edited vold.fstab file by generating a flashable zip file. That's why I said via recovery or if you are clever enough you can easily use recovery flashable Aroma file manager to overwrite the file.
Sent from my GT-I9100 using Tapatalk
Hello Xda community,
Alright after exhausting all other options i have decided to turn to our community in hopes that i can come to some sort of resolution for this matter. Okay i own a Sophix Tab-840g past warranty my problem is my software was causing freeze and reboots i left it that way for a while because it wasn't bothering me. So i waited long enough for them to make a new firmware and i upgraded, however upon doing so i was not able to use the touchscreen. Also, i have no back up...... was a bad move in retrospect. I did some research and found that that the freezing was due to the actual firmware and many people had tried to update running into the same situation where the touchscreen stopped working.
The only difference between when i did it and when they did it is the company had there older firmware available still. That is no longer that case they only have the new firmware and after calling they no longer have old software available. Other people reverted back and atleast there tablet worked, however I CANNOT get the old firmware ANYWHERE........in there guide they talk of the use of update "update-tab840-v02-20130315.img" when using there batch program. The only firmware available is the new one “upgrade-tab840-v03-20130607" i'm looking for the older update "update-tab840-v02-20130315.img" to fix my tablet or a way to fix this touchscreen hard reset is out of the option i have already done this method a couple times, i tried installing from sd, and from the computer all with the same error. Thank you so much for reading this and also for any help i procure. I will be uploading the version of my firmware i have no and the old one if i get it so this can the fix for this dreaded problem with so few forums talking of a fix.
Thank you,
Captainsploof
P.S. having trouble uploading firmware at this point keeps saying page unavailable during upload 8/18/2014
Experts,
After 2 days of searching, I could not find a solution to my specific problem. If I missed it, please accept my apologies, and send me the link to the existing thread.
My Samsung Galaxy SIII (i9300) has been playing up. I did a factory reset 4 times during the last 2 months. Two days ago, it started by itself. Then, I could not get into factory reset, anymore. Whenever I start it, the screen is full of some white pattern (no readable text). I can get into the download mode (Volume Down, Power, Home buttons), though.
I thought of downloading a new firmware. I tried using ODIN 3.10, with no luck. I got a message complaining about the PIT file (sorry, forgot the exact message), although I was not using one. Then, I tried to use some PIT files, none of them helped
I tried Heimdall ver 1.4.0. I fiddled around many times, until I figured out that the firmware files in samMobile.com cannot be used as is by Heimdall. I had to unzip them, and get a PIT file. By the time, I got this far, my mobile won't respond in any way or form. Did I use all of the battery charge doing the above? Does it need to be "working" for battery charging to work?
1. Do I need a charged battery to resume my trials to fix it, or it now became hard bricked :crying:?
2. Is there a way to tell for sure if an i9300 is hard bricked?
3. On another note, and with the assumption that it is NOT hard bricked and that a charged battery would help, I suppose the use of a JIG dongle won't be any different than using ODIN/Heimdall. Right?
Thank you very much for your effort and time in trying to help me.
Try another battery first, usb jig can force download mode.
The white pattern sounds like emmc corruption or failure, go read the dead boot restore thread in general forum.