My Amazfit Pace smart watch is not updated, now it ROM version 1.3.0n , and have 13 watch faces, but since buy tit when i connected the app thee show update 1.3.1/1.3.2/1.3.4/1.3.5/ now it showing 1.3.6d but when i press to update and it showing on watch updation after little bit it show eorr and further little more when is run the watch get a message successfully updated. but after little time again require update. i don't know what can i do?
also not upload custom watchfaces. will be very helpful pls suggest? how can will be updated. :crying::crying::crying::crying:
You need a steady WiFi connection to download and upgrade ROM, it only works with 2.4GHz WiFi. Try another connection or get closer to the router. If it still fails, you may want to factory reset the watch, pair with Amazfit app and try again. If it still doesn't work, do the same with a new account on Amazfit app.
Related
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
montarelonf said:
I have an Amazfit Bip clock and it has blocked in "Activity" page.
The touch screen does not respond, the physical side button either, the Mi Fit fails to connect, ...
The clock continuously displays that "Activity" menu screen and you can not interact with it.
How can I reset it or what should I do to use the watch?
I use Mi Fit 3.0.5, FW-0.9.14
Thanks
Click to expand...
Click to collapse
Yes, it happens when BIP trying updating A-GPS data. Run MiFit, keep watch close phone and let him update. Sometimes is failed, but close MiFit, clear memory and try again until success.
Thanks a lot.
In fact, it must be something related to what you say, becasuse as soon as the clock was recovered and connected again to the Mi Fit, it began to update the A-GPS.
What I do not know is if the solution you proposed works, because while it was blocked, the Mi Fit did not recognize it (it always put Connecting ...), it did not connect and I mismatched it and then I could not find it to link it again. That is, there was no bluetooth connection between My Fit and Clock, so I do not know how I could have updated the A-GPS clock trough the Mi Fit
Fortunately, the clock went off and when I put it to charge it started well and it works.
Hi there,
since today i have got the same problem. Sadly the battery is charged 100% so waiting for discharge may take some time. Does somebody know how to reset or force reboot or force discharge the watch?
Thanks in advance!
Amazfit bip problem
Hi, i got exactly the same problem with you..
After i switched my smartphone (from huawei P9 to LG V20) My amazfit Bip suddenly updating A GPS and after that, the touch display is hardly responding, then when i long press the button, it start to displays workout session that cannot be stopped or interrupted in the meantime, Mi Fit can not sync/interract during workout session).
After spent several frustating days, finally i conclude that the main issue is the firmware.
So here is what i did :
- Let the Amazfit watch battery drain (since the activity/workout session can not be stopped, it will drain faster than ussual).
- Recharge the watch until more than 10% and re-connect it to Mi Fit app. (Don't charge it too long, because when something goes wrong you will have to take time to drain the battery again).
- Download NOTIFY & FITNESS FOR AMAZFIT" app from google playstore and connect your Amazfit with the app.
- When the Amazfit Bip paired to Notify & Fitness For Amazfit,
unpaired the watch from the Mi Fit App, then uninstall Mi Fit from your phone.
- Now you have only 'Notify & Fitness for Amazfit' app connected to your amazfit bip.
.- Go to setting section in the app, scroll down and you will find firmware update section, then update the amazfit firmware (you will find some option : english/spain/italian etc., i've choosen english version)
- There imare 3 items that you have to sequintly update one by one : firmware, recources and gps (i failed to update the gps, but all i know, it doesn't matter anyway...)
- After the update finished (sometimes it failed, but i repeat it on and on untill it's succeed), my amazfit starts to work proper and not displaying work out session anymore.
Notify & Fitness for Amazfit is my saviour!
It works better than the official Mi Fit app.
Blocked after Workout
I also had a blocked Amazfit Bip:
On my first workout (a 3 hour bicyle ride), I wanted to stop it. Unfortunately the watch always restarted the workout again.
First I thought that I had double tapped the screen after pressing the Ok (to finish) button. But I tried this for at least 30 times. It always restartet the workout.
I still got a connection from the Mi Fit App, but it told me that the watch is within a workout.
I disconnected / reconnected the MiFit App several times and somehow I was able to quit the Workout.
I immediately switched off the watch, restarted and everything was fine again. No new firmware flashing was required.
I only have it since two days.
[Firmware 0.1.0.26]
Hello,
Two days ago, I completed a bicycle ride of 43.37 km, while recording the activity with my Amazfit Stratos. Today, I connected to the Amazfit Watch app in my phone to sync my activities (Normally, I have my Stratos in Airplane mode in order to save battery and connect to my phone once every two or three days). To my surprise, this one (made on 2018-08-27) was not shown in my activities page in the Amazfit Watch app. I have to note, that another short ride that I made the day after (on 2018-08-28) of 10.09 km is shown in the app. Also, this discrepancy appears on the total mileage (in the app) versus the sports history (on the watch) readings (the former shows 662, 85 km, while the latter shows 706,07 km). Of course, the 43.37 km ride is shown on my Stratos.
I tried a few things to bring this activity to the cloud, like closing and reopening the Amazfit Watch app, rebooting the watch, but nothing helped.
I must also note that, while connecting today, the watch updated to the latest version. I don't know if that had an effect on syncing.
Does anyone have any suspicion on why is this happening and how can I correct this?
I have also submitted a question to Amazfit support page and I am waiting for their response.
Thank you,
Evangelos
Hi,
I have the same issue. The activity and sleep info are not displayed in Amazfit Stratos since I have updated the device the last weekend.
Do you have received any answer from Amazfit support?.
Thanks.
iscario said:
Hi,
I have the same issue. The activity and sleep info are not displayed in Amazfit Stratos since I have updated the device the last weekend.
Do you have received any answer from Amazfit support?.
Thanks.
Click to expand...
Click to collapse
I received the following reply from Amazfit support:
"Please go to your phone Bluetooth settings to cache Bluetooth cache, toggle Bluetooth OFF and ON, reboot the watch and phone, log out and then re-open app and try connecting again.
If your issue persists, please connect wifi on the watch and go to more settings---upload. Tap upload on the watch to upload data to Amazfit Watch app and open your app to sync. Then unpair the device from your phone and re-pair it to have a try."
I tried the first method, but it didn't work. Then, I proceeded to the second method of manual uploading data, which remedied the problem. I suspect that it is not necessary to unpair and re-pair the watch - I think that a log-out and log-in will do the job. If you follow this technique, after uploading data, try to log-out and log-in again and check your activity in the app to see if everything is back. If not, then go for a unpair-re-pair process.
Hope this helped.
keneva said:
I received the following reply from Amazfit support:
"Please go to your phone Bluetooth settings to cache Bluetooth cache, toggle Bluetooth OFF and ON, reboot the watch and phone, log out and then re-open app and try connecting again.
If your issue persists, please connect wifi on the watch and go to more settings---upload. Tap upload on the watch to upload data to Amazfit Watch app and open your app to sync. Then unpair the device from your phone and re-pair it to have a try."
I tried the first method, but it didn't work. Then, I proceeded to the second method of manual uploading data, which remedied the problem. I suspect that it is not necessary to unpair and re-pair the watch - I think that a log-out and log-in will do the job. If you follow this technique, after uploading data, try to log-out and log-in again and check your activity in the app to see if everything is back. If not, then go for a unpair-re-pair process.
Hope this helped.
Click to expand...
Click to collapse
Solved after uninstalling Amazfit app 2 times and clean cache.
Thank you very much for your help.
Hi buddies.
Yesterday I see my Verge not sync completely with the Amazfit App (Android). The app say that some data not is possible to sync. In the same day, a OTA update is appear in the app, and in a few hours later I update the watch but the problem persist. Today I try to unpair the watch from the app but then not is possible to pair again, when the watch appear the Bluetooth code and press OK, the watch restart again in the QR code. I try to login in the Amazfit app with another account and nothing.
Anybody with the same problem?? The watch not be able to use in this state.
I have managed to pair it, but the problem of incomplete synchronization with the app persists...
Hi,
Every once in a while I get the message 'connection failed, update to the latest app to synchronize data'. I click the message away and I get back to my watchface, only my screen stays always on after getting this message. I always have to reboot...
I did already a factory reset, but didn't helped. I have a custom watchface, could that be the problem ? Or is it something else ? Anybody ?
Does it happen when you have default watch face?
iyengar said:
Does it happen when you have default watch face?
Click to expand...
Click to collapse
That I have to test...but don't want to have the standard facewatch anyway...
I did test it. Have occasionally the message on all tried watchfaces...I use the zepp app in combination with notify and fitness. Any one a solution ?
Maybe downgrade firmware and then update again to latest firmware? This sometimes fixes bugs..
I have the exact same problem with the Amazfit GTS . I have the same combination (Zepp app + Notify and fitness) and every few hours (or even more frequently) I get the same message and the screen stays on until I notice. Even if I press the screen for the message to go away the screen stays on until I also press the physical button.
Also besides that, the battery drain is awful. I used to get around 20-22 days of battery (with Amazfit app and Notify and fitness and everything enabled, even continuous heart rate) and now with the exact same settings i 5-6 days.. I can only get 1 day more if I disable things.
Problems started back in late August, early September when the Amazfit app changed to Zepp app but I am not sure if this is a fault of Zepp app or a problem between notify and fitness and the new Zepp app.
I have tried to do a factory reset to the watch, to delete zepp app and add it again etc etc but nothing changed. I have the default watchface and never used a custom one.
If someone finds a solution please inform us.
Just curious if anyone found a solution. I am having the same problem with connection failed, update to the latest version and I am on the latest version of notify app. Please help, thanks.
Without notify installed I have no problem.
By the way.....
I am on Android 11 with OnePlus nord
Hello all, I updated my iPhone to iOS 16 beta and my notifications are not working at all. I know there was a fix coming as an update for the Zepp app which I did (7.1.5) but I am still not able to get anything from my phone into my watch. Notifications, calls, nothing at all. I tried submitting a ticket to support but got no response.
Any help is appreciated, thanks.
Exactly the same problem here. iOS 16 (not beta) and Zepp 7.1.5 (was on Zepp 7.0.3 and it was the same). I have an old Bip in my desk drawer that I tried to activate instead of my Bip S Lite and it actually did receive notifications, until it very soon didn't anymore.
It also seems the watch disconnects itself from Bluetooth from time to time and won't reconnect until I open the Zepp app and do a sync.
I have a watch face that indicates if BT is connected or not, so that's how I know when it's disconnected.
So same problem on both Bip and Bip S Lite. And it seems those aren't the only models affected. There are reports coming from here and there.
Don MC said:
Exactly the same problem here. iOS 16 and Zepp 7.1.5 (was on Zepp 7.0.3 and it was the same). I have an old Bip in my desk drawer that I tried to activate instead of my Bip S Lite and it actually did receive notifications, until it very soon didn't anymore.
It also seems the watch disconnects itself from Bluetooth from time to time and won't reconnect until I open the Zepp app and do a sync.
So same problem on both Bip and Bip S Lite. And it seems those aren't the only models affected. There are reports coming from here and there.
Click to expand...
Click to collapse
Same thing is happening with the Bluetooth too. It gets disconnected and it does not reconnect at all.
Yeah I have seen reports from other watch users and some of them have already been able to fix it but I have tried everything so far with no success.
I have also tried factory resetting the watch(es), forgetting the Bluetooth bindings and uninstalling/reinstalling the Zepp app many times, but to no avail.
EDIT: Have now submiitted 3 reports via the Feedback function in the app. Each one more detailed than the previous.
The latest one:
Watch not receiving notifications and constantly disconnecting from BT.
iOS16, Zepp 7.0.3 and 7.1.5
-Problems started with iOS 16, I think.
-Notifications for Phone calls, WhatsApp, Gmail and SMS. None of them work.
-Watch keeps disconnecting from BT and will not reconnect until I open the Zepp app and do a sync.
-Will not reconnect BT automatically after being out of range.
-I have tried every setting in the App itself and in the phone's settings.
-I tried my old Bip watch and it did show a notification, but only once. Then it too stopped receiving them.
-I have factory resetted both watches many times and uninstalled/reinstalled the Zepp app a couple of times.
-Have made the phone forget the Bluetooth binding many times.
Don MC said:
I have also tried factory resetting the watch(es), forgetting the Bluetooth bindings and uninstalling/reinstalling the Zepp app many times, but to no avail.
EDIT: Have now submiitted 3 reports via the Feedback function in the app. Each one more detailed than the previous.
The latest one:
Watch not receiving notifications and constantly disconnecting from BT.
iOS16, Zepp 7.0.3 and 7.1.5
-Problems started with iOS 16, I think.
-Notifications for Phone calls, WhatsApp, Gmail and SMS. None of them work.
-Watch keeps disconnecting from BT and will not reconnect until I open the Zepp app and do a sync.
-Will not reconnect BT automatically after being out of range.
-I have tried every setting in the App itself and in the phone's settings.
-I tried my old Bip watch and it did show a notification, but only once. Then it too stopped receiving them.
-I have factory resetted both watches many times and uninstalled/reinstalled the Zepp app a couple of times.
-Have made the phone forget the Bluetooth binding many times.
Click to expand...
Click to collapse
I have also done all that and nothing has worked.
Mine started on iOS 16 beta before 16.1 like the update before it and it broke. First time I updated to the beta it was working fine but then the one right before 16.1 that’s where everything started.
Got an update to the Zepp app on my iPhone yesterday (v. 7.1.6) but it doesn't seem to have made any difference. Still no notifications.
I'm beginning to think the problems have something to do with how iOS16 handles Bluetooth connections. The bug is either in iOS16 or in the watch Firmware (although other Amazfit models are affected too).
I base my asumptions on the fact that the watch has trouble reconnecting to BT after being out of range or after it's been restarted. If I restart the phone, however, the watch usually gets connected.
So if it is the phone that initiates the connection, it usually works. But if the watch itself tries to connect, then it doesn't work.
But then again, the notifications do not work even if I keep the Bluetooth window open on my phone and the watch is 100% connected when a message arrives. Strange.
There is also something weird when I make the iPhone forget the BT pairing to the watch. It usually immediately rediscovers the watch and tries to pair again. This happens even if the watch is set to NOT be discoverable.
Just got another Zepp update in the App Store. 7.1.7.
Still no cigar.
There will be no more Huami watches in this household.
Don MC said:
I'm beginning to think the problems have something to do with how iOS16 handles Bluetooth connections. The bug is either in iOS16 or in the watch Firmware (although other Amazfit models are affected too).
I base my asumptions on the fact that the watch has trouble reconnecting to BT after being out of range or after it's been restarted. If I restart the phone, however, the watch usually gets connected.
So if it is the phone that initiates the connection, it usually works. But if the watch itself tries to connect, then it doesn't work.
But then again, the notifications do not work even if I keep the Bluetooth window open on my phone and the watch is 100% connected when a message arrives. Strange.
There is also something weird when I make the iPhone forget the BT pairing to the watch. It usually immediately rediscovers the watch and tries to pair again. This happens even if the watch is set to NOT be discoverable.
Click to expand...
Click to collapse
My apologies for my absence, I am not getting any notifications and honestly lost hope on this. I understand that this is something that might take time but 3 updates later, no real resolution or acknowledgment of what is actually happening.
I also believe that this issue has to do with the connection that the app has with the iOS16 beta since it started after an update. I got beta going, and everything was going smoothly, received an update and everything went south after that with no success or real connection whatsoever.
I just updated the app to 7.1.7 as you did and still the same, the only difference is that it seems the connection is more stable as it has not been disconnected yet and still shows connected without any issues.
I have not encountered the situation you are experiencing in that even if you unpair the watch the phone forces the connection again.
Indeed, I think this will be my last Huami watch. My wife is dying to update to iOS16 but I have warned her multiple times not to since it will break the connection.
Right now I just feel I have a regular watch that I have to charge in order to see the time...
It’s not the iOS beta. I was on the official 16.0 to 16.0.2 and the problem was there. Jumped on the 16.1 beta to try to solve it, but no luck there either.
Threw my Amazfit in my desk drawer and bought myself a Withings Scanwatch.
I finally am able to receive my iMessages on my Amazfit GTR4. On the Notifications in iPhone, go to Messages, and make sure in the Lock Screen Appearance-->Show Previews-> When Unlocked. Mine had changed to Never, as soon as I changed that and synced the Zepp app, now my messages are going through to my watch! Just thought I'd share what worked for me.
Seems that the Zepp app version 7.2.1 has fixed the notifications on my watch. They took their time, I might say.
...aaand then I updated my phone to iOS 16.1.1 and the watch (Bip S Lite) stopped notifying again.
EDIT: My Amazfit Bip on the other hand seems to be notifying just fine. Think I'll be using that one for now.
It definitely seems like the Bluetooth on my Bip S Lite is broken somehow. It won't automatically reconnect after it's been out of range/disconnected. I have to manually open the app to connect it again. And still no notifications.
I've contacted both the seller of the watch and Amazfit. Let's see if they have anything to say about it. I'm using the old Bip for now.
Dusted off my old Bip S Lite and paired it to my phone (or rather reactivated it, since I never did unpair it). To my surprise, it updated its firmware (to 2.1.1.86). Will try it and see if the notification issue is gone.