Hello.
I am using Honor 7 PLK-L01 (C432B330)
I'm having a problem at sdcard
** 1. The machine does not receive Sdcard, USP-OTG
** 2.When entering TWRP mode, both USP-OTG and Sdcard are recognized and corrected while in TWRP.
** 3. When I put my sdcard through another Smartphone, my Sdcard is still usable.
** 4. My Sdcard when running on PC is still stable.
** 5. I tried to get a second sdcard different from the first one and race on Honor 7 then it did not recognize the second sdcard.
Please fix the problem as above
Related
Hi, I'm looking for original recovery image for folio so i can return my folio for warranty repair due to the "damaged internal storage" and SD card not detected problem. Other people have that problem but no one got a solution.
There was only one link from dexter
but it does not work for me (maybe due to sd card not correctly detected? sd card can be detected for some other mod though). Also when i open the zip file i notice the files types and location in the "folio stock image" is different from the mod that works on my folio.
Someone seems to have a Folio Original Recovery(apply via recovery).....how to do that actually?
Can it be fixed by fastboot (never done this and not sure what it is about actually) as done here http://forum.xda-developers.com/showthread.php?t=1012980#12482544
http://bb2k.org/folio100wiki/index.php/FolioMod_Issues#Internal_storage_give_problems_.2F_no_enough_space_.2F_internal_storage_results_damaged
If you have sd damage or something like that it must be the mbr .At the end of lost partition method 2 , use this file mbr.mbr inside zip http://www.box.net/shared/suinl2fzqb63jkqaispj with adb
Hope this can help you but you need to install sdk and adb shell on you computer with the correct folio driver to connect your tablet in fastboot
Warning if you re not sure of what you do you should not do this but if it "bricked" it Will not be worst
if you are with Windows seven sometimes it s hard to install proper driver for folio try to use pdanet to do that if you still have waiting for device in adb shell
The whole adventure or rather misadventure began when I rooted my huawei ideos s7 tablet.
It went well after several tries with various tools starting from universal root, z4root and ginger break, last one being successfull.
The I started installing variety of those softwares from titanium to what not, and tried to save the rom which ended up in rebooting the device.But to my shock the device wont boot. It would start booting and then repeat the same screen logo again and again. Yes!!!!my poor tablet have been bricked.
But this post is on how to unbrick in such cases which I have just done.
1. take out the battery, sim card, sd card and unplug from any power source. (make sure battery has sufficient charge)
2. format the sd card to a fat system in a computer ( not android) using a sdcard adapter
3. download the dload. rar file from this link
http://www.mediafire.com/?9l52jhbl7b09czp
4.unrar using winrar/ 7zip and make sure the folder is dload with three files .cfg, .app, .log
5. now copy the folder to the formated sdcard
6. now insert the card into battery less tablet and then replace battery and power supply if needed
7. then a bar appears and update process starts. wait till bar gets full and OK appears
8. then remove battery and repeat 6 and 7 again
9. now remove the battery and then the sd card
10. reapply the battery and start the tablet
that is it.
we have the updated 2.2.2 Rom
This update has been confirmed to work with:
S7-103, Indonesian version with dual cameras internal/external sdcard
S7-104, US BestBuy/RadioShack version with dual cameras and internal/external sdcard
S7-105, Australian version with dual cameras and external sdcard
Unfortunately i deleted EVERYTHING in my p8 max.. there are NO DATA and NO SYSTEM files.
There's only the mate s recovery that works.
I tried to flash a zip with the stock firmware inside but the recovery showed me "unable to mount '\system' " and "Zip file is corrupt!" in red.
In addiction, my pc can't even recognize my p8 max, but it shows a connected device called "CRR - L09" that is my phone.
It is shown as an MTP device because I DIDN'T ENABLE THE USB DEBUGGING on my phone.
Is has a folder "internal storage" in which i put my zip with the stock firmware to flash(i said it didn't work) and other 2 sub-folders that are "TWRP" and "obb". Just these two.
My HiSuite(the huawei tool) can't recognize of course my device
_____________________________________________________
bootloader unlocked
twrp installed and working
root
my pc sees just an mtp device (CRR - L09)
device EMPTY with just an internal storage with other 2 folders (twrp,obb)
_____________________________________________________
I'M SO FRUSTRATED, IF IT'S POSSIBLE I'D LIKE TO HAVE MY PHONE BACK PLEASE :crying::crying:
Please someone help me. I flashed the OOS 3.1.1 community build through twrp. Now I formatted my samsung 32 gb sd card as internal memory in adoptive storage, but when I try to migrate data it says "not enough storage space".
tomriddle25 said:
Please someone help me. I flashed the OOS 3.1.1 community build through twrp. Now I formatted my samsung 32 gb sd card as internal memory in adoptive storage, but when I try to migrate data it says "not enough storage space".
Click to expand...
Click to collapse
Try moving individual apps
Is this the same ota that oneplus is sending to our devices?
Wait, so you defined the SD card as internal memory, and you're trying to migrate the data from internal to sd?
I have the exact same problem. I installed OxygenOS 3 and have the latest OTA update.
I enabled the adoptable storage (can't post links yet) but I can't see my sd card on my pc, when the phone is connected. It shows up in my phone without any problems.
I tried to reformat my SD into portable storage than into internal again but I always receive the "not enough storage message" whenever I try to migrate data.
Quoting from this thread on the Oneplus Forums: https://forums.oneplus.net/threads/use-sd-card-as-internal-storage-cant-also-with-6-0.460967/
this appears to be the answer.
1. activate USB Debugging on Developer Options
2. download adb tools here and put it in one folder.
3. plug your phone to pc via USB
4. now open windows explorer and "shift + right click" at adb folder, then sellect "open command window here"
5. type "adb shell sm set-force-adoptable true" (without quote) and then press enter
6. unplug your phone and go to setting>storage&usb>SD Card
7. click 3 dot on top right corner>setting>format as internal
All credit for this response goes to: https://forums.oneplus.net/members/alfred-albert.860990/
Yeap, those were my exact steps. Actually my SD working is working pretty good in the phone, with all the new apps being correctly installed into it.
Deep down, what is really upsetting me, is that I can't see the SD card on my Windows Explorer when I connect the phone to my PC (and yes, I tried it on different computers as well). I really like to use it as a portable storage device
Before OxygenOS 3 I was using CyanogenMod and this was working as expected.
Do you have a clue what could be going on?
Dear friends and ring leaders, I removed my OS (Paranoid Android 6) without doing a backup. Now my phone has no OS and I think since i didn't authorize USB debugging, my device comes as unauthorized in ADB. How do i authorize my device without an operating system.
- I have TWRP 2.8.7 installed.
- I am able to connect the device through USB - both the internal memory and SD card show up.
- Problem with my phone USB port so cannot use USB OTG
- Able to copy to the SD card however, copying to Internal memory stops half way each time..
- Trying to install through SD card fails each time - While the device is mounted and i can access it via TWRP - exits with the message unable to mount.
- HELP!! Using a nokia 150 as my daily driver
Disclaimer - I have been a novice at using custom roms and have limited success installing them on multiple phones. Successes - PA 6 on onyx and CM 13 on Moto G 2013.
I appreciate your patience if this post has already been covered. I tried searching through google search on XDA but was unable to find something similar.