Hi everyone, I need your help.
A couple of days ago one of the ear peaces of the original Leeco headphones died because of wear and tear to the cable. I quickly opened amazon and found "Huawei 55030088 Headphones Type C, White" which seemed good enough for my needs. Sadly when I opened the box an hour ago and trying them nothing happened. It's like they are not even plugged in. The sound is coming from the speakers. I've tried several apps and rebooting as well and it didn't work. I am currently running DU v11.7.2 (7.1.2) with kernel Blackscreen 3.18.31. I was wondering if it's a compatibility issue.
Please help me unravel this mystery.
Best regards, Mysaka.
Heyyo, hmm it could need extra entries in audio files in order to work or it could require something else... By chance do you have a PC with a Type-C port? Please see if it works on there if yes otherwise maybe please try with a Type A to C adapter.
Otherwise? You could always attempt to revert to EUI ROM and see if it works there... If it does? Then we know there's definitely some kind of compatibility issue that will need to be resolved.
Unfortunately I don't have a USB c port on the PC or adaptor. Thanks for the idea, will try it this weekend and report the results.
Try this:
-plug the USB c adapter to the phone
-whait around 5-10 seconds
-unplug it than plug it upside down
This usually works for me and if it works for you than you need to do this every time.
Related
Hi All, hopefully im posting this in the right place. I've searched and cant find anything similar. Been a user here for a while, but first time posting a question, so please go easy on me! lol
I recently bought a USB OTG cable for my SGS2, and since then i've been plugging pretty much every USB device i have into it to see if it works or not, with varying degrees of success.
Tonight i had the thought of plugging my logitech Z305 usb speaker in and trying it out, and to my amazement it kind of works lol The volume buttons on the Z305 control the media volume on my phone, and i can hear the speakers are active, as there is dead air. When playing music, it plays through the phone speaker, but not through the Z305. I've read that some usb devices require more power, and may work through a powered hub.
I guess what im asking, is has anybody tried this, is there any possibility this might work? Thanks in advance!
A month later, im googling the same topic and find this thread lol
About 5 mins ago, i finally cracked this and got it to work with my iconia tablet, then tested it on my S2 and it works!
USB provides power, obviously, and by simply using a 3.5mm male to male cable, plugged into the device and into the Z305 and i now essentially have a portable stereo! Just thought i would share, considering all the interest i generated from my OP lol
Just received my awaited elephone p9000 today and had been using it for a couple of hours setting up, Doing an update etc. When i came time to charge it. To sum it up it used the supplied usb c cable to attempt to charge it on multiple usb chargers and tried it with two pc's with no success. When connected to the pc it did come up with 'This device has been linked" Then immediately followed by "this device has been unplugged" Or at least something along those lines. Today i went and purchased a micro usb to usb c adapter and managed to get it to charge momentarily then to find it stop then start again. I am now sitting on 1% power and not sure what todo. Any advice? I have warranty on it from gearbest fyi.
octan_3 said:
Just received my awaited elephone p9000 today and had been using it for a couple of hours setting up, Doing an update etc. When i came time to charge it. To sum it up it used the supplied usb c cable to attempt to charge it on multiple usb chargers and tried it with two pc's with no success. When connected to the pc it did come up with 'This device has been linked" Then immediately followed by "this device has been unplugged" Or at least something along those lines. Today i went and purchased a micro usb to usb c adapter and managed to get it to charge momentarily then to find it stop then start again. I am now sitting on 1% power and not sure what todo. Any advice? I have warranty on it from gearbest fyi.
Click to expand...
Click to collapse
When I first charged my P9000 it did not go over 50% until I updated to the newest OTA and rebooted the device after the last update.
But I have not encountered disconnects or anything like that.
You could also screw your device apart and remove the battery for some time, but as you have a valid warranty I would not recommend that.
Kooperativ said:
When I first charged my P9000 it did not go over 50% until I updated to the newest OTA and rebooted the device after the last update.
But I have not encountered disconnects or anything like that.
You could also screw your device apart and remove the battery for some time, but as you have a valid warranty I would not recommend that.
Click to expand...
Click to collapse
Thanks for the response. I wish i could get to 50% battery. Im currently trying to update to the newest OTA but its difficult.
octan_3 said:
Thanks for the response. I wish i could get to 50% battery. Im currently trying to update to the newest OTA but its difficult.
Click to expand...
Click to collapse
If you connect your phone to your PC, is it listed in the device manager? If yes, does your PC recognize it as Elephone p9000?
Have you installed the latest drivers for your phone? (http://bbs.elephone.hk/thread-1037-1-1.html#.VWgkX_RAU-0)
Maybe changing the connection type in the notifications (when plugged in) helps in any way ?
Have you tried a different lead? I know this sounds obvious but my brother had a similar problem with his P9000 when he first got it, he used my lead (for some reason my lead was different to his as I bought from a different supplier, dunno why mines a kinda thick white lead, my brothers was a kinda thinner blue Elephone lead) and it worked fine. Although I haven't come across anyone else on here that's come across an issue with the supplied lead.
Kooperativ said:
If you connect your phone to your PC, is it listed in the device manager? If yes, does your PC recognize it as Elephone p9000?
Have you installed the latest drivers for your phone?
Maybe changing the connection type in the notifications (when plugged in) helps in any way ?
Click to expand...
Click to collapse
It does multiple things when it connects at different stages
ON and connected to pc- With elephone cable the phone constantly displays the messages 'Charger has been linked' and 'device has been unplugged' within ~1 sec of each other and no connection is noticed on PC.
With the MICRO USB - USB C adapter nothing happens
Powered off and connected to pc- Charging symbol will flash momentarily every ~5seconds. Pc will ding repeatedly as it connects and disconnects
fastboot- Somehow connects and is recognised by PC
Ive managed to get it past 30% power but took ages todo from leaving it powered off and just flashing on and off charging
jotei66 said:
Have you tried a different lead? I know this sounds obvious but my brother had a similar problem with his P9000 when he first got it, he used my lead (for some reason my lead was different to his as I bought from a different supplier, dunno why mines a kinda thick white lead, my brothers was a kinda thinner blue Elephone lead) and it worked fine. Although I haven't come across anyone else on here that's come across an issue with the supplied lead.
Click to expand...
Click to collapse
I only have 2 leads unfortunately. The stock elephone and a micro usb to usb c adapter with a working micro usb attached. Ive ordered some more online and waiting their arrival. Im stuck on what todo
That is indeed very strange.
You could try to flash TWRP 3.0.2.1 via fastboot (http://en.miui.com/thread-58623-1-1.html, just use the TWRP for Elephone P9000 instead), but I would not recommend that as your connection is really unstable. The chance of bricking your device is much higher than the chance that your problem is solved.
If the leads you ordered do not help you should get it replaced.
Has anyone tried to connect Creative Sound Blaster E5 or Sound Blaster X G5 portable sound cards? It can be a very interesting result.
https://en.creative.com/p/sound-blaster/sound-blaster-e5
https://en.creative.com/p/headphones-headsets/sound-blasterx-g5
Sound blaster x G5 DOES work on some android devices
Skip to the end to avoid my long pre-amble. Refer to it if you run into issues using the provided steps though. I picked up a sound blaster x G5 on sale at Best Buy for like seventy bucks and was super stoked to hook it up to my moto G4. No dice and after some research and trying it with a powered otg adapter I abandoned the endeavour. Fast forward 4 months and I finally get around to replacing the broken digitizer on an lg gpad f 8.0 v495. Not the entire LCD mind you, just the broken glass digitizer. First attempt doing this on any device ever and it was every bit as hair raising as you might think. From what I understand this is a pretty obscure tablet but it's got great wifi reception and a full size USB port on top independent of the micro USB charging port on the bottom. I can't be certain but I think this is the key to getting the sound blaster x G5 to act as an external USB dac because by all accounts I have come across this should not work. The v495 runs lollipop 5.0.1 and is rooted. Again not sure if rooting is a crucial part of getting this DAC to run as an external USB dac. It was a hassle getting this tablet rooted and supersu installed. I think it was kingroot I originally used to root it but kingroot is crap imho and I wanted supersu on there which I managed to do after quite a bit of hassle. Apparently doing what I did to get supersu can brick your v495 as not a lot has been done with this tablet in the community as from what I gather it is pretty obscure but I'd be happy to help anyone trying to get supersu up and running. Anyhow what you need to do is get a powered USB hub that takes 5v 2amp external power and plug that into the full size USB port. For me I tried three USB 2.0 hubs with external power between one and two amps of external power, no dice on those ones. Ive tried two different USB 3.0 hubs both with 2 amp power plugged into wall socket or power inverter in a car and both worked, even the Walmart onn brand one meant for use with PS4. So far power banks have not worked and I've tried several. It doesn't always start putting out sound right away and I still don't have it 100% figured out, sometimes it takes some unplugging and plugging back in to get audio output from the G5 but once it's going it doesn't cut out and sounds really, really good at least compared to the fiio k1/a1 combo I was using prior though that is still a good combination especially for the price. I use this in my car with a Belkin rockstar 5-way splitter one line going to fiio a1 headphone amp to the aux jack for car stereo and the other line going directly to a Polk audio home theater subwoofer meant for home theater use plugged into a second power inverter. Odd setup? Yup. Cost effective and great sound? Yup. 3.5mm splitters in my experience are notorious for having the timing be off for different outputs and this has been a huge hassle, I've got several and out of two Belkin rockstars only one with two ports of five sync up evenly. Picked up a foil e07k which has two 3.5mm outputs to solve this but it hasn't arrived yet. Possible both line outs on the G5 may solve this too. I am continuing trying to work out the kinks in this setup to have the G5 start outputting the sound without a bunch of u plugging nonsense and just put picked up a high quality USB 3.0 powered hub and will post any further results I get. Here are the STEPS: 1- plug in power supply to USB 3.0 hub. 2- plug in USB 3.0 hub to full size USB port on top of tablet. 3- plug in a flash drive to USB 3.0 hub 4- plug in the G5 to USB 3.0 hub. If it lights up and stay lit with no flashing of the red X you should be in business. If you get no sound output start unplugging and plugging things back in at some point you should get audio output from the G5. Having the tablet charging simultaneously seems to help but isn't necessarily required. Same with having a flash drive plugged into the hub. You can also try having the flash drive plugged into the full size port on the G5, android will be able to access it in either case. Headphone amp on line out(s) from G5 may also help. I'll be updating after further testing. Also, it's a good idea to program some presets on the G5 by using the software provided for windows and Mac, I ran into bizarre sounding music the first time I got this working on the tablet because the WE settings were all over the place when it came to music. Took some trial and error by is easy to correct.
Try using the ENTER key occasionally.
Recently picked up the v30 and purchased an otg cable to be able to hook my printer to my phone for work (did this on my g4 no problem). First plug shows up and when i plug it in, the phones usb status goes to "power supply" (like im trying to charge another device, not charge my v30). If i changs it to any other option, a second later it changes back to power supply. I thought this was strange as nothing was even plugged into the otg cable. Returned it and got another one of a different brand , same problem. Got a specific cord thats usb c on one end, printer plug on the other side. Same exact thing. All of these cables worked fine on my buddies Motorola, so at this point, i can only assume its the phone. I have tried plugging multiple devices to the otg cables, even getting a usb to micro usb to try my old otg cable and all had the same problem. Verizon sent a brand new phone to me thinking my cable port was bad. It did the same thing as well. If anyone else has run into this issue or has any advice, that would be much appreciated. My work printer is old and the wifi direct sucks to hook up constantly and it likes to disconnect in the middle of printing.
Thanks,
Goat
OTG Issues
goatxxmastr said:
Recently picked up the v30 and purchased an otg cable to be able to hook my printer to my phone for work (did this on my g4 no problem). First plug shows up and when i plug it in, the phones usb status goes to "power supply" (like im trying to charge another device, not charge my v30). If i changs it to any other option, a second later it changes back to power supply. I thought this was strange as nothing was even plugged into the otg cable. Returned it and got another one of a different brand , same problem. Got a specific cord thats usb c on one end, printer plug on the other side. Same exact thing. All of these cables worked fine on my buddies Motorola, so at this point, i can only assume its the phone. I have tried plugging multiple devices to the otg cables, even getting a usb to micro usb to try my old otg cable and all had the same problem. Verizon sent a brand new phone to me thinking my cable port was bad. It did the same thing as well. If anyone else has run into this issue or has any advice, that would be much appreciated. My work printer is old and the wifi direct sucks to hook up constantly and it likes to disconnect in the middle of printing.
Thanks,
Goat
Click to expand...
Click to collapse
Hi,
I have been having the same issues. I am trying to use the OTG adapter for my Meridian DAC. Ordered through Amazon 2 times, with different sellers claiming compatibility. But no luck.
And to concur with you, I get the identical issue where it switches momentarily to my selection, then Immediately goes to Power supply.
mattmc1228 said:
Hi,
I have been having the same issues. I am trying to use the OTG adapter for my Meridian DAC. Ordered through Amazon 2 times, with different sellers claiming compatibility. But no luck.
And to concur with you, I get the identical issue where it switches momentarily to my selection, then Immediately goes to Power supply.
Click to expand...
Click to collapse
Regarding connecting a external DAC to the V30 I currently have that working with my V30 and my FIIO Kunlun E18. The cable used is below. I know that it's not the same thing that you are talking about because it's not exactly an OTG adapter but it works for my purposes. Good luck to you.
https://www.amazon.com/gp/product/B01LONQ7R6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1https://www.amazon.com/gp/product/B01LONQ7R6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Thanks for the info.
Do I need to change anything in the settings?
Or is it basically plug and play?
https://www.amazon.com/FanTEK-Conve...01N75X6MW/ref=cm_cr_arp_d_product_top?ie=UTF8
.
This adapter saved me and my old sandisk flash drive back talking again.
mattmc1228 said:
Thanks for the info.
Do I need to change anything in the settings?
Or is it basically plug and play?
Click to expand...
Click to collapse
It's plug and play but when the DAC is connected it asks you if you want to set a default app to the USB device. Be sure to select NO and just cancel out if window. I was selecting yes when I had USB pro music app installed and it prevented me from hearing anything from LG music player, YouTube,and other 3rd party apps.
Sent from my LG-H932 using Tapatalk
I'm also facing the same issue with an otg adapter, exact same symptoms.
Is there any solution other than buying specific otg adapters like the ones listed above?
I've also noticed that my V30 is very picky when it comes to usb connection. I have an usb c flash drive, and if it moves in the slightest, the connection just drops. It also happens with some usb cables that I've tried to use to connect the phone with my pc.
Hi!
Background:
I'm an esport producer and after some nightmare productions I'm really excited about the rog phone as it seams to be the only phone that have the features needed to make it into a good esports phone (e.g. Having 8-10 players competing in from of an audience), mainly: Hdmi output, ethernet capabilities and usb-c ports on the side..
Problem: After first successfully testing out Hdmi + ethernet connection I wanted to try if I could use the fan accessory and still be able to get the Hdmi signal from it.. When I connected the fan it told me to update the fan firmware so I did, but after that I'm not able to get Hdmi signal either with or without the fan accessory.. For instance, when I plug in my portable asus laptop monitor (power and signal from usb-c) the monitor starts to boot up and then dies.. Then tries again and dies and so on.. On my Samsung s8 it works fine.. So I'm guessing the firmware limits the power that the phone can output on the usb-c port.
Question, has anyone else experienced this issue? Is there a way to uninstall the fan firmware update (that obviously did not only affect the fan but the phone as well). The Hdmi adapter I used was something very similar to the professional dock but is actually an usb-c dock ment for laptops..
Tl:dr; hdmi doesn't work after "fan firmware update", plez halp.
Best regards
Ludvig Fjell
Qruxel E-sports Studio
Just a small update,
I was able to get it to work if I disconnect the power cable from the USB-C dongle and then connect it again.. and sometimes it also requires me to disconnect the HDMI + reconnecting that as well.. so I'm not sure if this actually was due to the fan firmware or just a result of a... weird bug(?) when it comes to the OTG features of the phone.. because connecting the dongle with both HDMI + power already plugged in does not work.
Anyway, just wanted you guys to know that it does work, just need to randomly connect/disconnect cables from the dongle first =)
Best regards,
Which USB-C to HDMI adapter were you using? I am looking for one that works with this device, aside from the fairly costly pro dock.