Hello all,
I think my MIBox 3 enhanced edition has been bricked during a firmware re-install. For some reason. It just will not power on.
I have read a previous post : https://forum.xda-developers.com/an...ogic/s905x-xiaomi-mi-box-3-mdz-16-aa-t3502992
Where the author mentioned connecting 2 metal points to power on the device.
Is there any such action I can take to try and force power on the MDZ-18-AA?
Related
Hi guys
I have done my basic research on all the forum room and can't find a answer to my problem.
I have Samsung S3 , I have not rooted or flash the device , I have not install any apps for the pass 2 months , for some reason today my device restarted and then got stuck on boot screen "Samsung Galaxy S3 GT-I9300" , am totally new to android and only had my device 9 months.
from all the basic searches I have done , I have try pressing vol key up + Home Key + power key) nothing happen
I tried : Switch off the device.
Press and hold Volume Up + Home Button + Power Key.
After 2-3 seconds, release the Power Key.
nothing happens here either this suppose to do a hard reset
I have taken the battery out , re-inserted the battery hold the power key for 10secs and I still don't get any where
each attemp I only get the boot screen the only luck I have had was by pressing the vol key down + home key + power key , i get the downloading Rom and this obviously does nothing as I can't get to the internet via wireless
please someone helpme the last person who posted this type of topic on this forum room did not get any replies.
I am sure I am not the only one who has experience this problem.
I am with three network if that makes any differents
thanks for your support.
Search 'sudden death' - you'll find more on it there
I has this problem with mine - I ended up taking it to Samsung for repair under warranty: it was a mother board replacement
it is however possible that you could fix it
Cn you get into download mode? (home + power + vol down)
if you can get to download mode ^^^ post above then all is well all you need to do is flash stock rom.
Getting into download mode is good news, Now plug your phone in to your computer, launch ODIN, and flash the correct stock firmware.
Thank you guys for your prompt reply , I have decided to take the device back to Car phone Warehouse as it is still under warrantee , I don't want to risk the manufacture guarantee. On this note I will like to salute all those geek's who have rooted their phones. :cyclops:
waheedrafiq said:
Thank you guys for your prompt reply , I have decided to take the device back to Car phone Warehouse as it is still under warrantee , I don't want to risk the manufacture guarantee. On this note I will like to salute all those geek's who have rooted their phones. :cyclops:
Click to expand...
Click to collapse
welcome in the emmc burned club - you are number ???
Flashing stock rom - chainfire tar - recovery tar - or whatever wont help you, i made a thread about it, no matter what you get "cant get pit" when you flash in odin
Sorry bR0 - seams like samsung made a MAJOR hardware error here - makes me thinking twice again before buying a sammy phone again, its a pitty cose it really is the nicest phone out there - maybe htc phones dont do this crap.. dont now
And since you haven't rooted or even flashed it, it proves just further that this is no "soft" problem but only faulty hardware !!!
Here is my link to tar files >http://forum.xda-developers.com/showthread.php?t=2019902
And just so you now, flashing a rom DONT void your guarantee, in EU at least, its a proven court judgment ! > http://forum.xda-developers.com/showthread.php?t=1998801
Urgent illegal advice required on 'sudden death'
Hi all /comrades
Four days ago I decided that I had to take Samsung Galaxy S3 to Carphone warehouse for repairs as the phone was still under manufacture warrantee , I did not wanted to go via the rooted / flashing my ROM . well guess what happen.
Carphone Warehouse Engineer total me the following and I quote " Please read notes , unfortunately handset returned unrepaired due to device rooted thought custom firmware, we have provided photo evidence. this is classed as Chargeable repair , please speak to one of the sales team to verify the cost of charge if you wish to take this ."
okay the photo screen that they gave me was of the one where you hold the volume button done + Home screen + power button and you get the Android stating its downloading on the top left side system status : custom and its this point he make out to me that I try to root or have rooted my phone.
as you all know I haven't got a clue on how to root or flash a phone never mind doing it.
I need your help , I am going to take Carphone Warehouse Ltd to Small courts to claim the cost of my phone and line rental back , How do I prove to the hight court that I actually did not root my device and Carphone Warehouse was trying to claim extra cash from me.
please all techie help me.
GUY I NEED HELP PLS
i tired flashing custom firmware and now all i get is flashing logo on bootup and reboots again and again...
i tried what mention in this thread but no luck!!
pls help and adive...
shub said:
GUY I NEED HELP PLS
i tired flashing custom firmware and now all i get is flashing logo on bootup and reboots again and again...
i tried what mention in this thread but no luck!!
pls help and adive...
Click to expand...
Click to collapse
If Stock ROM Via Odin Didn't Work Then Try Flashing Kernel
THE.W!ZARD said:
If Stock ROM Via Odin Didn't Work Then Try Flashing Kernel
Click to expand...
Click to collapse
which kernel mate?
---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------
im trying to flash
I9300XXELKC_I9300OXXELK4_I9300XXELKC_XEO
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
ok ive just done MEGAWIPE
so what should i flash.. pls advice...
---------- Post added at 08:36 PM ---------- Previous post was at 07:37 PM ----------
hi
i tired flashing back to orignal stock rom
I9300XXDLJ4_I9300OXADLJ4_BTU
still no joy!!
really need some advice pls...
ive tried many thing but no luck
all it does,,, every rom is flashing fine - via odin or cww but when it reboots the samsung logo keep flashing... it looks as if the phone is rebooting itself! dosnt go pass the samsung boot logo...
helpp plssss
pls guys... any help??
i can get into recovery and download mode... flashing stock and custom rom but it just wont go past the samsung boot screen.. it just rebooting on its own...
pls advice...
Same problem here... I tried flashing stock/official 4.1.1 after trying 4.1.2 and now I cant flash with either of them.
I tried flashing the siyah kernel and this had no effect either.
Please help.
Cask said:
Same problem here... I tried flashing stock/official 4.1.1 after trying 4.1.2 and now I cant flash with either of them.
I tried flashing the siyah kernel and this had no effect either.
Please help.
Click to expand...
Click to collapse
did exactly same..
this happen when i flashed 4.1.2
just to update.. i manage to fix this by applying I9300XXBLG8_I9300OXABLG8_I9300XXLG8_HOME.tar.md5
You may reset your phone by "Firmware Upgrade And Initialization" in the "Tools" of Samsung KIES 2.5. It will download the latest firmware for you as well.
I try to do an update to android 4.4.2 from siswoo phone r8, where the hardware is substantially equal to zp999 with the ability to upgrade to Android 5.1.1.
I was to upgrade and touched the phone and upgrade stopped at 41%, when i reboot the phone it goes into recovery mode.
I tried a second time and the upgrade went well, but from here I can not control the phone with 3 buttons and the virtual keyboard, the numbers 1,2 and 3 are right, but the nº 4,5 and 6, to write I have to carry the numbers 7,8 and 9. the numbers 7,8 and 9 have to write the touching below them.
After I returned to the latest original rom ZOPO zp999 (ZP999_20150212-183927 kk) but remained the same.
Has anyone had this problem before?
Can you suggest me some idea to resold this problem?
xixefiles said:
I try to do an update to android 4.4.2 from siswoo phone r8, where the hardware is substantially equal to zp999 with the ability to upgrade to Android 5.1.1.
I was to upgrade and touched the phone and upgrade stopped at 41%, when i reboot the phone it goes into recovery mode.
I tried a second time and the upgrade went well, but from here I can not control the phone with 3 buttons and the virtual keyboard, the numbers 1,2 and 3 are right, but the nº 4,5 and 6, to write I have to carry the numbers 7,8 and 9. the numbers 7,8 and 9 have to write the touching below them.
After I returned to the latest original rom ZOPO zp999 (ZP999_20150212-183927 kk) but remained the same.
Has anyone had this problem before?
Can you suggest me some idea to resold this problem?
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally i couldn't find the device forum for your mentioned one so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!
hello Oradea, thank you.
Do i need to make a new post or it's possible to move this post to Android Q&A, Help & Troubleshooting?
xixefiles said:
hello Oradea, thank you.
Do i need to make a new post or it's possible to move this post to Android Q&A, Help & Troubleshooting?
Click to expand...
Click to collapse
Yup, i will do it for you.
After doing some research, I suspect that the problem is the corrupt drivers. could follow in the footsteps of the Chinese recovery menu (vol down + power) and did a reset factory but failed after booting.
I tested where the touch screen was sensitive and the right and bottom can not draw anything and the 3 buttons (menu, home and back) don't work.
When you start the phone, these 3 buttons light up for 2 to 3 seconds and then go out. Is it software problem (drivers) or will even touch screen?
I tried to follow this post http://forum.xda-developers.com/g4/general/fix-screen-issues-t3172100/page4 but I could not do anything due to being a bit technical.
Someone could please help me?
The drivers that control the touch screen are initially loaded by build.prop file, if so it is possible to provide that file from a zp999?
hi,
my xiaomi mi pad 1 got hard bricked or whatever happened i could not find out properly in any of the online forums, one thing is that i could not turn the device on nor can i open the bootloader or twrp. All i could do is press the power button or the volume button comination only to see the screen turn on and turn off after 2 seconds I,ve read a few solution for this which involves opening the back cover and short circuting the sd card slot but i want to find any other non invasive method of bringing my tab back from the dead . If anyone could help please sugesst a solution ASAP
Suriya1996 said:
hi,
my xiaomi mi pad 1 got hard bricked or whatever happened i could not find out properly in any of the online forums, one thing is that i could not turn the device on nor can i open the bootloader or twrp. All i could do is press the power button or the volume button comination only to see the screen turn on and turn off after 2 seconds I,ve read a few solution for this which involves opening the back cover and short circuting the sd card slot but i want to find any other non invasive method of bringing my tab back from the dead . If anyone could help please sugesst a solution ASAP
Click to expand...
Click to collapse
Can you see mi logo?
Is the led blinking when connected to charger?
Did u use SuperSU to root your tab ?
Unfortunately If it is a hardbrick then you have to use the short circuit method there's no other option available
Check MIUI forum for tutorial on how to unbrick MiPad , if you face any problem join MiPad telegram group we will help you there ,BEST OF LUCK
Hi,
I am posting here for the first time here, even though I have been following and enjoying XDA for many years.
But for now I am looking for some advice/help to troubleshoot the phone of my child
and here are the details you sould know about :
- Phone model : Ulefone Metal 4G (not the Lite version)
- Problem description : Screen is black and nearly nothing is responding... no back light, no touch response, no led/screen while charging (usb to pc or direct charging).
This happened after plugging the phone on my car to charge and at that time the phone freezed on the ulefone logo screen, but never made it to the android interface. we then stopped the phone by pressing power a long time, but since that time the phone looks like dead.
- What I have tried so far :
~ start in recovery mode : by pressing VolUp+Power, I managed a few times to come to a screen with the following options
===> recovery
===> fastboot
===> normal
this is my only hope and the reason why I am asking for your help, but sadly none of these options are working and each time screen goes black after pressing the VolDown button to choose the option.
~ since I had this screen, I thought the problem might be with a corrupted partition (bootloader or any other needed at the beginning).
so I followed the steps to get the phone connected via USB and use the SP Flash Tool (I read both XDA posts and this one https://tehnotone.com/sp-flash-tool...installation-guide-including-bricked-devices/)
I installed the drivers, downloaded the TWRP recovery to try with something and so far so good I am all set to flash...
but when I start the process with "Download" and then plug the device.... NOTHING happens, the phone is never recognized.
~ I also watched some videos on how to disassemble the device, but I would only do that only if this my last chance.
This is where I am stucked so far, and right now I can't even go back to the "boot" screen with the 3 options.
Anybody already had a similar experience on this phone (or another one) ?
Any idea what I can try to troubleshoot ?
Any hope for the phone ?
Thank your for your help :angel:
Anybody out there with an idea what to do ?
You may have overloaded the battery, in which case the only option is to replace it by disassembling it and then replacing the old battery with a replacement one. Did you plug it into a cigarette lighter adapter or just a usb port? There are various things that could have gone wrong here, but I need to know the answer to the question above first.
Hi,
i am sorry I didn't check for your answer, but I finally did what you were suggesting :
disassemble phone and change some parts.
This is what I did exactly :
I first replaced the battery to realize that the problem was with the board in which you plug the usb cable and which purpose is to recharge the battery itself.
Dear Devs,admins,
I purchased recently nokia 1 ta-1066 model. recently During installation google security patch my phone got shutdown, then i think there is no charge in my phone , i have taken charging my phone whole day( 8hrs) , my phone not responponding for power button and also power+ vol up button to boot recovery
i finally conformed my phone is hardly dead
no sign,
no life,
just a toy(even childd not like somuch)
" hard bricked"
help pls......................................................
Hey people any update on TA- 1066 Firmware files?
Phone bricked BAD
unlocked Bootloader
flashed TWRP
and the phone bootlooped (boots straight to TWRP)
messed around too much and long story short; No OS anymore,
can push/pull adb and Fastboot still usable but that's pretty much it..
Even GSI roms don't boot.
any help is MUCH appreciated
thanks, hoping for some help
https://forum.xda-developers.com/nokia-1/help/nokia-1-ta-1066-dual-sim-india-hard-t3880265
---------- Post added at 11:25 PM ---------- Previous post was at 11:19 PM ----------
https://forum.xda-developers.com/nokia-1/help/nokia-1-ta-1066-dual-sim-india-hard-t3880265