Related
Hello, I am a newbie Android user and I have been exploring the greatness of the OS for few days now.
Just now I tried to update my firmware to 2.3.5 and followed instruction from a non-xda developer site and little did I know, it messed up my phone big time.
While I was loading all the files (CSC, tar, modem, etc), and I should've known better when the site told me to check the "re partition" box, but I was stupid enough to go along with it.
So Odin got stuck at re-writing the modem or something like that and I had to pull out the battery from the phone.
Now the phone turns on only in recovery mode and none of the recovery choices work, if I choose one it just shows a little green android with white bordered triangle with an orange exclamation mark in the middle.
I can still access the download mode by using conventional button pressing method, but my phone is NO LONGER RECOGNIZED through the USB so I cannot flash the old stock firmware...
Is there a fix for this? If anyone can help me resolve this issue I am willing to compensate very well in return...
Thank you so much for reading my convoluted troubled story, and I really hope to find some resolution in your wisdom.
If u can't reflash your farmware
Than their is only one option left
give it to the Samsung service center they will repair your phone
Sent from my GT-S5570 using xda premium
I'd be down to do so but it will be hard as I have 4 custom binary flash counter... What can I do as of now?
i dont know if this helps you out buddy but maybe if you read in this thread you might find people that had the same trouble as you..just try and search the thread first and if nothing comes up try and read the first page maybe there you might get an idea on how to unbrick the phone
http://forum.xda-developers.com/showthread.php?t=1075278
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
sfoksn said:
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
Click to expand...
Click to collapse
i dont want to advice you wrongly but you say you can get into download mode right? if it was my phone i would try and flash again but this time using the proper way to do it....but its down to you my friend i dont want to say do it and it gets worse..
EDIT: apologies i just saw that your usb is not recognised...do you have kies on the background when you flash with odin?
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
debsattam said:
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
Click to expand...
Click to collapse
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
sfoksn said:
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
Click to expand...
Click to collapse
Yeah it althrough works . Try it its helps he to unbrick ma t mobile oncemay be It works on ur phone to
Sent from my GT-S5570 using xda premium
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
So from your information provided, you have a stock recovery and your phone is semi-bricked. You can still boot and your computer won't recognize your phone.
Do you have a jig? What firmware did you flash? You could use a jig to reset the flash counter on the phone and return it for warranty saying that Kies messed up while upgrading firmware. If you've flashed the KI3 with the new bootloader then the jig won't be able to clear the flash counter.
EDIT: Maybe an experienced senior member might come and look at this thread and provide some other solution. Do wait!
EDIT2: Try reinstalling Kies and the drivers. Don't give up just yet!
sfoksn said:
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
Click to expand...
Click to collapse
I don't think that the guide he posted is particularly for galaxy s2 because he also mentioned a trackball...
but if you can go the settings he mentioned you might find something and lead you.
And if you decide to bring the phone to samsung you might want to have a read at Intratechs Official firmware
thread in (Original Android Development)there you can find a bootloader that you can flash so you can use the jig to reset the counter
edit: wow I also failed to read that your computer can't recognise your phone
anymore....
Have you tried to delete the samsung drivers when you go to
your hardware settings?? and let windows find it's drivers again?
Not sure if this will help. I read somewhere someone else with their PC not really recognizing the phone. Someone else advised to unplug the phone and remove the battery then connect to PC insert battery and put it into download mode.
I could be wrong with the method. Its just from my memory.
Also this may make no difference but maybe removing the sim and SD card. Someone will probably call me stupid for suggesting that though.
I wouldn't try that unbrick method mate. That looks like it is an unroot for an old phone..possible the G1 (AKA HTC Dream).
Thanks for all the help... I have been trying to uninstall the driver and reinstall it but no luck. If I could just get the phone to be recognized I think I will be fine, but I just don't know what to do
Thank you for all the suggestions, please keep them coming!
EDIT: this is the guide I used that messed up my phone.. http://androidflip.com/install-andr...-samsung-galaxy-s2-gt-i9100-installing-guide/
EDIT: Tried to reinstall KIES, no luck. It's like there's nothing on the other side of the USB cord... Not even a sound when I plug the phone in...
If it had been via XDA the instructions are do not do what they are saying .
In Odin Select Re-Partition , Auto Reboot and F.Reset Time
In Odin select these files
For PIT select u1_02_20110310_emmc_EXT4.pit
BIG BIG NO to the above .
As usual some stuff ripped from XDA and some from elsewhere .
My suggestion would be one buy USB jig it hopefully will clear the rom counter and enter download mode .
two in recovery mode go to mounts and storage and format cache data dalvik system and sd card .
Clean phone with nothing on it .Flash stock firmware .
http://forum.xda-developers.com/showthread.php?t=1075278
If PC does not now recognise phone either try another PC or return phone to service centre and say it failed on a Kies upgrade .
jje
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
droidluck said:
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
Click to expand...
Click to collapse
Thanks, I tried to do this but unfortunately the problem persists... What do you think the root of the problem is? I just dont' get it why it won't be recognized anymore.. I feel like I could easily get it to work if I could just get it to become recognized to flash stock firmware....
EDIT: JJE, I would turn it into the service place but I have custom rom count of 4 And I don't have any USB jigs to work with either.... I am still within the 15 days of the phone purchase day, would they be willing to swap my phone?
BUMP, any input would be appreciated...
Hi all,
I have a Lumia 710, with an unlocked Qualcomm bootloader. Yesterday accidently while flashing a rom as the NAND Disk Drive, whilst doing that i 'didn't' select the OSBL mode & the one beneath it which says W7 Qualcomm, before flashing it. Now it got flashed but the problem is its stuck to one rom. The App deployement tools gives errors such as 'make sure the phone is booted' even though its booted & fine. Or the other error it gives is 'request rejected by host machine'. When connected to Zune i now get pop up from Zune stating 'we can't create a connection from your phone to the internet' now this comes up all the time. I can sync stuff but can't deploy stuff or flash stuff
When i did try flashing the same rom again. After flashing it started directly at the livetiles screen as if nothing happened. I was expecting the 'Welcome to Lumia' screen. Please tell me whats happening. Also i was able to flash another rom on it. However still Zune gives the same error when connected so does the Deployment Tool. I can't figure out what can be done to solve this. I suppose the bootloader might be affected. How do i refresh it? I thought about going to Dload & then Back to Qualcomm. But it seems that many people have bricked phones trying to goto Dload from Qualcomm.
I want my Lumia to be unlocked, but more over, i want it working fine...
Any help & info is appreciated, Thanks
try going back to DLOAD..or do a hard reset to your phone and flash another Custom ROM again.
wen u connect the phone..open device manager and uninstall the drivers..reconnect in same mode..let the drivers reinstall.
surya467 said:
try going back to DLOAD..or do a hard reset to your phone and flash another Custom ROM again.
wen u connect the phone..open device manager and uninstall the drivers..reconnect in same mode..let the drivers reinstall.
Click to expand...
Click to collapse
I followed your instructions... Heres what i did...
Step I: Performed a Hard Reset using the Vol Dwn + Camera + Power Up keys.
Step II: Turned the Phone off & connected the phone with Vol Up + Usb connect. Theres an asterisk sign on Qualcomm CDMA Technologies MSM (I had it uninstalled prior to the reset using the Device Manager, It was detected whilst i connected it in Nand mode again)
Step III: Flashed a new rom on it. Lumiatrix v4.3. Still Zune is giving the same error & Application Deployment is not yet possible.
Surya there are three things i need to ask you.
1. In your Noob Guide the rom flash part you are asking people to turn On their phone, select Nokia Connectivity Mode & then select the .nb file & click Write Os. When i try that it asks me for a Nand Drive.
2. If i should try going back to Dload (can i switch to Qualcomm whenever i feel like?), can you please suggest me a clear & concise method, as to how to do it. I wanted to try this (http://forum.xda-developers.com/showthread.php?t=1702815) but its too confusing.
3. Is a bootloader refresh possible? I connected my phone when it was On. I got the Nokia Connectivity Mode. I tried installing the bootloader it found the phone but wanted me to be in the flash mode. However, when i enter the Nand mode it never finds my phone except when i Write Os on it.
I know i have a long list of questions. Its only because of the fact that i want to understand this better. I dun wanna end up bricking my phone. Thanks in Advance. Tc & Godbless!
Ok..wen u connect your phone to the PC while its ON, its in normal mode...the moment u turn on NSS, it will change modes, so it doesnt matter unless u click WRITE OS, which switches the phone OFF and puts it in the NAND dDrive.
as you have a 710, you can try going back to DLOAD and flash a Stock rom and see if that works, and then you can always go back to a qualcomm by my guide.
your at no loss , unless the problem you have a more complicated than we think it is.
surya467 said:
Ok..wen u connect your phone to the PC while its ON, its in normal mode...the moment u turn on NSS, it will change modes, so it doesnt matter unless u click WRITE OS, which switches the phone OFF and puts it in the NAND dDrive.
as you have a 710, you can try going back to DLOAD and flash a Stock rom and see if that works, and then you can always go back to a qualcomm by my guide.
your at no loss , unless the problem you have a more complicated than we think it is.
Click to expand...
Click to collapse
i would try going back to Dload. However, can you please suggest me a clear & concise method, as to how to do it. I wanted to try this (http://forum.xda-developers.com/show....php?t=1702815) but its too confusing.
Are you suggesting using NSS Bootloader Restore? If so, is there a mode that i need to be in? I'm using NSS 0.51b & when I click on restore it brings up a very scary warning message. As I don't want to brick it, i haven't used it yet.
Please suggest me a method... to return to Dload
Hello,
I bought a Lenovo P780 some days ago from china.
The phone came with many pre-installed Chinese apps that simply annoyed me, moreover I kept getting email has stopped, settings has stopped error messages. It was running on a VIBE firmware.
I checked online on how to Flash the phone to international version and downloaded some ROMs to do the flashing.
I managed to get the Flashing done, with this ROM, P780_ROW_S110_130629, but afterwards the Phone was completely unusable.
The problems are as follows,
1. The Phone does not boot up at all after pressing the power key, nothing on screen!
2. Pressing the power and volume keys shows nothing!
3. when plugged to the computer, i get the USB device not recognized error message! (I have all the necessary drivers installed)
The computer only see the phone as follows, Alcatel Single RNDIS Interface in the USB Device not Recognized window.
4. The computer keeps playing the plugged in devices sounds, plugged sound the followed by unplugged sound, repeatedly, and that is when the phone is still connected.
It´s only later I found some tip saying that one cannot flash a device produced 03.2014 and later with the ROM I used. Mine happens to be such a device Prod. Date 09.03.2014!
I have read through some almost similar problems but have not encountered my specific problem.
I am hoping to have someone who knows a workaround share with me how to get the phone back up running. I will highly appreciate your Help.
Solution Found!
Found solution :laugh:
1. Restored the comp to 3 days ago, before installation of any drivers
2. Downloaded and installed this driver, http://www.mediafire.com/download/lbdo0sglhdhrje9/MTK+Divers.rar
3. Downloaded my ROM here, used this one, P780_S123_ROW_131231
http://www.needrom.com/mobile/lenovo-p780-2/
4. I downloaded a newer version of Flashtools from this forum,
5. I downloaded this preloader,
http://forum.xda-developers.com/attachment.php?attachmentid=2744499&d=1400125492
6. I prepared the files for flashing as usual, (USB speed set to „do not switch speed“), changed the preloader´s location to the one I downloaded, (Trying to flash with the one in the ROM gave an error)
7. I removed the Phone´s back cover, plugged the usb cable to the phone, and holding down the reset button, connected the usb cable to the computer
8. Then released the reset buton and VOILA!, the flashing began :fingers-crossed: and ran without any errors.:laugh:
9. The greatest moment was to see the phone reboot fully after this. :victory:
After rebooting and connecting to the internet, I upgraded the FW and everything is running smooth.
I liked the preinstalled VIBE ROM, only that it had some flows here n there, plus the preinstalled Chinese apps annoyed me! I am now getting used to the original P780´s ROM.
Anyone who lands in my previous mess,- Flashing with wrong ROM and cannot get Phone to boot up, or get it recognized by PC, can try out my solution, of-course at YOUR OWN RISK!
PS, Always take time to inform yourself fully before performing this task, it will save you some Headaches!
Happy flashing
Uritam said:
Found solution :laugh:
1. Restored the comp to 3 days ago, before installation of any drivers
2. Downloaded and installed this driver, http://www.mediafire.com/download/lbdo0sglhdhrje9/MTK+Divers.rar
3. Downloaded my ROM here, used this one, P780_S123_ROW_131231
http://www.needrom.com/mobile/lenovo-p780-2/
4. I downloaded a newer version of Flashtools from this forum,
5. I downloaded this preloader,
http://forum.xda-developers.com/attachment.php?attachmentid=2744499&d=1400125492
6. I prepared the files for flashing as usual, (USB speed set to „do not switch speed“), changed the preloader´s location to the one I downloaded, (Trying to flash with the one in the ROM gave an error)
7. I removed the Phone´s back cover, plugged the usb cable to the phone, and holding down the reset button, connected the usb cable to the computer
8. Then released the reset buton and VOILA!, the flashing began :fingers-crossed: and ran without any errors.:laugh:
9. The greatest moment was to see the phone reboot fully after this. :victory:
After rebooting and connecting to the internet, I upgraded the FW and everything is running smooth.
I liked the preinstalled VIBE ROM, only that it had some flows here n there, plus the preinstalled Chinese apps annoyed me! I am now getting used to the original P780´s ROM.
Anyone who lands in my previous mess,- Flashing with wrong ROM and cannot get Phone to boot up, or get it recognized by PC, can try out my solution, of-course at YOUR OWN RISK!
PS, Always take time to inform yourself fully before performing this task, it will save you some Headaches!
Happy flashing
Click to expand...
Click to collapse
So you can confirm that the P780_S123_ROW_131231 version works on a Chinese model ?
No problems with bad signal, SIM not detected and so on ? I'm trying to figure out if it is safe to go ROW.
And as I see your steps, it would also be an option to remove the drivers again I think.
For me, it worked by simply plugging the device into a different port, and then I could install the drivers (as a regular Mediatek USB device, not as the Preloader device).
......confirm?.......
casaben said:
So you can confirm that the P780_S123_ROW_131231 version works on a Chinese model ?
No problems with bad signal, SIM not detected and so on ? I'm trying to figure out if it is safe to go ROW.
And as I see your steps, it would also be an option to remove the drivers again I think.
For me, it worked by simply plugging the device into a different port, and then I could install the drivers (as a regular Mediatek USB device, not as the Preloader device).
Click to expand...
Click to collapse
I can confirm with my device, I bought it directly from China and as I mentioned earlier, it had several Chinese apps that really annoyed me. I was really stressed up trying to configure what to do. But after reading several forums and stitching the different opinions together, I managed to do what I did earlier on today and everything is working out fine.
I had not done any backup of IMEI and co before flashing my phone yesterday, and that worried me the more. But after re-flashing it with the above ROM, everything got back together and even the IMEI was found automatically without further hustles.
Please do some more reading before trying my steps, my tryout worked good with my Phone, cannot tell whether it will with yours!
Saying this coz am not really sure whether the date written at the bottom of the Accu. represents the phone´s production date!
Uritam said:
Please do some more reading before trying my steps, my tryout worked good with my Phone, cannot tell whether it will with yours!
Saying this coz am not really sure whether the date written at the bottom of the Accu. represents the phone´s production date!
Click to expand...
Click to collapse
Well pretty sure the unbricking works, you got the preloader from my post
I'm now testing with VIBE 1.5 (KitKat), pretty good (almost not Chinese there) but some battery issues. Next step is to find out if I can get the 3G 900Mhz band to work.
Not sure if I'm going to switch to ROW, don't see any reason now.
Thanks for the feedback!
casaben said:
Well pretty sure the unbricking works, you got the preloader from my post
I'm now testing with VIBE 1.5 (KitKat), pretty good (almost not Chinese there) but some battery issues. Next step is to find out if I can get the 3G 900Mhz band to work.
Not sure if I'm going to switch to ROW, don't see any reason now.
Thanks for the feedback!
Click to expand...
Click to collapse
Sure it worked out just fine. Didn´t notice you were the same person with almost the same problem in the post with the preloader.
I will be checking out this pages to see how the Kitkat versin goes. Am am curious just how it will be.
Have a great week!
Thank you, you saved me!
I have bricked my lenovo p780 while trying to change the rom.
It was shipped from china with Vibe rom, I tried to install S113 rom and the phone went dead.
I have followed your guide and it worked. The phone is working!!!!
Edit: Just to add some more details in case some one else is having the same issue.
I made it with windows 8.1, drivers from this post, and S123 Row rom.
Then the firmware had 5 or 6 updates to 4.4.2 Kit Kat.
I have 2 more to go.... Total of 3 phones. Will update if any changes are found.
Also I will keep the software in case some of the links does not work or the code can't be found.
i dont understand the part where you hold the reset button and release it.
Uritam said:
Found solution :laugh:
1. Restored the comp to 3 days ago, before installation of any drivers
2. Downloaded and installed this driver, http://www.mediafire.com/download/lbdo0sglhdhrje9/MTK+Divers.rar
3. Downloaded my ROM here, used this one, P780_S123_ROW_131231
http://www.needrom.com/mobile/lenovo-p780-2/
4. I downloaded a newer version of Flashtools from this forum,
5. I downloaded this preloader,
http://forum.xda-developers.com/attachment.php?attachmentid=2744499&d=1400125492
6. I prepared the files for flashing as usual, (USB speed set to „do not switch speed“), changed the preloader´s location to the one I downloaded, (Trying to flash with the one in the ROM gave an error)
7. I removed the Phone´s back cover, plugged the usb cable to the phone, and holding down the reset button, connected the usb cable to the computer
8. Then released the reset buton and VOILA!, the flashing began :fingers-crossed: and ran without any errors.:laugh:
9. The greatest moment was to see the phone reboot fully after this. :victory:
After rebooting and connecting to the internet, I upgraded the FW and everything is running smooth.
I liked the preinstalled VIBE ROM, only that it had some flows here n there, plus the preinstalled Chinese apps annoyed me! I am now getting used to the original P780´s ROM.
Anyone who lands in my previous mess,- Flashing with wrong ROM and cannot get Phone to boot up, or get it recognized by PC, can try out my solution, of-course at YOUR OWN RISK!
PS, Always take time to inform yourself fully before performing this task, it will save you some Headaches!
Happy flashing
Click to expand...
Click to collapse
when did you install the drivers cuz im having the same problem . i already opened my phone and coudlnt find the said button not the same lenovo though i have a lenovo a360t with same problem , the pc do not recognize mtk port but the alcatel single thing . pleaseeee hellp . im so glad i found this . thank you sir.
Uritam said:
Found solution :laugh:
1. Restored the comp to 3 days ago, before installation of any drivers
2. Downloaded and installed this driver, http://www.mediafire.com/download/lbdo0sglhdhrje9/MTK+Divers.rar
3. Downloaded my ROM here, used this one, P780_S123_ROW_131231
http://www.needrom.com/mobile/lenovo-p780-2/
4. I downloaded a newer version of Flashtools from this forum,
5. I downloaded this preloader,
http://forum.xda-developers.com/attachment.php?attachmentid=2744499&d=1400125492
6. I prepared the files for flashing as usual, (USB speed set to „do not switch speed“), changed the preloader´s location to the one I downloaded, (Trying to flash with the one in the ROM gave an error)
7. I removed the Phone´s back cover, plugged the usb cable to the phone, and holding down the reset button, connected the usb cable to the computer
8. Then released the reset buton and VOILA!, the flashing began :fingers-crossed: and ran without any errors.:laugh:
9. The greatest moment was to see the phone reboot fully after this. :victory:
After rebooting and connecting to the internet, I upgraded the FW and everything is running smooth.
I liked the preinstalled VIBE ROM, only that it had some flows here n there, plus the preinstalled Chinese apps annoyed me! I am now getting used to the original P780´s ROM.
Anyone who lands in my previous mess,- Flashing with wrong ROM and cannot get Phone to boot up, or get it recognized by PC, can try out my solution, of-course at YOUR OWN RISK!
PS, Always take time to inform yourself fully before performing this task, it will save you some Headaches!
Happy flashing
Click to expand...
Click to collapse
But you said your pc was not recognizing your phone. Then how did you flashed the rom with sp flash tool because it requires connecting the phone to the pc via usb cable. How did you solved it ? I haved bricked my phone. Its not turning on or charging in off mode either..help :crying:
Suvam Mondal said:
But you said your pc was not recognizing your phone. Then how did you flashed the rom with sp flash tool because it requires connecting the phone to the pc via usb cable. How did you solved it ? I haved bricked my phone. Its not turning on or charging in off mode either..help :crying:
Click to expand...
Click to collapse
What did you done?
How the phone "died"?
Bad flash?
stympy said:
What did you done?
How the phone "died"?
Bad flash?
Click to expand...
Click to collapse
Solved
Dont know how the SP Flash tool flashed the firmware even after the pc was showing could not recognize device
help flashing not starting and pluged in pluuged out sounds are coming
---------- Post added at 07:18 PM ---------- Previous post was at 07:12 PM ----------
Uritam said:
Found solution :laugh:
1. Restored the comp to 3 days ago, before installation of any drivers
2. Downloaded and installed this driver, http://www.mediafire.com/download/lbdo0sglhdhrje9/MTK+Divers.rar
3. Downloaded my ROM here, used this one, P780_S123_ROW_131231
http://www.needrom.com/mobile/lenovo-p780-2/
4. I downloaded a newer version of Flashtools from this forum,
5. I downloaded this preloader,
http://forum.xda-developers.com/attachment.php?attachmentid=2744499&d=1400125492
6. I prepared the files for flashing as usual, (USB speed set to „do not switch speed“), changed the preloader´s location to the one I downloaded, (Trying to flash with the one in the ROM gave an error)
7. I removed the Phone´s back cover, plugged the usb cable to the phone, and holding down the reset button, connected the usb cable to the computer
8. Then released the reset buton and VOILA!, the flashing began :fingers-crossed: and ran without any errors.:laugh:
9. The greatest moment was to see the phone reboot fully after this. :victory:
After rebooting and connecting to the internet, I upgraded the FW and everything is running smooth.
I liked the preinstalled VIBE ROM, only that it had some flows here n there, plus the preinstalled Chinese apps annoyed me! I am now getting used to the original P780´s ROM.
Anyone who lands in my previous mess,- Flashing with wrong ROM and cannot get Phone to boot up, or get it recognized by PC, can try out my solution, of-course at YOUR OWN RISK!
PS, Always take time to inform yourself fully before performing this task, it will save you some Headaches!
Happy flashing
Click to expand...
Click to collapse
help flashing not starting and plugin out sound is coming
I know this is a very old thread, but, I was fixing up a P780 for a friend (he was constantly getting gapps.com stopped working and such) so I flashed some (stock?, Lenovo_P780_S115_MT6589_20130807) rom I found via SP Flash tool. It worked fine. So the next thing I was supposed to do was write IMEIs back, and for the life of me, i couldn't get that to work ( i would always get to "start searching kernel com port and handshake", and after that would get something like enter AP meta mode fail default, or something like that) so I started looking for alternatives, and found that one of the easiest ways is to root the phone, and install mobile uncle or MTK tools or whatever, anyway, I download twrp, flashed it using SP Flash Tool, and now the phone won't turn on, can't be detected by the Flash tool, it is in a way detected by windows (Unknown USB Device, Device descriptor Request failed), although it sort of goes on an off. LED lights up when connected to a charger or PC via USB
Hello. I've tried using multiple ROMs in my rooted phone with KDZ Updater, and I guess that one of the updates hanged, or maybe it was something else... I really don't know. What I do know is that my phone currently isn't able to enter recovery mode, and is also not showing any boot logos (neither 'LG' nor 'Android').
I did see some threads about this, one of them talking about starting in Download Mode and using KDZ in CS_Emergency mode with some French ROM. Well, I tried that and as soon as I press "Launch software upgrade" the program freezes until I plug my phone off the PC.
I feel as if something was stuck in my throat and the only way to get it out is by completing this... so any help will be greatly appreciated!
PS: All this happened in the process of trying to install Cyanogen Mod 10.1 (which I did not try yet).
http://forum.xda-developers.com/showthread.php?t=1119531
Need to make sure to get the right firmware, DLL file, and make sure you have the right port set on the program.
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=1119531
Need to make sure to get the right firmware, DLL file, and make sure you have the right port set on the program.
Click to expand...
Click to collapse
Thanks for the reply!
I appreciate the info, and I'll be checking what you've said. All the links in that thread are inaccessible because Fileserve only lets you download what you upload. Anyway, I'm curious as to what this "DLL" file does on a smartphone... why do I need these things? I never heard of them being mentioned anywhere.
I'll start educating myself ASAP. Meanwhile, thank you very much (and by the way, if it's of help to anyone, my phone is a GT540g from Personal, Argentina.
You're welcome. Sorry, didn't check to see if the files were still there and most every other site just had reposts of the fileserve links. However, finally found what you need here:
http://files-gsm.ru/lg flesh/GT540gAT-00-V20a-722-34-DEC-28-2010+0.dz.zip
I found this dll for your phone but not sure if it works with the firmware you have for that version:
http://www.mediafire.com/download/9v9e78xronadm0c/GT540g_100506_MP.dll
"A dynamic-link library (DLL) file is an executable file that allows programs to share code and other resources necessary to perform particular tasks..."
Basically it ties together a few things in Windows to let the flash tool work for your specific device is my understanding. But they have to be specific to the phone or it won't run once it checks the build.prop of the phone vs the firmware you're trying to install.
Keep in mind, I do not have this phone and have no way to test if they will or won't work so just like any other mod or upgrade - you do so at your own risk.
Thanks, but...
First of all, I'm very sorry not to have replied before, but I've been busy. Anyway!
Thanks, I appreciate the links, but I don't understand where to put the .dll file in my phone. I know you'd think I'm an idiot who doesn't know how to use Google, but I actually did search beforehand. I simply don't get where to put it.
Also, if it's worth the shot, I just noticed that I should disable the "Modem" that activates when I plug my phone in. The problem is, KDZ just does this simple log [attached] and states "===FINISHED===" (Note that I have 2 Modems listed in my device manager [attached screenshot])
Solution GT540
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
Hi.
I tried flashing a rom on a H96 Pro Plus 3+32GB box with an Amlogic S912, chip.
First couple of times when i tried flashing, it went up to 3-4% and gave out an error. Then i unchecked the erase flash and erase bootloader options and it went to 8% and then gave out an error once again.
After a couple of tries with the erase bootloader and erase flash options. It succeded flashing. But when i plugged in the box. There was no picture, there was just a blue light on the box.
The computer won't recognize the box after that, i've tried putting a rom on a SDcard, i've tried shorting some pins, not sure if they were the correct ones, but no luck. There is power going to the box, the blue light is on, but it won't turn on or display any signal.
Please help!
Thanks in advance!
Hi if you just search u would find the answer faster than writing this thread
anyway
hopefully it will help
other wise you should give more detailed and explained info
mazjed said:
Hi if you just search u would find the answer faster than writing this thread
anyway
hopefully it will help
other wise you should give more detailed and explained info
Click to expand...
Click to collapse
Hi.
Trust me i've searched for a week without any success. Unfortunately the video didn't help me since my problem currently is that the box is getting power but there is no hdmi signal, nor the box is getting recognized by the pc after flashing the rom.
Thanks for trying to help.
then the only chance you have is the short method
mazjed said:
then the only chance you have is the short method
Click to expand...
Click to collapse
Hi
I tried shorting pins, like in the tutorial but nothing happened. Not getting recognized still.
Hi
Ok, so i've fixed the tv box and it turns out i was doing something wrong. I didn't have power plugging it in. I was relying on the usb connection to give enough power to the box. I've done this to get back the box. Please if you don't know what you are doing, get someone that really knows. I'm not responsible for any damage that may happen. This is just what i've done to recover the box.
1. Hold the reset button on the box
2. Plug in USB in the pc and in the box
3. Wait 2 seconds and then plug in power.
4. Hold the 5th and 6th pin (i think). Please watch the video andmake sure that you know what you are doing, since 1 bad move could render the box totally unusable. Thanks. you should hold the pins for a couple of seconds and it should pop up
Also i wasn't able to install Aidenrom (while flashing it gives out an error) or Atvexperience (it cant get imported by usb burning tool)
I reinstalled the default rom. And i was using USB Burning Tool V 2.0.8
Thanks for your help.