This is a bit of an annoyance. When using a data-only sim, I simply get a no service sign on the status bar along with 4G / H+ / whatever the connection is. The connection doesn't show the carrier, but rather "Emergency calls only."
Of course, the data connection works normally. It's just the way it's shown that annoys me.
Is this true for other people? Any way to show the signal strength even if it's a data-only sim?
Thanks.
Related
With Use "2G Only" checked I get NO data. I've been googling and testing for 4 hours.
When I uncheck "2G Only" it switches to 3g and I get data. If the 3g signal is bad it will switch to E and I will get data and if I move near the window and the signal gets better it will switch back to H. So I know Edge works fine and is in this area.
At the same location, if I check 2G Only, I get no data. Voice is fine.
I went into *#*#4636 Info and when GSM Only is selected, I press Menu, and it shows Enable Data connection but when I select it, it does nothing. The menu disappears but it acts like nothing happened.
When I boot Windows Mobile 6.5 Edge and 3G work fine.
I have to get 2G only working because the 3g is random in my condo.
FYI, I can't get MMS sending to work either. I tried port 8080, I tried with username and without, with and without passwords, with APN type and without too.
I've had the same problem on builds that have a 3g only choice (wcdma). When selecting, I get no signal, otherwise it was fine. I wonder what that is messing with.
nrfitchett4 said:
I've had the same problem on builds that have a 3g only choice (wcdma). When selecting, I get no signal, otherwise it was fine. I wonder what that is messing with.
Click to expand...
Click to collapse
I have the same issue too
What network are you on? TMobile I assume since you talk about Edge and GSM.
Edge is 2.75G in essence. TMobile does not have a distinct 2G signal, at least not that I am aware of. It goes G (no data), E (Edge 2.75G), 3G, and H.
So by choosing 2G only, you eliminate even E...therefore no Data.
J
I'm on AT&T with a Telstra phone that has 850Mhz data.
If 2.75G is Edge and HAS data, how do I select it from the *#*#4636 or from some other menu?
On Windows Mobile 6.5, when I select GSM only I still get EDGE for data. So I can have a reliable voice call and when I'm not talking I can have Edge data.
A few times I noticed all the signal bars gone and just the no signal circle with bar showing and when I try to make a call it shows no network, but the data indicator arrows next to it are still there and can access network through data at full speed so haven't actually lost the signal. Has anyone else seen this happen because I tried sim in other phone and works fine so definetly not a network problem and only intermittently happens on S3.
Hey guys, I have a T-Mobile branded Galaxy S5 (SM-G900T) that I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar. So then I'll turn off WiFi and I will have bars but the 4G LTE indicator will be gone and the only way to get it back is to reboot the phone. Any ideas as to what this could be? I have tried using both the T-Mobile & Metro PCS APN settings but the issue still happens no mattter which APN the phone is set to. Any help would be greatly appreciated. Thank you!
namicone said:
Hey guys, I have a T-Mobile branded Galaxy S5 (SM-G900T) that I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar. So then I'll turn off WiFi and I will have bars but the 4G LTE indicator will be gone and the only way to get it back is to reboot the phone. Any ideas as to what this could be? I have tried using both the T-Mobile & Metro PCS APN settings but the issue still happens no mattter which APN the phone is set to. Any help would be greatly appreciated. Thank you!
Click to expand...
Click to collapse
What rom are you using? that would be the first question. Little more info sir....thanks
AxAtAx said:
What rom are you using? that would be the first question. Little more info sir....thanks
Click to expand...
Click to collapse
No ROM, it's stock.
wifi calling enabled and set to only make calls on wifi?
This will happen when you have wifi calling enabled. That is why you see the cell signal bars go gray or grayed out. Turn off wifi calling and you will see you signal bars come back, as long as you have cell signal (service) at your house.
galaxyuser88 said:
This will happen when you have wifi calling enabled. That is why you see the cell signal bars go gray or grayed out. Turn off wifi calling and you will see you signal bars come back, as long as you have cell signal (service) at your house.
Click to expand...
Click to collapse
Having WiFi calling enabled won't affect your data and messaging at all unless there is a connection issue with the router.
namicone said:
I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar.
Click to expand...
Click to collapse
It sounds like a connectivity issue on the routers side if the APNs are correct. I would go back to Metro PCS APNs then check your signal strenth and link speed in the phones WiFi settings, then check to make sure WiFi calling does not display an error in the call settings. If all 3 are good then check your client list on router and make sure phones IP address and MAC id is there. If IP and MAC id are good run diag log on router and possibly change/test different wireless channels on your router.
I never have WiFi calling enabled so I don't see that as a cause, and I have tried both the MetroPCS and T-Mobile APN settings and it still happens. I'm still able to receive calls and send text messages but I can't receive MMS messages or access data. The only way to fix the issue is to turn on airplane mode for about 10 seconds and then turn it off and I get the 4GLTE signal indicator back along with full service. Its really weird because when this happens, I still have a signal indicator with 3-4 bars but the only the 4GLTE indicator disappears.
namicone said:
I never have WiFi calling enabled so I don't see that as a cause, and I have tried both the MetroPCS and T-Mobile APN settings and it still happens. I'm still able to receive calls and send text messages but I can't receive MMS messages or access data. The only way to fix the issue is to turn on airplane mode for about 10 seconds and then turn it off and I get the 4GLTE signal indicator back along with full service. Its really weird because when this happens, I still have a signal indicator with 3-4 bars but the only the 4GLTE indicator disappears.
Click to expand...
Click to collapse
I will get the same issue as stated above. When you have bars present with no data icon, its because your phone is latching on to another network when MetroPCS is not to be found. At my office, T-Mobile service is the pits, yet i get bars present. I usually open the dialer and type *#0011# and it will show what band your phone is picking up, from there you can tell if you are really on MetroPCS or someone elses network.
Is there an APP for android to have to signal bars move and say 3G, 2G, 1X, ect.
To clarify, my phone is rooted and does not have service and never planned to be used for cell service again, and I am tired of seeing the bars with an "X" through them, so my question is... Is there an app or XPOSED framework to have settings to the signal bars to "SIMULATE" them doing different signals and 3G, ect
Bump...
Hi All,
I just got the international Z5c, model E5823, which supports both tmo us LTE bands in my area (bands 1 and 12). When I have preferred network type set to 3G, I get more bars and have data connectivity. When I switch it to 4G, the bars go down to 1 or 2, and I get no data.
I did a logcat while switching from 3G to 4G and noticed that while switching, the icon switches between H+ and H, then eventually drops out. I'm still trying to see if there is anything useful in the logcat, but the one thing I noticed that seemed interesting was
Code:
D/StatusBar.NetworkController( 2598): updateIconSet, voice network type is: 13/LTE, data network type is: 13/LTE
To me, this looks like I might be seeing issues with some failed attempt to use voice over lte (as this phone supports it).
Regardless, does anyone know how I can disable voice over LTE? There was an option in the phone menu on the Z3 supposedly that would let you toggle, but I don't see it anywhere on this.
I'm going to be cross posting this in the sony forums as well, so if I hear back I'll post here.
Fixed it. I turned it onto 3g and selected "Internet settings" from the networking menu, which seems to have downloaded some configuration stuff from my carrier. After switching back to 4g I have fully working data.