I was factory reset > installing 21a but i forgot the 21a file wasn't in the sd card.
Now the phone is in the lg screen forever and i can't find a way to shut down the phone.
Connect via usb cable to PC,
then do a force reset (Power + Volume down), quickly keep only Volume Down pressed to get into fastboot/bootloader mode.
Once it's in fastboot mode ("bootloader"), tap volume down to switch between "Reboot" and "Shut down".
Once "Shut down" is displayed gently tap the power button, that should turn the phone off.
zacharias.maladroit said:
Connect via usb cable to PC,
then do a force reset (Power + Volume down), quickly keep only Volume Down pressed to get into fastboot/bootloader mode.
Once it's in fastboot mode ("bootloader"), tap volume down to switch between "Reboot" and "Shut down".
Once "Shut down" is displayed gently tap the power button, that should turn the phone off.
Click to expand...
Click to collapse
Thanksyou so much for replying!
should i flash 21a in lgup if i want to unbrick or do i go into twrp?
Related
My friend thought that to change from android to webos he had to press the power button and volume up to enter moboot, but he enter to the bootloader mode (big usb connection icon). I tried to power it off and combine power button and volume to see if I can get out of this and nothing. The only solution is to wait for the charge to deplete?
EDIT: It turned off by it self this thread can be close.
just so you know for the future, holding the power button along with the center button for a few seconds does a soft reset even while stuck in recovery or while booted in webos.
Okay i have this radar that i am trying to perform a hard reset on but the anytime i do the press volume button and then power all it does is turn the device on. And then when i just hold the down volume key when its turned off the device enters into enter usb host mode. So i was wondering what i should do to perform the hard reset. And if i am on the enter usb host mode screen is that the screen for changing roms and stuff like what exactly is that screen. Thanks!
Afiaus said:
Okay i have this radar that i am trying to perform a hard reset on but the anytime i do the press volume button and then power all it does is turn the device on. And then when i just hold the down volume key when its turned off the device enters into enter usb host mode. So i was wondering what i should do to perform the hard reset. And if i am on the enter usb host mode screen is that the screen for changing roms and stuff like what exactly is that screen. Thanks!
Click to expand...
Click to collapse
NO...! from usb host mode u cant directly change the rom unless & until it gets patched by the HSPL...! u just try to hold UP+DOWN volume key and then press POWER button,while pressing POWER button dont release the Volume keys....!
(sorry about my chinglish )
So here's how:I locked my nexus10 and forgot the password, and I do not see the "Forgotten" button on the screen and also I didn't turn USB debugging mode on, so is there any possibility I can save my data instead of cleaning them up? Thank you (btw, I deleted the original recover files(because I once booted Ubuntu Touch on it) how can I reset it anyway?) Tanks a lot
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
eytan123 said:
Don't think there's a way..
And you should be glad because if it was possible anyone could break into your device.
P.S.
chinglish - like!
Click to expand...
Click to collapse
yeah........I see, so how can I clean everything, the recovery is dead and I didn't turn the debugging mode on
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
eytan123 said:
Right from Google:
1.If your tablet is on, power it off.
2.Press and hold Power, Volume Up, and Volume Down at the same time for several seconds. You will see the word Start with an arrow drawn around it.
3.Press Volume Down twice, until you see the option Recovery mode.
4.Press Power to restart into Recovery mode. You should see an image of an Android with a red exclamation point.
5.While holding down Power, press Volume Up.
6.Use the Volume keys to scroll to Wipe data/factory reset and press Power to select it.
7.Scroll down to Yes - erase all user data and press Power to select it.
Note: If at any point during the above steps your tablet becomes unresponsive, you can restart it by holding down the Power button for several seconds.
Click to expand...
Click to collapse
The recovery has been deleted by me when I boot Ubuntu Touch on it
u cant get download mode and flash recovery? debuging must be on to do it? i dont think should be on.
Sent from my GT-I9100
Fastboot
You can use Fastboot without USB Debugging enabled.
"To use fastboot, power off, then hold down the power button and both volume buttons. That will take you to the bootloader screen where you, or the toolkit, can do fastboot commands."
I've attached a CWM Recovery image for your device.
Place it somewhere on your computer and open the Terminal application on your computer. Run the following command:
fastboot flash recovery <image location>
Then you can backup /data using advanced backup, perform a factory reset, CREATE A FULL BACKUP, then restore /data using advanced restore.
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
sara7 said:
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
Click to expand...
Click to collapse
How to go in Recovery, Fastboot mode and Bootloader mode.
=====================================================================
1) Bootloader Mode:
While your devices is powerd off, press "Power" + "Vol. Down"
until Bootloader screen appears.
-----------------------------------------------------------------------------
1.5) How to use buttons in Bootloader,Recovery and Fastboot mode:
"Volume Up" : go to previous item
"Volume Down": go to next item
"Power" : to select item
-----------------------------------------------------------------------------
2) Fastboot Mode
While in bootloader mode,
press power button and you are in fastboot mode
-----------------------------------------------------------------------------
3) Recovery Mode
While in bootloader mode, press "Vol. Down" and after
press "Power" button and after that you are in a screen
with a phone and an alert press "Vol. Up" + "Power" to go in recovery
sara7 said:
Just got a 2nd hand legend, I cleared the data (hard reset?) without a storage card in it.
now stuck in GERMAN. I have tried to hard reset by useing volume buttons and power key but this does not appear to work!
Click to expand...
Click to collapse
Remove and then reinsert the battery.
after trying to downgrade from pie to oreo, with my korean version, i got stack on the logo screen,even after rebooting it gets stack there someone help
somene?anyone? @ChazzMatt please help us. stuck on LG V30ThinQ screen
To enter recovery:
1. Turn off the phone by holding down the power button for several seconds.
2. Hold down the Volume Down and power buttons simultaneously.
3. When the LG logo appears, release the power button and then press and hold it again.
4. Continue holding both buttons until the "Factory data reset" menu appears.
5. Choose Yes twice. With TWRP installed, it will enter that rather than perform a factory reset.
To enter download mode:
1. Connect a USB cable to your computer.
2. Turn off the phone by holding down the power button for several seconds.
3. Hold down the Volume Up button.
4. While still holding it down, plug in the other end of the USB cable.
You can now run patched LGUP and flash a KDZ. Note that, when you do, you can select only some parts, like the modem.