Related
Hey guys, I just ordered a couple of these:
http://www.amazon.com/Skque-Black-Silcone-Transformer-TF101/dp/B006JJ8ZU8/ref=sr_1_45?s=electronics&ie=UTF8&qid=1323510433&sr=1-45
I've been looking for a while, there's not many silicone cases for the transformer and I haven't seen these posted here so I thought I would share. They have a few different colors and they don't have a funky design on the back. I'll snap some pics when they get in and add them here along with a mini review.
That looks a lot like the Sikai case but is only $8 compared to $17! Nice!
Hmm, I wonder if you could chop off some silicone to make it compatible with the dock (although I guess it wouldn't close all the way still).
degeneration said:
Hmm, I wonder if you could chop off some silicone to make it compatible with the dock (although I guess it wouldn't close all the way still).
Click to expand...
Click to collapse
from the looks of it, it should fit the tablet while it's docked (see the slots on the bottom edge for the connector and the locks?)
dohclude said:
from the looks of it, it should fit the tablet while it's docked (see the slots on the bottom edge for the connector and the locks?)
Click to expand...
Click to collapse
Think your missing that the tablet seats in a groove that fits tight around the bottom edge.
zedorda said:
Think your missing that the tablet seats in a groove that fits tight around the bottom edge.
Click to expand...
Click to collapse
I am missing that... because I don't have the keyboard dock :cries:
Silicone is soft just force it on there lol
Thanks OP, picked up one even though I have two portfolio cases already. I think this will do at home use but will probably be a lint magnet.
AstroTrain said:
Thanks OP, picked up one even though I have two portfolio cases already. I think this will do at home use but will probably be a lint magnet.
Click to expand...
Click to collapse
I'll take lint over scratches and dents any day.
goplaycheckers said:
That looks a lot like the Sikai case but is only $8 compared to $17! Nice!
Click to expand...
Click to collapse
This wasn't there when I bougth the Sikai case two weeks ago. Paid too much now!
from the pictures it is hard to tell if the case has the proper cutouts for the power and volume buttons. Can anybody confirm that it does.
kd5dmg said:
from the pictures it is hard to tell if the case has the proper cutouts for the power and volume buttons. Can anybody confirm that it does.
Click to expand...
Click to collapse
I just got the case delivered today. There are no cut out for the volume and power buttons, they are coverd with raise tabs so u know which is which. I prefer this way to cover the buttons so less chance of grime getting into those slots. The fit is good very snug but if u hold it in portrait mode the sides tend to strech out a bit, wish it covered more of the tablet. Very nasty smell on first use and so far don't seem to have much issues with lint.
I will most likely use this at home as both of my portfolio cases tend to put too much weight on the tablet. For 8 bucks what is not to like?
my bezel frame around my screen came off so I hadda do a ****ty super glue job. do u think this case will not only hold everything together but.hopefully protect it from further damage?
Sent from my Galaxy Nexus using xda premium
phillybizzle said:
my bezel frame around my screen came off so I hadda do a ****ty super glue job. do u think this case will not only hold everything together but.hopefully protect it from further damage?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No, the sides are loose, you can move them with your thumb. What you need is probably a hard shell back cover case that is tight against the edges (or a portfolio case), don't know if they make them. these covers don;t really do any protection except for scratches on the back, you drop them any distance your tablet is history.
For those of you who've been waiting for the Seidio Active / Active Combo cases are now out. http://www.seidioonline.com/category-s/7709.htm
I'm waiting for the Active Combo with Kickstand. Should come out here soon enough.
This happened a few days ago.
@Taptalk-GalaxyNote
Are there any pictures of the holster? I need something that the Note actually goes into and not just snapped in place.
reubenray said:
Are there any pictures of the holster? I need something that the Note actually goes into and not just snapped in place.
Click to expand...
Click to collapse
check out pics of the holster for the other phones..they are all the same design..nice felt the screen lays against and the bottom part of the phone on both corners will slide into it and the top clips...you'll see in the pics..
the holster/case combo is really nice..
I have the Active and holster for my Inspire 4G. It's a really good case and holster. The Note one looks exactly the same so buy with confidence.
Ordered the combo case for my note (international) last night.
They really need to come out with the Surface cases.
Sent from my SAMSUNG-SGH-I717
nice! I am looking for a good one for couple days now. can't get my beautiful note scratched up
p51d007 said:
Ordered the combo case for my note (international) last night.
Click to expand...
Click to collapse
what exactly is the combo? that includes the holster?
because holster doesnt seem available for ATnT version
but i thought all the cases could fit either version?
Eddie Bombay said:
They really need to come out with the Surface cases.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
+1 on surface combo!
Sent from my SAMSUNG-SGH-I717 using XDA
Only thing I could think of would be the placement for the microphones, cap buttons or speaker?
SayWhat10 said:
what exactly is the combo? that includes the holster?
because holster doesnt seem available for ATnT version
but i thought all the cases could fit either version?
Click to expand...
Click to collapse
p51d007 said:
Only thing I could think of would be the placement for the microphones, cap buttons or speaker?
Click to expand...
Click to collapse
P51,
Let us know how you like your active case when you receive it. I use a TPU case for both of my GNotes and I can confirm all the cutouts are the same; mics, etc.
I am bummed they do not have the surface combo out...
SayWhat10 said:
what exactly is the combo? that includes the holster?
Click to expand...
Click to collapse
combo is the case and holster..
Comes with fries and a drink.
Sent from my SAMSUNG-SGH-I717
mrdsl said:
combo is the case and holster..
Click to expand...
Click to collapse
+1
eddie bombay said:
comes with fries and a drink.
Sent from my samsung-sgh-i717
Click to expand...
Click to collapse
+2
Hurry up combo with kickstand
Sent from my SAMSUNG-SGH-I717 using XDA
maydre said:
Hurry up combo with kickstand
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I agree, I want the white one to go with my white note. I think it is the only case and clip combo I have seen that's going to be available in white.
Sent from my Galaxy Note
Eazie757 said:
I agree, I want the white one to go with my white note. I think it is the only case and clip combo I have seen that's going to be available in white.
Sent from my Galaxy Note
Click to expand...
Click to collapse
http://www.ebay.com/itm/220970767172?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
I found that on eBay, and it's from a US based company too.
The combo case arrived Wednesday. FITS PERFECT! I think it is a little less bulk than the Speck case I was using (from at&t). Holes for the microphones, camera, speaker, LED are lined up perfectly. Nice snug fit in the belt clip case too.
The bottom sits into the holster, and on the other end is a spring loaded clip that snaps over the top of the phone, securely holding it in place.
planoman said:
P51,
Let us know how you like your active case when you receive it. I use a TPU case for both of my GNotes and I can confirm all the cutouts are the same; mics, etc.
I am bummed they do not have the surface combo out...
Click to expand...
Click to collapse
p51d007 said:
The combo case arrived Wednesday. FITS PERFECT! I think it is a little less bulk than the Speck case I was using (from at&t). Holes for the microphones, camera, speaker, LED are lined up perfectly. Nice snug fit in the belt clip case too.
The bottom sits into the holster, and on the other end is a spring loaded clip that snaps over the top of the phone, securely holding it in place.
Click to expand...
Click to collapse
Thank p51!
I love the combo. Is the phone pocketable with the active case if I want to go without the holster. How big is it on the belt. Pics would be super! Thank p51!
Sent from my SAMSUNG-SGH-I717 using XDA
Just upgraded from the Note 2 and disappointed to find out Momax did not make the same case that I been using for the 3.
Overall, any opinions on a case that has a kickstand and does portrait and landscape well?
Sent from my SPH-L900 using Tapatalk
I wish somebody knew. The VZW hard case has 2 way kickstand but fits so tight I broke my volume key taking it off. It also offers no protection on top or bottom only back and sides.
Amzer makes one but I can't find a single picture showing it in both portrait and landscape view.
Please help us find a good case!
I have 2 in mind, one is super slim and the other is super bulky lol
Reiko Polymer case
And aduro shell holster combo
Both on Amazon
1slow4G said:
I have 2 in mind, one is super slim and the other is super bulky lol
Reiko Polymer case
And aduro shell holster combo
Both on Amazon
Click to expand...
Click to collapse
The Aduro shell is the same one that broke my phone. Looks like VZW model. Nobody will confirm if reiko works in both orientations
Sent from my DROID RAZR HD using Tapatalk 2
recDNA said:
The Aduro shell is the same one that broke my phone. Looks like VZW model. Nobody will confirm if reiko works in both orientations
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
I can comfirm the Reiko works both ways. I had it in the past
1slow4G said:
I can comfirm the Reiko works both ways. I had it in the past
Click to expand...
Click to collapse
I just purchased one. Hoping for the best! Thanks. The Amzer and Aduro are both the same as evil vzw case so i guess no other choices exist
Sent from my DROID RAZR HD using Tapatalk 2
That Reiko case offers great protection aswell.
I am concerned it will interfere with easy use of buttons but we'll see....
recDNA said:
I am concerned it will interfere with easy use of buttons but we'll see....
Click to expand...
Click to collapse
You mean like hard to press? If so not at all. It's 2 part case. Rubber inner and polycarbonate skeleton
I use the Trident Kraken AMS, and it has a solid metal kickstand that is also reversible. Also provides superior protection for my phone. I dropped it down 30 flights of stairs at the mall escalator, and not a scratch. It's pure quality.
Probably makes it too thick but I will check it out. Thanks.
xdaDemiGod said:
I use the Trident Kraken AMS, and it has a solid metal kickstand that is also reversible. Also provides superior protection for my phone. I dropped it down 30 flights of stairs at the mall escalator, and not a scratch. It's pure quality.
Click to expand...
Click to collapse
Did you mean 30 stairs? 30 flights of stairs = 30 floors!
OK, I bought the Reiko Polymer Hybrid Kickstand Case. It is excellent, in fact I ordered a second one. Now...can anyone suggest a horizontal belt clip pouch that it will fit in? I have one Reiko pouch that isn't quite long enough and another that is so deep it is hard to get the phone out even though it is a perfect fit.
The phone in case is 6.3 x 3.25 x .6 inches. Anybody know a belt clip horizontal pouch it will fit in?
If you can DIY then check my signature.
I'd rather buy one
---------- Post added at 02:55 PM ---------- Previous post was at 02:44 PM ----------
CZ Eddie said:
If you can DIY then check my signature.
Click to expand...
Click to collapse
I don't see your signature?
recDNA said:
I don't see your signature?
Click to expand...
Click to collapse
Do you see anyone's signature? Maybe your browser is weird.
Here's the direct link.
http://forum.xda-developers.com/showthread.php?p=52585717
I still haven't found a manufactured case that I liked which has a good portrait kickstand.
But my DIY case does take a bit of work, patience and care.
Oh, I am very content with my reiko case now. I have seen your thread but did not make the connection. Now I am merely looking for a belt clip pouch to carry my note 3 in its case in. I have one pouch too small and another too large.
Here are some more cases . theres some heavy duty ones if anyone wants more protection and doesn't mind a little more bulk .
Haven't seen any reviews on xda yet so i figure i'll just post these up
links provided below :
Poetic Revolution case
http://www.amazon.com/Google-Nexus-Case-Built--Manufacturer/dp/B00OMGXW08/ref=sr_1_4?s=wireless&ie=UTF8&qid=1418991305&sr=1-4&keywords=nexus+6+poetic
Aero Armor (they listed it as LG NEXUS 6 ) but it looks like it does fit.
http://www.amazon.com/dp/B00OUIK9AE?psc=1
Armorbox Full-Body Protective Case
http://www.amazon.com/Protection-i-Blason-Full-body-Protective-Protector/dp/B00OGYP524/ref=sr_1_83?s=wireless&ie=UTF8&qid=1418991580&sr=1-83&keywords=nexus+6+case
There's also this: https://www.pure-gear.com
The slim shell, fits, looks, and feels great. At least as good as the ringgke fusion, if not a little better.
why nexus 6 not have smart case ??
I have the armorbox and it's pretty awesome! Great protection very Otterbox defender like.
Sent from my Nexus 6 using Tapatalk
kingston73 said:
There's also this: https://www.pure-gear.com
The slim shell, fits, looks, and feels great. At least as good as the ringgke fusion, if not a little better.
Click to expand...
Click to collapse
Would you say it helps make the N6 more grippy? ie: easier to hang on to?
Shawheim said:
I have the armorbox and it's pretty awesome! Great protection very Otterbox defender like.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
do you have any pictures of the phone with the case on showing the cut outs/ covers for the ports and how is the fitment?
kingston73 said:
There's also this: https://www.pure-gear.com
The slim shell, fits, looks, and feels great. At least as good as the ringgke fusion, if not a little better.
Click to expand...
Click to collapse
Thanks but not looking for slim cases , im looking for heavy duty cases . After all this is a $771.90 phone were talking about.
Anyone know where i can find a "kawaii" cover for this phone! For kawaii i mean some "cute-cutie" image on the cover! I can't find it anywhere:crying:
Thanks in advance
Yuuki Mikan said:
Anyone know where i can find a "kawaii" cover for this phone! For kawaii i mean some "cute-cutie" image on the cover! I can't find it anywhere:crying:
Thanks in advance
Click to expand...
Click to collapse
you probrably will have to wait as more cases become available.
nathanotis said:
Would you say it helps make the N6 more grippy? ie: easier to hang on to?
Click to expand...
Click to collapse
Definitely easier to hold, by a good amount.
Yuuki Mikan said:
Anyone know where i can find a "kawaii" cover for this phone! For kawaii i mean some "cute-cutie" image on the cover! I can't find it anywhere:crying:
Thanks in advance
Click to expand...
Click to collapse
I don't know if this would work for you, but the Ringke Fusion has a clear back, and includes a template for you to print your own designs for the back. You could have the most kawaii back ever if you find a decent picture and print it off to the specs necessary.
I found http://www.skinit.com/create-your-own. But No for nexus 6!
I think I should wait!
I don't have any pics of the case on the phone but I can tell you the fit is 100%. The built in screen protector is nice and clear and doesn't drag when you touch it. The port covers close great and don't flap or open unexpectedly. The power/volume buttons are easy to press and are distinguishable. I honestly don't have a single complaint .
Sent from my Nexus 6 using Tapatalk
kingston73 said:
There's also this: https://www.pure-gear.com
The slim shell, fits, looks, and feels great. At least as good as the ringgke fusion, if not a little better.
Click to expand...
Click to collapse
I'm actually curious as to whether you could cut the clear back out of this one and make an edge only bumper out of it.
I don't know, maybe but i don't know if it would stay on the phone after.
I like the Armorbox a lot. I use it for work or when I go to the gym. Its nice and grippy on all four sides due to the slighty rubbery texture. I took the screen protector off because i have a glass one. Ive already dropped my phone back side down on a hardwood floor and the case took it like a champ.
Droidslife said:
do you have any pictures of the phone with the case on showing the cut outs/ covers for the ports and how is the fitment?
Thanks but not looking for slim cases , im looking for heavy duty cases . After all this is a $771.90 phone were talking about.
Click to expand...
Click to collapse
570cdn. For me?
Via my NeXus™ 7FHD on XDA Premium app
Black Box said:
I like the Armorbox a lot. I use it for work or when I go to the gym. Its nice and grippy on all four sides due to the slighty rubbery texture. I took the screen protector off because i have a glass one. Ive already dropped my phone back side down on a hardwood floor and the case took it like a champ.
Click to expand...
Click to collapse
Thanks ill be ordering that shortly
Could you get a pic of the inside of the outer shell where the buttons are? I bought a Supcase Heavy Duty but it made horrible contact with the buttons on the N6. I had to be very deliberate with my presses to get them to work. I ended up returning the case but I have attached an image of my old Trident case for my Moto X showing what I mean. Thanks.
Black Box said:
I like the Armorbox a lot. I use it for work or when I go to the gym. Its nice and grippy on all four sides due to the slighty rubbery texture. I took the screen protector off because i have a glass one. Ive already dropped my phone back side down on a hardwood floor and the case took it like a champ.
Click to expand...
Click to collapse
Droidslife said:
Here are some more cases . theres some heavy duty ones if anyone wants more protection and doesn't mind a little more bulk .
Haven't seen any reviews on xda yet so i figure i'll just post these up
links provided below :
Poetic Revolution case
http://www.amazon.com/Google-Nexus-Case-Built--Manufacturer/dp/B00OMGXW08/ref=sr_1_4?s=wireless&ie=UTF8&qid=1418991305&sr=1-4&keywords=nexus+6+poetic
Aero Armor (they listed it as LG NEXUS 6 ) but it looks like it does fit.
http://www.amazon.com/dp/B00OUIK9AE?psc=1
Armorbox Full-Body Protective Case
http://www.amazon.com/Protection-i-Blason-Full-body-Protective-Protector/dp/B00OGYP524/ref=sr_1_83?s=wireless&ie=UTF8&qid=1418991580&sr=1-83&keywords=nexus+6+case
Click to expand...
Click to collapse
The Aero Armor case looks a lot like this one...
http://www.xtremeguard.com/Motorola...Spartan-PhalanX-Case-p/moto-nex6-spx-case.htm
jhk0215 said:
The Aero Armor case looks a lot like this one...
http://www.xtremeguard.com/Motorola...Spartan-PhalanX-Case-p/moto-nex6-spx-case.htm
Click to expand...
Click to collapse
Wow that's one expensive case and they do look similar
https://www.amazon.com/gp/product/B07GK3FK86/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
very well made , protective and classy
Looks nice, but I've never liked the the folios with the sleeve insert versus the TPU snap ins. They are never tight enough and the tablet always moves.
But it does look like a good case.
gottahavit said:
Looks nice, but I've never liked the the folios with the sleeve insert versus the TPU snap ins. They are never tight enough and the tablet always moves.
But it does look like a good case.
Click to expand...
Click to collapse
It is VERY TIGHT, and never moves. Cant tell if it is PU leather or real, but feels very nice in the hand, and the Spen stays put.....
ScottBroker said:
It is VERY TIGHT, and never moves. Cant tell if it is PU leather or real, but feels very nice in the hand, and the Spen stays put.....
Click to expand...
Click to collapse
I like this one better as it has a pocket for the spen tip and it keeps the spen steady instead of being wobbly.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/283183162876
Zionator said:
I like this one better as it has a pocket for the spen tip and it keeps the spen steady instead of being wobbly.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/283183162876
Click to expand...
Click to collapse
I don't like any of them. I've had folio type case (Spigen) ones on Galaxy Note 2 and I've hated that thing.
Too51oll said:
I don't like any of them. I've had folio type case (Spigen) ones on Galaxy Note 2 and I've hated that thing.
Click to expand...
Click to collapse
**** I just got the cover and yup its ****.
The build quality is very nice for the price and the spending holders are perfectly made but the stand is so bad.
If you are using the tablet while in stand mode it will keep tipping over. Damn that's annoying.
I didn't look properly on the pic before buying it and didn't notice it was a trifold stand.
Do u know of any covers with two spen straps and also uses the entire front flap as a stand over the ****ty folding covers ?
Zionator said:
**** I just got the cover and yup its ****.
The build quality is very nice for the price and the spending holders are perfectly made but the stand is so bad.
If you are using the tablet while in stand mode it will keep tipping over. Damn that's annoying.
I didn't look properly on the pic before buying it and didn't notice it was a trifold stand.
Do u know of any covers with two spen straps and also uses the entire front flap as a stand over the ****ty folding covers ?
Click to expand...
Click to collapse
it doesn't tip over at all. Perfectly stable
ScottBroker said:
it doesn't tip over at all. Perfectly stable
Click to expand...
Click to collapse
+1
This is my favorite. https://smile.amazon.com/gp/product/B07GXDCGLQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1